MAROLEX AXEL 2000 FOAMER UNBOX AND REVIEW
HTML-код
- Опубликовано: 16 июл 2024
- If you want to try this product for yourself, check it out Carzilla using the link below:
carzilla.ca/products/marolex-...
Carzilla is easily my favorite place to get detailing supplies. They have a huge selection, fast shipping, awesome customer service, and one of the best rewards systems in my opinion.
You can save yourself 5% on a lot items using discount code: CARDETAILING5
You can also save yourself 10% at diydetail.com using discount code: TCDC10
Links to other products used in this video and commonly shown on the channel:
Adams Wheel and Tire Cleaner
carzilla.ca/products/adams-wh...
IK Foamer
carzilla.ca/products/ik-foam-...
Marolex Sprayer
carzilla.ca/products/marolex-...
All Purpose Cleaner
diydetail.com/collections/dec...
If you need to contact me, the best way is to email me at contactcardetailingchannel@gmail.com
The links above are affiliate links. If you click and purchase anything at all, I will earn a small commission at no extra cost to you. 
Авто/Мото
Discount Codes to save you some money:
Carzilla 5% off: cardetailing5
DIY Detail 10% off: TCDC10
Armour Detail Supply 10% off: TCDC10
Ethos Car Care 10% off: TCDC10
It works great with a compressor. I put a Shrader valve on it and I use a battery-powered air pump with a 9 foot coiled plastic hose attached. I just keep the tire pump running. My little pump can only maintain around 30PSI if I continously spray, but it's fine. I have a bigger 18V Milwaukee pump that I'll try next time. It should be able to maintain the maximum pressure of 5
I think 58 PSI, but I'll set it to 50 and see what happens. I just hold the little pump in my left hand, and use the sprayer with my right hand.
Thank you for this video. I need to change to the white tip. Explains by my foam struggled.
I have both and love them both but the marolex is better built and shoots out longer when fully pumped but thanks for explaining the difference between the tips cuz I never bothered to do the tests and couldn't figure out why sometimes it wasn't shooting out like the guys I've seen online😂😂 now after watching your video I feel dumb but it's working great so thanks 👍🏾
Great review 👍
i think the low intensity foam would be suitable for interior leather, fabric cleaning etc where you just need foam. Great demonstration of the product!!!!!!! cheers
Marolex is definitely on par with IK or in some ways may even be better. The thickness of the plastics used and the durable high quality construction is why these sprayers are some of the very best made in the industry. I rank my top four picks for spray bottles as 1) Kwazar, 2) Marolex, 3) IK, and 4). Pressol, not in any particular order. I like all four of them in different applications. For interior product spray bottles, I love the size and quality of the Pressol bottles and the fact that Matt Moreman has those incredible labels specifically designed for his bottles. I've been using all kinds of Kwazar bottles of various sizes for many years picking them up directly in Germany many years ago. I like the new IK's a lot too since they upgraded them recently and made them more ergonomic. I do think for the hand "pump up" style you show here, Marolex is one of the best. Especially with a Shrader valve mod you speak of. Those bottles should last a very long time with proper routine maintenance. A big thing with ANY sprayer is just keeping it clean. Even the cheaper brands will last a long time with routine cleaning. Just keep that bad boy rinsed out after every use and try not to store any chemicals in the sprayer itself and any of the top brand sprayers should last you quite a long time. Most sprayers fail from not keeping them clean, leaving chemicals inside them, failing to rinse these chemical residue's from the guts of the unit, which of course leads to premature break down of the interior plastic workings of the sprayer head. I've lost so many sprayer heads over the years from simply not cleaning the sprayer heads out when I should have. Literally, I could not even remotely imagine how many over the 40+ years that I have been actively detailing. Marolex has an entire line of high quality, durable construction sprayers for just about every application in vehicle detailing.
Thank you for the real world input Joe! I love this and all my Marolex sprayers so far. I just picked up a bunch of the Ik spray bottles with the updated triggers so I’ll slowly be switching everything over to those. I really like the way the Pressol bottles look on the shelf but for me it came down to convenience of getting the Ik bottles quickly from Carzilla. Your note about keeping every clean is definitely key when it comes to longevity of any sprayer. I would go through those grey tolco sprayers atleast once a month with Meguiars wheel brightener. I appreciate the comment
Marolex pump sprayers really are the best out there. Their run times and build quality seem a lot better than the IK ones.
I am very impressed with the quality. I have no doubt that I’ll have these for years to come. Thanks for watching and commenting Jay
Would definitely like to see a comparison between the two.
I have the ik foam 2 (for which you can buy rebuild kits) and it is perfect for wheels. A chore for the whole car, but still fit for purpose.
Cheers for the demo!
Thank you for watching! I will definitely work on a comparison video
I got the 3l version. I love the overall high quality design. Nothing on it says cheap or flimsy.
I had high hopes for this product as a reason not to go through the troubles of a pressure washer, but it just doesn't look sound at all, just cheap. Anything that is just plastic and you have to pump up the pressure, it's not going to perform well and will deteriorate quickly over time.
Would love to see you test them both. I have the ikfoam pro 2 and think I need to get some new gaskets as when I pump it up, foam is coming out the top.
Both are great products but I’ll definitely be doing a head to head comparison between the two. Sounds like the o rings for sure
I dont know what's wrong w mine. I only used it once. Did a 256:1 plus 1/2 once of apc, and it's giving me a 'rapid fire' spray on all tips. Even water. What do you think it is?? I can't find the instructions damn
Do you think 3:1 dillution for Adam's wheel and tire cleaner is unnecessary for vehicles that are maintenance washed every week? I heard you say 4:1
Hey Chris! I’d say, if you’re cleaning your wheels every two weeks or more frequently , don’t go stronger than a 1:4 dilution. Anything stronger than that will definitely be overkill for sure
Your tire pressure looks kinda low brotha
Yeah the winter wheels on this Acura are corroded pretty bad and are leaking around the bead. I used bead sealer on them for him last year but this one still slowly loses air
Am I the only one who purchased this foam sprayer and can't get foam action like I see in video's? I have tried each nozzle and several different products and dilution radios and still not working as advertised. What a shame.
Maybe defective? Have you tried contacting the manufacturer?
Use snow foam shampoo from a good brand
@@ahmetfidan8028 I have tried several brands of shampoo, nothing works the way it shows. Thank you.
Bruh same, however I get the foam action but I have to constantly keep pumping nonstop :( I didn’t think of a defective unit... too late to return now ..
@@jonathangeorge3404 I did contact manufacturer over 6 months ago; not once but 4 different times and no response.