As much as it's a bummer that the rear wheels aren't as wide as they're supposed to be, it's good to see that LEGO is taking steps forward with actually making smooth tyres this time!
For sure. I didn’t buy the technic McLaren because it didn’t have smooth tyres. I believe Daniel Ricarddo also mentioned that in the reveal . Why it has wet tires
4:05 I believe the Shell pieces are printed because they get partially covered by that piece of the nose cone at 4:20. Lego were probably worried a sticker might cause clearance issues or get damaged by the piece on top
For the 1x1 prints, there's also the fact that they are non-obvious prints, so having all white 1x1s have the print makes the build easier because there's no chance of using the wrong one
Yes you're not allowed to have tobacco branding on items classified as toys. Also, the Mp4 4/4 did run at some GP's without tobacco branding as it was banned in certain countries even back in 1988.
The other reason they include only printed 1x1s for the engine cover bag is that they don't want to let you make the mistake of choosing the unprinted 1x1s for the bit that requires the printed ones, and to only realise after you've buried the printed ones into the assembly itself. This is the same reason why set 76906 (Ferrari 512M) contains 6 of the printed 1x1 plates when only two are visible when built. This is one of those building-experience-trumps-price moments that LEGO is good for.
I'm really surprised they didn't go with the wider rear tires as well. They already have the new suspension A frames, with wide rear tires that would allow them to make a whole range of more modern F1 cars for the Icons line, like one of Schumacher's Ferraris from the early 2000s or one of Hamilton's Mercedes' perhaps.
It’s funny how other companies like CADA can make larger rear slicks and separate from the rims too, there’s should be no reason why LEGO can’t do this properly.
Major problem is not the tire size at the rear but the croocked front nose. I still can't believe how they couldn't recreate a fully straight profile, looks like the front nose is about to fall off, too bad! Also the engine cover under the airbox is definitely too bulky and of course, as you mentioned in the video, those rear tires are too narrow...Anyway just the minifigure is totally worth the set!
I believe that the feature that makes taking the wheels off or putting them on the car "faster" than usual refers to the action of changing tires/wheels on F1 pit stops in real life
@@RacingBrickthe one piece wheel design and the locking stud represents actual F1 tyre changes - machine first removes the large single centre nut, then a combined wheel and tyre is replaced i.e the wheel and tyre aren’t separately added to the car during pit stops
@@MonkeyDawg I know how tire change happens in F1 :) The way the text is phrased in the manual means to me that the new wheel design makes the wheel change faster, but there's really no any difference between this and any other LEGO Technic wheel from this perspective. But that might be my interpretation only.
As an F1 fan and someone with an immense amount of respect for Senna, this was overall a pretty cool set, sure its not perfect, but I think the tyre thing isn't a huge issue to me, and does a pretty good job at commemorating one of, if not Formula 1's best drivers ever
Other than the failed rear wheels still a nice displayable set. Builds a lot bigger than expected given the price piece and the scaling is great with the other cars in the line up. Nice to see functional steering on a smaller model.
I wasn’t a huge fan of this set at first because of the smaller scale, but honestly? I think it’s won me over. The pricing is decent and the build looks really fun! I’m not even an F1 person but I probably will be getting this day 1!
Nice review. Things you’re saying is spot on. Already ordered Marlboro stickers and searching for rear tires. When I have all I’ll build it. Till then my box stays sealed.
I think they covered the one by one studs so all the one by one studs are the same so you don’t don’t mix them up and have to take the whole thing apart
My biggest gripe with this set are first: the buckled nose cone, and secondly the rear wheels. Concerning the Marlboro branding on scale models: usually decals are included, but not always shown, so that the car can be made realistic, without needing to advertise the model with tobacco manufacturers.
I'm way more annoyed that those new suspension parts don't feature a 2l hole, or at least a 2l axle-hole, than I am that they didn't mould 2 different new wheels.
6:16 They are talking about Formula 1 technology, not the LEGO set There was technology implemented to help the car tires be swapped quicker during pit stops.
