We spend quite a bit of time on a great device!!!
HTML-код
- Опубликовано: 23 апр 2022
- Good afternoon friends!!!
My name is Alexander, on my channel you will see many interesting solutions for creating a tool with your own hands at home!
Subscribe to the channel, it will be interesting!
INSTAGRAM / master___sh
aleksandr.k...
How do you like this device?
it is a very well made and cared device and also very useful.
the idea of connecting it directly to the body of the milling machine using the thread already present is excellent, even if it exposes you to the risk of ruining the original thread with such a long lever arm, if you use it often you might think about creating another threaded bar from use alternatively: a short one with this coupling and a long one with an angled fork connection that goes under the original screw and gives it greater flexibility while saving the original thread.
P.S.
the blackening in the beech cuts with the saw indicates a slightly worn blade: a problem that I also had on mine.
I changed blade and put on an orange CMT and the world changed for the better (I'm not sponsored)
Ciao
@@zolatanaffa87 Thank you so much for your continued support!🙂🖐
I suggest a small piece of dowel (?3mm) between the long threaded rod and the bolt that screws down on to it, to protect the thread
@@zolatanaffa87 gpl
I don’t understand what it will be used for.
The device is good but I am surprised you still have all your fingers, cutting the small block of wood on a table saw with no guard and holding it in place with your fingers, it only needed the piece of wood to grab and your fingers would be in the blade.
Thanks friend 🙂
We enjoy seeing your work and we are happy to see and support our channel ...💙
Thank you so much friend 🙂🖐
Bonjour Alexander, très intéressante cette idée 👏👏❤❤.....Merci pour cette vidéo....Amitiés de France
Merci mon ami, cordialement de la Russie!🙂
Great little jig, but I sense that safety isn’t a priority in this shop.
There is such a thing, thank you
Как всегда ,выше пяти баллов.Респект.
Muy Buen Video.
*¡¡¡ BIEN TRABAJO !!!*
Gracias amigo, saludos desde Rusia!
Смотрю на работу вашу и такое ощущение складывается, что десять пальцев это роскошь. Спасибо за вашу работу, берегите руки.
Спасибо, за добрые слова 😇
Hola estimado, un exelente accesorio para hacer círculos. Saludos cordiales desde Chile 🇨🇱.
Gracias amigo, saludos desde Rusia!🇷🇺🖐
Muito prático. Parabéns 👏 . Guarujá. S.p. Brasil
Boa tarde! Muito obrigado! Você e seus entes queridos tudo de melhor!🤝🇷🇺
Simple but effective, nice one.
Thanks friend 😇
Молодчик!!! Интересная штуковина получилась!!! Жму руку!!! Ну и ЖИРНЫЙ ЛАЙК!!!;))
Спасибо дружище 🤝👍🖐😇
Muy bueno el video amigo👋👋!! Te mando un saludo desde comodoro rivadavia, (chubut) ARGENTINA.
Gracias amigo, saludos desde Rusia!🖐🇷🇺😇
AND ANOTHER EXCELLENT ANCILLARY TOOL FOR THE WORKSHOP TOP MARKS
Thank you so much for your continued support!🖐🙂
Ótimo trabalho!
😇👍
I like your work 👍
Thanks friend 🙂
Ellerinize emeklerinize yüreğinize sağlık Süper 💯
Teşekkürler dostum,Rusya'dan saygılarımla!👍
PARABÉNS. Ótimo trabalho
🙂👍
C'est👍 j♥️ beaucoup votre travail.
🙂🤝
Hi master sh good idea good job well done friend
Hello, thanks friend 🙂
Tebrikler oldukça başarılı ve işlevsel
Çok teşekkür ederim,size de iyi günler!
Interesting tool, making it is useful, but suggest you protect your fingers more. Table saws eat them in a second.
Thank you, I am very pleased to hear this!I 'll be careful !With best wishes from Siberia🖐
Very cool!
Thank you friend 👍
Great creative device
Thanks friend 🙂
Спасибо Вам за Ваши подсказки
Взаимно 🖐
Bayım süpersiniz var olun.
