these people and the products they produce are the BEST in the industry. been putting more power down without any issues than what they are rated for.. THANK YOU
We sell all of our transmission parts through authorized Sonnax distributors. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out, and have a great day!
Do one for the 41te we can use the updated 42rle jeep input clutch retainer and drum update with more clutches my pt cruiser flys with a full build and 8 bolt billet tc connected to the flex plate . Mines has a 5 oinion planet too
Good video the knowledge I got from this video is to just do a few inexpensive mods / upgrades to the 4l80e and just trash can the 4l60e when it comes down to the dollar verses dollar
Our product support team would be happy to help you. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
Hi Davy! No, we do not offer complete transmissions. We design and manufacture top-of-the-line parts for transmissions, torque converters, and drivelines. Feel free to visit our website to learn more: www.sonnax.com. Thanks for reaching out, and have a great day!
I have a a Hummer H3 with a 3.7 liter inline 5 I want my 4L60 to work easier with the 245 horsepower. Would a level 3 Sonnax upgrade be compatible. I would like the best 4L60 I can have.
Hi Daniel, our tech team would be happy to help you. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
I have a 98 gmc jimmy sle 4dr 4x4. The previous owner replaced the trans with a jasper unit and while I haven't had any problems as yet, I just don't trust it. What kit do you make for a total rebuild?
We don't offer complete rebuild parts (clutches, seals, gaskets, etc.) but we do have plenty of options for a solid rebuild. Just keep in mind that if the Jasper warranty was transferable, making any changes might void the warranty. Check out what we have available at www.sonnax.com/units/455-4l60-e, and if you have any questions, our sales team would be happy to help via email at info@sonnax.com, or phone at 800-843-2600. Hope this helps, thank you for reaching out!
Overall the shift points related to engine RPM do not require reprogramming, etc. As for ratio codes, etc., we can confirm the 77284-K 2.84 ratio input carrier kit does not require PCM/Trans computer reprogramming to adjust for the closer ratio when used in 4L60-E and 4L65-E applications. 2007-Later 4L70-E applications have an added input speed sensor, and even on these we have never heard of it setting a ratio code or requiring reprogramming.
Great video.In My 4L60e,in my 2000 Chevy s10,I was driving and noticed it slipping a little.All of the sudden it quit pulling.Like it went to neutral.Next day it worked until it got warm,then nothing.What you think.
Hi Robin, thanks for your comment and question! Our product support team is available to help with any questions related to Sonnax products, but for general tech questions, we'd recommend contacting our friends at ATSG or ATRA for assistance. Hope that helps. Thanks again, and good luck! • ATSG: www.atsg.us/ • ATRA: www.atra.com/
Does this go for all 4l60e transmissions with any engine or is this just for the corvette I’m just looking into what I’d want to get for my project I plan to start next year.
All 4L60-E, 4L65-E and 4L70-E transmissions. Check out the build charts here as a great starting point: www.sonnax.com/tech_resources/617-4l60e-performance-heavy-duty-transmission-build-guides. And feel free to reach out to our product support team with any questions. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
So i purchased and installed the performance pack in my 2003 4L60 E. Installed most of the components with the exception of the band servo components. The kit doesn't come with a new o-ring for the servo case cover. Why is this? There should be no reason to have to purchase a separate o-ring to complete the instillation of this kit. And for first timers attempting to install this kit themselves, do yourself a favor and order a replacement separator plate and gaskets for your model year application. Ive yet to see a separator plate with any miles on it not have a check ball seat either worn, and in one case, blown strait through the separator plate. And besides, you'll need the gaskets anyways as the Sonnax kit obviously doesn't come with new gaskets. Save yourself the headache and do the job right the first time. Other that not being able to update the band servo components yet, (until I get a new o-ring), the kit works as designed. No banging hard shifts at light throttle, but noticeably firmer shifts under spirited driving.
Hi racrx7, thank you for choosing Sonnax products for your project. We hear your comments loud and clear, and appreciate your feedback. Our explanation is that this kit and instructions were initially prepared for the transmission rebuilder professional who is familiar with and likely to have these extra parts readily on hand. We know there is increasing desire for more comprehensive kits/instructions for folks like yourself, and we are working to make more of that available. Thanks again for the feedback, and have a great day!