This is a really good looking set. It is something different in the lineup, as this is truly one of the most iconic formula 1 cars in the history. Ayrton Senna was truly one of the most iconic formula 1 racers of all time. I am still trying to find a good deal here in the U.S. for one, as to me, it is just a bit overpriced (even though the silver pieces aren’t cheap to make, good amount of prints, legendary Ayrton senna mini-figure, and the new pieces). Thanks for another great review!
Besides the rear tires, that printed piece on the nose is what bothers me most. I mean, I totally get why they didn't do the Marlboro branding (and in fact, the car actually raced like this), but where's the iconic chevron shape? They did so well on the rear of the car, but on the nose it's completely absent. Why go trough the effort of making a printed piece if it's printed completely wrong? Still, I have already pre-ordered it, even when that was mostly just to get the Classic Space GWP....
I think they really dropped the ball on this one, the rear wheel size is horrific. Car just doesn't look like the iconic Mp4/4 and more like F3 or something. Shocker.
I already preordered the car knowing the rear wheels are going to be a visual issue for me. I've heavily debated 3d printing a new wheel/tire to make it look more complete even though it won't look as good as Lego.
it´s always the same. LEGO produces sets that I, as a fan of whatever the model is about, am really looking forward to but since I´m a fan I just won´t buy it because of course those details like the skinny tires bother me. It´s so annoying, especially for the price. When it comes to the Marlboro branding however: I get why they can´t do it but come on: MP4 stands for Marlboro Project 4 and the livery is designed to look like a pack of Marlboros.
That's what I was thinking. This way the white would have also covered the sides. I wouldn't even mind getting a sticker instead but they definitely should have reversed the colors
Did your come pink ? Mine came pink. I can't display the set because of it. Matter of fact all the white decals are a light shade of pink. Do they have any QC over at Lego lmao
black half bushings would be nice, or some other alternative for that. and having the suspension not..suspense is an interesting choice. even if it didn’t flex, having them be less parallel (forced by the cross axles) is a bit unfortunate
If I'm luck enough to get this, I'd definitely be looking for a rear wheel upgrade. Also the colour scheme - Have they made the red parts on the nose deliberately different to the real thing to look less like tobacco advertising?
Doesn't the reference in the manual to the speed of removing the tyres refer to real life F1 tyres where the wheels are all integrated, rather than having a tyre that is added to the rim? Setting aside the size of the rear wheels, the actual composition of the one piece tyre is more accurate.
I'm fairly sertain I have heard that Lego only allowes for each theme to add 2 new parts per year (might be diffrent for diffrent themes as they sell more or less set or not) buty it might be the reason that they couldnt make a larger tyre for the rears.
I’d have loved to buy this set but man the rear tires…it just fails to represent the car’s look in a way I want. I’ll get that off-road buggy instead instead because it’s cheaper with more functionality but I definitely liked this set better.
Looks ok from a distance and perhaps they could only make one mold for the new wheels. The printed piece on the nose looks wrong as it should be a V shape.
Really disappointed the tires and wheels are 1 piece, I was looking forward to mixing and matching them with other rims and tires of that size. Dual molded wheels also makes it especially frustrating that the rear tires are too skinny as making wider tires only would've required one more mold, and wider tires would be so useful for everything from go karts to dragsters!
This looked great in the store, but held off from buying it to do some research first. And man I didn't notice the details at first. Would've killed me if I had bought it and noticed the tires and pink sections. Such a shame.
The lack of width of the rear tyres is bad, also I don’t like the fact the shape of the print above the front axle is wrong (I can almost forgive print quality). Still getting it though
Looks like the store you kindly linked doesn't ship to the UK. Shame. I will wait for a brick link mod with better sticker sheet before purchasing I think. How could they also miss the iconic 45 degree integration of the white to red on the nose cone. That is as stand out as the skinny rear tyres in my opinion. Now if only they did red 5 and the Porsche 917
perhaps they should do the Jean Louis Schlesser Williams Judd from Monza, being as that was who Senna tangled with whilst lapping him, meaning McLaren didn't win every race in 1988, of course a gift for Ferrari, especially after the passing of Enzo Ferrari the month before
I think when I build this I'm gonna make or buy some Marlboro stickers to make it more realistic, I was dissappointed but understanding when I saw It at the reveal.
