How to fix your Headphones by replacing 3.5 mm stereo Connector

Поделиться
HTML-код
  • Опубликовано: 14 май 2016
  • How to fix your Headphones by replacing 3.5 mm stereo Connector. How to repair Earphones/ Headphones and replace stereo 3.5 mm connector. Where to buy best 3.5mm stereo Connector.
    Monetize your Clicks and Downloads: publisher.linkvertise.com/ac/...
    • LINKVERTISE One of the...
    You can help me to support my projects:
    On PATREON: / 2013electronicscomputers
    Affiliate links:
    High quality 3.5mm connectors:
    Stereo connector:
    amzn.to/3V1iVNC
    alii.pub/6x97ar
    Stereo connector with Mic:
    amzn.to/3TPJapE
    alii.pub/6x97bj
    Amtech FLux: amzn.to/3SzlNAq
    Amthech flux: ali.pub/3fzb9x
    Rosin Flux: alii.pub/6wt434
    Solder: alii.pub/6wt443
    Soldering Iron: alii.pub/6wt7fo
    Soldering Iron Stand: alii.pub/6vnifd
    Solder Wick: ali.pub/53b163
    Soldering/Repair Mat:
    amzn.to/3q07HIZ
    alii.pub/6g41jp
    Music: Topher Mohr and Alex Elena - Stalling (royalty free music)
  • НаукаНаука

Комментарии • 73

  • @philfrydman2576
    @philfrydman2576 4 года назад +32

    You're the best. Can't hear can't see.

  • @hoagie7859
    @hoagie7859 7 лет назад +14

    i thought my speakers were broken at the beginning when you clipped the audio haha, clever. thank you for the tutorial I recently broke my studio headphones and could NOT afford to a new pair.

  • @3orMoreChars
    @3orMoreChars 3 года назад +2

    Came here to see how to connect stereo connector. Left with an idea for a ring as well. Awesome!

  • @garyandrews746
    @garyandrews746 4 года назад +11

    Ensure that your cabling connectors, earth, red and green wiring to the new 3.5 mm plug are insulated to near the soldering join, if you do not then your audio performance will not function correctly as your wires will be touching inside the gold casing causing intermittent shorts. Remember too tin your wires and avoid cold welds.

  • @armansoylu5229
    @armansoylu5229 7 лет назад

    nice video thanks

  • @meyague
    @meyague 3 года назад

    hi, my headphones come with green and a copper wire coiled around the red one, could that be ground? thanks

  • @unfortunate2565
    @unfortunate2565 5 лет назад +4

    the pins in these Sennheiser jacks are ridiculously small. It was the real pain in the ass, I had to solder this today and when I had screwed the enclousure, I realized that the connection was broken so I had to do this once again.

  • @digvijayyamagekar7139
    @digvijayyamagekar7139 5 лет назад +5

    But where did you soldered microphones wire ?
    To ground, left or right ??

    • @ElectronicsComputers
      @ElectronicsComputers  5 лет назад +4

      That connector has only 3 terminals so there's no contacts for a mic. Here's pinout: ibb.co/yQBRwdR

  • @d.sasikanthreddy8177
    @d.sasikanthreddy8177 5 лет назад

    Plz do video on sennheiser px80 headphone jack repair.

  • @MeAgain192
    @MeAgain192 4 года назад +3

    so the two ground wires connected together to the ground?

  • @sawankaranjkar8704
    @sawankaranjkar8704 3 года назад

    Red cable center point me SOLD ki hai kya

  • @Zer07jk
    @Zer07jk 4 года назад

    Hello, i hope you still reply to FAQ. This 3.5mm Sennheiser male plug, does it fit into smartphone, laptop or tablet female internal connectors? I know that the standard HiFi 3.5mm jack plug DO NOT fit correctly. Please let me know. Thank you

    • @ElectronicsComputers
      @ElectronicsComputers  4 года назад +3

      it fits absolutely perfectly to any smartphone tablet or laptop. There are connectors with 3 and 4 terminals. The last one in case you have a Mic in your headset. All the links in the description below the video.

  • @clarkevander
    @clarkevander 3 года назад +1

    I wanna see it if would work before soldering it. Is that possible? Thanks.