Sonnax, no worries. I’m satisfied with the performance of the Performance pack. As a retired ASE mechanic, I understand the hows and whys of component functions. This is the main reason I chose Sonnax over other brands. Pin-less billet accumulator pistons are superior to the OEM ones. 👍🏻
Hi Junior, this list contains recommended parts for your level 3 build, but all parts are sold separately. The way to purchase our transmission parts is through authorized Sonnax distributors, and they will be able to help you out with any pricing questions. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out!
Hi! You can easily find the distributor nearest you right here on our website: www.sonnax.com/distributors. Thanks for reaching out, and have a great day!
Our product support team would be happy to help you. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
We sell all of our transmission parts through authorized Sonnax distributors. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out, and have a great day!
@8:23 "the only way to eliminate pwm...." Does that mean I can get a later model 4l60 to work on my 94? I'm asking because I read that one of the differences in years is the fact that not all years used pwm.
Hi, our tech team would be happy to help you directly. They can be reached via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
Will it hurt anything if I run full line pressure all the time? Will your tss valve still compensate when the converter is in lockup? How about wiring it for full manual shifting all the time? Is ecessive pressure to the lockup clutch the main cause of thrust surface wear? What power level should I consider anti balloon plates? Im shooting for 550-600 hp flywheel hp. About a 50/50 drag race to street use ratio, so should I keep the 4l60e or just go with a th400? I like the idea of overdrive and lockup but Im worried about durability too.
Hi poncoolride, our tech team would be happy to help answer all of your questions. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out, and have a great day!
Thanks for your question - yes, this Level 3 Build can absolutely handle that power and more. However, if your Sierra is 2WD, that's one of the least complex vehicles to swap a 4L80 into. There are costs and considerations either way, but for most applications, the most straightforward approach is to build the 4L60 to handle the power. Sonnax has upgrades to improve the durability of a stock transmission whichever way you want to go with this build. Hope this helps!
@@KLEPTO408 You're welcome, good luck with your truck! If you get the build together and want to share a photo of the truck or the parts you're using on the Sonnax Facebook page or Instagram, we'd love to see it.
Hi Johann, Have you checked out our 4L60/E build guide yet? If not, that would be a great starting point: www.sonnax.com/tech_resources/617-4l60e-performance-heavy-duty-transmission-build-guides. If you have any specific build questions, our product support team would be happy to help. They can be reached directly via email at info@sonnax.com, or phone at (800) 843-2600 or +1 (802) 463-9722. Thanks for reaching out!
@@sonnax Thank you for the response. Can you look into making one? I do like Sonnax for durability but I would also like much better fuel economy as well on long distance drives as I don't build for power handling.
@@shadowzedge5793 Due cost and complexity that is not something we will be producing. We have looked in-depth at this idea for other applications and determined it is simply not practical. Further, in general fuel economy gains only occur if you move the engine rpm into a more efficient range. Usually, lower rpm is more efficient but not always, so each vehicle, engine and final drive ratio will see different gains etc. Rather than tweaking an existing overdrive ratio slightly, we determined similar efficiency gains could be achieved simply by changing tire size and especially by improving vehicle aerodynamics. Both of which are less costly and easier to implement than a re-engineered low volume custom planetary gear set. Hope that helps, thanks again!
Hi Vln Ran, we sell all of our transmission parts and kits through authorized Sonnax distributors, so they'll be able to help you with any pricing questions. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Hope that helps. Thanks, and have a great day!
We sell all of our transmission parts through authorized Sonnax distributors. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out, and have a great day!
Hi Robert, if you're looking to purchase any of our transmission products, we sell through authorized Sonnax distributors and you can easily find the one nearest you right on our website (they'll also be able to help you with any pricing questions): www.sonnax.com/distributors. If you have specific questions about our products including which might be the best fit for your build, our tech team would be happy to help. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
Hi Alejandro, our product support team is available to help with any questions related to Sonnax products, but for general tech questions, we'd recommend contacting our friends at ATSG or ATRA for assistance. Hope that helps. Thank you, and good luck! ATSG: www.atsg.us/ ATRA: www.atra.com/
Hi Jerry, we sell all of our transmission parts and kits through authorized Sonnax distributors, so they'll be able to help you with any pricing questions. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out!
Hi Oscar, we did not set up any advertising nor are we involved with it in any way. Whatever you're seeing is something RUclips set up with their own advertisers. Thanks for your question, and have a great day!
