That’s a pretty well done how to video. Although the guide pin with the anti rattle bushings location upper or lower depends on whether a caliper is leading or trailing in relation to the brake disc. They shouldn’t be opposites across one axle. You defo don’t need a high level scantool for epb functions. A basic service function scantool will do it just fine. The Autel maxicheck pro is under 200 and has most of the functions a diy’er will need including epb, dpf, srs, abs, sas, bms, oil reset, it also does most cars out there. Mine was 165 uk.
thank you for showing the manual way to release the EPB. I'm surprised to see the caliper is TRW and not ASIN Honda used for many years. TRW is likely lower cost.
Can you do a video on doing a coolant flush and re fill? Love your channel. Been saving big bucks by doing the maintenance on my honda oddysey 2019😊👍🏻👍🏻
The Honda "philips" screw is actually not a philips. It's a JIS #3 which is different than phillips in that it's designed not to cam out when the torque increases. If you get stuck, get a JIS #3 impacting screwdriver to help get it out. A regular philips screwdriver does not actually match this screw and you are much more likely to strip it, necessitating a drill out.
Yes. Totally optional to put it back once out. It doesn't serve any purpose. Honda uses it to keep the rotors in place as the car travels in the factory line.
Your videos are extremely well done. The video and audio are both clear as are your explanations.
Bravo sir!
Thank you! I appreciate that!
That was great video. I have 2009 odyssey but it awesome to learn new things.
Thank you
Thank you for creating this content!
Thanks for watching!
That’s a pretty well done how to video.
Although the guide pin with the anti rattle bushings location upper or lower depends on whether a caliper is leading or trailing in relation to the brake disc. They shouldn’t be opposites across one axle.
You defo don’t need a high level scantool for epb functions. A basic service function scantool will do it just fine. The Autel maxicheck pro is under 200 and has most of the functions a diy’er will need including epb, dpf, srs, abs, sas, bms, oil reset, it also does most cars out there. Mine was 165 uk.
thank you for showing the manual way to release the EPB. I'm surprised to see the caliper is TRW and not ASIN Honda used for many years. TRW is likely lower cost.
Very informative video and greatly appreciated ...
Thanks for watching!
Thank you, bro. Just earn a sub.
Appreciate you subscribing!
Can you do a video on doing a coolant flush and re fill? Love your channel. Been saving big bucks by doing the maintenance on my honda oddysey 2019😊👍🏻👍🏻
Hi there, I will surely make a video when the service is due. But it will be later as my mileage is still relatively low.
I usually clean the old grease out from the housing of the guide pins and the rubber boots and pack them with fresh grease.
I wonder what brand shock you have on the rear
Thanks for the video. How many miles you had on the odyssey?
It's a 2019, and the brake was done at 57k miles.
Thanks Dial2fast!
The Honda "philips" screw is actually not a philips. It's a JIS #3 which is different than phillips in that it's designed not to cam out when the torque increases. If you get stuck, get a JIS #3 impacting screwdriver to help get it out. A regular philips screwdriver does not actually match this screw and you are much more likely to strip it, necessitating a drill out.
Yes. Totally optional to put it back once out. It doesn't serve any purpose. Honda uses it to keep the rotors in place as the car travels in the factory line.