@@tylerhansen9135 Great question! No this is not a backwashing system. When looking for a plumber to install, I'd recommend verifying that they have experience installing tank based whole home water filtration systems. Make sure to hire a plumber that has both experience with these type of installations as well as positive customer reviews. Finally, I would recommend providing them with the installation instructions from the manufacturer to confirm they can complete the installation is is recommended. Specifically, make sure that they install a bypass so you can still have access to water when/ if you need to perform maintenance on the system (changing the sediment filter, replacing the media, etc.)
@@RossMalagarie It depends. If you only want a system to filter your drinking water, then a 5-stage RO system would be sufficient. However if you want clean, filtered water from every tap and faucet in your home (for brushing teeth, showering, etc.), then this system provides that benefit. Overall, a multistage RO system will reduce more contaminants than a system that only uses a few types of media.
I just had one of these systems installed in my house yesterday (along with a water softener). I wish I had done it sooner--after years of dry-skin, black manganese sludge on every faucet and our washing machine, I finally contacted a company to come out. When the rep tested our water he showed me that the chlorine level in our water (City of Atlanta) was extremely high (like swimming pool water). I expect the difference to be significant.
The main water line into my house is right next to the sewer line going out so with some minor PVC work, the installers joined the flush line right into the outgoing sewer line so it does not discharge into my grass at all--just goes out with the regular plumbing. My irrigation system is fed directly from the main line at the street so there is no salt in the irrigation system. If I wanted to pressure wash my house and use a faucet where water has gone through the filter, I can turn a couple of valves to bypass the system. Also, the gentler water on our laundry (and the elimination of the mineral deposits that would accumulate on the washing machine drum) is an added benefit (which was another reason we installed the system). So far we've noticed no real loss in pressure, the gunk on the faucets is pretty much gone (I cleaned them after installation and there hasn't been any noticeable buildup since). This was definitely not a cheap solution, rather an investment in the house and the quality of our water. I'd drink the water out of the tap without hesitation now, whereas for 10 years I would absolutely avoid it. The only thing I did not install is a reverse osmosis system which, from my understanding, is a highly inefficient system (uses like 3 gallons of water for every gallon it filters), and would not really improve the water quality any more than I could justify--I'm honestly not sure why I would have considered it and the sales rep didn't think it was a good idea either). Hope that helps.
I don't know what kind it is--it is part of a whole house system. The softening part has a large tank full of resin beads which is attached to a large, garbage can type container full of softening salt (I have to add more from time to time). @@trailboss78
Would be great to see you revisit the testing after a certain number of gallons has passed through the system to gauge the degradation of the filter medium
obviously the claims are BS. Depending on water going into the filter and usage there is super heigh chance of the amount of impurities taking way more space within 10 years than this filter therefore physically impossible
@@waterfilterguru are you able to briefly comment on how the system is performing thus far? I think that the lack of response from you takes away your validity as a reviewer. Perhaps they sponsored your review .
I have a water hardness of 21; these systems are capable up to 81 (per the manufacturer). I'm SO THANKFUL that I don't have to have a system that relies on me adding salt every month and have a water filter on every faucet. This is one of those "cost be damned" things as it'll save me money in the long run AND save me monthly maintenance fees. I have the system with the two large tanks and the smaller particulate filter (I don't have a well).
Sounds like you have the CF (carbon filter reviewed in this video) and the Futuresoft (salt-free conditioner) - thanks for sharing your feedback with the system, this is great to hear!
Just as an alternative possibility - check into the HydroFlow Pearl Plus - chemical free, no tanks, and implodes bacteria!. No, not affiliated, just getting rid of my old salt softener and discovered it. Def my way to go re softener/conditioner. I'm looking at Radient Life's all in one whole house, does Chlorines, VOCs, etc and flouride! @@2uplifestyle
You said you thought most of the lead was coming from plumbing within your house, yet the point of entry filter removed most of it, which would mean it's not coming from your pipes, but from the city water supply. This would make sense, as lead pipes were often used to connect houses to mains. The problem they had in Flint MI was the PH of the water changed when they changed the source, and the old lead pipes, which had a protective layer of oxidation, began dissolving into the water.
Kinetico has the best water treatment products…not a close second in the market….expensive but you get what you pay for. Non electric…dual tanks…cleans itself in soft water….best by far
After 6 months pressure decreased substantially.Called dealer,they suggested I bleach their system to improve pressure.After 3 bleaching pressure improved,but also had to adjust regen cycle to every day..Iron bacteria in my well here in Florida was terrible,now we have no rust stains,just have less water pressure.
Hey Ed, thanks for your comment! Sounds like you are on well water and have the Springwell WS well water filter system installed? Do you have any other water treatment systems? Iron bacteria will surely clog water treatment devices and fixtures, causing reduced water pressure. In addition to shocking your well (bleaching it), you might want to consider installing a chemical feed system to chlorinate the well. This will keep the iron bacteria at bay all the time, rather than shocking it every so often as it starts to build up agian.
@@waterfilterguru While the interior growth in the well can be controlled this way, the majority of iron reducing bacteria are in the aquifer. It is unlikely any in-well system would have much effect on those growths in the aquifer, though some growth downgradient of the well screen would be diminished. Bringing the water to ground surface and dealing with it there allows easier maintenance. And yes, someday the aquifer immediately adjacent to the well screen may clog from the bacteria.
Yeah it's typically cheaper to source the system and either DIY or hire a plumber to install compared to hiring a local company to spec a treatment system and do the install as well
I'm in an apartment so I can't do what you did but what I am doing is I have filters on all the shower heads and sink faucets and for are drinking water I first filter the tap water through my 4 black heavy metal filter Berky then from there I filter with one of those ionic water filter the one that looks like sand but it's ion exchange resin stuff (makes the water taste like real water again) then I have 2 1.5" n52 magnets by the water outlet on said ion exchange resin filter container with a gauss strength of about 2 Tesla so that it will restructure the water molecules which when tested it showed to be effective at changing the characteristics of the water molecules so that's good. I still want to do better but for now this will do
@@waterfilterguru no but I need to because the water has been so bad ever since COVID hit idk why but a few months after the lockdown started the water started to smell like bleach so strong the house would smell like a pool just from washing the dishes by hand in the kitchen sink! The water still smells like bleach and chemicals that's why I got the black heave metals filters for my Berky because it seems to be their best filter it's even silver impregnated to help with viruses and by the end of my 3 stage filtering prose's the water doesn't smell at all and actually taste good but I still miss my water from my home town (the Ozarks water bottleing company was the next town over we lived on top of that aquaphor that runs from Canada to the coast so I literally grew up taking baths and showers with ozarka bottled straight from are well but now that I'm in the city I complain daily lol. Have you ever tried restructured water? I was a sceptic at first until I talked to a guy that told me that all of the filter kits you can get online don't work you have to .make your own because the magnet strength needed is way more then what your going to get from some Walmart magnets you need a n52 neo that's a minimum of 2.5 or 3 Tesla which would be a n52 neo magnet that's around 1.75 to 2" square which can be expensive and dangerous if you let your kids play with it I mean you really have to make sure that you have it in a good safe holding arrangement so that you don't accidentally get metal close to it seeing as it could hold a small person up lol But it's crazy dude I've done tests where I set a cup of water on top of the neo magnet for about 1 minutes and light string so that all the water passes close to the magnetic fealed and water is slightly magnetic hints why the magnet has to be so strong Then I take the cup off and set it over by the controll water cup which is same exact kind of cup and the water is from the same exact filtered water jug and if you take a taste the one that was on the magnet tastes way smother and more hydrating on your throat if that makes any sense? And if you take both cups mark which one is which and put them in the freezer what I found was that the one that had been subjected to the magnet takes about 30% longer to freeze all the way through and has deep big cracks through it unlike the regular cup that looks like it just has regular frozen water in it And I got the same results every time I did the test which was 8 times!
One advantage of tank-based systems is that the media lasts a while! Keep in mind though that media lifespan is dependent on the incoming water quality & contaminants present - so each situation will be different, and the media may or may not last as long for some folks as others, before it needs to be replaced
So here's the rub: you get what you pay for. This is a great system for the first year or so with one caveat. It like Culligan and other single tank systems constantly uses raw/dirty water to back wash itself so your tank and media are always working against itself. because of this, and depending on the amount of TDS (total dissolved solids) and iron, these will continue to build up in the tank, effectively reducing performance on a continual basis. I do appreciate it has an on demand design similar to a Kinetico system except the one main area . Kinetico kills all other systems and has for many decades. The kinetico has a twin tank design is always back washing with clean, treated water. This is why they have an effective life for 2-3 decades. Also, saltless systems do little to help with tannins and long term PH or hard water issues like the Springwell. Is the Springwell "affordable" ? yes, but only on a short term basis such a selling your home. A proper long term system like a Kinetico can be $6k and up....but you get what you pay for. Appreiciate the content though.
Thanks for the comment - but it will be a bit misleading when some folks read it. I want to clear this up. You are comparing 3 completely different types of systems, which can't actually be compared to one another. It sounds like you are comparing water softeners or AIO well water filters, whereas this video was looking at the filtration system for municipally (city) treated water specifically. Not an AIO well water system. Not a water softener. Not a salt-free conditioner. All three of these types of systems (softeners, well water AIO filters, and filters for municipally treated water) are designed to target completely different water issues so can't be compared to each other. A few of the contaminants of concern you mentioned shouldn't even be a problem with municipal water. It's my goal to help folks better understand their water quality at home, not make it more confusing for them.
@@coltonwashburn6556 Well...I hear you, but to be fair.....Salt free systems do nothing for hard water and TDS in the home nor do they deal with protecting your water heater and other places water sit. Because of this when you flush a toilet or take a bath/shower, and because of oxidation, the water in the pipes leading away also are impacted by calcium, magnesium, and lime build up. Depending what is in the water, certain bacteria can flourish without being killed off and maintained by a sodium additive. Lastly, salt free systems are NOT certified to meet industry standards. Salt free systems typically use potassium chloride (yes, just like what is used in city systems and pools) so they are not truly "Pure water" systems as the advertising suggests. STE's are not great though. The best for long term with minimal salt usage? KInetico hands down. I have access to all and install all types. You have to ask yourself, why do I want/need a water treatment system in the first place. But once a person is fully educated...it is still their choice what goes into their home. Thanks for your response!
Another one fell for advertising hype and is simply parroting it. They are definitely not the only ones! I have a dual chamber softener that trades off chambers, replenishing the spent one with replenished one. Fleck controller. Fully programmable. Going on two decades now and good as ever. The *only* advantage of Kinetico is it works where electricity is unavailable. But you pay dearly for that feature, not only in initial cost but you don't get to customize it to your conditions and modify it if conditions change. It's all mechanical, there's no programming the cycle details. They also call for more maintenance of the water driven drive mechanism, which of course is recommended by only their approved service personnel so recurring costs are much greater as well. There's a massive profit to Kinetico so naturally it's going to be pushed hard, mostly to people who don't know how anything works. There might be somewhere hard well water under pressure is available but no full time electricity, in order to justify Kinetico. But typically electricity pumps the water up from the depths of the well and pressurizes it, so unless that's from a generator that only runs as needed or on an alternate energy system that runs out of power often, the electric controller saves big bucks. An off grid system could be used to keep a small battery charged and a tiny inverter power the softener. It used milliwatts to monitor and a couple watts when replenishing. So, getting what you pay for? In general true. In this case though you really have to pay for what you're getting!
been thinking about doing this for a long time but never dig in and actually look into various models, pricing, etc. That being said, I feel like pricing should have been gone over more. Cost of system, rough estimate for hardware not included, and perhaps most importantly, the cost of replacement filters since that's a maintenance cost every 6-9 months. If the system is only $900 but, for instance, each filter costs $250 or whatever.... I just know a lot of times it's those replacement parts they get you on. Printers, air purifiers, I think the small water purifiers..... Otherwise, not a bad video. I'll keep this in mind whenever I do get around to actually purchasing a unit.