Hi ehrndz87, not sure which part it is you're looking for, but you can see the full list of parts and part info in the Level 3 build here: www.sonnax.com/tech_resources/617-4l60-e-performance-heavy-duty-transmission-build-charts. Hope that helps, thanks!
Sonnax Hi Balanths Barkas, we sell all of our transmission parts and kits through authorized Sonnax distributors, so they'll be able to help you with any pricing questions. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out!
"Significant" .... it's shown on one of their slides at the end for level 3. Just like SnapOn.... they gonna get you in the door before they'll talk costs.
Wish you all would just put a price for the level 3 kit instead of having it as a list of parts that we have to contact a distributor just find a price for a single piece instead of a price for a kit.
Hi Felipe, we do not offer complete transmissions. We offer individual parts and kits sold through authorized Sonnax distributors, and they'll be able to help you with pricing questions. Find the one nearest you here: www.sonnax.com/distributors
@@sonnax I have an 03 Envoy 5.3 and really hate that steep shift from 1st to 2nd. How can I find a local builder that uses your planets for an application like me? Mostly city/highway driving and I want to supercharge or turbocharge the 5.3 in the future to bring it up to about 500HP.
Hi ChillCosmos, that's a great question. Since we sell our transmission parts through distributors, they are our direct customers. Unfortunately, we don't have a direct connection to a list of shops that use our parts. You should be able to ask any shop to use Sonnax parts in your build though, and see if they'll honor your request. Better performance for you, and less comebacks for them...it's really a win-win! ;) Thanks for reaching out, and good luck!
Don’t waste your time go the th400 route I popped two built 4l65e with a lot of this gear in it minus billet shaft etc first built box popped with 400rwhp only 200 miles next day lol second rebuild lasted 12 months after with ran a different stack up 3/4 is the dog shit of all in the 60e line and sunshell save your coin and headache buy a th400 still going strong 700rwhp turbo ls
Minus the billet shaft, etc--most of, huh? Did you ever watch their Smart Drum video? Extra friction in it, and it still has stock thickness steels. Why would anyone EVER do a "half ass" trans build, and put it behind any high horsepower engine? Talk about a "bad (dumb) move"--just asking for trouble that you're sure to GET--You've proven that, right? Smh...
@Bob Hoffman 4l60e is not in any way shape or form what anyone who is knowledgeable in the realm of transmissions would think of as a "robust" unit. You can throw everything you got at it but it's like putting lipstick on a pig. If you want something robust, start with one that's already made for torque and build up from there. Next, this is a forum to exchange ideas if you don't like it move to North Korea.
@Bob Hoffman hey was wondering how much power you think my 4L60e will hold, im building one now (02 4l60e out of an astro van converting it to 300mm to use behind a cam and head ls1) all Alto heg frictions except the 3/4 are Raybestos GPZ100 pinless accumulator pistons beast sunshell and a covette servo. Basically all other hard parts are stock also a few things im doing to prevent 3/4 clutch failure is setting 3/4 clearance to about .035 and sealing the servo exhaust port with a cup plug instead of using the check ball capsule also using hi-per blue apply pistons instead of the stock black rubber ones. Btw is it really bad to delete the pwm tcc apply, I use a fitzall tcc regulater valve that basically seals it up.
@Bob Hoffman oh all right lol this is actually my secound 4l60e I repaired a "built one" that went into my 99 trans am with an LS1 that thing didnt last 10k and I didnt wanna drop another couple of grand to have it built again. Actually what I found and I think this is one of the main reasons why they fail is the apply pistons and clutch clearance also to servo checkball capsule contributes to it. The 3/4 apply piston in my 4l60e had already went bad, when I took it apart I could not find anything wrong until I felt the molded rubber on that piston. The rubber had already gone hard and didnt seal very well I checked it against a new one I had laying around and sure enough it was bad, I think it caused a weak apply to the 3/4 clutch burning them up slowley over time anyway I dont use the stock black rubber pistons im using hi-performance blue pistons (better rubber) also in the manual clearance is set between .060 to .086 I thought that was way to much since I noticed the farther the 3/4 piston travels the more pressure blows by I actually seen that testing with air. So now im shooting for about .030 to .035 my current one I set clearance to .038 so far its been two months and its fine one more thing I replaced all accumulator Pistons with sonnax pinless pistons and plugged up the 3/4 accumulator piston(you dont need it) anyways ill put more miles on it see how long it lasts this one im building now im trying to make into a better unit with all the little tweeks I added to the repaired one.
