FT86SpeedFactory - GCS Fourth Brake Light Install
HTML-код
- Опубликовано: 25 июл 2024
- Find out More: www.ft86speedfactory.com/gcs-s...
------
Add some visibility & functionality to the rear of your FRS/BRZ by installing a GCS Smoke 4th Brake/Reverse Light available on our website!
------
Snapchat - Ft86speed
Twitter - / 86speedfactory
Instagram - / ft86speedfactory
Facebook - / ft86speedfactory 
Авто/Мото
“Just tap these wires into these”
*Doesnt show shit*
And you’re done!
They have a newer video that is in my opinion much better.
Smh me too lmao
Those new Valente tail lights look sick! Ive bought almost every single part for my build from you guys! I thought I had finished when I had achieved my goal of 400+Hp but now after looking at your website, I can get some more people with a few new parts. Thanks for the great customer service!
AZBRZ520 hey, I want to boost my car as well, you mind telling me what parts you used to achieve the 400hp
@@VQmarc money
I just got the iJDMtoy kit for like $40 and it works and looks amazing!
Cool, quick and easy install, I like it.
You guys uploaded this a couple weeks after I installed mine. Had to figure out how to do it on my own, with some help from a friend.
I know this is almost exactly TWO years after you guys posted this video, but hopefully someone has some intel on this. Installed the Valenti smoked 4th brake light. Everything went smooth, and the light performs as advertised. Today I'm leaning down by the trunk to install an emblem overlay, and I notice a very light hum/buzz coming from what sounds like the 4th brake light. Anyone else ever hear of this, or deal with this? Thoughts?
Is it legal to delete the stock reflector, I wanna just get rid of it and fill in the hole with more plastic and make the plastic bit by the exhaust real clean
i did mine worked perfectly do exactly what he says but dont use the extra wite instead take outh the blue one from the middle because stock has only 2 pins this one has 3 and you connect the middle blue one to the tailights green
My light came with 1 plug and a red cable, where do i plug the red cable into?
Just curious if this fits a 2020 GT86?
After installing and running the wires like the video instructed.. everything went smooth. I got mine from 86 website, so colors are different. Didn't have to detach the blue from the stock connection under the plastic piece.. just snipped it and wrapped it with electrical tape..then pulled through the slit he showed near the rubber nipple. Blue doesn't even connect to anything so no threat to snip and leave. For the wiring part, I actually had to open up the coatings on the Valenti harness, expose the wires and wrap the red to red and blue to blue around each other... then solder and tape it back up. But when I turned everything on.. the freaking lights were flip flopped.. So my running V light was the break light, and the triangle break light was my running light.. so instead of taking it apart, I went back under the car where the wires plug into the Velinti directly, and switched the wires, blue to red and red to blue... worked like a charm. Green is back up light, blue is BREAK, and red is RUNNING light. Everyone out there, either my car was wired wrong to begin with, or every one of these videos I've seen is inaccurate lol. DONT USE THE TAPS... they cut your wire and don't make a solid connection. Especially if you wire right into your stock harness, they almost cut clean through it, totally optional to solder, still makes a solid connection without doing that when exposing and wrapping around. I ended up stripping the wires into my Valenti break lights and wrapping around those... and it works like a charm. (most people say to stock harness)... but those wires are way too small, and it all connects to the same place. Let me know if you have any questions if anyone ever reads this... took me about 8 hours to figure all of this out on my own. lol #noob
Thanks for all the info. I should be receiving my light soon so this will be helpful. I've heard that there are a lot of inconsistencies about the color of wires they use at the factory, so that's probably the issue. I'll use the wires you recommend and see how it goes.
what about for the reverse camera?
I have the same fourth brake light but whenever I press on the brake, it doesn’t work for the 4th light
How come nobody is asking if this has different settings for the light output? Like does it have different light settings?
what does the extra wire and plug get plugged into? there's only 3 plugs on the light bar what does the 4th (extra) go to?
Travis Tagz have you found out yet? trying to do this now and stuck with the same problem
Anyone ever found out where that extra wire went into?
It’s for the JDM, the US version you’ll need to splice into the other blue wire. Article here: blog.fteightysix.com/valenti-style-reverse-bar-installation/
Show me how to put the black wire with the stock black wire.
Nice.
Hey guys, I want to put this on my 2013 Toyota gt86, I’m guessing it would fit all just the same wouldn’t it? The 2013 brz is listed as compatible on the website but not the Toyota version but I thought the leads were the same
Yes it will fit, the wiring may be just a bit different.
ever have problems with the valenti's? like certain LEDs going out or condensation
+Gonzalo Guajardo ive had mine more than a year and never had a single issue. Worth it for sure.
wwshehan is jt
Can u guys do a tutorial on installing the Perrin pulleys for Automatic transmission?
+PRINZ
There is an install video on my YT channel for the crank pulley!
Are those the black edition valentis?
Yes
sill need to know why there are 4 connectors and 3 connections on the light, which one do i plug in?
Email us at Sales@FT86SpeedFactory.com
FT86SpeedFactory I have the same question, can you guys help me out?
Joel Rowlenson did you ever figure this out ? I have the same problem
I just installed mine today and got everything to work great. The only thing I can't figure out is how the heck do you put the Plastic Rivets back on? I might be asking a very dumb question but I just can not figure out how to push those black small plastic rivets back on? Please help if you can? I really appreciate it and I am really sorry for asking the most dumbest question. Maybe I am dong something wrong?
Are you talking about the pop clips on the sides of the light? They should just go back in as long as they are liked up. Just make sure the center locking piece is not pushed in flush before you reinstall them.
UHHHHHH FOCUS CAMERA
If you are in the US, IGNORE THIS VIDEO. You WILL waste your time. The 4th brake light comes with 2 wire harnesses: 1 plug made up of a blue and black and the other with 3 plugs, a brown/black, blue/black, and green/black. This video will have you wasting your time splicing the blue from the single shorter harness into the green power wire of the car. THIS IS INCORRECT AS THIS ENTIRE EXTRA WIRE DOES NOT GET USED. Throw the short blue/black wire aside as it will NOT be used. You have to CUT the blue wire from the reverse light harness and tap that into the green power wire.
What do you like better the BRZ or the WRX?
That's what i have! :P
Where does the other side of the blue wire go to?
Did you find out?
Stupid question that y’all prob know... Does the Rocket Bunny V3 kit work on a 2017/18 Toyota 86???
Thomas >>>
What exhaust is that?
+IraceTV www.ft86speedfactory.com/ft-86-speedfactory-v1-exhaust.html#.VvKwL-IrJhE
+FT86SpeedFactory ... thanks, i could have sworn from the looks of it that the exhaust had greater than 4'' tips. it looks larger there then in the sales link
Just the angle of the photos.
This is too complicated for a little light bruh
This is hardly complicated, git gud.
Where is Thomas? 😡
Fidel M this video is two years old....
This is Thomas before all the aftermarket upgrades.
2nd!!!!
No lift..Aw man
why does every company suggest using scotch locks. literally the worst wire tapping technique you could ever use.
+avenged8fold1
Very true! Solder or die!
not everyone has a soldering iron, not everyone knows someone who has one
Berenger Christy a soldering iron is like $10 at radioshack... just don't buy drugs this week and buy one, trolololol.
Berenger Christy AND, if the dealerships sees those shitty wire taps, they will instantly void your entire warranty. the custom shop i worked at, fired people for not doing the job correctly.
PowerSports I thought radioshack = d.n.e? If its $10 I can pick one up, I did some soldering back in the day to fix some wiring on my rc truck. It was a good truck
Ngl this is a terrible tutorial. I’m sorry