I plan to gift this set to my dad on easter since he is or was a big F1 fan. However the rear tyres bug me a bit since it shall be a proper display set.... I wonder if there are people who will give online tutorials to 3d print own ones or have alternative pieces that already exist that I could buy. I wanna gift my dad something but uhh dont want to disappoint him with smth inaccurate.
I would replace the tyres with the set of senna gtr grooved tyres, at least they are different in width. It can represent senna who is good in rainy track
I got too see all of the new sets in person (and the bmw too, but not the audi and mustang) They are really cool in person, I would defiantly buy, especially since they reduced the price of the double speed champions, and for the new bmw, it's 30 dollars instead of 40.
I give it a good 8 for the try, because all in all it is a good set, but it should cost 30 euros less. For that 80+ euro cost, you should have made way better set what we got.
This is not a Senna mini figure because the helmet is missing a dark blue stripe below the green stripe. The white print on the new red nose part is also pain in the eyes because the angle of the print is totally wrong.
Am I the only one who isn't bothered by the tire situation? I've seen the MP4/4 in person before, and the difference in width between the front and rear tires is not what I took away from the experience. I'm just glad they've made slicks for the car. How much further off the mark would it look if they reused an existing tire element with tread at this scale?
I was thinking the same thing, 8440 and 8445 have much wider 49x28mm diameter tires (which is the usual Icons car size - 49x14 and 49x20, haven't seen exact numbers on these new parts yet). But their wheels were only white/gray/silver, no black from lego. At 1:13 scale, the front should be 49x23mm and the rear 49x35mm so using 20 and 28 wide would at least move in the right direction.
You mean doubling the rear wheels like this? - ruclips.net/video/9SEB9UjmZcc/видео.html I think that's way too wide and looks funny, because you cannot put them in the proper position due to the rims.
It is not bad set. Little bit pricy. Minifigure is great. But after building RoscoPC model of that car is better in every aspect. Sure it is another scale (1:8) and has technic insides.
Check out the local prices and availability in the LEGO Online Shop - racingbrick.com/product/10330-2/
hello
As much as it's a bummer that the rear wheels aren't as wide as they're supposed to be, it's good to see that LEGO is taking steps forward with actually making smooth tyres this time!
For sure. I didn’t buy the technic McLaren because it didn’t have smooth tyres. I believe Daniel Ricarddo also mentioned that in the reveal . Why it has wet tires
4:05 I believe the Shell pieces are printed because they get partially covered by that piece of the nose cone at 4:20. Lego were probably worried a sticker might cause clearance issues or get damaged by the piece on top
For the 1x1 prints, there's also the fact that they are non-obvious prints, so having all white 1x1s have the print makes the build easier because there's no chance of using the wrong one
Size of rear wheels is a joke.
Agree.
Absolutely agreed. The rear wheels for even the smaller sets are small.
Yeah makes it look like a Formula Ford
Not only the wheels bother me the white on red prints look soooooo of collor i dont like it
Its a yoke, a yoke!! (Fernando Alonso reference)
Yes you're not allowed to have tobacco branding on items classified as toys. Also, the Mp4 4/4 did run at some GP's without tobacco branding as it was banned in certain countries even back in 1988.
Yes, but make a rounded chevron like design..
The other reason they include only printed 1x1s for the engine cover bag is that they don't want to let you make the mistake of choosing the unprinted 1x1s for the bit that requires the printed ones, and to only realise after you've buried the printed ones into the assembly itself. This is the same reason why set 76906 (Ferrari 512M) contains 6 of the printed 1x1 plates when only two are visible when built. This is one of those building-experience-trumps-price moments that LEGO is good for.