The only replacement filter cartridge is the micron filter (the cartridge in the little blue housing), replaced every 6-9 months and costs ~$20. Besides that, you'll eventually need to replace the media in the tank, but it should last you years before it will need to be replaced (depending on your water quality). This is the advantage of tank based systems like this one! As for extra installation components, because every install is different it's difficult to pinpoint a specific cost.
Seems like that Lifesource/Beotron system I had. Basically, it was a charcoal filter. Definitely not a water softener which is mandatory in my very hard water area. Ripped that crap out and put in a Kenetico system. Works perfectly since 2016.
Water softeners and water filters (like the one in this video) are completely different systems, using different technology to address different water issues. They are not interchangeable or comparable. Water softeners remove hardness minerals that cause issues with plumbing and appliances but don't pose any health risk Water filters reduce contaminants that pose potential health risk or affect taste or smell of the water You can read more about the differences in detail here: waterfilterguru.com/water-softener-vs-water-filter/ Hope this helps clarify things!
@@nancydrew8146 Yes, you would install the water softener downstream (after) the filter like this. That way, the filter removes the chlorine or other disinfectant chemical which can damage the resin in the softener
I installed this same system about two years ago, still going strong. I installed it myself, I didn't even bother to bypass my garden hose, so that's filtered too. Based on my usage I estimate the filter is good for over 10 years. My biggest issue with my city water was chlorine smell, it's completely gone and my wife thinks it's even improved her hair, it's nice showering in filtered water.
@@turboparadise Tap Score by Simplelab (bit.ly/3OPs0Vd) - hands down the best testing I've come across and the company we use for all our testing projects
The one thing I am EXTREMELY interested in, is can it filter out hormones and that level of chemical contamination... If you read the book "Estrogeneration" by Anthony Jay. He outlines that a lot of hormones that was in the city water supply really isn't something the standard filtration process can deal with. I have a RO system for drinking water, but would love another system for the rest of the house. @Water Filter Guru - Do you have any comment on that level of filtration if you are aware?
There are a number of studies that show activated carbon can reduce hormones such as estrogen in water (link.springer.com/article/10.1007/s40710-014-0005-y), however this system hasn't specifically been tested to do so. Because activated carbon is one component of the mix media bed, you could assume there is some degree of reduction, but more testing to validate this would be necessary. It's great you already have an RO system in place - that would have been the next recommendation!
@@waterfilterguru Thanks for the response. I have it for drinking water, but we all know our skin still absorbs nutrients and particles during showering. so it would be nice to ensure everything is clean. :)
It all depends on your unique situation and what contaminants, and concentrations of those contaminants, are present. I wouldn't say it's necessary to performance test after just one year in most cases - the media should last multiple years. Again, the decision to add additional filtration downstream, such as a point of use filter (like an RO system) for your drinking water all depends on what contaminants are present. If the contaminants you have are reduced by the Springwell CF then additional filtration downstream would be redundant and unnecessary. However there are more difficult to remove contaminants present (uranium as an example), that the CF can't remove, then yes, additional filtration would be necessary. So, it all depends on the specific water situation - and this is why testing is so vital!
Nope this one (the CF) is only for municipally treated city water. For well water, you'll want to check out the SpringWell WS: bit.ly/3BICCPF No matter what, make sure to test your well water before making any purchase. We use Tap Score for all our testing and I can't recommend them highly enough: bit.ly/3qJM9R4 Use the data to guide your decision. The SpringWell WS is the best all-round option for well water, but you may have additional contaminants and/or higher concentrations of contaminants it's not capable of dealing with
I installed this filter without any difficulties. I installed a sediment filter before and after the springwell. The only issue is charcoal fine sediment getting through and coating the plumbing fixtures.
As a new homeowner, I'm just beginning my education journey about this stuff. Good intro. I hope you have a video on understanding PFOA levels in public drinking water. THat's what we are dealing with locally.
Hey Roger, thanks for your comment. Have you seen this video? ruclips.net/video/LjHc19Ou1Tg/видео.html it will give you a good understanding of the treatment technologies that can be used to reduce PFAs (including PFOA)
I am on well water from a 300 foot deep artesian well that has a heavy sulfur smell and taste. My current system was a DIY by the previous owner. It has a large outside Aerator with 4 nozzles to get out the smell of sulfur, then a AO Smith sediment filter, and finally a Whirlpool (WHES model) salt based water softener. One pump/tank is for the sprinkler system direct from the well, the other for the house after the Aerator. Water pressure is decent. All that said, several companies have come out to give me estimates, and two say scrap the outside aerator, water softener, and the AO sediment filter, and replace it all with their systems. Trouble is, their systems, including install range from a low of $3K to as much as $7K. The water tests at the well head before any treatment show Manganese at 0.1%, Sulfur at 5.0, TDS 271ppm, PH 7.5, ALK 178, HARDgpg 14.2, Iron 0.0, Ferrous 0.0, Ferric-Copper-Nitrite-Nitrate all at 0.0 Then after testing the water at the kitchen sink, they seemed surprised to see TDS at 295ppm and the Manganese 0.4 go up after treatment. Still the sulfur was down to 0.3, PH 7.5, ALK 179, HARDgpg 0.5, Iron 0.1, Ferrous 0.0, Ferric 0.1, and the rest all still at 0.0 So what are your thoughts about the water quality I have, and what I need to do to further reduce the smell & taste of the sulfur in the interior water? I would think keeping the Aerator and sediment filter is a no brainer, and then maybe scrapping the Whirlpool softener and adding XYZ of their products to improve what I currently have..
Well water situations are always so much more complex! It will be hard to help you just through the comments section here. If you want to shoot an email to info@waterfilterguru.com I'd be happy to take a closer look. Please attach any/all test results you have along with images of the current treatment system you have in place
@@ciscokidfab7595 I am still undecided on which system to get. Supposedly some think the Kinetico system is the best, but that is the one that the contractor wants around $7k for. I do not want to go on the cheap, but do not want to break the bank either.
@@MultiEviscerator likewise. It’s a hard call. For the past few years I have been told to bleach the well. That took care or the problem of sulfur for a few days, but am unwilling to try again because it’s “bleach”. I have also installed three large whole house filters in series; sediment, charcoal, ceramic. I change them every six months and the water is still less than desirable. If you do try this system or find one that works, relay back to me.
Thank you for the great review. I was looking at CF4 and AquaOX, Culligan, and Aquasanna. I'm more tempted to go for CF4 after this review. Although it does eliminate more contaminants and double the lifetime, AuqaOX is still very expensive. One question, do you still recommend an under-sink water filter or an RO filter for drinking? I know it varies greatly based on locations, but any suggestion for municipal water in most big cities (New neighborhood in Dallas to be particular). Thank you so much!
Great question! It really depends on what contaminants are present in your water - Have you tested your water? This is always the first step I recommend. Use the data from a laboratory test to guide your purchase decision. An additional point of use system for drinking way may or may not be needed. It all depends on if the whole home system you choose is capable of removing all the contaminants or not. Check out Tap Score for water testing - this is the company we use for all our testing purposes and and hands down the very best: bit.ly/3OPs0Vd
@meowmi1130 Which one did you go with? I've had a whole house aquasana for 10 years and researching change...I recall Aquasana's checked boxes for contaminants removal 10 years ago was thorough but now they tell me today it ONLY takes out chlorine and chloramine!
@@kdp8275 I ended up getting the CF4 following a friend's recommendation and he loved it. I also got the waterdrop RO with the instant water heater faucet. I am not sure if it's the best RO option but I drank a lot of tea and the instant hot water feature makes my life so easy :-)
We saw your video on the spring well purifying system and we’re very interested in it. However it can’t be used in a crawl space (which is what we have). Do you have any other suggestions for a whole house filtration system that could be used in a crawl space?
Hey Lacy, great question! Assuming you are on City Water & depending on how much space you have available, you may be able to get away with a cartridge based whole house filter, like one of these: - Evo E-1000 bit.ly/3SwKURB (evowatersystems.com) - Home Master HMF3SdgFeC bit.ly/3dWxbo8 (homemaster.com) Keep in mind that you'll need a bit more room below the filter housing so that you can remove them to replace the filter cartridges.
Possibly create a loop. Bring the water supply line out of the crawl space into a nearby room. Filter the water in that room and send it back into the crawl space.
Keep in mind it all depends on the specific water situation - an additional RO may or may not be necessary depending on what contaminants are present. That's why it's always so important to test first, so you know exactly what you're dealing with!
I could not see to be sure, but the pure white PVC pipe used in the video is not for drinking water. you need CPVP, it has a yellow tint to it and a yellow stripe.
@@waterfilterguru upon further research not all water suppliers chlorinate their water, so if this is well water, regular PVC is fine. my lack of knowledge
@@OhioBahn440 No, thank you for the comment. Looking into this now. The home is on city water (the system in this video is intended for use with city water). Stay tuned. Much appreciated!
I just installed one myself... and I have white particulate constantly coming from the system from the sediment filters... how long did it take for your system to first run clean?
Good catch! I just reached out to my contact at SpringWell about this. They've informed me that only ~5% of customers actually even do a return. This tells me the vast majority of folks are satisfied with their purchase so it won't even matter!
I would love to put that system in hopefully the Price Is Right. I have a whole house filter system now but does not go after bad things just sediment.
Yep, a sediment filter will only remove particles suspended in the water like dirt, sand, grit, oxidized iron (rust), etc. They will not reduce any chemicals, metals, or other contaminants. I recommend testing your water first before deciding on a treatment system. Check out Tap Score by Simplelab for testing, hands down the best bit.ly/3OPs0Vd You can then use the test data to guide your purchasing decision to make sure you're getting something capable of removing the contaminants of concern!
I'm new to this. Looks like this is designed for pre treated biologically safe water, right? What happens if there is a break in the water main and a boil water advisory due to water contamination? I guess my concern is that after they fix the break, any ecoli or other germs that make their way downstream will be captured by this filter and released after the boil water advisory is over. What are your thoughts?
The media in the filter will not capture bacteria or other microorganisms - they would flow through. If the possibility of this situation is a concern in your area, you could consider installing a UV system downstream of the tank based system. Then, if a boil water advisory did happen, you would be protected against any biologicals that might make their way though the system waterfilterguru.com/best-uv-water-purifier-systems/
Under no circumstances trust that the government is making things safe even under good circumstances. Just the past few years alone is proof of that. Get something to kill virus/germs/parasites.
Thanks for watching and the feedback! You can check Tap Score's city water project to get a general idea of the contaminants found in homes throughout Westminster here citywater.mytapscore.com/CO/Westminster
To stop bacteria, viruses, and cysts you need to filter down to .2 microns. This system will not stop these contaminants. You will need to add an additional filter inline and will need to change it more often because it filters so small but it will give you the "safe" water this system promises but cannot provide.
This system is intended for use with municipally treated water, which shouldn't have biological contaminants (bacteria, virus, cysts) due to disinfection at the treatment plant. If you are concerned with biologicals, possible due to a boil water advisory, you could install a UV system downstream.
@@bestyoutubernonegraternumber1 Not wrong, the only time biological contamination from municipally treated water should be a concern is in the event of a boil water advisory. If the system is functioning properly there will be enough residual disinfection chemical (chlorine or chloramine) to protect the water from biological contamination in the distribution system
It would depend on what contaminants in the water source are increased by the fracking activity. There are over 1,000 contaminants that can be imparted to a water source by shale gas exploration (source: www.urmc.rochester.edu/news/story/study-links-fracking-drinking-water-pollution-and-infant-heath)
Thanks for watching and for your feedback! The 5-mircon filter is installed post-filtration to capture any of the media that might escape the tank, so it does not get into the home's plumbing system.