@Bob Hoffman that wasnt the case in my transmission the 3/4 apply piston was clearly bad and didnt seal properly I dont see the need for a smart drum for something making under 500hp lots of guys use the stock drum with success, one thing I didnt mention in my last comment was when I built the input drum I replaced the apply ring and used a thicker backing plate (to get less clearance also reduce flex) even though im a novice and I do use some of the sonnex products I dont see why you should drop down $500 to eliminate a problem you can solve with $50 in parts. Now dont get me wrong if I was building something to handle more than 700hp and money was no object I would get a smart drum, smart shell, 5 or 6 pinion planetaries and billet output shaft but for what im building now it doesnt call for it. And thats my 2 cents lol
@@martinez1701a Late reply, I know, but the purpose OF the "Smart Drum" is to ELIMINATE ANY/ALL flexing of the backing plate. Even "normal" horsepower engines CAUSE that to happen. Spend the $ ONCE, and your 3-4 clutch pack problems are GONE, forever. The Sun Shell they offer is another wise move. Money IS always an "object," for most of us--why NOT put serious $ into your unit, so that it will STOP breaking? Once and DONE... LOL
How to transform your 4L60E equipped vehicle into a high-performance machine... Step 1. Remove 4L60E Step 2. Deposit old transmission in the TRASH (the only place it belongs) Step 3. Install a 4L80E Step 4. Proceed to beat the every-living snot out of it for the rest of your life.
Maby ? My '02 5.3, 1500, 4L60 (all stock) trans lasted 200k mil, rebuilt at 300k and it's out again at 402,000. With a new 380hp engine, think it's a good idea to upgrade that trans. ?? I'll look into it , drive on.
@Bob Hoffman I have a 3.7 liter inline 5 in my H3 Hummer I want the best 4L60 will a level 3 be compatible for a 245 horsepower engine. I'm not sure if it is stiffer. The engine needs a 5 or 6 speed transmission.
these people and the products they produce are the BEST in the industry.
been putting more power down without any issues than what they are rated for.. THANK YOU
Thrilled to hear that, thanks so much for the great feedback! We truly appreciate your support.
This guy knows a lot. close to a mad scientist..
I'm right in the middle of doing my 700 with all of this stuff he mentioned. I'm especially looking forward to the 1rst and second gear ratio change.
Fantastic! Thanks so much for your support!
You certainly have been a huge source of information for us in the field who are making these mods for a living. Thanks.
So glad to hear that, Jeffrey! Thanks so much for the great feedback, we really appreciate it.
Sonnax is the best there is!!!!
Thank you, Joseph! We truly appreciate your kind words.
Can't wait till I have money to buy a kit for my astro van.
Probably a level 1 since it's going to remain mostly stock power.
You should mention that new drum yall come out with. I would love to see you doing that
I need a level one overhaul kit
We sell all of our transmission parts through authorized Sonnax distributors. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out, and have a great day!
Do one for the 41te we can use the updated 42rle jeep input clutch retainer and drum update with more clutches my pt cruiser flys with a full build and 8 bolt billet tc connected to the flex plate . Mines has a 5 oinion planet too
Good video the knowledge I got from this video is to just do a few inexpensive mods / upgrades to the 4l80e and just trash can the 4l60e when it comes down to the dollar verses dollar
Precision transmission Amarillo Texas Richard Crich is the professor of Building a transmission using Sonnax parts.
Thanks i have been looking for his shop😊
@@nthastreettampaflorida1499He’s out of business from what I hear. Much better builders out there for the 4l60e.
When buying 77733-10kB transmission input shaft will I still need to get the 74678L-HD automatic transmission output shaft?
Our product support team would be happy to help you. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
Great video! Thanks
You're very welcome! Thank YOU for the feedback, we really appreciate it!
Hello... Do you sell already built level 1 or level 2 4L60 E trans???
Hi Davy! No, we do not offer complete transmissions. We design and manufacture top-of-the-line parts for transmissions, torque converters, and drivelines. Feel free to visit our website to learn more: www.sonnax.com. Thanks for reaching out, and have a great day!
