Hello Sir, thanks for your hard work. please when is the second version of this project going to be available? I have a project similar to this but it uses Bluetooth and IMU. I really need your help. Thank you
Is there a sensor which monitors the posture without attaching to the body...only from webcam or a sensor that is attached to the monitor that senses the posture....plz let me know
@@ElectroniClinic This was the message.., I have some doubts regarding your video titled:Flex sensor or Bend sensor based Human Posture monitoring “Arduino biomedical project”. Before this video you had posted a video on Flex sensor where you explained in detail what is a flex sensor and how you connect it on the breadboard and stuff. Although in the human posture video you have not shown the breadboard and also you have put additional component like a radiofrequency transmitter of whose connections you have not specifies. Also for the buzzer is it ok if I use the 9V battery as I cant find the battery mentioned by you.
I have chose this as my project, coupd u help me out By giving the detailed information regarding connections As i new to arduino Will be waiying for ur reply
@@ElectroniClinic but sir I have seen one other video too U have mentioned those pins But u didn't explain how to connect buzzer and capicitors clearly I just want it a bit more clear sir.... Could you help me out Or can u give me any reference?.
@@dharanisenthilkumar3904 yes, we did it in our first semester, but better opt some thing else, the flex sensor doesn't work properly, and as a result, Arduino values used to elevate , and by making few changes in the code , we some how managed to get the output, and tbh , we've tried to manipulate our instuctor with mock outputs, so better done opt it at the beginning it self, once if u begin this and get stuck in between, even u would also have to manage ur mentor by showing soke fake results
great job 👌
Good..... 😍😍👍
That's great!
Hello Sir, thanks for your hard work. please when is the second version of this project going to be available? I have a project similar to this but it uses Bluetooth and IMU. I really need your help. Thank you
I really enjoyed the video, but could you please kindly advise what exact RF transmitter (and) green circuit board you’re using?
433MHz tx and rx
i have problem back its good to me
Is there a sensor which monitors the posture without attaching to the body...only from webcam or a sensor that is attached to the monitor that senses the posture....plz let me know
Can u plz make wireless. I am waiting fro ur vid.
Hy can you please tell me why you have used radiofrequency transmitter module?
this is used to send the data wirelessly to the receiver circuit.
@@ElectroniClinic Hy I have some doubts in this project that I have send you through email could you please reply me..
@@ElectroniClinic This was the message.., I have some doubts regarding your video titled:Flex sensor or Bend sensor based Human Posture monitoring “Arduino biomedical project”. Before this video you had posted a video on Flex sensor where you explained in detail what is a flex sensor and how you connect it on the breadboard and stuff. Although in the human posture video you have not shown the breadboard and also you have put additional component like a radiofrequency transmitter of whose connections you have not specifies. Also for the buzzer is it ok if I use the 9V battery as I cant find the battery mentioned by you.
Can we do the project without using the radio frequency transmitter..And also can we use the 9v battery
ya you can do it without using the rf modules and yes you can use 9volts
Sir.. buzzer is ringing continuously sir what to do sir..
I have chose this as my project, coupd u help me out
By giving the detailed information regarding connections
As i new to arduino
Will be waiying for ur reply
Everything is available on my website
@@ElectroniClinic but sir
I have seen one other video too
U have mentioned those pins
But u didn't explain how to connect buzzer and capicitors clearly
I just want it a bit more clear sir.... Could you help me out
Or can u give me any reference?.
@@vivekreddy7315 hello have you done the project is it works
@@dharanisenthilkumar3904 yes, we did it in our first semester, but better opt some thing else, the flex sensor doesn't work properly, and as a result, Arduino values used to elevate , and by making few changes in the code , we some how managed to get the output, and tbh , we've tried to manipulate our instuctor with mock outputs, so better done opt it at the beginning it self, once if u begin this and get stuck in between, even u would also have to manage ur mentor by showing soke fake results
Hello sir can you Please send me code of this plz
Hi sir ..is there any possible to use aurdino nanu for this project
of course you can use.
How much it cost?
tea