I have the same system. I was surprised that the sediment filter went after the carbon tank rather than before it.... Reason is that it's purpose is stopping the carbon sediment coming out of the tank.
I find it's a little misleading when you leave out from the 'to be desired list' that it isn't designed to remove fluoride from the water. And this info is only included at the very end without much ado. :( A lot of people will have missed out on this and be continually contaminated by the awful byproduct of aluminum that we are being poisoned with.
Not all systems are capable of reducing fluoride - including the one reviewed in this video. In fact, most whole home systems are not capable of reducing fluoride. Fluoride is a difficult to remove contaminant, requiring specialized bone char carbon media, reverse osmosis, or activated alumina which are not commonly used in whole home POE systems. You might find this article helpful to learn all about it: waterfilterguru.com/how-to-remove-fluoride-from-water/ You have a couple options to reduce fluoride: 1) Add an additional fluoride removal cartridge filter downstream of a tank based system (like the one in this video). Something like this geni.us/WJAFPBP OR 2) Install a different whole house tank based system, specific for fluoride removal like the US Water Systems BodyGuard fluoride specific system geni.us/N8diO6 OR 3) Use a point of use filter to remove the fluoride from your drinking water. I'd recommend a reverse osmosis system like the Cloud RO geni.us/9ClI8J3 or Waterdrop G3 geni.us/rQekgwp or even a water filter pitcher like the Clearly Filtered pitcher geni.us/VsUZHW1
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
Let us know if you have any questions along the way. Have you had your water tested? Do you know what contaminants/ issues are present that need to be treated?
Right on, solid choice! Have you had your water tested first and been able to confirm this system is capable of addressing all the contaminants present?
@@waterfilterguru honestly, your review was more in-depth. I had a lot of particles but my main concern was the chlorine. We have hard water in Texas but the chlorine was hella high when the water consultant came out here and yes, their’s is sold at Costco but it was way too expensive so I’m happy and thankful you’ve done this in-depth review and water analysis! I am positive that I am going to with this one now. Quick question - I would like to learn more about their ion exchange since they are one the few and leader in this technology. Any insight on this exchange compared to other high end water softerner such as ecowater
I have a home that was built in 1962 so the piping is likely copper so I would like need to have a separate filtration for drinking water on top of the whole house filter. Correct? Would it be worth it to get the RO and UV add ons as well?
As a first step, I'd recommend getting a lab test of your water so you can identify the exact contaminants and concentrations that are present which need to be treated. Then you can use the lab testing data to guide your purchase decision. Many folks do use a point of use treatment system like reverse osmosis for their drinking water. But again, it all depends on the contaminants present.
Great question! The best shower filers we've come accross are: Aquasana AQ-4100 (bit.ly/3rFRtp6) AquaBliss SF500 (bit.ly/3rWtUZD) Keep in mind most shower filters are really only designed to remove chlorine from water. Some like the Aquasana mentioned above also use a KDF media which reduces other chemicals and some heavy metals. Although some brands say their shower filters can reduce hard water minerals, the only way to actually "soften" water is with an ion exchange water softener system. No shower filter is truly capable of softening water.
Hey Chris, thanks for your comment and great question. This system is intended for use with municipally treated water, not well water. For well water with iron, you'd need to look at a water softener (like this one bit.ly/3xUMjJ1) or an oxidation/filtration iron specific filter (like this one bit.ly/3Ch1EWW). That being said, you'll need to make sure to take into account all the other contaminants that are present as well while identifying proper treatment for your well water. When was the last time you had it tested by a certified lab? Do you know what additional contaminants are present?
This looks like a good system, but it is not stand alone whole house as you imply for most water residential systems (including city). Most homes have water hardness way above 5, and this does nothing to deal with that calcium. For the whole house, that is best dealt with by installing a proper sized ion switched system (salt based softener). Perhaps the carbon in this system is adequate as a pre-stage for that. Note, I would place the 5um particulate filter before the filter in your video however, not after as you have shown. If one wants to drink the water in large quantities, they should filter at the end (under the sink), not the whole house alone, with a multistage filter system. Drink and cook water 95% from one faucet, and keep that facet clean (test regularly). Depending on the testing, that end system is likely to be best served by RO, with a dedicated carbon before and a 5um + second carbon after the pressure tank. If the testing shows only chlorine (used for bacteria at under 1.65 ppm), i would just use a final carbon +1um filter and call it good. People need to stop trying to achieve 100% removal of contaminates, especially without ongoing testing. Find the safe levels and then be well under them (ie 90% less), and test more often if you are worried. Don't replace filters that don't need replacing. Don't filter what doesn't need filtering. test, then replace. Don't drink hot water from your water heater, without further filtration (use filtered cold water only tap). If you want really clean water for your fish tank or car wash or window washing business, follow the above pre filter + ion switched filter + RO system with a DI filter and pressure boost.
Correct, to treat water hardness the best option is an ion exchange water softener which would be in addition to a filtration system like the CF in this video. Two separate technologies, targeting different water problems. The 5-mircon filter is installed post-filtration (as per the manufacturer instructions) to capture any of the media that might escape the tank, so it does not get into the home's plumbing system. Great to call out the importance of testing! It's a critical first step to take before investing in any water treatment equipment to ensure you are purchasing a system capable of addressing your needs!
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
Beyond drinking it if you shower with it your body absorbs it which basically is the same people don’t realize what ever you put on your skin goes thru your body
Correct, the CF is intended for use with municipally treated tap water. Well water is an entirely different game! When was the last time you had your well tested? Do you know what contaminants you're dealing with? The Springwell WS bit.ly/3Ch1EWW is a solid choice for iron, manganese, and hydrogen sulfide removal - but again, it all depends on the specific situation.
Awesome video. I was wondering if you would be making a series with regards to other company's whole house water systems. I just bought an APEC Water WH-SOLUTION-MAX15-FG system which looks amazing, but we will see how well it works for us in the long term.
No it does not. You have a couple options to reduce fluoride: 1) Add an additional fluoride removal cartridge filter downstream of a tank based system (like the one in this video). Something like this geni.us/WJAFPBP OR 2) Install a different whole house tank based system, specific for fluoride removal like the US Water Systems BodyGuard fluoride specific system geni.us/N8diO6 OR 3) Use a point of use filter to remove the fluoride from your drinking water. I'd recommend a reverse osmosis system like the Cloud RO geni.us/9ClI8J3 or Waterdrop G3 geni.us/rQekgwp or even a water filter pitcher like the Clearly Filtered pitcher geni.us/VsUZHW1
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
Our plumber told us to get a whole house water filter for our new build in Florida, because of the tendency of the Pex lines to leak over time due to the city water chemicals. We make our own water with a Droughtmasters Traveler atmospheric water generator, so we are drinking fluoride free water. Therefore, we just want to buy a filter that doesn't require any type of licensed professional installer.
If you're home is not connected to the municipal system, then there is no risk of the disinfection chemicals or byproducts entering your home's plumbing system. Is your plumbing still connected, even though you generate water with the atmospheric generator? Most systems can be installed DIY. Just make sure to read the warranty - sometimes it's stipulated that the warranty is voided if the system is not installed by a licensed professional.
@@waterfilterguru thanks for answering so fast! We just use the water machine to produce six liters a day drinking water. Our new home will be connected to city water for showering, laundry, etc. Just want to put a whole house filter to avoid corrosive leaking of the pex lines over time. According to our favorite plumber!
@@claudiahansen4938 Gotcha! Do you know if the water supplier uses chlorine or chloramine to disinfect the water? Alternatively, you could simply install a system that uses catalytic carbon (like the Springwell CF in this video) which is capable of reducing both of those disinfection chemicals. This will provide the protection for your home's plumbing you are looking for.
@@waterfilterguru Springwell is not doing good!! I've been using Aquasana like 8 years now...luckily I was looking around for the customer review...Springwell not very well! Thank you for the info!
Mine is made by Maytag...costed 8k a 2 part system for salt and filtration... the only maintenance is add the salt softener other than that the company will take care everything else
@Water Filter Guru yes my skin is not dry when coming out of the shower or washing hands plus a have aquariums... and my town uses a lot of chlorine I hear TX have the 2nd worse water lol
I recommend a data-driven approach to selecting water treatment equipment. Check out this video where I explain the process step by step: ruclips.net/video/JU4sPer1944/видео.html Water quality varies drastically from place to place, and what might be best for one situation may not be sufficient for another.
Hey John, this depends on your water source and the contaminants you are trying to remove. Have you had your water tested? Do you know what contaminants are present?
@@johnknightiii1351 No video yet, but I highly recommend Tap Score by Simplelab - hands down the best and the company we use for all our testing bit.ly/3OPs0Vd As a side note, the softener only targets hard water so won't be reducing additional contaminants. Testing after the softener should be sufficient to find out what you're dealing with.
I read that carbon filters that don't have a backwash system will grow bacteria over time. How does Springwell's system prevent this over the life of the system (10 years)?
Bacteria growth is a potential risk with any POE system due to the fact that these systems remove the residual disinfection chemicals. A post-filtration UV system can be used to inactivate any bacteria that might grow in the system. That said, it's best practice to monitor any POE system for bacteria growth and take appropriate action (replacing media, filters & sanitizing the system) if bacteria are detected.
@@waterfilterguru Thanks. How do you monitor the system for bacteria growth? Send a sample out every year? And, if that is the case, do you have a recommendation on where to send a sample?
I live near a rocket facility that was testing some sort of nuclear work and had an explosion downward in the ground. They are in the mountain behind our house. Everyone claims the water is safe. Any suggestions on how to test and a filtration system that we could strive for?
For sure! Tap Score by Simplelab is hands down the best lab testing available and the company we use for all our testing bit.ly/3OPs0Vd We'd really have to take a look at the testing data to be able to provide any sort of recommendations or suggestions to consider
Hey again Tyler! We just announced a giveaway where we'll be giving out 5 Advanced Tap Score tests. It ends on March 31, but if you want to enter you could have a chance to get one for free! waterfilterguru.com/giveaway/
I have hi nitrate levels. What would you suggest? I feel like local companies wanna sell me the Cadillac of water systems which just isn't in the budget. Thanks
Hey thanks for your comment - great question. Are you on well water? What other contaminants are present? Ion exchange or Reverse Osmosis are typically good options for nitrate reduction, but it also depends on the overall water quality and what else is present.
@waterfilterguru thank you for your time and response. I am on well water. My ph level is slightly elevated but the nitrate level is in need of attention.
You have a couple options to reduce fluoride: 1) Add an additional fluoride removal cartridge filter downstream of a tank based system (like the one in this video). Something like this geni.us/WJAFPBP OR 2) Install a different whole house tank based system, specific for fluoride removal like the US Water Systems BodyGuard fluoride specific system geni.us/N8diO6 OR 3) Use a point of use filter to remove the fluoride from your drinking water. I'd recommend a reverse osmosis system like the Cloud RO geni.us/9ClI8J3 or Waterdrop G3 geni.us/rQekgwp or even a water filter pitcher like the Clearly Filtered pitcher geni.us/VsUZHW1
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
It does not. You have a couple options to reduce fluoride: 1) Add an additional fluoride removal cartridge filter downstream of a tank based system (like the one in this video). Something like this geni.us/WJAFPBP OR 2) Install a different whole house tank based system, specific for fluoride removal like the US Water Systems BodyGuard fluoride specific system geni.us/N8diO6 OR 3) Use a point of use filter to remove the fluoride from your drinking water. I'd recommend a reverse osmosis system like the Cloud RO geni.us/9ClI8J3 or Waterdrop G3 geni.us/rQekgwp or even a water filter pitcher like the Clearly Filtered pitcher geni.us/VsUZHW1
@@waterfilterguru thank you very much for the quick response. I do have a reverse osmosis system but it wastes so much water that my bill skyrocketed. So that's why I'm looking for another system. Filtering out fluoride is the most important thing for me as well as not wasting water like the RO does
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
Hi - Thank you for making this video. Could you share your thoughts on when it is appropriate to get a salt based filtration system vs a salt free system?