Make a fucking ! In the beginning of the manual. Cobi has like 8 different Typen of slopes and stuff is fine
Actually rear wheels are exactly 50% wider. 25x10x13 front, 26x15x13 rear
Where did you get those figures? Google says Fr: 11.75”, R: 16.25” Thats pretty much 40%
I'm really surprised they didn't go with the wider rear tires as well. They already have the new suspension A frames, with wide rear tires that would allow them to make a whole range of more modern F1 cars for the Icons line, like one of Schumacher's Ferraris from the early 2000s or one of Hamilton's Mercedes' perhaps.
An ‘Icon’ set that is actually iconic! Shame about the wheels, didn’t notice it at the reveal
It’s funny how other companies like CADA can make larger rear slicks and separate from the rims too, there’s should be no reason why LEGO can’t do this properly.
There are more constraints that come with scale than physical capability
still doesn't explain why cada can do it , if it can be done it can be done simple
yes exactly why a company like cada can achieve it yet a huge company like lego were to lazy to do it
The only reason is money. We idiot customers buy anything, so why put a few more cents in product development?!
I wonder if Balázs will pimp up this set with 3D printed rear wheels. I bet he will.
I hope he shares the stl file too 🤞
Or gets another set and double stack the rears.
he should it would be amazing
@@idonjohnson6999 that might be too wide though
@@matemayer4850 true. But better than this skinny wheel.
Major problem is not the tire size at the rear but the croocked front nose. I still can't believe how they couldn't recreate a fully straight profile, looks like the front nose is about to fall off, too bad! Also the engine cover under the airbox is definitely too bulky and of course, as you mentioned in the video, those rear tires are too narrow...Anyway just the minifigure is totally worth the set!
I believe that the feature that makes taking the wheels off or putting them on the car "faster" than usual refers to the action of changing tires/wheels on F1 pit stops in real life
I get that one, although I don't see how this new wheel design makes the wheel change any faster.
@@RacingBrickthe one piece wheel design and the locking stud represents actual F1 tyre changes - machine first removes the large single centre nut, then a combined wheel and tyre is replaced i.e the wheel and tyre aren’t separately added to the car during pit stops
@@MonkeyDawg I know how tire change happens in F1 :) The way the text is phrased in the manual means to me that the new wheel design makes the wheel change faster, but there's really no any difference between this and any other LEGO Technic wheel from this perspective. But that might be my interpretation only.
@@RacingBrickI interpret it that you don't have to remove the rubber because you actually can't 😅
@@mikosoft hehe, well Speed Champions and City did that already, so it's not the invention on the year either :)
Im a huge f1 and Senna fan, but Lego didnt do this car justice, the rear, the front, its all just wrong. Even his helmet. Definitely disappointing.
Agree, but im going to buy the set anyways lol
Exactly why Lego do this this, they know people buy it anyway so they don't care....
It would've been nice to see the blue stripe on the helmet
@@j1m909 They should have hired some F1 experts when they designed this set
@@matemayer4850 just someone with a pair of eyes would of done
As an F1 fan and someone with an immense amount of respect for Senna, this was overall a pretty cool set, sure its not perfect, but I think the tyre thing isn't a huge issue to me, and does a pretty good job at commemorating one of, if not Formula 1's best drivers ever
Other than the failed rear wheels still a nice displayable set. Builds a lot bigger than expected given the price piece and the scaling is great with the other cars in the line up. Nice to see functional steering on a smaller model.
Would the tires work better on an RC drift car MOC than LEGO’s normal, more rubbery tires?
Hopefully, someone makes a if it doesn't exist already a minifig sized version for obvious reasons.
lego is releasing one
Many, many MOC’s out there. Just search for Lego MP4.
i wish they could just spend a minute or two delivering a wider wheel design
I wasn’t a huge fan of this set at first because of the smaller scale, but honestly? I think it’s won me over. The pricing is decent and the build looks really fun! I’m not even an F1 person but I probably will be getting this day 1!
