NEW WOOD MIZER LX150 SAWMILL FOUNDATION
HTML-код
- Опубликовано: 4 июл 2024
- We have ordered the Wood-Mizer LX150. We have taken extra measures on the New Sawmill Foundation. This is the most important part of any building project. We have designed the pillars to have a larger base than the top portion, double wired steel inside the footer and 10 inch anchor bolts to make sure we have plenty of grip for the pressure treated 6x6 rails the mill will attach to. Follow along here for behind the scenes information and on our main channel for the building of the homestead listed below.
We greatly appreciate your time and interest. Please help support the channel by subscribing and sharing content that appeals to you and commenting on the videos. We use the material to improve and bring you better viewing enjoyment.
MAIN CHANNEL: / @smokymountainoutpost
SAWMILL BLADES
JOE MAINE - 229 563 1172
Instagram: / smokymountainoutpost
Facebook: / smokymountainoutpost
Website: www.Smokymountainoutpost.com
Email: Smokymountainoutpost@gmail.com
STORE: smoky-mountain-outpost.creato...
Main Camera: amzn.to/2WvDOm9
Main Lens: amzn.to/2wsTJar
Microphone: amzn.to/2QxGZ9g
Second Camera: amzn.to/2IZxUSy
Drone: amzn.to/398oWNt
Canon Creator Kit: amzn.to/33ybIs4
20" Axe: amzn.to/2xaRXe0
13" Hatchet: amzn.to/2U7hYDX
KIT PAGES:
Camera Gear: kit.co/smokymountainoutpost/c...
Tools: kit.co/smokymountainoutpost/o... 
Развлечения
Everything is going well
Can't wait to see the new sawmill
Me too. Let’s hope it fits, lol
Overdoing things is not a bad thing Richard. From the look of everything you have done so far, you made some very wise decisions. Thank you for your in depth explanations.
Thanks. We just don’t want the sawmill moving while we’re trying to cut. That would be a disaster.
I love both your channels Richard, great way for me to learn as well as be entertained!
lol, well better check the internet before taking my word. I just do things my way
Good job Richard keep up the good work .
Thanks. We are trying to have everything done when the mill arrives
I love all the videos
Thanks. Have a great weekend
Love it
Thanks Richard
Thanks for sharing with us Richard. We enjoy what your doing on both channels. If you all find it easier to combine them or keep them separate is up to you. We just enjoy your videos and the fun you share with us. Fred.
No worries. Second channel is mainly chat which I’m not good at but willing to do if people like it.
Right on the money great job
Thanks. I think it’s going to work great
Wow love these ❤
Glad you like them!
Always great information. Foundations are important, especially if there are any vibrations or side load impacts. Years ago, we set up a 48x60 inch jaw crusher. The man they sent out to set it up left all kinds of voids in the blocking. I complained about his blocking. I told him that it would not take the movement. The first load through the jaw plant started to move. We spent the next two days stabilizing the plant. We crushed 160k yards through that plant, and it never moved. The total weight of the plant was 105k pounds.
Foundations are the most important step in a building
Bin so gespannt auf das neue Sägewerk 👋😊🙋♂️
You and us both. It’s like a birthday or Christmas waiting, lol
Hard work big pay off
Yes sir. We are getting excited waiting for it
G'day from Down Under. Looking forward to seeing the new Wood Mizer in action. With all your detailed and thorough preparations, it should go without a hitch.😊
Thank you for the kind words. I certainly hope I have it right. It will be nice to get it set up and running.
Have a great week
This is awesome, I think you should also try and make a budget friendly one with your customs add ons, because youre hella smart
Sounded like a shotgun off in the distance 😮
No. Some folks that live in the hollow across the road always wasting money on ammo. Some days 1000 shots or more
Anther great video Richard; one comment, however, those of us who watch your channels would be well served to "do as you say and do". I have learned more from watching you build your homestead than from the others channels to which I am subscribed.