Hi there, great question! So you are referring to salt-based ion exchange water softeners and salt-free water conditioners. Neither of these systems are filters, and they are intended to treat water hardness and not remove contaminants. A water softener or conditioner would be used in conjunction with a water filter (like the one in this video), if you need to treat a hard water issue. Check out this article to learn all about the differences between the two: waterfilterguru.com/water-softener-vs-water-conditioner/
Seems like a good to great system. I really like the minimal filter changes required but I'm confused/concerned that the sediment filter is inline AFTER the primary filter. Since we're on a well and have a LOT of sediment, I'm afraid this sequence could dramatically shorten the life of the filter media. Thoughts?
First things first, the CF system described in this video is intended for municipally treated water, NOT well water. For well water, you might want to consider the WS system (depending on what contaminants are present) - check out this video ruclips.net/video/BwrRpfsc0pU/видео.html Well water treatment is entirely different than city water, oftentimes much more complex and dealing with different water issues. Have you had your water tested by a certified lab? If you want, please feel free to email your lab test results to info@waterfilterguru.com and we can have someone take a look and provide any insight that might be helpful to you. Lastly to answer your question about the sediment filter. Because city water typically does not contain sediment (it's removed at the treatment plant) a sediment filter isn't necessary. In this case, the sediment filter is installed after the CF system in order to catch any particles of the media from the tank that might escape, so that they don't end up in the home's plumbing system.
That depends on a few factors such as what contaminants are in the water that need to be addressed and your daily water requirements, among other things. Distillation is one of the best methods of purifying water, and remineralizing is always recommended. That said, reverse osmosis would provide similar results, but with much less energy and time input required.
If I were to get the CF4 for instance, I presume that we'd still need some way to keep scaling down, yes? We don't like soft water units due to the slimy feel, so what other inexpensive option would we have?
Correct, this system does not address hard water. The best and only way to completely eliminate hard water is with a water softener, but if the feel of soft water is a deal breaker you could consider a water conditioner that will still work to protect your plumbing and appliances. Check out the Springwell Futuresoft bit.ly/3P0WfIQ They also have a CF + Futuresoft combined system where you'd probably get a better deal than if you bought each individually: bit.ly/3KOIkFQ
Hi Brian, Wanted to know your thoughts on Springwell 2 in 1 Filter + Salt Softener combo system. Is it as efficient as combining the Whole House Filter and Salt Softener individually? Appreciate your work. Thanks in advance.
Have you had the water tested? If not, I suggest starting there. We use Tap Score for all our water testing and I can't recommend them highly enough. These are their well water tests: bit.ly/3kJcnnp Without looking at the data, it's really hard to provide any specific suggestion
I am shopping for a whole house filtration system for a house I am building in Europe. However, I can't get over the fact that all that nicely filtered water flows via PVC pipes and fittings that leach PFAS chemicals.
The fittings used in most filtration systems are not made from PVC, but other types of NSF certified plastics. NSF certification ensures these materials do not leach chemicals into water. I'm not aware of any plumbing items that contain or leach PFAs chemicals - here's a full list of products that contain PFAs waterfilterguru.com/list-of-products-with-pfas/
This system is intended for use with treated city water. There are plenty of well water treatment systems out there! Well water is tricky because it can be so much more complex. Have you had your well water tested by a certified lab? Do you know what water problems are present that need to be addressed?
It all depends on what contaminants/ water issues are present that need to be treated. When was the last time you had a lab test done? Do you know what contaminants are present?
@Water Filter Guru its city water, but we have to truck it in currently into a 1000 liter storage tank. we would like to access lake water as we are waterfront on a 150 acre lake. Would something like this work with lake water as a source? We also have a UV sterilization tube we could install.
@@Leroylundberg24 The system is intended for use with municipally treated water - for treating lake water you might want to consider your own chemical treatment for disinfection, which could then be followed by this system to remove the disinfection chemicals and byproducts. I'd recommend checking with the manufacturer about using the system for this type of application, first, however
This one does reduce the chlorine. For fluoride you can filter it at the point of use for your drinking water, I'd recommend a reverse osmosis system. But if you want to address fluoride with a whole house filter, you might want to consider this one instead ruclips.net/video/TAE8YAzcar8/видео.html
It depends on the particle size of the microplastics present, but the system should be able to reduce down to 5 microns. For even better microplastic reduction, I'd recommend a system that uses a carbon block filter, as opposed to GAC. Check out the new Springwell cartridge based system (bit.ly/3UXPkmR) or the Evo E-1000 (bit.ly/3mzsFQZ)
Hey Sam, I don't have any specific installer recommendations, but you can use Colorado's licensed plumber search tool to find a licensed professional in Erie apps.colorado.gov/dora/licensing/Lookup/LicenseLookup.aspx
I'd recommend first testing the water. Rainwater collection can be tricky, and although you may think it's free of contaminate it's not. You'll definitely want to consider a disinfection system. Then use the lab data to determine what other treatment you might need
Skin and hair irritation can be caused by a number of different water issues, but a lot of the time it has to do with hardness and/or chlorine. This system removes the chlorine, but we would need a water softener to get rid of the hardness minerals. Are you having issues with your skin and hair while showering in the water in your home? Have you had the water tested?
Right on! We have a full guide on how to build your own POE filtration system, check it out here: waterfilterguru.com/diy-whole-house-water-filter-system/
Just to clarify....The only way to lower the water "pressure" is to install a regulator (pressure reducing valve). A filter that needs to be replaced will lower the amount of "volume" that passes through the pipes, air-raters and shower heads. You can have 200 lbs of pressure.... yet hardly any volume if it's trying to go through a pin-hole.
No we did not have any drop in pressure after installation. As long as the system is sized properly, it should not impact water pressure in most cases. Check out this article, you might find it helpful waterfilterguru.com/does-a-whole-house-water-filter-reduce-water-pressure/
🔥 Check out the Springwell CF whole house water filter here ➡ bit.ly/3z1Y2GZ
Does this system back wash water? Any advice when looking for a plumber to install? Thanks for your videos and info! Much appreciated!
@@tylerhansen9135 Great question! No this is not a backwashing system.
When looking for a plumber to install, I'd recommend verifying that they have experience installing tank based whole home water filtration systems. Make sure to hire a plumber that has both experience with these type of installations as well as positive customer reviews. Finally, I would recommend providing them with the installation instructions from the manufacturer to confirm they can complete the installation is is recommended. Specifically, make sure that they install a bypass so you can still have access to water when/ if you need to perform maintenance on the system (changing the sediment filter, replacing the media, etc.)
@@waterfilterguru Thanks! Great advice! I will be purchasing this system soon. Will perform water testing first with simple lab.
is this filter better than a 5 stage Reverse osmosis water filter? Can it filter more than a 5 stage reverse osmosis system?
@@RossMalagarie It depends. If you only want a system to filter your drinking water, then a 5-stage RO system would be sufficient. However if you want clean, filtered water from every tap and faucet in your home (for brushing teeth, showering, etc.), then this system provides that benefit. Overall, a multistage RO system will reduce more contaminants than a system that only uses a few types of media.
This video and channel is a service to humanity. Thank you so much. I've wanted whole house water filtration but didn't want to pay 10 grand.
Thanks for your comment and kind words! So glad you found it helpful
Sure who's filtration cost 10 grand?
@@paulrod53 Many well water treatment systems can cost in the thousands, depending on the water problems present.
@@paulrod53the Halo is one many of them
Exactly
I just had one of these systems installed in my house yesterday (along with a water softener). I wish I had done it sooner--after years of dry-skin, black manganese sludge on every faucet and our washing machine, I finally contacted a company to come out. When the rep tested our water he showed me that the chlorine level in our water (City of Atlanta) was extremely high (like swimming pool water). I expect the difference to be significant.
Congrats - I'm sure it will make a huge difference!
The main water line into my house is right next to the sewer line going out so with some minor PVC work, the installers joined the flush line right into the outgoing sewer line so it does not discharge into my grass at all--just goes out with the regular plumbing. My irrigation system is fed directly from the main line at the street so there is no salt in the irrigation system. If I wanted to pressure wash my house and use a faucet where water has gone through the filter, I can turn a couple of valves to bypass the system. Also, the gentler water on our laundry (and the elimination of the mineral deposits that would accumulate on the washing machine drum) is an added benefit (which was another reason we installed the system).
So far we've noticed no real loss in pressure, the gunk on the faucets is pretty much gone (I cleaned them after installation and there hasn't been any noticeable buildup since).
This was definitely not a cheap solution, rather an investment in the house and the quality of our water. I'd drink the water out of the tap without hesitation now, whereas for 10 years I would absolutely avoid it. The only thing I did not install is a reverse osmosis system which, from my understanding, is a highly inefficient system (uses like 3 gallons of water for every gallon it filters), and would not really improve the water quality any more than I could justify--I'm honestly not sure why I would have considered it and the sales rep didn't think it was a good idea either).
Hope that helps.
What kind of water softener did you install...?
I don't know what kind it is--it is part of a whole house system. The softening part has a large tank full of resin beads which is attached to a large, garbage can type container full of softening salt (I have to add more from time to time). @@trailboss78
@@trailboss78I applied for a solution that incorporates everything
Would be great to see you revisit the testing after a certain number of gallons has passed through the system to gauge the degradation of the filter medium
Great idea, and thanks for the suggestion. We will be doing this!
obviously the claims are BS. Depending on water going into the filter and usage there is super heigh chance of the amount of impurities taking way more space within 10 years than this filter therefore physically impossible
So far so good? Any updates?
I agree. I want to see how a system performs over its life.
@@waterfilterguru are you able to briefly comment on how the system is performing thus far? I think that the lack of response from you takes away your validity as a reviewer. Perhaps they sponsored your review .
I have a water hardness of 21; these systems are capable up to 81 (per the manufacturer). I'm SO THANKFUL that I don't have to have a system that relies on me adding salt every month and have a water filter on every faucet. This is one of those "cost be damned" things as it'll save me money in the long run AND save me monthly maintenance fees. I have the system with the two large tanks and the smaller particulate filter (I don't have a well).
Sounds like you have the CF (carbon filter reviewed in this video) and the Futuresoft (salt-free conditioner) - thanks for sharing your feedback with the system, this is great to hear!
So did this take care of your hard water issues? We also have very hard water and the mineral buildup is killing our appliances.
Just as an alternative possibility - check into the HydroFlow Pearl Plus - chemical free, no tanks, and implodes bacteria!. No, not affiliated, just getting rid of my old salt softener and discovered it. Def my way to go re softener/conditioner. I'm looking at Radient Life's all in one whole house, does Chlorines, VOCs, etc and flouride! @@2uplifestyle
We’re super happy with our CF4 (and SS4 and UV filter) from Springwell!
Thanks for sharing your experience, glad to hear it's working well for you too
You said you thought most of the lead was coming from plumbing within your house, yet the point of entry filter removed most of it, which would mean it's not coming from your pipes, but from the city water supply. This would make sense, as lead pipes were often used to connect houses to mains. The problem they had in Flint MI was the PH of the water changed when they changed the source, and the old lead pipes, which had a protective layer of oxidation, began dissolving into the water.
Great point! It was reassuring to see how well the system did remove the lead that was present
I believe they stopped adding the additive that prevented the lead pipes from breaking down too.
It depends GREATLY on whether or not it is Ferous or Ferric iron. The difference is very important.