Such an exciting set but the issues with the rear wheels and the nose make it a sad but very hard skip
Nice review. Things you’re saying is spot on. Already ordered Marlboro stickers and searching for rear tires. When I have all I’ll build it. Till then my box stays sealed.
I think they covered the one by one studs so all the one by one studs are the same so you don’t don’t mix them up and have to take the whole thing apart
My biggest gripe with this set are first: the buckled nose cone, and secondly the rear wheels.
Concerning the Marlboro branding on scale models: usually decals are included, but not always shown, so that the car can be made realistic, without needing to advertise the model with tobacco manufacturers.
I'm way more annoyed that those new suspension parts don't feature a 2l hole, or at least a 2l axle-hole, than I am that they didn't mould 2 different new wheels.
I have already pre-ordered it. I can't wait for your solution to fix those rear tytes
Is it me or does the engine cover look like a great start for a space shuttle?
6:16 They are talking about Formula 1 technology, not the LEGO set
There was technology implemented to help the car tires be swapped quicker during pit stops.
This is a really good looking set. It is something different in the lineup, as this is truly one of the most iconic formula 1 cars in the history. Ayrton Senna was truly one of the most iconic formula 1 racers of all time. I am still trying to find a good deal here in the U.S. for one, as to me, it is just a bit overpriced (even though the silver pieces aren’t cheap to make, good amount of prints, legendary Ayrton senna mini-figure, and the new pieces). Thanks for another great review!
Besides the rear tires, that printed piece on the nose is what bothers me most. I mean, I totally get why they didn't do the Marlboro branding (and in fact, the car actually raced like this), but where's the iconic chevron shape? They did so well on the rear of the car, but on the nose it's completely absent. Why go trough the effort of making a printed piece if it's printed completely wrong?
Still, I have already pre-ordered it, even when that was mostly just to get the Classic Space GWP....
I think they really dropped the ball on this one, the rear wheel size is horrific. Car just doesn't look like the iconic Mp4/4 and more like F3 or something. Shocker.
I already preordered the car knowing the rear wheels are going to be a visual issue for me. I've heavily debated 3d printing a new wheel/tire to make it look more complete even though it won't look as good as Lego.
You are right it could be better. For those wanting a more realistic mp4/4, Tamiya have it in a model kit if you are up for the challenge.
it´s always the same. LEGO produces sets that I, as a fan of whatever the model is about, am really looking forward to but since I´m a fan I just won´t buy it because of course those details like the skinny tires bother me. It´s so annoying, especially for the price.
When it comes to the Marlboro branding however: I get why they can´t do it but come on: MP4 stands for Marlboro Project 4 and the livery is designed to look like a pack of Marlboros.
Yeah, I can't look past those rear wheels. I might even display it without the wheels because the wishbones look good now
I think the white print on the red on the front is almost worse than the skinny tires for me. Couldn't they have done a red print on a white piece?
That's what I was thinking. This way the white would have also covered the sides. I wouldn't even mind getting a sticker instead but they definitely should have reversed the colors
Did your come pink ? Mine came pink. I can't display the set because of it. Matter of fact all the white decals are a light shade of pink. Do they have any QC over at Lego lmao
Where do you get the other decals? Mine didn’t come with any
This was the first thing that I noticed when they announced it at first. Why are the rears so skinny ? Like I know they are wide, always were
black half bushings would be nice, or some other alternative for that. and having the suspension not..suspense is an interesting choice. even if it didn’t flex, having them be less parallel (forced by the cross axles) is a bit unfortunate
If I'm luck enough to get this, I'd definitely be looking for a rear wheel upgrade.
Also the colour scheme - Have they made the red parts on the nose deliberately different to the real thing to look less like tobacco advertising?
@ 6:17 Is a little pun/reference to a pitstop
It’s your saving. A wider wheel on the read would mean two molds and less quantity per tire! Pure and simple, less cost more margin!