@@sonnax Same to you & Thank you...
I have a a Hummer H3 with a 3.7 liter inline 5 I want my 4L60 to work easier with the 245 horsepower. Would a level 3 Sonnax upgrade be compatible. I would like the best 4L60 I can have.
Hi Daniel, our tech team would be happy to help you. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
I have a 98 gmc jimmy sle 4dr 4x4. The previous owner replaced the trans with a jasper unit and while I haven't had any problems as yet, I just don't trust it. What kit do you make for a total rebuild?
We don't offer complete rebuild parts (clutches, seals, gaskets, etc.) but we do have plenty of options for a solid rebuild. Just keep in mind that if the Jasper warranty was transferable, making any changes might void the warranty. Check out what we have available at www.sonnax.com/units/455-4l60-e, and if you have any questions, our sales team would be happy to help via email at info@sonnax.com, or phone at 800-843-2600. Hope this helps, thank you for reaching out!
when you change the gear ratio do you have to program the pcm?
Overall the shift points related to engine RPM do not require reprogramming, etc.
As for ratio codes, etc., we can confirm the 77284-K 2.84 ratio input carrier kit does not require PCM/Trans computer reprogramming to adjust for the closer ratio when used in 4L60-E and 4L65-E applications. 2007-Later 4L70-E applications have an added input speed sensor, and even on these we have never heard of it setting a ratio code or requiring reprogramming.
Great video.In My 4L60e,in my 2000 Chevy s10,I was driving and noticed it slipping a little.All of the sudden it quit pulling.Like it went to neutral.Next day it worked until it got warm,then nothing.What you think.
Hi Robin, thanks for your comment and question! Our product support team is available to help with any questions related to Sonnax products, but for general tech questions, we'd recommend contacting our friends at ATSG or ATRA for assistance. Hope that helps. Thanks again, and good luck!
• ATSG: www.atsg.us/
• ATRA: www.atra.com/
Probably low on fluid or time for a new transmission
Does this go for all 4l60e transmissions with any engine or is this just for the corvette I’m just looking into what I’d want to get for my project I plan to start next year.
All 4L60-E, 4L65-E and 4L70-E transmissions. Check out the build charts here as a great starting point: www.sonnax.com/tech_resources/617-4l60e-performance-heavy-duty-transmission-build-guides. And feel free to reach out to our product support team with any questions. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
So i purchased and installed the performance pack in my 2003 4L60 E. Installed most of the components with the exception of the band servo components. The kit doesn't come with a new o-ring for the servo case cover. Why is this? There should be no reason to have to purchase a separate o-ring to complete the instillation of this kit. And for first timers attempting to install this kit themselves, do yourself a favor and order a replacement separator plate and gaskets for your model year application. Ive yet to see a separator plate with any miles on it not have a check ball seat either worn, and in one case, blown strait through the separator plate. And besides, you'll need the gaskets anyways as the Sonnax kit obviously doesn't come with new gaskets. Save yourself the headache and do the job right the first time. Other that not being able to update the band servo components yet, (until I get a new o-ring), the kit works as designed. No banging hard shifts at light throttle, but noticeably firmer shifts under spirited driving.
Hi racrx7, thank you for choosing Sonnax products for your project. We hear your comments loud and clear, and appreciate your feedback. Our explanation is that this kit and instructions were initially prepared for the transmission rebuilder professional who is familiar with and likely to have these extra parts readily on hand. We know there is increasing desire for more comprehensive kits/instructions for folks like yourself, and we are working to make more of that available. Thanks again for the feedback, and have a great day!
Sonnax, no worries. I’m satisfied with the performance of the Performance pack. As a retired ASE mechanic, I understand the hows and whys of component functions. This is the main reason I chose Sonnax over other brands. Pin-less billet accumulator pistons are superior to the OEM ones. 👍🏻
@@racrx7 how much was the kit?
I have a 3.7 inline 5 would a level three be compatible for 245 horsepower. I would like the best 4L60 I can buy.
How much does a stage 3 usually cost ?
Hi Junior, this list contains recommended parts for your level 3 build, but all parts are sold separately. The way to purchase our transmission parts is through authorized Sonnax distributors, and they will be able to help you out with any pricing questions. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out!
now to convince my wife to allow me to get this lol
I cant seem to find a website to order the parts
Hi! You can easily find the distributor nearest you right here on our website: www.sonnax.com/distributors. Thanks for reaching out, and have a great day!