Wow thinking about all the contaminants i consume just by drinking out of the sink... This would definitely bring me peace of mind!
Gross right? That's why a whole home system like this is the best option for safe water from every tap!
Kinetico has the best water treatment products…not a close second in the market….expensive but you get what you pay for. Non electric…dual tanks…cleans itself in soft water….best by far
Kinetico do offer solid products!
After 6 months pressure decreased substantially.Called dealer,they suggested I bleach their system to improve pressure.After 3 bleaching pressure improved,but also had to adjust regen cycle to every day..Iron bacteria in my well here in Florida was terrible,now we have no rust stains,just have less water pressure.
Hey Ed, thanks for your comment! Sounds like you are on well water and have the Springwell WS well water filter system installed? Do you have any other water treatment systems?
Iron bacteria will surely clog water treatment devices and fixtures, causing reduced water pressure.
In addition to shocking your well (bleaching it), you might want to consider installing a chemical feed system to chlorinate the well. This will keep the iron bacteria at bay all the time, rather than shocking it every so often as it starts to build up agian.
@@waterfilterguru While the interior growth in the well can be controlled this way, the majority of iron reducing bacteria are in the aquifer. It is unlikely any in-well system would have much effect on those growths in the aquifer, though some growth downgradient of the well screen would be diminished. Bringing the water to ground surface and dealing with it there allows easier maintenance. And yes, someday the aquifer immediately adjacent to the well screen may clog from the bacteria.
$900 is actually kind of amazing 😮 I'm def going to look into this for my home
Yeah it's typically cheaper to source the system and either DIY or hire a plumber to install compared to hiring a local company to spec a treatment system and do the install as well
Wow, you nailed it! Thanks to giving us clarity on whole house water filtering!
Glad it was helpful! Thanks for watching and for your feedback
I'm in an apartment so I can't do what you did but what I am doing is I have filters on all the shower heads and sink faucets and for are drinking water I first filter the tap water through my 4 black heavy metal filter Berky then from there I filter with one of those ionic water filter the one that looks like sand but it's ion exchange resin stuff (makes the water taste like real water again) then I have 2 1.5" n52 magnets by the water outlet on said ion exchange resin filter container with a gauss strength of about 2 Tesla so that it will restructure the water molecules which when tested it showed to be effective at changing the characteristics of the water molecules so that's good. I still want to do better but for now this will do
Sounds like a great setup! Do you know what contaminants are in your water? Have you had it tested by a certified lab?
@@waterfilterguru no but I need to because the water has been so bad ever since COVID hit idk why but a few months after the lockdown started the water started to smell like bleach so strong the house would smell like a pool just from washing the dishes by hand in the kitchen sink! The water still smells like bleach and chemicals that's why I got the black heave metals filters for my Berky because it seems to be their best filter it's even silver impregnated to help with viruses and by the end of my 3 stage filtering prose's the water doesn't smell at all and actually taste good but I still miss my water from my home town (the Ozarks water bottleing company was the next town over we lived on top of that aquaphor that runs from Canada to the coast so I literally grew up taking baths and showers with ozarka bottled straight from are well but now that I'm in the city I complain daily lol.
Have you ever tried restructured water? I was a sceptic at first until I talked to a guy that told me that all of the filter kits you can get online don't work you have to .make your own because the magnet strength needed is way more then what your going to get from some Walmart magnets you need a n52 neo that's a minimum of 2.5 or 3 Tesla which would be a n52 neo magnet that's around 1.75 to 2" square which can be expensive and dangerous if you let your kids play with it I mean you really have to make sure that you have it in a good safe holding arrangement so that you don't accidentally get metal close to it seeing as it could hold a small person up lol
But it's crazy dude I've done tests where I set a cup of water on top of the neo magnet for about 1 minutes and light string so that all the water passes close to the magnetic fealed and water is slightly magnetic hints why the magnet has to be so strong
Then I take the cup off and set it over by the controll water cup which is same exact kind of cup and the water is from the same exact filtered water jug and if you take a taste the one that was on the magnet tastes way smother and more hydrating on your throat if that makes any sense?
And if you take both cups mark which one is which and put them in the freezer what I found was that the one that had been subjected to the magnet takes about 30% longer to freeze all the way through and has deep big cracks through it unlike the regular cup that looks like it just has regular frozen water in it
And I got the same results every time I did the test which was 8 times!
Love it, with my current system I have to replace the filters every 3 years and they cost over $300 for all the filters.
One advantage of tank-based systems is that the media lasts a while! Keep in mind though that media lifespan is dependent on the incoming water quality & contaminants present - so each situation will be different, and the media may or may not last as long for some folks as others, before it needs to be replaced
@@waterfilterguru hi, how to know when needs to be replaced?
So here's the rub: you get what you pay for. This is a great system for the first year or so with one caveat. It like Culligan and other single tank systems constantly uses raw/dirty water to back wash itself so your tank and media are always working against itself. because of this, and depending on the amount of TDS (total dissolved solids) and iron, these will continue to build up in the tank, effectively reducing performance on a continual basis. I do appreciate it has an on demand design similar to a Kinetico system except the one main area . Kinetico kills all other systems and has for many decades. The kinetico has a twin tank design is always back washing with clean, treated water. This is why they have an effective life for 2-3 decades. Also, saltless systems do little to help with tannins and long term PH or hard water issues like the Springwell. Is the Springwell "affordable" ? yes, but only on a short term basis such a selling your home. A proper long term system like a Kinetico can be $6k and up....but you get what you pay for. Appreiciate the content though.
Thanks for the comment - but it will be a bit misleading when some folks read it. I want to clear this up.
You are comparing 3 completely different types of systems, which can't actually be compared to one another.
It sounds like you are comparing water softeners or AIO well water filters, whereas this video was looking at the filtration system for municipally (city) treated water specifically.
Not an AIO well water system.
Not a water softener.
Not a salt-free conditioner.
All three of these types of systems (softeners, well water AIO filters, and filters for municipally treated water) are designed to target completely different water issues so can't be compared to each other.
A few of the contaminants of concern you mentioned shouldn't even be a problem with municipal water.
It's my goal to help folks better understand their water quality at home, not make it more confusing for them.
I would never consider any type of salt based filtration product. Pure water vs Soft water.... no contest.
@@coltonwashburn6556 Well...I hear you, but to be fair.....Salt free systems do nothing for hard water and TDS in the home nor do they deal with protecting your water heater and other places water sit. Because of this when you flush a toilet or take a bath/shower, and because of oxidation, the water in the pipes leading away also are impacted by calcium, magnesium, and lime build up. Depending what is in the water, certain bacteria can flourish without being killed off and maintained by a sodium additive. Lastly, salt free systems are NOT certified to meet industry standards. Salt free systems typically use potassium chloride (yes, just like what is used in city systems and pools) so they are not truly "Pure water" systems as the advertising suggests. STE's are not great though. The best for long term with minimal salt usage? KInetico hands down. I have access to all and install all types. You have to ask yourself, why do I want/need a water treatment system in the first place. But once a person is fully educated...it is still their choice what goes into their home.
Thanks for your response!
Another one fell for advertising hype and is simply parroting it.
They are definitely not the only ones! I have a dual chamber softener that trades off chambers, replenishing the spent one with replenished one. Fleck controller. Fully programmable. Going on two decades now and good as ever.
The *only* advantage of Kinetico is it works where electricity is unavailable. But you pay dearly for that feature, not only in initial cost but you don't get to customize it to your conditions and modify it if conditions change. It's all mechanical, there's no programming the cycle details. They also call for more maintenance of the water driven drive mechanism, which of course is recommended by only their approved service personnel so recurring costs are much greater as well.
There's a massive profit to Kinetico so naturally it's going to be pushed hard, mostly to people who don't know how anything works.
There might be somewhere hard well water under pressure is available but no full time electricity, in order to justify Kinetico. But typically electricity pumps the water up from the depths of the well and pressurizes it, so unless that's from a generator that only runs as needed or on an alternate energy system that runs out of power often, the electric controller saves big bucks. An off grid system could be used to keep a small battery charged and a tiny inverter power the softener. It used milliwatts to monitor and a couple watts when replenishing.
So, getting what you pay for? In general true. In this case though you really have to pay for what you're getting!
@@elgringoec "get what you pay for.. pay for what you're getting" 🤣🤣
Perfect assessment! 👍👍
been thinking about doing this for a long time but never dig in and actually look into various models, pricing, etc. That being said, I feel like pricing should have been gone over more. Cost of system, rough estimate for hardware not included, and perhaps most importantly, the cost of replacement filters since that's a maintenance cost every 6-9 months. If the system is only $900 but, for instance, each filter costs $250 or whatever.... I just know a lot of times it's those replacement parts they get you on. Printers, air purifiers, I think the small water purifiers..... Otherwise, not a bad video. I'll keep this in mind whenever I do get around to actually purchasing a unit.
The only replacement filter cartridge is the micron filter (the cartridge in the little blue housing), replaced every 6-9 months and costs ~$20.
Besides that, you'll eventually need to replace the media in the tank, but it should last you years before it will need to be replaced (depending on your water quality). This is the advantage of tank based systems like this one!
As for extra installation components, because every install is different it's difficult to pinpoint a specific cost.
OMG after this video I'm definitely testing my water before buying anything, thanks so much for the info.
I'm glad you found it helpful!
@@waterfilterguru Which Whole House Water Filter do you recommend that includes Fluoride Removal? Thanks!
@@TheOssia Hands down the BodyGuard Fluoride Removal Filter by US Water Systems! Check it out here bit.ly/3VRa4Mf
Seems like that Lifesource/Beotron system I had. Basically, it was a charcoal filter. Definitely not a water softener which is mandatory in my very hard water area. Ripped that crap out and put in a Kenetico system. Works perfectly since 2016.
Water softeners and water filters (like the one in this video) are completely different systems, using different technology to address different water issues. They are not interchangeable or comparable.
Water softeners remove hardness minerals that cause issues with plumbing and appliances but don't pose any health risk
Water filters reduce contaminants that pose potential health risk or affect taste or smell of the water
You can read more about the differences in detail here: waterfilterguru.com/water-softener-vs-water-filter/
Hope this helps clarify things!
@@waterfiltergurucan you add a softener to this filter
@@nancydrew8146 Yes, you would install the water softener downstream (after) the filter like this. That way, the filter removes the chlorine or other disinfectant chemical which can damage the resin in the softener
I installed this same system about two years ago, still going strong. I installed it myself, I didn't even bother to bypass my garden hose, so that's filtered too. Based on my usage I estimate the filter is good for over 10 years. My biggest issue with my city water was chlorine smell, it's completely gone and my wife thinks it's even improved her hair, it's nice showering in filtered water.
Thanks for sharing your experience and feedback! 🤙
This looks like a great filtration system for the house, will definitely be considering adding one to my home!
Don't forget to test your water to find out what contaminants might be present first!
On top of this what reverse osmosis you recommend?
@@waterfilterguruwhat do you recommend to test my water
@@turboparadise Tap Score by Simplelab (bit.ly/3OPs0Vd) - hands down the best testing I've come across and the company we use for all our testing projects
@@617venkatesh Cloud RO! cloud-water-filters.sjv.io/jrOrdP
The one thing I am EXTREMELY interested in, is can it filter out hormones and that level of chemical contamination...
If you read the book "Estrogeneration" by Anthony Jay. He outlines that a lot of hormones that was in the city water supply really isn't something the standard filtration process can deal with. I have a RO system for drinking water, but would love another system for the rest of the house.
@Water Filter Guru - Do you have any comment on that level of filtration if you are aware?
There are a number of studies that show activated carbon can reduce hormones such as estrogen in water (link.springer.com/article/10.1007/s40710-014-0005-y), however this system hasn't specifically been tested to do so. Because activated carbon is one component of the mix media bed, you could assume there is some degree of reduction, but more testing to validate this would be necessary.