Not a fan of the shiny tires. Might have to take some fine sandpaper / scotchbrite to the treads to make them look race-worn.
I agree with you, the rear is an insult.
My question is where do you keep your speed champion...???
Doesn't the reference in the manual to the speed of removing the tyres refer to real life F1 tyres where the wheels are all integrated, rather than having a tyre that is added to the rim? Setting aside the size of the rear wheels, the actual composition of the one piece tyre is more accurate.
The suspensions are really interesting!
Once I get the set delivered, im probably gonna get my friend to 3D print some bigger rear wheels to make it look more realistic
I'm fairly sertain I have heard that Lego only allowes for each theme to add 2 new parts per year (might be diffrent for diffrent themes as they sell more or less set or not) buty it might be the reason that they couldnt make a larger tyre for the rears.
Thay have way more slots than that. There is a limit, that is true, but they could have planned this properly.
My biggest gripe is the lack of the blue stripe on the helmet
I’d have loved to buy this set but man the rear tires…it just fails to represent the car’s look in a way I want.
I’ll get that off-road buggy instead instead because it’s cheaper with more functionality but I definitely liked this set better.
Can you 3d print the back wheels in there "real size", to see how it would look?
Why no blue line on senna’s helmet?
the speed they are mentioning in the set is related to a modern f1 race pitstop, where they remove and replace all tires in under 3 seconds!
Such a shame about the rear wheels. So much so, that it puts me off getting this set. Id never get over it.
Looks ok from a distance and perhaps they could only make one mold for the new wheels. The printed piece on the nose looks wrong as it should be a V shape.
Hmmmm mabye some drag car wheel on the back would look a lil better?
The front nose printing also doesn't represent the real car, the white/red part should be more going into a triangel then the rounding it does now..
Those back wheels are huge
Does the mini fig enter in the seat
Like the set but real sad about rear wheels. Is it possible to buy bigger wheels?
Not from LEGO, maybe there'll be some 3d printed options
Really disappointed the tires and wheels are 1 piece, I was looking forward to mixing and matching them with other rims and tires of that size. Dual molded wheels also makes it especially frustrating that the rear tires are too skinny as making wider tires only would've required one more mold, and wider tires would be so useful for everything from go karts to dragsters!
5:10 i believe the printed side should be exposed as its some form of intake
As much as I hate the rear tires, I’m definitely picking up this set
This looked great in the store, but held off from buying it to do some research first. And man I didn't notice the details at first. Would've killed me if I had bought it and noticed the tires and pink sections. Such a shame.
0:49 I open my boxes like that too! 😂 but with a ruler 📏… I prefer the taped ones though, I don’t like destroying the boxes
Does your fixing of the rear tire by any chance include the use of liquid resin? :)
Not this time, I'll try to quickly 3d print (with a filament printer) a mockup to see how it is supposed to look like
The lack of width of the rear tyres is bad, also I don’t like the fact the shape of the print above the front axle is wrong (I can almost forgive print quality). Still getting it though
Looks like the store you kindly linked doesn't ship to the UK. Shame. I will wait for a brick link mod with better sticker sheet before purchasing I think. How could they also miss the iconic 45 degree integration of the white to red on the nose cone. That is as stand out as the skinny rear tyres in my opinion. Now if only they did red 5 and the Porsche 917
perhaps they should do the Jean Louis Schlesser Williams Judd from Monza, being as that was who Senna tangled with whilst lapping him, meaning McLaren didn't win every race in 1988, of course a gift for Ferrari, especially after the passing of Enzo Ferrari the month before
Super fast to remove and reattach is a nod to the pit crew that perform tyre changes during a pit stop.
Odd that some of the new sets have moved to paper bags and others haven't... indication of how long some have been in design/production?
Depends on the factory, the transitioning schedule is different
I think when I build this I'm gonna make or buy some Marlboro stickers to make it more realistic, I was dissappointed but understanding when I saw It at the reveal.