    • @ElectronicsComputers
      @ElectronicsComputers  3 года назад +3

      Just attach those wires to the terminals and hold them tight with your fingers. Then connect it to your device and check if it works. The wires inside may have PVC isolation or a special paint so make sure you cleaned it nicely.

  • @panchoskywalker
    @panchoskywalker Год назад

    I have a green, blue , red and copper cable, I assume copper is land, red is right but what about blue and green? There's mic but it is miday on the cable, not on the headset, so I guess one of them is the mic but why? Head phone only work on 1 side, always the same phone. I've welded the blue and the green on the same point and still there's only 1 phone that is working.

    • @ElectronicsComputers
      @ElectronicsComputers  Год назад

      I'd stick the connector into any jack and turn on some music and then try to attach those wires to different terminals (without soldering) to find out a proper connection scheme.

  • @gladexofficial
    @gladexofficial 7 лет назад +1

    how can we connect a s20 pin earplugs with a 3.5 mm jack..?? s20 earplugs have 6 wires. I need to connect those 6 wires to 3.5 mm jack. How can i do that..??

    • @goingafk0
      @goingafk0 5 лет назад

      Look for TTRS, i think that is the one your are looking for

  • @maxernst37
    @maxernst37 3 года назад +1

    this new connector are a hell for soldering sure its less expensive to make...

  • @nijojomon5642
    @nijojomon5642 4 года назад

    Item not available.pls help

  • @neodonkey
    @neodonkey 3 года назад +3

    quite a bit more tricky than it looks, you need steady hands and good eyesight. I'm gonna need to get a proper magnifying glass and some decent flux as my first attempt was botched.

  • @zonah1732
    @zonah1732 5 лет назад

    My stereo plug has 3 connections but my ear buds have 4 one brown, one red, one green and one green and red. Where do i put these?

    • @ElectronicsComputers
      @ElectronicsComputers  5 лет назад +3

      First, plug your connector somewhere and turn some music on. Next, clean a little that color paint from wires and try to connect any of them to the ground contact and another to the left or right channel. If one wire doesn't work then keep the same wire on ground and try another on left or right channel. So, you have to find two wires for left speaker and two wires for right one and the last wire will be your mic which you are not gonna use.

    • @zonah1732
      @zonah1732 5 лет назад

      2013Electronics&Computers thanks for your help. But i tried everything i could, until i noticed thtat my plug wasnt the problem rather the speaker itself wasn't working.

  • @arielestulin9706
    @arielestulin9706 3 года назад

    where do you buy the Sennheiser connectors?

  • @pubgsubgkhubg3945
    @pubgsubgkhubg3945 4 года назад

    Bro I have Cosmic Byte G3300 headphone . The Jack Got Ripped Off And when I cuted the Braded Cable It has only Two wires One is green And the other Is copper and there's no Red wire. Please help

    • @ElectronicsComputers
      @ElectronicsComputers  4 года назад

      There should be at least three or four wires for speakers. There are two wires only for the mic and USB connectors. Are you sure that you have cut the right connector?

    • @pubgsubgkhubg3945
      @pubgsubgkhubg3945 4 года назад

      @@ElectronicsComputers yes bro

  • @RahulKumar-ep7vq
    @RahulKumar-ep7vq 3 года назад

    Kaha sa kharida jack

  • @william77777
    @william77777 5 лет назад

    I want to ask sir. If 3 ring where is ground and mic? Left, right, ground, and mic. In video the ground channel is mic?

    • @ElectronicsComputers
      @ElectronicsComputers  5 лет назад +1

      ground is the big one. # contacts only for stereo headphones. For mic you need 4 contact plug.
      @t
      @t

    • @william77777
      @william77777 5 лет назад

      @@ElectronicsComputers yea.. i mean 4 contact plug (3 ring), i'm confuse between ground and mic channel.

    • @ElectronicsComputers
      @ElectronicsComputers  5 лет назад

      i.pinimg.com/originals/4b/58/9f/4b589f6f2a795390476033df660f95b0.png

    • @ElectronicsComputers
      @ElectronicsComputers  5 лет назад +1

      jebbush.co/wp-content/uploads/35-mm-jack-wiring-diagram-wiring-3-5-mm-jack-wiring.jpg

    • @william77777
      @william77777 5 лет назад +1

      @@ElectronicsComputers nah that is it, i appreciate your help. Thank you so much.