It's great you already have an RO system in place - that would have been the next recommendation!
@@waterfilterguru Thanks for the response. I have it for drinking water, but we all know our skin still absorbs nutrients and particles during showering. so it would be nice to ensure everything is clean. :)
great book
Should you do a 1 year water test update from using the system? And should you add smaller filters in the system to remove even small contaminates?
It all depends on your unique situation and what contaminants, and concentrations of those contaminants, are present. I wouldn't say it's necessary to performance test after just one year in most cases - the media should last multiple years.
Again, the decision to add additional filtration downstream, such as a point of use filter (like an RO system) for your drinking water all depends on what contaminants are present.
If the contaminants you have are reduced by the Springwell CF then additional filtration downstream would be redundant and unnecessary. However there are more difficult to remove contaminants present (uranium as an example), that the CF can't remove, then yes, additional filtration would be necessary.
So, it all depends on the specific water situation - and this is why testing is so vital!
Excellent content. Thank you for the comprehensive and honest review.
Glad it was helpful! Thanks for your feedback, it really helps!
Do you recommend this for well water as well? Or would you suggest another whole home water filtration system?
Nope this one (the CF) is only for municipally treated city water.
For well water, you'll want to check out the SpringWell WS: bit.ly/3BICCPF
No matter what, make sure to test your well water before making any purchase. We use Tap Score for all our testing and I can't recommend them highly enough: bit.ly/3qJM9R4
Use the data to guide your decision. The SpringWell WS is the best all-round option for well water, but you may have additional contaminants and/or higher concentrations of contaminants it's not capable of dealing with
I installed this filter without any difficulties. I installed a sediment filter before and after the springwell. The only issue is charcoal fine sediment getting through and coating the plumbing fixtures.
This is why the included 5-micron sediment filter is installed after the tank. What micron rating is the sediment filter you installed after the tank?
Thanks for this detailed video!
Glad it was helpful!
As a new homeowner, I'm just beginning my education journey about this stuff. Good intro. I hope you have a video on understanding PFOA levels in public drinking water. THat's what we are dealing with locally.
Hey Roger, thanks for your comment. Have you seen this video? ruclips.net/video/LjHc19Ou1Tg/видео.html it will give you a good understanding of the treatment technologies that can be used to reduce PFAs (including PFOA)
@@waterfilterguru I will check it out now. Thank you!
Happy to help! Let me know if you have any questions
Great content , keep it coming
Glad you liked it!
I am on well water from a 300 foot deep artesian well that has a heavy sulfur smell and taste. My current system was a DIY by the previous owner. It has a large outside Aerator with 4 nozzles to get out the smell of sulfur, then a AO Smith sediment filter, and finally a Whirlpool (WHES model) salt based water softener. One pump/tank is for the sprinkler system direct from the well, the other for the house after the Aerator.
Water pressure is decent.
All that said, several companies have come out to give me estimates, and two say scrap the outside aerator, water softener, and the AO sediment filter, and replace it all with their systems.
Trouble is, their systems, including install range from a low of $3K to as much as $7K.
The water tests at the well head before any treatment show Manganese at 0.1%, Sulfur at 5.0, TDS 271ppm, PH 7.5, ALK 178, HARDgpg 14.2, Iron 0.0, Ferrous 0.0, Ferric-Copper-Nitrite-Nitrate all at 0.0
Then after testing the water at the kitchen sink, they seemed surprised to see TDS at 295ppm and the Manganese 0.4 go up after treatment.
Still the sulfur was down to 0.3, PH 7.5, ALK 179, HARDgpg 0.5, Iron 0.1, Ferrous 0.0, Ferric 0.1, and the rest all still at 0.0
So what are your thoughts about the water quality I have, and what I need to do to further reduce the smell & taste of the sulfur in the interior water?
I would think keeping the Aerator and sediment filter is a no brainer, and then maybe scrapping the Whirlpool softener and adding XYZ of their products to improve what I currently have..
Well water situations are always so much more complex! It will be hard to help you just through the comments section here. If you want to shoot an email to info@waterfilterguru.com I'd be happy to take a closer look. Please attach any/all test results you have along with images of the current treatment system you have in place
@@waterfilterguru I sent it to you yesterday. I look forward to your reply when you have time to review everything.
@@MultiEviscerator good day, how did your situation work out. I have a similar situation.
@@ciscokidfab7595 I am still undecided on which system to get. Supposedly some think the Kinetico system is the best, but that is the one that the contractor wants around $7k for. I do not want to go on the cheap, but do not want to break the bank either.
@@MultiEviscerator likewise. It’s a hard call. For the past few years I have been told to bleach the well. That took care or the problem of sulfur for a few days, but am unwilling to try again because it’s “bleach”. I have also installed three large whole house filters in series; sediment, charcoal, ceramic. I change them every six months and the water is still less than desirable. If you do try this system or find one that works, relay back to me.
Great video, super informational 👍
Glad it was helpful!
You‘re taking out all the flavor! Good video, thank you
You're welcome thanks for watching
Thank you for the great review. I was looking at CF4 and AquaOX, Culligan, and Aquasanna. I'm more tempted to go for CF4 after this review. Although it does eliminate more contaminants and double the lifetime, AuqaOX is still very expensive.
One question, do you still recommend an under-sink water filter or an RO filter for drinking? I know it varies greatly based on locations, but any suggestion for municipal water in most big cities (New neighborhood in Dallas to be particular). Thank you so much!
Great question! It really depends on what contaminants are present in your water - Have you tested your water?
This is always the first step I recommend. Use the data from a laboratory test to guide your purchase decision. An additional point of use system for drinking way may or may not be needed. It all depends on if the whole home system you choose is capable of removing all the contaminants or not.
Check out Tap Score for water testing - this is the company we use for all our testing purposes and and hands down the very best: bit.ly/3OPs0Vd
@meowmi1130 Which one did you go with? I've had a whole house aquasana for 10 years and researching change...I recall Aquasana's checked boxes for contaminants removal 10 years ago was thorough but now they tell me today it ONLY takes out chlorine and chloramine!
@@kdp8275 I ended up getting the CF4 following a friend's recommendation and he loved it. I also got the waterdrop RO with the instant water heater faucet. I am not sure if it's the best RO option but I drank a lot of tea and the instant hot water feature makes my life so easy :-)
We saw your video on the spring well purifying system and we’re very interested in it. However it can’t be used in a crawl space (which is what we have). Do you have any other suggestions for a whole house filtration system that could be used in a crawl space?
Hey Lacy, great question! Assuming you are on City Water & depending on how much space you have available, you may be able to get away with a cartridge based whole house filter, like one of these:
- Evo E-1000 bit.ly/3SwKURB (evowatersystems.com)
- Home Master HMF3SdgFeC bit.ly/3dWxbo8 (homemaster.com)
Keep in mind that you'll need a bit more room below the filter housing so that you can remove them to replace the filter cartridges.
Possibly create a loop. Bring the water supply line out of the crawl space into a nearby room. Filter the water in that room and send it back into the crawl space.
Usually buy an RO single faucet in our homes . We are building a new home next year and will consider this instead.
Keep in mind it all depends on the specific water situation - an additional RO may or may not be necessary depending on what contaminants are present. That's why it's always so important to test first, so you know exactly what you're dealing with!
Much better filtering the whole house so you aren't bathing in bad water
I could not see to be sure, but the pure white PVC pipe used in the video is not for drinking water. you need CPVP, it has a yellow tint to it and a yellow stripe.
Hey thanks for your comment - we'll be following up with the company that installed this for us to check on this. Much appreciated!
@@waterfilterguru upon further research not all water suppliers chlorinate their water, so if this is well water, regular PVC is fine. my lack of knowledge
@@OhioBahn440 No, thank you for the comment. Looking into this now. The home is on city water (the system in this video is intended for use with city water). Stay tuned. Much appreciated!
@@waterfilterguru Any response from springwell regarding type of PVC that should be used with city water?
@@waterfilterguruaaaand ???
Just bought a system before seeing this video. About to install. This gives me hope that I purchased the right system.
Let us know how it goes!
I just installed one myself... and I have white particulate constantly coming from the system from the sediment filters... how long did it take for your system to first run clean?
@@CD-vb9fi I think it probably took somewhere between 15 minutes and a half hour. Did you flush the carbon filter first? Could that be an issue?
Satisfaction guarantee but -25% when you return + cost of shipping.
Definitely not satisfying with that return policy.
Good catch! I just reached out to my contact at SpringWell about this. They've informed me that only ~5% of customers actually even do a return. This tells me the vast majority of folks are satisfied with their purchase so it won't even matter!
I would love to put that system in hopefully the Price Is Right. I have a whole house filter system now but does not go after bad things just sediment.
Yep, a sediment filter will only remove particles suspended in the water like dirt, sand, grit, oxidized iron (rust), etc. They will not reduce any chemicals, metals, or other contaminants.
I recommend testing your water first before deciding on a treatment system. Check out Tap Score by Simplelab for testing, hands down the best bit.ly/3OPs0Vd
You can then use the test data to guide your purchasing decision to make sure you're getting something capable of removing the contaminants of concern!
I'm new to this. Looks like this is designed for pre treated biologically safe water, right? What happens if there is a break in the water main and a boil water advisory due to water contamination? I guess my concern is that after they fix the break, any ecoli or other germs that make their way downstream will be captured by this filter and released after the boil water advisory is over.
What are your thoughts?
The media in the filter will not capture bacteria or other microorganisms - they would flow through. If the possibility of this situation is a concern in your area, you could consider installing a UV system downstream of the tank based system. Then, if a boil water advisory did happen, you would be protected against any biologicals that might make their way though the system waterfilterguru.com/best-uv-water-purifier-systems/
Under no circumstances trust that the government is making things safe even under good circumstances. Just the past few years alone is proof of that. Get something to kill virus/germs/parasites.
Great Video!!! Arvada and Aurora pride themselves on the best water in the country, would be interesting to see what's in Westminster's.
Thanks for watching and the feedback! You can check Tap Score's city water project to get a general idea of the contaminants found in homes throughout Westminster here citywater.mytapscore.com/CO/Westminster
To stop bacteria, viruses, and cysts you need to filter down to .2 microns. This system will not stop these contaminants. You will need to add an additional filter inline and will need to change it more often because it filters so small but it will give you the "safe" water this system promises but cannot provide.
This system is intended for use with municipally treated water, which shouldn't have biological contaminants (bacteria, virus, cysts) due to disinfection at the treatment plant. If you are concerned with biologicals, possible due to a boil water advisory, you could install a UV system downstream.
@@waterfilterguruwrong, the pipes from the plant to your home are a major (THE major) factor.
What do you suggestible best?
@@bestyoutubernonegraternumber1 Not wrong, the only time biological contamination from municipally treated water should be a concern is in the event of a boil water advisory. If the system is functioning properly there will be enough residual disinfection chemical (chlorine or chloramine) to protect the water from biological contamination in the distribution system
@@keikelly8446 These are the top UV systems currently on the market waterfilterguru.com/best-uv-water-purifier-systems/
What about fracking contaminants?
It would depend on what contaminants in the water source are increased by the fracking activity. There are over 1,000 contaminants that can be imparted to a water source by shale gas exploration (source: www.urmc.rochester.edu/news/story/study-links-fracking-drinking-water-pollution-and-infant-heath)
You did an amazing job covering all angles, only recommendation would be doing the test without the 5 micron filter.
Thanks for watching and for your feedback! The 5-mircon filter is installed post-filtration to capture any of the media that might escape the tank, so it does not get into the home's plumbing system.
