Now I've gone through all of our grounds sanded them to metal sanded the wire ring to metal, they work fine when the headlamps are off but turn them on and the signal does not blink...very agrivating
Somehow, somewhere you are getting 12v shoreted to the marker/blinker. This is proven by the fact that with headlamps off, they work fine. Jeep wiring is sometimes a nightmare to work on. Check headlamp switch in dash to make sure there is not a short in switch. It could be a faulty headlamp switch as the markers and blinkers are all on same circuit under dash... sorry I can't help more.
VERY helpful to this new YJ owner!
Thanks! Enjoy your Jeep life!
Yeah Jim, I have the same issue. Blinkers work until you put on the head lights? Emergency flashers ok though.
Yep...very common problem...not too hard to fix 99% chance it's the ground.
Now I've gone through all of our grounds sanded them to metal sanded the wire ring to metal, they work fine when the headlamps are off but turn them on and the signal does not blink...very agrivating
Somehow, somewhere you are getting 12v shoreted to the marker/blinker. This is proven by the fact that with headlamps off, they work fine. Jeep wiring is sometimes a nightmare to work on. Check headlamp switch in dash to make sure there is not a short in switch. It could be a faulty headlamp switch as the markers and blinkers are all on same circuit under dash... sorry I can't help more.
Really helpful. Thank you.
Great Job !!! 💯👍
It would help if you said as you went along "this is a 10mm" and so on. Thank you for the videos
I was doing that earlier, and I will try to either say that, or put a graphic on the screen listing sizes. Good input! Thanks!