What if I already have a shift kit (transgo) would I still be able to do the sonnax servo modifications ?
Our product support team would be happy to help you. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
What's the best way to purchase or who's a good supplier of these parts?
We sell all of our transmission parts through authorized Sonnax distributors. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out, and have a great day!
@8:23 "the only way to eliminate pwm...." Does that mean I can get a later model 4l60 to work on my 94? I'm asking because I read that one of the differences in years is the fact that not all years used pwm.
Hi, our tech team would be happy to help you directly. They can be reached via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
hope u get a straight answer . I have a 95 i want to put in a 93. some say it cant be done. and work right.
Will it hurt anything if I run full line pressure all the time? Will your tss valve still compensate when the converter is in lockup? How about wiring it for full manual shifting all the time? Is ecessive pressure to the lockup clutch the main cause of thrust surface wear? What power level should I consider anti balloon plates? Im shooting for 550-600 hp flywheel hp. About a 50/50 drag race to street use ratio, so should I keep the 4l60e or just go with a th400? I like the idea of overdrive and lockup but Im worried about durability too.
Hi poncoolride, our tech team would be happy to help answer all of your questions. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out, and have a great day!
Would this be capable of 700-750 rwhp or should I just do a 4l80 build. It’s going to live in an 03 sierra with a 78mm turbo.
Thanks for your question - yes, this Level 3 Build can absolutely handle that power and more. However, if your Sierra is 2WD, that's one of the least complex vehicles to swap a 4L80 into. There are costs and considerations either way, but for most applications, the most straightforward approach is to build the 4L60 to handle the power. Sonnax has upgrades to improve the durability of a stock transmission whichever way you want to go with this build. Hope this helps!
Yeah it’s a awd and I was avoiding the 4l80 swap if at all possible. Thanks for the quick reply!
@@KLEPTO408 You're welcome, good luck with your truck! If you get the build together and want to share a photo of the truck or the parts you're using on the Sonnax Facebook page or Instagram, we'd love to see it.
What stage would you recommend for a 2011 Silverado 4l60e with 24x14 wheels transmission went out once I drove a day or 2 on the wheels
Hi Johann, Have you checked out our 4L60/E build guide yet? If not, that would be a great starting point: www.sonnax.com/tech_resources/617-4l60e-performance-heavy-duty-transmission-build-guides. If you have any specific build questions, our product support team would be happy to help. They can be reached directly via email at info@sonnax.com, or phone at (800) 843-2600 or +1 (802) 463-9722. Thanks for reaching out!
Can I run the 2.84input carrier in the level 2 build?
Yes, you can run it on any build! You'll just notice greater benefits with higher hp applications.
Is there an adaptation to change the overdrive ratio from 0.69 to something like 0.65 or even 0.61?
No, there is not. Thanks so much for reaching out, and have a great day!
@@sonnax Thank you for the response. Can you look into making one? I do like Sonnax for durability but I would also like much better fuel economy as well on long distance drives as I don't build for power handling.
@@shadowzedge5793 Due cost and complexity that is not something we will be producing. We have looked in-depth at this idea for other applications and determined it is simply not practical. Further, in general fuel economy gains only occur if you move the engine rpm into a more efficient range. Usually, lower rpm is more efficient but not always, so each vehicle, engine and final drive ratio will see different gains etc. Rather than tweaking an existing overdrive ratio slightly, we determined similar efficiency gains could be achieved simply by changing tire size and especially by improving vehicle aerodynamics. Both of which are less costly and easier to implement than a re-engineered low volume custom planetary gear set. Hope that helps, thanks again!
Where can i purchase this Level 3 for my transmission???....
Hi Vln Ran, we sell all of our transmission parts and kits through authorized Sonnax distributors, so they'll be able to help you with any pricing questions. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Hope that helps. Thanks, and have a great day!
3346504533
I build my high performance transmission with All the Sonnax parts you need for up to 1200hp
I just want a sonnax smart Input drum
We sell all of our transmission parts through authorized Sonnax distributors. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out, and have a great day!