🙂🖐
Muito bom! 👍
Bom amigo, Muito obrigado!Parece que está tudo bem!🖐
Удобно! Я бы только винт взял с баоашком, зажимной
Здравствуйте, спасибо 🙂
Just what the world needs.
Good afternoon! Thank you very much! All the best to you and your loved ones!🙂👍
Cool device!
Thank you 🙂👍
Простенько и со вкусом!!!
Благодарю 👍
Bom.
Ok
Very good.
... de Brasília DF
Boa tarde! Muito obrigado!Abraços da Rússia🇷🇺🖐
Top!!
Thank you 👍
Зачётная вещь!!! Нужная , исполнение ювелирное !!!Мастеру жирный лайк!!
Анатолий, огромное спасибо 🙂
Fantastica idea
🙂👍
Very simplyfullllll
Hi, thanks friend 🖐
Simple et efficace 👍👨🦽💨
Merci mon ami, cordialement de la Russie!
Простая и нужная приспособа!
Александр, полагаю, что нелишним было бы добавить к ней простенькую шкалу, чтобы более-менее точно иметь представление о диаметре или радиусе выполняемого фрезерования. Может, на самой шпильке маркером перманентным нанести сантиметровые метки? Просто пока ничего другого в голову не пришло :)
Здравствуйте, огромное спасибо! Я думал об этом, но чёт в голову не пришло как на резьбе это сделать! 🙂
@@MA-SH наверное, проще всего сошлифовать резьбу с одной стороны (т.к. она не используется все равно) и на образовавшейся плоскости нанести разметку любым доступным способом - хоть ленту бумажную с делениями приклеить
@@user-zn3rq7nq4w ну вообще да, неплохой вариант, спасибо 🙂🖐
Отличное приспособление 👍👍👍
Спасибо дружище 🤝
@@MA-SH 🤝🤝🤝🤝
even simpler than what I did for my milling machine (bigger, Bosch type) I can mount the milling machine on the shoe with the pin, with a 6 mm cutter I make holes with a minimum diameter of 15-16 mm, or I can put the shoe to the opposite side of the original bars and I arrive around 30 cm in radius.
Hello, great buddy! In my case, it was still possible to reduce the radius, but this is enough for me!🖐
@@MA-SH yes yes I totally agree with you in fact when I created my idea I looked for the minimum possible limits only for "academic" curiosity, with the forstner cutters you can make holes from 10 to 60mm in diameter, so my solution is useless, moreover at the time I did not yet have a cutter like yours (even if at 220V and not battery-powered), much more manageable in these cases.
@@zolatanaffa87 Great, have a nice day!🖐
👍🏼👍🏼 MM77 Approved
Hi friend! Thanks 🙂
hello , you mounted a Metabo Akku on the Makita Device ? How did you manage that ? Would be a nice video......Wie montiert man den Akku von Metabo auf eine Makita Oberfräse - echt super.....ohne Kabel !!Klasse
Hi friend!1 072,03 руб. 28%OFF | Конвертер адаптера MBB18MTL, используйте Metabo 18 в, преобразователь литий-ионных батарей для литиевой машины Makita LXT, замена BL1830 BL1815
a.aliexpress.com/_A6CWO9
No reply how you managed it ?
from Brazil.
🖐🇷🇺
It’s abnormally professional and elaborate for common people to create a device like this one, and rather expensive to own necessary equipment to “manufacture” it.
But what for with this “tool”, eventually? Some concentric curved lines ploughed on a piece of wood. And what for with this “product”?
Just for killing time?
Well, if it's difficult for you)) Then keep lying on the couch, because there is nothing easier than lying down and drawing lines on the ceiling!
Привет круто красава, а что за пропитка или масло используешь? Не подскажешь
Здравствуйте, спасибо! Масло с воском для столешницы, бренд не подскажу!
@@MA-SH спс
Пжл👍
Personally? No way. Way over complicated design for a simple jig that could be made out of a 1/4" piece of plywood. But if it works for you and you like it, then that's all that matters. It's very cool to see.