I have the same system. I was surprised that the sediment filter went after the carbon tank rather than before it.... Reason is that it's purpose is stopping the carbon sediment coming out of the tank.
I find it's a little misleading when you leave out from the 'to be desired list' that it isn't designed to remove fluoride from the water. And this info is only included at the very end without much ado. :( A lot of people will have missed out on this and be continually contaminated by the awful byproduct of aluminum that we are being poisoned with.
Not all systems are capable of reducing fluoride - including the one reviewed in this video. In fact, most whole home systems are not capable of reducing fluoride. Fluoride is a difficult to remove contaminant, requiring specialized bone char carbon media, reverse osmosis, or activated alumina which are not commonly used in whole home POE systems. You might find this article helpful to learn all about it: waterfilterguru.com/how-to-remove-fluoride-from-water/
You have a couple options to reduce fluoride:
1) Add an additional fluoride removal cartridge filter downstream of a tank based system (like the one in this video). Something like this geni.us/WJAFPBP
OR
2) Install a different whole house tank based system, specific for fluoride removal like the US Water Systems BodyGuard fluoride specific system geni.us/N8diO6
OR
3) Use a point of use filter to remove the fluoride from your drinking water. I'd recommend a reverse osmosis system like the Cloud RO geni.us/9ClI8J3 or Waterdrop G3 geni.us/rQekgwp or even a water filter pitcher like the Clearly Filtered pitcher geni.us/VsUZHW1
Use ozone,chlorine dioxide or h2o2..they burn fluoride
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
Looking at this system for my home and also looking at Kinetico as well...
Let us know which you end up going with and what you think about it
Just seeing what’s out there but I will be buying soon.
Let us know if you have any questions along the way.
Have you had your water tested? Do you know what contaminants/ issues are present that need to be treated?
i am planning to get this system because of the pricing as well as all the good reviews
Right on, solid choice! Have you had your water tested first and been able to confirm this system is capable of addressing all the contaminants present?
@@waterfilterguru honestly, your review was more in-depth. I had a lot of particles but my main concern was the chlorine. We have hard water in Texas but the chlorine was hella high when the water consultant came out here and yes, their’s is sold at Costco but it was way too expensive so I’m happy and thankful you’ve done this in-depth review and water analysis! I am positive that I am going to with this one now.
Quick question - I would like to learn more about their ion exchange since they are one the few and leader in this technology. Any insight on this exchange compared to other high end water softerner such as ecowater
This is an excellent video; very informative and easy to comprehend. I appreciate you♾💎
Glad it was helpful! Thanks for your comment
Just got one (CF1) with tax it was just over $1200 with the set up kit
Thanks for the updated Intel 🤙
I have a home that was built in 1962 so the piping is likely copper so I would like need to have a separate filtration for drinking water on top of the whole house filter. Correct? Would it be worth it to get the RO and UV add ons as well?
As a first step, I'd recommend getting a lab test of your water so you can identify the exact contaminants and concentrations that are present which need to be treated. Then you can use the lab testing data to guide your purchase decision.
Many folks do use a point of use treatment system like reverse osmosis for their drinking water. But again, it all depends on the contaminants present.
Great video very informative. Love the information and love the fact that a test was done before and after I have subscribed you got me. 🎉❤
Glad you like it, thanks for the sub! Check out some of my newer videos, they're a lot better than these older ones 😉
Is this still your #1 choice for small 3 bathroom residential setting?
Yes, #1 choice for city water!
What is the best shower filter? To soften water and to remove contamiments?
Great question!
The best shower filers we've come accross are:
Aquasana AQ-4100 (bit.ly/3rFRtp6)
AquaBliss SF500 (bit.ly/3rWtUZD)
Keep in mind most shower filters are really only designed to remove chlorine from water.
Some like the Aquasana mentioned above also use a KDF media which reduces other chemicals and some heavy metals.
Although some brands say their shower filters can reduce hard water minerals, the only way to actually "soften" water is with an ion exchange water softener system. No shower filter is truly capable of softening water.
@@waterfilterguru Do they remove Chloramine as well? And what about Vit C--- that doesn't soften water -- as many claim it does?
Thanks Can you talk about how this filter deals with iron in well water. Or how I can filter out the iron. Keep up the great videos.
Hey Chris, thanks for your comment and great question. This system is intended for use with municipally treated water, not well water. For well water with iron, you'd need to look at a water softener (like this one bit.ly/3xUMjJ1) or an oxidation/filtration iron specific filter (like this one bit.ly/3Ch1EWW).
That being said, you'll need to make sure to take into account all the other contaminants that are present as well while identifying proper treatment for your well water. When was the last time you had it tested by a certified lab? Do you know what additional contaminants are present?
@@waterfilterguru Thank you. I’ll check them out.
This looks like a good system, but it is not stand alone whole house as you imply for most water residential systems (including city). Most homes have water hardness way above 5, and this does nothing to deal with that calcium. For the whole house, that is best dealt with by installing a proper sized ion switched system (salt based softener). Perhaps the carbon in this system is adequate as a pre-stage for that. Note, I would place the 5um particulate filter before the filter in your video however, not after as you have shown.
If one wants to drink the water in large quantities, they should filter at the end (under the sink), not the whole house alone, with a multistage filter system. Drink and cook water 95% from one faucet, and keep that facet clean (test regularly). Depending on the testing, that end system is likely to be best served by RO, with a dedicated carbon before and a 5um + second carbon after the pressure tank. If the testing shows only chlorine (used for bacteria at under 1.65 ppm), i would just use a final carbon +1um filter and call it good. People need to stop trying to achieve 100% removal of contaminates, especially without ongoing testing. Find the safe levels and then be well under them (ie 90% less), and test more often if you are worried. Don't replace filters that don't need replacing. Don't filter what doesn't need filtering. test, then replace. Don't drink hot water from your water heater, without further filtration (use filtered cold water only tap).
If you want really clean water for your fish tank or car wash or window washing business, follow the above pre filter + ion switched filter + RO system with a DI filter and pressure boost.
Correct, to treat water hardness the best option is an ion exchange water softener which would be in addition to a filtration system like the CF in this video.
Two separate technologies, targeting different water problems.
The 5-mircon filter is installed post-filtration (as per the manufacturer instructions) to capture any of the media that might escape the tank, so it does not get into the home's plumbing system.
Great to call out the importance of testing! It's a critical first step to take before investing in any water treatment equipment to ensure you are purchasing a system capable of addressing your needs!
What’s the best way to filter fluoride from drinking water?
We explain in this video! ruclips.net/video/HYvyQ0qU-nU/видео.html
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
Thanks. Very informative. Keep up the good work!
Glad it was helpful! Thanks for watching and for your feedback 😀
I'd like to note that chlorination in storage water is pretty much a necessity, to kill bad things, but drinking it is not so good.
Great call out! Residual disinfectant is necessary to keep pathogens from developing in the water distribution system
Beyond drinking it if you shower with it your body absorbs it which basically is the same people don’t realize what ever you put on your skin goes thru your body
Geez, now I want a whole house filter system.
The first step is to test your water so you know exactly what problem contaminants you need to treat!
This seems like it's designed for City Water? What about someone that's on a well
Correct, the CF is intended for use with municipally treated tap water. Well water is an entirely different game! When was the last time you had your well tested? Do you know what contaminants you're dealing with? The Springwell WS bit.ly/3Ch1EWW is a solid choice for iron, manganese, and hydrogen sulfide removal - but again, it all depends on the specific situation.
Awesome video. I was wondering if you would be making a series with regards to other company's whole house water systems. I just bought an APEC Water WH-SOLUTION-MAX15-FG system which looks amazing, but we will see how well it works for us in the long term.
Yes we will. We have two projects currently in the works, testing two other brands!
this seems so much simpler than hiring a company to come out and give me quotes etc. I'm very tempted to buy right this second! 😂
The DIY approach is typically more cost effective than hiring a local company. There are advantages and disadvantages to each, of course
would really like to see a comparison between this system and aquasana's system
Thanks for the comment and suggestion. I'd love to do a project like this, we'll see if we can get it done
Does it remove fluoride?
No it does not. You have a couple options to reduce fluoride:
1) Add an additional fluoride removal cartridge filter downstream of a tank based system (like the one in this video). Something like this geni.us/WJAFPBP
OR
2) Install a different whole house tank based system, specific for fluoride removal like the US Water Systems BodyGuard fluoride specific system geni.us/N8diO6
OR
3) Use a point of use filter to remove the fluoride from your drinking water. I'd recommend a reverse osmosis system like the Cloud RO geni.us/9ClI8J3 or Waterdrop G3 geni.us/rQekgwp or even a water filter pitcher like the Clearly Filtered pitcher geni.us/VsUZHW1
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
Our plumber told us to get a whole house water filter for our new build in Florida, because of the tendency of the Pex lines to leak over time due to the city water chemicals. We make our own water with a Droughtmasters Traveler atmospheric water generator, so we are drinking fluoride free water. Therefore, we just want to buy a filter that doesn't require any type of licensed professional installer.
If you're home is not connected to the municipal system, then there is no risk of the disinfection chemicals or byproducts entering your home's plumbing system. Is your plumbing still connected, even though you generate water with the atmospheric generator?
Most systems can be installed DIY. Just make sure to read the warranty - sometimes it's stipulated that the warranty is voided if the system is not installed by a licensed professional.
@@waterfilterguru thanks for answering so fast! We just use the water machine to produce six liters a day drinking water. Our new home will be connected to city water for showering, laundry, etc. Just want to put a whole house filter to avoid corrosive leaking of the pex lines over time. According to our favorite plumber!
@@claudiahansen4938 Gotcha! Do you know if the water supplier uses chlorine or chloramine to disinfect the water?
Alternatively, you could simply install a system that uses catalytic carbon (like the Springwell CF in this video) which is capable of reducing both of those disinfection chemicals. This will provide the protection for your home's plumbing you are looking for.
@@waterfilterguru thanks! No, I do not yet know, but will ask.
is the media replaceable by the user/homeowners? Any non-salt water softener from Spring Well?
Yes, the media is replaceable by the user! Check out the Futuresoft salt-free conditioner bit.ly/3P0WfIQ
@@waterfilterguru Springwell is not doing good!! I've been using Aquasana like 8 years now...luckily I was looking around for the customer review...Springwell not very well! Thank you for the info!
Mine is made by Maytag...costed 8k a 2 part system for salt and filtration... the only maintenance is add the salt softener other than that the company will take care everything else
Wow! That's a costly one. I hope its working well for you!
@Water Filter Guru yes my skin is not dry when coming out of the shower or washing hands plus a have aquariums... and my town uses a lot of chlorine I hear TX have the 2nd worse water lol
@@YsoS1R1US Yeah the system should also be helping with any disinfection byproducts present due to the chlorination as well. Glad to hear it!
Hi! Do you still recommend this system over other systems? Why would a water test be needed? Is it to determine if you need additional add-ons?
I recommend a data-driven approach to selecting water treatment equipment. Check out this video where I explain the process step by step: ruclips.net/video/JU4sPer1944/видео.html
Water quality varies drastically from place to place, and what might be best for one situation may not be sufficient for another.
@ thank you very much for answering.. just found out about Berkey and I need to do something different.
What's a good filter to put after the water softener?
Hey John, this depends on your water source and the contaminants you are trying to remove. Have you had your water tested? Do you know what contaminants are present?
@@waterfilterguru I have not, I should probably test before and after the softener. Do you have a video on how to get your water tested?
@@johnknightiii1351 No video yet, but I highly recommend Tap Score by Simplelab - hands down the best and the company we use for all our testing bit.ly/3OPs0Vd
As a side note, the softener only targets hard water so won't be reducing additional contaminants. Testing after the softener should be sufficient to find out what you're dealing with.
I read that carbon filters that don't have a backwash system will grow bacteria over time. How does Springwell's system prevent this over the life of the system (10 years)?
