Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site) Check "Car Parts for Less" - tidd.ly/2LNEwIn (use discount codes on site) Genuine Mercedes service book - amzn.to/3g7sNhD W205 C Class rear brake pads - ebay.us/G78PYq EOBD Scanner - amzn.to/2YBMA2L Budget EOBD scanner eBay - ebay.us/IHpAfK Advanced EOBD scanner eBay -ebay.us/odL6V7
Hi there quick question What to do if you remove the pads and calipers for the breaks before you go to dash and activate fitting position? Can you help with that
Just one tip for anyone else who struggled to get this to work, you have to be on the page on the Trip menu that shows mileage and not one of the other views such as Digital Speed, Eco settings, etc. I spent an hour cursing my car as I couldn't access the menu until I managed to discover how to do it!
Hi there quick question What to do if you remove the pads and calipers for the breaks before you go to dash and activate fitting position? Can you help with that
Hi DIYaly, how do you change the unit of speed on the top left corner? I'm in the a km/h region, I try to change the main speed unit to mph but it still shows mph on the top left corner.
Thanks for the video. I've got the older system it seems, just the top phone button, but either way, this is useful to know, I'll be changing my rears this weekend as they're pretty much done and I know the dealer will charge earth to do it. Parts are surprisingly reasonable from dealer though, but labour, no thanks. Haha.
Thanks for the video. I did get to the Brake pad replacement message but after pressing ok and ok again it failed to move to the fitting position, just keep getting a message, Conditions not fulfilled-retry with ok. Would appreciate some ideas.
Thanks for the comment, it doesn't say this in the handbook and often catches people out! the only condition required is that the handbrake is OFF before setting pad replacement.. hopefully this will help you 👍
Hello do you only have to put the car into service mode to do the rear as I just need to change the front pads will I need to put the car into service mode for that as I'm sure service mode only retracts the rear hand brake piston
@@benjaminy2405 no just standard but I would advise you to get the special brake caliper piston pusher as a standard one will not fit in there or you the Old brake pads and a screwdriver to force it open that's what I had to do in the end and it worked fine always open the reservoir cap
I’ve changed my brake pads. But now my handbrake doesn’t seem to work. Trying to go back to changing them again and this is coming up. “Conditions not fulfilled” Any ideas?
I replaced the back brake pads 7 months ago but I do not think the garage reset the pads. Would it be okay to do the brake service reset or just leave it?
This procedure is only to set the pistons back into place. The garage must have set them back or it would have had the brake warning flashing since they were replaced. The brake pad wear warning is detected through the pads sensors which can’t be reset , if the warning light is on and the pads have been replaced u may have a faulty or damaged sensor. Thanks
@@diydaly I do not have any warning lights. The garage probably did reset the brake service then. I was not aware of this feature until watching your video. Thanks.
Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site)
Check "Car Parts for Less" - tidd.ly/2LNEwIn (use discount codes on site)
Genuine Mercedes service book - amzn.to/3g7sNhD
W205 C Class rear brake pads - ebay.us/G78PYq
EOBD Scanner - amzn.to/2YBMA2L
Budget EOBD scanner eBay - ebay.us/IHpAfK
Advanced EOBD scanner eBay -ebay.us/odL6V7
Hi there quick question
What to do if you remove the pads and calipers for the breaks before you go to dash and activate fitting position?
Can you help with that
Just one tip for anyone else who struggled to get this to work, you have to be on the page on the Trip menu that shows mileage and not one of the other views such as Digital Speed, Eco settings, etc. I spent an hour cursing my car as I couldn't access the menu until I managed to discover how to do it!
👍👍
Thank YOU mate . I changed my rear brake pads after I watched your video. A big like from me!
Glad it helped. thank for the comment , much appreciated 👌👍
Thanks for sharing it so easily and fast
👍👍
"Key Stage 1" felt like I was back in Primary school 🏫 😆
haha 👍
Very helpful video for a DIY great job explaining
Glad you liked it
🎉nice well explained and short
Glad it was helpful! thanks for the comment
Hi there quick question
What to do if you remove the pads and calipers for the breaks before you go to dash and activate fitting position?
Can you help with that
Not sure as I’ve never done that tbh , try the same procedure if say
Thank you very much is very nice video
Most welcome, thanks for the comment 👍
Very good video thanks
👍👍
Thank you great video
Glad you enjoyed it 👍
Hi DIYaly, how do you change the unit of speed on the top left corner? I'm in the a km/h region, I try to change the main speed unit to mph but it still shows mph on the top left corner.
Should this be done, if change front brake pads?
No only for rear
I also wanna know too
Thanks for the video. I've got the older system it seems, just the top phone button, but either way, this is useful to know, I'll be changing my rears this weekend as they're pretty much done and I know the dealer will charge earth to do it. Parts are surprisingly reasonable from dealer though, but labour, no thanks. Haha.
Thanks for the comment , much appreciated .. 👌 yeah tbf we often use the dealer for parts as they can be really reasonable on price for OE parts! 👍
It helped ❤😊
THanks!
No problem!
Thanks for the video. I did get to the Brake pad replacement message but after pressing ok and ok again it failed to move to the fitting position, just keep getting a message, Conditions not fulfilled-retry with ok. Would appreciate some ideas.
Thanks for the comment, it doesn't say this in the handbook and often catches people out! the only condition required is that the handbrake is OFF before setting pad replacement.. hopefully this will help you 👍
@@diydaly Thanks for your response. Much appreciated
👌👍
Thx buddy
No problem
Hello do you only have to put the car into service mode to do the rear as I just need to change the front pads will I need to put the car into service mode for that as I'm sure service mode only retracts the rear hand brake piston
Yeah the only reason for service mode is to retract the rear piston.. you’ll be ok just doing the fronts without 👍👌
Do we need to do anything to retract the front brake piston when replacing front brake pad/rotor?
@@benjaminy2405 no just standard but I would advise you to get the special brake caliper piston pusher as a standard one will not fit in there or you the Old brake pads and a screwdriver to force it open that's what I had to do in the end and it worked fine always open the reservoir cap
I’ve changed my brake pads. But now my handbrake doesn’t seem to work. Trying to go back to changing them again and this is coming up.
“Conditions not fulfilled”
Any ideas?
Did u get this fixed somehow?
The brake service mode does not pop up when I do this. Do you know what the problem may be?
Hi georgio, has yours got the electronic handbrake ?
For me , hold down phone and ok THEN turn key to one position. 2019 ML
👍
I replaced the back brake pads 7 months ago but I do not think the garage reset the pads. Would it be okay to do the brake service reset or just leave it?
This procedure is only to set the pistons back into place. The garage must have set them back or it would have had the brake warning flashing since they were replaced. The brake pad wear warning is detected through the pads sensors which can’t be reset , if the warning light is on and the pads have been replaced u may have a faulty or damaged sensor. Thanks
It would be possible for you to attempt the procedure though, it certainly wouldn’t harm anything
@@diydaly I do not have any warning lights. The garage probably did reset the brake service then. I was not aware of this feature until watching your video. Thanks.
No probs , thanks 👌
pog, thank you boss
You're welcome 👍👍
I don't know mine not working it's the model c220 d, 2016
Some models may differ slightly
@@diydaly ok i understood thank you
Big Ups
Thanks 👌👍