Tucson Arizona here without giving you a VIN number what's my specific numbers out the door for delivery to a 99 Silverado 3 door 5.3 Z71
Hi Robert, if you're looking to purchase any of our transmission products, we sell through authorized Sonnax distributors and you can easily find the one nearest you right on our website (they'll also be able to help you with any pricing questions): www.sonnax.com/distributors. If you have specific questions about our products including which might be the best fit for your build, our tech team would be happy to help. They can be reached directly via email at sonnaxtechsupport@sonnax.com, or phone at (800) 843-2600 ext. 398. Thanks for reaching out!
??? New to this game, huh? lol
Firts time doing it with knowledge an got it to work but its slipping on 2 to 3rd an when i merger in to highways can you help me thanks in advance
Hi Alejandro, our product support team is available to help with any questions related to Sonnax products, but for general tech questions, we'd recommend contacting our friends at ATSG or ATRA for assistance. Hope that helps. Thank you, and good luck!
ATSG: www.atsg.us/
ATRA: www.atra.com/
How much for that kit?
Hi Jerry, we sell all of our transmission parts and kits through authorized Sonnax distributors, so they'll be able to help you with any pricing questions. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out!
Why does Sonnax have paid for ads on their channel for buyers of their parts. Smh.
Hi Oscar, we did not set up any advertising nor are we involved with it in any way. Whatever you're seeing is something RUclips set up with their own advertisers. Thanks for your question, and have a great day!
What’s the part/serial/unit number? My local sonnax distributor couldn’t find the kit.
Hi ehrndz87, not sure which part it is you're looking for, but you can see the full list of parts and part info in the Level 3 build here: www.sonnax.com/tech_resources/617-4l60-e-performance-heavy-duty-transmission-build-charts. Hope that helps, thanks!
show video TOP👏👏👏
How much is the cost for level 3 please
Sonnax
Hi Balanths Barkas, we sell all of our transmission parts and kits through authorized Sonnax distributors, so they'll be able to help you with any pricing questions. You can easily find the one nearest you right on our website: www.sonnax.com/distributors. Thanks for reaching out!
"Significant" .... it's shown on one of their slides at the end for level 3.
Just like SnapOn.... they gonna get you in the door before they'll talk costs.
Wish you all would just put a price for the level 3 kit instead of having it as a list of parts that we have to contact a distributor just find a price for a single piece instead of a price for a kit.
How much cost one of this high performance transmission? ₩
Hi Felipe, we do not offer complete transmissions. We offer individual parts and kits sold through authorized Sonnax distributors, and they'll be able to help you with pricing questions. Find the one nearest you here: www.sonnax.com/distributors
@@sonnax I have an 03 Envoy 5.3 and really hate that steep shift from 1st to 2nd. How can I find a local builder that uses your planets for an application like me? Mostly city/highway driving and I want to supercharge or turbocharge the 5.3 in the future to bring it up to about 500HP.
Hi ChillCosmos, that's a great question. Since we sell our transmission parts through distributors, they are our direct customers. Unfortunately, we don't have a direct connection to a list of shops that use our parts. You should be able to ask any shop to use Sonnax parts in your build though, and see if they'll honor your request. Better performance for you, and less comebacks for them...it's really a win-win! ;) Thanks for reaching out, and good luck!
@@sonnax I understand. Thank you for the reply.. this is what I call customer service. Have a great day :)
You're very welcome! And thank you, hope you have a great day as well!
Don’t waste your time go the th400 route I popped two built 4l65e with a lot of this gear in it minus billet shaft etc first built box popped with 400rwhp only 200 miles next day lol second rebuild lasted 12 months after with ran a different stack up 3/4 is the dog shit of all in the 60e line and sunshell save your coin and headache buy a th400 still going strong 700rwhp turbo ls
Minus the billet shaft, etc--most of, huh? Did you ever watch their Smart Drum video? Extra friction in it, and it still has stock thickness steels. Why would anyone EVER do a "half ass" trans build, and put it behind any high horsepower engine? Talk about a "bad (dumb) move"--just asking for trouble that you're sure to GET--You've proven that, right? Smh...
or you can install a 4l80e for less than the price of the input shaft.
@Bob Hoffman 4l60e is not in any way shape or form what anyone who is knowledgeable in the realm of transmissions would think of as a "robust" unit. You can throw everything you got at it but it's like putting lipstick on a pig. If you want something robust, start with one that's already made for torque and build up from there. Next, this is a forum to exchange ideas if you don't like it move to North Korea.