  • @vaisakhsudhakar6835
    @vaisakhsudhakar6835 3 года назад

    Hii sir .. 🙏can you suggest for me..to usefull pin .of presonus hd7 🎧 stereo headphone....buy. (Quality pin)please..

  • @Frank-DuxVanDamme
    @Frank-DuxVanDamme 3 года назад

    So, that's it? I'm not doing it alone. Have great speakers connected to ps4 controller but jack or end of the cable is broken.
    Really frustrating!

  • @McLovin__
    @McLovin__ 5 лет назад

    My left and right sounds are not separated when playing music.
    During soldering I melted the black plastics between the left and right signals of the plug/jack. Could that be the reason?

    • @ElectronicsComputers
      @ElectronicsComputers  5 лет назад +1

      Probably, try to re solder it and if you have a multimiter check for short between left and right terminals.

    • @McLovin__
      @McLovin__ 5 лет назад

      @@ElectronicsComputers Thank you. By the way, I am using a 4 core cable. I used 2 wires for the ground and 2 for the signal. Is that okay?

    • @ElectronicsComputers
      @ElectronicsComputers  5 лет назад +1

      Yes, absolutely right. Each speaker has its own ground wire. @@McLovin__

  • @petru4335
    @petru4335 3 года назад +1

    This guy only solder the wire without explaining anything hahahaha

  • @tusharsinghal9396
    @tusharsinghal9396 3 года назад

    how did you soldered four wires at three points??????? i need to do the same.... PLEASE HELPPPPPPPPP......

    • @ElectronicsComputers
      @ElectronicsComputers  3 года назад +1

      using soldering iron

    • @tusharsinghal9396
      @tusharsinghal9396 3 года назад

      @@ElectronicsComputers i meant that you must have joined either two wires at one point or you have left joining one wire. Can you please explain as i have broken earphones and a trs jack

  • @kloakovalimonada
    @kloakovalimonada 2 года назад

    Yeah, that's the jack my 2yo destroyed very very easily 😂

  • @prohacker8092
    @prohacker8092 7 лет назад +1

    what is the name of that tube u used

  • @ShowTVMarocofficial
    @ShowTVMarocofficial 4 года назад +1

    Good but we cant use mic any more 😊

  • @valkyrieguy
    @valkyrieguy 5 лет назад +3

    Good video, it shows the secret to soldering is tinning both sides first. But you're crazy for soldering bare handed... get yourself a pana-vise, and some "helping hands" (alligator clips on arms).

    • @strikingtwice
      @strikingtwice 5 лет назад

      Jesus i was thinking the same thing "get some helping hands bro"

  • @gurcharankohli1748
    @gurcharankohli1748 2 года назад

    Left side spiker not work

  • @dhrumitbabariya505
    @dhrumitbabariya505 4 года назад

    Can we use it without soldering

    • @ElectronicsComputers
      @ElectronicsComputers  4 года назад

      NO! I never seen such connectors.

    • @dhrumitbabariya505
      @dhrumitbabariya505 4 года назад +1

      @@ElectronicsComputers that means I want to soldier wire , without soldering I cannot use it ?

  • @databoyinc
    @databoyinc 4 года назад +1

    you never explained which wire goes where

  • @AnaDMTL
    @AnaDMTL 4 года назад

    This guy about to lose a finger by the way he holds that hot soldering iron

    • @ElectronicsComputers
      @ElectronicsComputers  4 года назад

      all my fingers are still in place :)

    • @AnaDMTL
      @AnaDMTL 4 года назад

      @@ElectronicsComputers lol I'm glad dude! Just be careful!!

  • @patkaczmarek7362
    @patkaczmarek7362 3 года назад

    The factory solder jobs should be permanent. Very frustrating.

  • @rizalizal5912
    @rizalizal5912 4 года назад

    Pic 2 bad

  • @Bakchodikayamrahe
    @Bakchodikayamrahe 4 года назад

    ruclips.net/video/x0Ue5X6BsH0/видео.html
    ek bar ye video dekho isse to bhut aasan hai

  • @kingcampbell98
    @kingcampbell98 4 года назад

    It sucks to be deaf I can never tell if my headphones are working

  • @riskromer9773
    @riskromer9773 4 года назад

    people come here expecting to learn which cable goes in which contact, you $*%&* Scharwzenegger