Oh My. I don’t know what to say. Thanks
We called it a 3 pounder as well...but somewhere down the road I started saying " bring me the man hammer"....and it stuck...at least with the buddies I worked with
lol, nick names stick with us better I think
I’m with Jennifer, I’ve always called it a “small sledge hammer”. I looked up the definition of sledge hammer and all references stated it had a long handle. I guess that is why they call it 3 pound hammer.
lol, every job requires its own tool and that small sledge works good for many things
Your foundation should hold up well. The Lx150 is going to look nice with the wood in the background. When is the ETA for the upgrade, or is it a surprise to the Channel?
It’s a surprise to us!! They can’t seem to tell us since they are building it.
On our East Coast of Australia it’s called a lump hammer but on the west coast it’s called a gimping
Isn’t it great that nicknames stay with us
It's a baby sledge hammer. ;)
That’s right, lol. It’s a good tool
Richard when you add to much water in concrete, when the concrete dries it is a weaker concrete.
As a general rule, every additional inch of slump decreases strength by approximately 500 psi. So for example, if you ordered 5-inch slump concrete and received 7½ inches, a mix designed to be 4000 psi would end up being 2500 psi. This represents a serious loss in strength, especially if you were placing exterior concrete in a freeze/thaw climate where the standard requirement is 4000 psi for proper durability.
People talk about dry pouring concrete, that to weakens concrete as it takes agitation to activate the chemical reaction.
In road for highways and interstates building thy try for a slump of 1 because the concrete is compacted, as the concrete is hauled in dump-trucks and delivered to the concrete layer, which also vibrates it and compact it.
But ready mix bag concrete like you bought it is not recommended to exceed the amount of water specified on the bag, as the mix generally is formulated for a slump of 3 or 4.
In the concrete you poured in the very soupy state, all of the larger aggregate in the mixture, before it set up, settled to the bottom 25% of the pour height, with all of the lighter particles in the concrete floating to the top. So in you foundation for your sawmill you have what us called stratification of the concrete.
Over time the surface of you foundations being mostly Portland will chip off exposing the aggregate. You see this happening on sidewalks, driveways and concrete wall, where the concrete was poured to wet.
When I was 19 I worked in concrete construction of grain silos and we poured the concrete at a slump of 2 to 3, and w was shown example of slump of 8 or 9, and when the test cylinder was sawed in half all the aggregate was in the bottom 1/3, and the pressure test the concrete was no at 5000 Pis, and was around 500 psi or less.
To much Water in concrete mixture weaken the concrete , and I cringed when I say you pouring that 12 slump concrete.
On you next pour take and make a 8”x8”x12” corn and fill it with concrete and let it dry, then cut it lengthwise and you will see the rock are in the bottom , sand Portland will make up the top2/3 and the concrete will be very brittle.
Thanks for the info. Mostly I use quikrete which is mostly poured dry. If I use mortar then I have to mix. Never had any issue with either method. They have set up good just like I left them and anchor bolts are tight pulling 6x6 to the footer. It was a “Hot” job in this extreme heat, but done and has turned out really nice.
@@OutpostReview Quikrete only recommends dry pour on fence post only, on concrete slabs it is not recommended as the concrete is very weak and fails.
Several of the Ready Mix companies all have the sam warning on there site about Dry pouring concrete.
Dry pouring is often considered easier than wet pouring because it eliminates the step of mixing the concrete first. However, dry pouring has several disadvantages, including a lower quality final product, a higher risk of cracking or uneven surfaces, and a higher potential for costly repairs or replacements.
I actually watched a video on RUclips where a building Engineer did a test showing the strength of Dry pour concrete against wet pour mixed according to the directions on the bag.
The dry pour shattered at less than 600 psi and the wet pour shattered at 4500 psi.
He used 4000 psi concrete.
It works fine for fence post, but not driveways or sidewalks.
Pouring concrete in Oklahoma in 100+ temps, I has to use dry ice chips in concrete to keep it from setting up to fast to all work time.