Bacteria growth is a potential risk with any POE system due to the fact that these systems remove the residual disinfection chemicals. A post-filtration UV system can be used to inactivate any bacteria that might grow in the system. That said, it's best practice to monitor any POE system for bacteria growth and take appropriate action (replacing media, filters & sanitizing the system) if bacteria are detected.
@@waterfilterguru Thanks. How do you monitor the system for bacteria growth? Send a sample out every year? And, if that is the case, do you have a recommendation on where to send a sample?
@@johnenloe4198 just a simple DIY test that detects the presence of bacteria should be sufficient
subbed. i wish you massive success. great idea and great service to us all!
Much appreciated! Glad you found it helpful
I live near a rocket facility that was testing some sort of nuclear work and had an explosion downward in the ground. They are in the mountain behind our house. Everyone claims the water is safe. Any suggestions on how to test and a filtration system that we could strive for?
For sure! Tap Score by Simplelab is hands down the best lab testing available and the company we use for all our testing bit.ly/3OPs0Vd
We'd really have to take a look at the testing data to be able to provide any sort of recommendations or suggestions to consider
@@waterfilterguru awesome thank you I’ll look into it.
Hey again Tyler! We just announced a giveaway where we'll be giving out 5 Advanced Tap Score tests. It ends on March 31, but if you want to enter you could have a chance to get one for free! waterfilterguru.com/giveaway/
I did not see any discussion on how the springwell CF system handled chloramine - can you comment on that please?
Yes it removes chloramine. Catalytic carbon is one of the best methods for chloramine reduction, and one of the media used in the system
I have hi nitrate levels. What would you suggest? I feel like local companies wanna sell me the Cadillac of water systems which just isn't in the budget. Thanks
Hey thanks for your comment - great question. Are you on well water? What other contaminants are present?
Ion exchange or Reverse Osmosis are typically good options for nitrate reduction, but it also depends on the overall water quality and what else is present.
@waterfilterguru thank you for your time and response. I am on well water. My ph level is slightly elevated but the nitrate level is in need of attention.
Welcome to the Club ! Are you in Texas ? Home of high nitrates & high pH. Hopefully you don't have tropical fish 🐟 🐠 😭
If I got this system, what would I have to add to also remove Flouride?
You have a couple options to reduce fluoride:
1) Add an additional fluoride removal cartridge filter downstream of a tank based system (like the one in this video). Something like this geni.us/WJAFPBP
OR
2) Install a different whole house tank based system, specific for fluoride removal like the US Water Systems BodyGuard fluoride specific system geni.us/N8diO6
OR
3) Use a point of use filter to remove the fluoride from your drinking water. I'd recommend a reverse osmosis system like the Cloud RO geni.us/9ClI8J3 or Waterdrop G3 geni.us/rQekgwp or even a water filter pitcher like the Clearly Filtered pitcher geni.us/VsUZHW1
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
Greetings! Do you know if this system filters out the fluoride? Thanks
It does not. You have a couple options to reduce fluoride:
1) Add an additional fluoride removal cartridge filter downstream of a tank based system (like the one in this video). Something like this geni.us/WJAFPBP
OR
2) Install a different whole house tank based system, specific for fluoride removal like the US Water Systems BodyGuard fluoride specific system geni.us/N8diO6
OR
3) Use a point of use filter to remove the fluoride from your drinking water. I'd recommend a reverse osmosis system like the Cloud RO geni.us/9ClI8J3 or Waterdrop G3 geni.us/rQekgwp or even a water filter pitcher like the Clearly Filtered pitcher geni.us/VsUZHW1
@@waterfilterguru thank you very much for the quick response. I do have a reverse osmosis system but it wastes so much water that my bill skyrocketed. So that's why I'm looking for another system. Filtering out fluoride is the most important thing for me as well as not wasting water like the RO does
@@corvolio You might want to look for a system that uses bone charcoal media then!
We just installed and tested a whole house water filter that completely eliminated fluoride and PFAs. Check out the video here ruclips.net/video/TAE8YAzcar8/видео.html
Hi - Thank you for making this video. Could you share your thoughts on when it is appropriate to get a salt based filtration system vs a salt free system?
Hi there, great question! So you are referring to salt-based ion exchange water softeners and salt-free water conditioners. Neither of these systems are filters, and they are intended to treat water hardness and not remove contaminants.
A water softener or conditioner would be used in conjunction with a water filter (like the one in this video), if you need to treat a hard water issue.
Check out this article to learn all about the differences between the two: waterfilterguru.com/water-softener-vs-water-conditioner/
Seems like a good to great system. I really like the minimal filter changes required but I'm confused/concerned that the sediment filter is inline AFTER the primary filter. Since we're on a well and have a LOT of sediment, I'm afraid this sequence could dramatically shorten the life of the filter media. Thoughts?
First things first, the CF system described in this video is intended for municipally treated water, NOT well water.
For well water, you might want to consider the WS system (depending on what contaminants are present) - check out this video ruclips.net/video/BwrRpfsc0pU/видео.html
Well water treatment is entirely different than city water, oftentimes much more complex and dealing with different water issues.
Have you had your water tested by a certified lab? If you want, please feel free to email your lab test results to info@waterfilterguru.com and we can have someone take a look and provide any insight that might be helpful to you.
Lastly to answer your question about the sediment filter. Because city water typically does not contain sediment (it's removed at the treatment plant) a sediment filter isn't necessary. In this case, the sediment filter is installed after the CF system in order to catch any particles of the media from the tank that might escape, so that they don't end up in the home's plumbing system.
Do you recommend distilling your drinking water and the adding back trace minerals?
That depends on a few factors such as what contaminants are in the water that need to be addressed and your daily water requirements, among other things. Distillation is one of the best methods of purifying water, and remineralizing is always recommended. That said, reverse osmosis would provide similar results, but with much less energy and time input required.
Very informative thus so helpful in trying to decide on various water filterizaion products.
Glad it was helpful! Thanks for watching and for all your comments!
If I were to get the CF4 for instance, I presume that we'd still need some way to keep scaling down, yes? We don't like soft water units due to the slimy feel, so what other inexpensive option would we have?
Correct, this system does not address hard water. The best and only way to completely eliminate hard water is with a water softener, but if the feel of soft water is a deal breaker you could consider a water conditioner that will still work to protect your plumbing and appliances. Check out the Springwell Futuresoft bit.ly/3P0WfIQ
They also have a CF + Futuresoft combined system where you'd probably get a better deal than if you bought each individually: bit.ly/3KOIkFQ
Hi Brian, Wanted to know your thoughts on Springwell 2 in 1 Filter + Salt Softener combo system. Is it as efficient as combining the Whole House Filter and Salt Softener individually? Appreciate your work. Thanks in advance.
I typically lean towards keeping the two systems separate
I’m on well water. 5 hardness. Not bad. No smells but have a lot of tannins. What do you suggest.
Have you had the water tested? If not, I suggest starting there. We use Tap Score for all our water testing and I can't recommend them highly enough. These are their well water tests: bit.ly/3kJcnnp
Without looking at the data, it's really hard to provide any specific suggestion
I've been looking for something like this, thanks!
Glad I could help! Thanks for watching and for your comment
I am shopping for a whole house filtration system for a house I am building in Europe. However, I can't get over the fact that all that nicely filtered water flows via PVC pipes and fittings that leach PFAS chemicals.
The fittings used in most filtration systems are not made from PVC, but other types of NSF certified plastics. NSF certification ensures these materials do not leach chemicals into water.
I'm not aware of any plumbing items that contain or leach PFAs chemicals - here's a full list of products that contain PFAs waterfilterguru.com/list-of-products-with-pfas/
The first question is always... can I use it with a well. That is the quest... everything is for municipal water systems... how about this one?
This system is intended for use with treated city water. There are plenty of well water treatment systems out there! Well water is tricky because it can be so much more complex. Have you had your well water tested by a certified lab? Do you know what water problems are present that need to be addressed?
Thanks for doing the research!
You're welcome, thanks for watching!
Informative videos, thank you!
We are on a 15K gal water catchment system. Which filter would you recommend for filtering our water for drinking?
Thanks for watching!
It depends on what contaminants are present in the catchment system. Have you had the water test by a certified lab yet?
Carico water system is awesome
Haven't heard of it, I'll have to check it out
What system would you recommend for well water? Thansk for your help in advance.
It all depends on what contaminants/ water issues are present that need to be treated. When was the last time you had a lab test done? Do you know what contaminants are present?
This might be ideal for my small lake cabin as I use approx 1000 gal a month.
Hey Jeffrey, thanks for your comment! Is your lake cabin on municipally treated water, or a private well?
@Water Filter Guru its city water, but we have to truck it in currently into a 1000 liter storage tank.
we would like to access lake water as we are waterfront on a 150 acre lake. Would something like this work with lake water as a source? We also have a UV sterilization tube we could install.
@@Leroylundberg24 The system is intended for use with municipally treated water - for treating lake water you might want to consider your own chemical treatment for disinfection, which could then be followed by this system to remove the disinfection chemicals and byproducts. I'd recommend checking with the manufacturer about using the system for this type of application, first, however
Was wondering if anyone knows if this can be connected to a pex plumbed system, and how you would go about doing this? Pex to Pvc adapters maybe?
I'd look into a PEX/ corrugated stainless steel sharkbite connector
Looks good, but what about getting rid of the chlorine and fluoride?
This one does reduce the chlorine. For fluoride you can filter it at the point of use for your drinking water, I'd recommend a reverse osmosis system. But if you want to address fluoride with a whole house filter, you might want to consider this one instead ruclips.net/video/TAE8YAzcar8/видео.html
How does this work in getting rid of micro plastics?
It depends on the particle size of the microplastics present, but the system should be able to reduce down to 5 microns. For even better microplastic reduction, I'd recommend a system that uses a carbon block filter, as opposed to GAC. Check out the new Springwell cartridge based system (bit.ly/3UXPkmR) or the Evo E-1000 (bit.ly/3mzsFQZ)
Hi Great Info. Sold! Im in Erie CO, any recommendation on an Installer for this system?
Hey Sam, I don't have any specific installer recommendations, but you can use Colorado's licensed plumber search tool to find a licensed professional in Erie
apps.colorado.gov/dora/licensing/Lookup/LicenseLookup.aspx
@@waterfilterguru Thank you. Will order through your affiliate link
What is your recommendation for rain water collection filtration? Would this Springwell CF system be up to the task?
I'd recommend first testing the water. Rainwater collection can be tricky, and although you may think it's free of contaminate it's not. You'll definitely want to consider a disinfection system. Then use the lab data to determine what other treatment you might need
is the water helping your skin and hair?
Skin and hair irritation can be caused by a number of different water issues, but a lot of the time it has to do with hardness and/or chlorine. This system removes the chlorine, but we would need a water softener to get rid of the hardness minerals.
Are you having issues with your skin and hair while showering in the water in your home? Have you had the water tested?
Got a 3d printer u can make ur own super cheap or use stuff u can get at lows or whatever in make 1
Right on! We have a full guide on how to build your own POE filtration system, check it out here: waterfilterguru.com/diy-whole-house-water-filter-system/
Just to clarify....The only way to lower the water "pressure" is to install a regulator (pressure reducing valve). A filter that needs to be replaced will lower the amount of "volume" that passes through the pipes, air-raters and shower heads. You can have 200 lbs of pressure.... yet hardly any volume if it's trying to go through a pin-hole.
Thanks for the comment!
So I bought one...did you have any issues with your water pressure dropping?
No we did not have any drop in pressure after installation. As long as the system is sized properly, it should not impact water pressure in most cases. Check out this article, you might find it helpful waterfilterguru.com/does-a-whole-house-water-filter-reduce-water-pressure/