I plan to gift this set to my dad on easter since he is or was a big F1 fan. However the rear tyres bug me a bit since it shall be a proper display set.... I wonder if there are people who will give online tutorials to 3d print own ones or have alternative pieces that already exist that I could buy.
I wanna gift my dad something but uhh dont want to disappoint him with smth inaccurate.
This is a fantastic model, what a great tribute to the man Ayrton Senna … Can’t wait to hear the fix for the rear tires
looks cool but the rear tires look weird
Why didn't they print red on white for the front? In what setting is it ever better to print white on red?
Mine came literally pink. I can't even display the set cause of it. What idiot designed this set ?
I would replace the tyres with the set of senna gtr grooved tyres, at least they are different in width. It can represent senna who is good in rainy track
Those tires are almost exactly as wide as these ones, and they are actually smaller
I might get this if I find the period correct decals. And the right helmet.
I got too see all of the new sets in person (and the bmw too, but not the audi and mustang) They are really cool in person, I would defiantly buy, especially since they reduced the price of the double speed champions, and for the new bmw, it's 30 dollars instead of 40.
I give it a good 8 for the try, because all in all it is a good set, but it should cost 30 euros less. For that 80+ euro cost,
you should have made way better set what we got.
7:16 its pretty obvious that theyre just cutting corners. Lego cuts corners wherever they possibly can nowadays
I kow but where are the malboro decals
They still can't match colour of the stickers to parts.
Lego would never do it, but it's just not the same without the Marlboro decals.
This can be easily remedied with a few stickers from the aftermarket, I'm sure they'll be available soon
@@RacingBrickhopefully I need the Marlboro branding on mine 😂
Rear wheels are unforgivable, the white print a close second. And why not make the Marlboro stickers an 18+ Lego shop purchase?
This is not a Senna mini figure because the helmet is missing a dark blue stripe below the green stripe.
The white print on the new red nose part is also pain in the eyes because the angle of the print is totally wrong.
Am I the only one who isn't bothered by the tire situation? I've seen the MP4/4 in person before, and the difference in width between the front and rear tires is not what I took away from the experience. I'm just glad they've made slicks for the car. How much further off the mark would it look if they reused an existing tire element with tread at this scale?
How about the 8440 wheels for the rear? Still it is a great piece of history!
I was thinking the same thing, 8440 and 8445 have much wider 49x28mm diameter tires (which is the usual Icons car size - 49x14 and 49x20, haven't seen exact numbers on these new parts yet). But their wheels were only white/gray/silver, no black from lego.
At 1:13 scale, the front should be 49x23mm and the rear 49x35mm so using 20 and 28 wide would at least move in the right direction.
Looking back, the years ago creator series ferrari f-40 just done so much right in the first time, they should get that designer to do this...
Would have been all over this, but those rear wheels and tyres make it a hard-pass for me until there's a better option.
I found out how to make the wheels bigger purchase 2 more and by more Axel's and it looks pretty good it is the right size as well
You mean doubling the rear wheels like this? - ruclips.net/video/9SEB9UjmZcc/видео.html
I think that's way too wide and looks funny, because you cannot put them in the proper position due to the rims.
It is not bad set. Little bit pricy. Minifigure is great. But after building RoscoPC model of that car is better in every aspect. Sure it is another scale (1:8) and has technic insides.
Are you gonna review the speed champions? I’m assuming you’re still under embargo?
I don't mind the tyre size that much, it still looks good
I would have bought this for sure if they got the rear tyres right.
This is a MAJOR oversight by Lego.
do you get anything special for pre ordering this set? ordered it a few days ago but just wondering if there are any real benefits to the pre ordering
Is this part of the creator expert/Icons car lineup with sets such as the porche 911 and the Landrover defender.?
No, it’s a much smaller scale than those.
I'm really disappointed about the Senna only version of the car. Why not include 11 and 12 stickers to allow Prost version??? Also Marlboro stickers?
I'm surprised the display plague is a sticker and not printed. Would buyers be more willing to pay $100, if all the stickers are printed?