@Bob Hoffman hey was wondering how much power you think my 4L60e will hold, im building one now (02 4l60e out of an astro van converting it to 300mm to use behind a cam and head ls1) all Alto heg frictions except the 3/4 are Raybestos GPZ100 pinless accumulator pistons beast sunshell and a covette servo. Basically all other hard parts are stock also a few things im doing to prevent 3/4 clutch failure is setting 3/4 clearance to about .035 and sealing the servo exhaust port with a cup plug instead of using the check ball capsule also using hi-per blue apply pistons instead of the stock black rubber ones. Btw is it really bad to delete the pwm tcc apply, I use a fitzall tcc regulater valve that basically seals it up.
@Bob Hoffman oh all right lol this is actually my secound 4l60e I repaired a "built one" that went into my 99 trans am with an LS1 that thing didnt last 10k and I didnt wanna drop another couple of grand to have it built again. Actually what I found and I think this is one of the main reasons why they fail is the apply pistons and clutch clearance also to servo checkball capsule contributes to it. The 3/4 apply piston in my 4l60e had already went bad, when I took it apart I could not find anything wrong until I felt the molded rubber on that piston. The rubber had already gone hard and didnt seal very well I checked it against a new one I had laying around and sure enough it was bad, I think it caused a weak apply to the 3/4 clutch burning them up slowley over time anyway I dont use the stock black rubber pistons im using hi-performance blue pistons (better rubber) also in the manual clearance is set between .060 to .086 I thought that was way to much since I noticed the farther the 3/4 piston travels the more pressure blows by I actually seen that testing with air. So now im shooting for about .030 to .035 my current one I set clearance to .038 so far its been two months and its fine one more thing I replaced all accumulator Pistons with sonnax pinless pistons and plugged up the 3/4 accumulator piston(you dont need it) anyways ill put more miles on it see how long it lasts this one im building now im trying to make into a better unit with all the little tweeks I added to the repaired one.
@Bob Hoffman that wasnt the case in my transmission the 3/4 apply piston was clearly bad and didnt seal properly I dont see the need for a smart drum for something making under 500hp lots of guys use the stock drum with success, one thing I didnt mention in my last comment was when I built the input drum I replaced the apply ring and used a thicker backing plate (to get less clearance also reduce flex) even though im a novice and I do use some of the sonnex products I dont see why you should drop down $500 to eliminate a problem you can solve with $50 in parts. Now dont get me wrong if I was building something to handle more than 700hp and money was no object I would get a smart drum, smart shell, 5 or 6 pinion planetaries and billet output shaft but for what im building now it doesnt call for it. And thats my 2 cents lol
@@martinez1701a Late reply, I know, but the purpose OF the "Smart Drum" is to ELIMINATE ANY/ALL flexing of the backing plate. Even "normal" horsepower engines CAUSE that to happen. Spend the $ ONCE, and your 3-4 clutch pack problems are GONE, forever. The Sun Shell they offer is another wise move. Money IS always an "object," for most of us--why NOT put serious $ into your unit, so that it will STOP breaking? Once and DONE... LOL
How to transform your 4L60E equipped vehicle into a high-performance machine...
Step 1. Remove 4L60E
Step 2. Deposit old transmission in the TRASH (the only place it belongs)
Step 3. Install a 4L80E
Step 4. Proceed to beat the every-living snot out of it for the rest of your life.
4L80's aren't "bulletproof," okay? I worked WHERE they were manufactured... LOL
Dont bother with sonnax products on your daily driver, only race applications
Maby ? My '02 5.3, 1500, 4L60 (all stock) trans lasted 200k mil, rebuilt at 300k and it's out again at 402,000.
With a new 380hp engine, think it's a good idea to upgrade that trans. ??
I'll look into it , drive on.
@@gsp631 If your stock trans lasted til 200k miles how do you rebuild it at 300k? when it stopped working at 200k??
Thx cow muscle, I failed to say rebuilt "again" at 300k. Thanks for the correction. So I'll look into the sonnax stronger parts. :)
@Bob Hoffman I'm looking into this thank you much for the advice. :)
@Bob Hoffman I have a 3.7 liter inline 5 in my H3 Hummer I want the best 4L60 will a level 3 be compatible for a 245 horsepower engine. I'm not sure if it is stiffer. The engine needs a 5 or 6 speed transmission.