Hello, thank you very much! I think you will get cool and made of plywood! Best wishes from Siberia!
Крутой распылитель пыли :) Лайк-подписка :)
🙂спасибо
Many woods produce very toxic dusts, especially the resin bonded ones like MDF and Masonite, so try to use your vacuum together with a very good respirator mask. Don't let your health go away for working faster, you will regret it sooner or latter!
Not sure why you'd rip a block of wood on a sled and not just install the fence so you can do it safely. Cool project tho
Thank you friend 🙂👍
私もなんぼうか作り使用していますが、良い材料があれば挑戦してみます。それとそのルーターは何処の製品ですか、出口に柔らかい天井からフリーで吸引出来るホースを取り付ければ完成ですね、
下午好! 非常感谢! 来自西伯利亚的问候🤩👍
Еще можно сделать, в качестве иногда нужной вещи, перпендикулярное отверстие ниже уровня шпильки, прямо под зажимным винтом.
Может пригодиться при вырезании отверстия большого диаметра. Предотвратит сильный прогиб в конце реза (конечно, при том, что туда будет вставлен пруток длиннее диаметра вырезаемого отверстия).
Здравствуйте, спасибо 👍
Legal 👍👍👍
🙂🖐
Интересная вещица! Для резьбы по дереву - самое оно
Привет, огромное спасибо!
Could have made 3 jigs in the time it took you to make that . Cool but unnecessary. Attach a piece 8”x36”x1/4 to a router base . Make center line on piece . Drill hole to desired radius . Swing router . Done
Hi, thanks a lot! Best wishes from Siberia!👍
it's great
Good afternoon! Thanks buddy! Sincerely from Siberia!
So unsafe but the idea is great
Thank you buddy 👍
@@MA-SH be safe brother 😊
Привет!Лайк! Удобная приспособа получилась!
Здравствуйте, спасибо 🙂🖐
Hey, wo hast du die Beleuchtung der Oberfräse her?? Suche so eine. Mit freundlichen Grüßen
Akku-Kantenfräser Makita DRT50Z👍
Отличное устройство получилось👍👍👍
Спасибо дружище 🙂
I like your work 👍 and your channel 💗
So bitte nicht nachmachen. Außer, ihr möchtet gerne die 112 anrufen lassen. Denn selbst anrufen werdet ihr nicht mehr können, wenn ihr eure Finger an der Kreissäge abgesägt habt. Ansonsten ist der Kreisfräser ja ganz nett. Aber ob ein Kantenfräser für kreisfräsen wirklich so gut ist auf Dauer wage ich stark zu bezweifeln.
Vielen Dank für Ihre Sorge,ich werde vorsichtig sein! und in diesem Fall funktioniert alles perfekt
Bridge doctor? Looks just like one, to fix warped guitars.
👍
Muy bien
😇🖐
cool
Danke, Kumpel,mit freundlichen Grüßen aus Russland!
👏👏👏👏👍👍👍👍
🙂🤝
резьба в дереве? оригинально......
Смотря в каком? Умничка...
Watch those fingers buddy.. so close.
Thank you 🖐
@@MA-SH I mentioned it because I used to play that near miss game on my table saw, that is, until that day the saw took my middle finger tip off. I now know why they call it an "accident" since after years of woodworking that "I" could lose a body part to an "accident. That only happens to that "other" guy. Be safe. Use push sticks. It's a pain sometimes to pause to pick one up but one day it just might save something important to you.
👏👏👏👏🙏
Thanks 🖐
1:31 - кровь закипает, как в фильме ужасов от нехороших мыслей...🤔
Хичкок сценарий писал))
👍👍👍👍👍👍👍👍👍👍
Thanks friend 🙂
Удлинить можно за счёт длинного черенка хоть до 2 ,3 метров 🙃
👍
👌🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Thanks 🙂
Класс, 👍
Благодарю 👍
Без токарного станка угадать размер под резьбу это надо уметь.
На глазок 👀
А где ТЕХНИКА БЕЗОПАСНОСТИ?
На втором канале 😇👍
Очень круто!!!! 👍
Огромное спасибо 😇
You won’t have your fingers or have very long. Poor safety
OK , thanks
Pourquoi une tige filetée ?
Une barre ronde suffit.
Bonjour, le filetage aide à ne pas glisser, bien fixé dans le trou de butée!🙂🖐
削りカスを何とかできないのですか、良いアイデアーですね。
こんにちは! ありがとうございました! シベリアからのご挨拶🙂
Fingers too close to the blade.
Do you think it seems normal to me🖐
@@MA-SH please take care.
Your fingers are WAY too close to that blade
👉✋🤚
Só não entendi a necessidade do varão roscado. É desperdiçar material.
Olá, a rosca ajuda a não escorregar, bem fixado no buraco do batente!
Супер вещь!
Благодарю 😇
винт-барашек надо вместо болта. Не надо ключ искать, оперативно меняешь длину...
Спасибо, так тоже не напряжно 🙂🖐
Не знаешь как называется то, что ты сгамзил? Подсказываю: это ЦИРКУЛЬ. Отфрезеруй себе в памяти, маэстро...
Конечно Серёжечка!
@@MA-SH Спасибо!
@@servil55 на здоровье 👍
Why not just use a rod instead of the all thread rod?
The threaded rod is better and more securely fixed !
Дружище супер!!!!
Спасибо Сергей 🤝
циркуль он и в африке циркуль. ничего интересного.. даже слишком мудрено. у систем перелива раковин есть подвижные гайки с блокатором- вполне подходят (если совсем лень)
Спасибо
Хорошо получилось
Спасибо Анатолий 🙂
Pourquoi une tige filetée si le filetage ne sert à rien ?
pourquoi est inutile, il ne permet pas de glisser, une tige plate ne donnerait pas un tel effet
Уступ на нижней площадке специально под свой фрезер делали? Его наличие обязательно?
Здравствуйте, да! Я думаю нет , только чтобы уменьшить радиус, если изменить саму площадку радиус можно ещё уменьшить!
отправьте ДОКТОРУ на проверку
Сам сходи, тебе нужнее 🥴
@@MA-SH пошли вместе
Прям гений
Благодарю 😇
OK LITTLE BETTER IS NO HOLE IN CIRCLE YOU CUT AND CRAZY GLUE IN THE WOOD SCREW BOLTS IN TAKE THEM OUT PUT CRAZY GLUE IN LET DRY MUCH STRONGER THREADS
Hello, thank you so much!
А почему шпилька с резьбой ???
А почему нет?)) с резьбой фиксация гораздо лучше, резьба упирается в стенку отверстия!
inutil mas legal
justo
I downvote clickbait videos
🥴👍
Я так палец себе рубанул
Жаль 😥
@@MA-SH ну рискованно согласись, я даже не понял как факена🖕 подробил😄 доли секунды епть. Для таких целей лучше палочкой толкать. А то насмотрятся потом будут мамкам рассказывать что у тебя подглядели.
@@MA-SH я похожую для плазмореза сделал.
@@largovinch7540 👍
@@largovinch7540 нужно постоянно быть на чеку) но без травм не бывает!
I will not return to your channel. You display a remarkable lack of understanding of safety for using a table saw. I have known professional cabinet makers of long-standing who have lost fingers and even a whole hand because of not using the safety devices recommended. Before going much further, your should review the many channels that show excellent safety as well as skill. Then, copy their techniques. You need to display the proper safety to your viewers so they will copy your safety measures - and reduce the number of people who have devastating table saw accidents. Please model good safety as well as good techniques.
Hello, I will listen to your advice! I will try to be more careful and work slowly! All the best to you!🖐
Видео как НЕ нужно работать с оборудованием.
🥴👍
Как всегда ,выше пяти баллов.Респект.
Как всегда ,выше пяти баллов.Респект.
Николай, огромное спасибо 🙂