How to Fix Center Console Armrest Clip 8th Gen Honda Civic (2006-2011)

Поделиться
HTML-код
  • Опубликовано: 26 авг 2024
  • This shows how to remove and reinstall the center console clip on a 2006-2011 Honda Civic.
    You will need:
    -Torx T15 screwdriver
    -New clip: part #83451SNA-A01ZA
    -8th generation Honda Civic with a broken clip

Комментарии • 246

  • @Jus1MoreGame
    @Jus1MoreGame 5 лет назад +80

    Just wanna say thank you. Honda wanted to charge me almost 300 dollars to replace that center console piece. I appreciate you.

  • @hughriley7145
    @hughriley7145 4 года назад +41

    Sir, I thank you. That was the most helpful, factual, accurate and down-to-earth video I have seen in a long time. Just completely on point. I ordered the part, followed your instructions and saved myself tons of money and lots of aggravation. You are awesome.

  • @aakudev
    @aakudev 4 года назад +21

    Came here after seeing the video with loud music, was expecting a good music here too but got dejected.......lol thanks for the quick helpful video.

  • @larisachka1
    @larisachka1 4 года назад +5

    Finally a car guy who kept his instructions under 5 minutes!

  • @johnhendrie7609
    @johnhendrie7609 6 лет назад +4

    What a great find. The latch on my 2007 Civic broke and the dealer quoted $377 to repair it (he planned to replace the entire cover assembly). I went on line and found the latch for $8.66 with free overnight delivery from Amazon. I could not have done the repair without this video. Thanks for saving me $330

    • @BobPaul
      @BobPaul  6 лет назад

      John Hendrie No way! That's insanity!! They carry this latch at my dealership's part window; I'd bet yours does, too. That's some serious stealership behavior quoting to replace the entire lid.

    • @barauna0193
      @barauna0193 5 лет назад

      Hey mate
      Do you still have the link of the page where you bought it? Can't find it

    • @deborahminess4668
      @deborahminess4668 5 лет назад

      @@barauna0193 I got one on eBay it's called an armrest lock or latch. Mine is a 2007.

  • @mitchlopez3317
    @mitchlopez3317 3 месяца назад

    Yeah, I had to watch four or five videos to finally figure out where the spring had to be loaded at put it in and out about five times… Took less than a minute to put it back together. Once I figured out you have to have it in the flat position to put the spring on that shelf. Thank you for the good video.

  • @JarivLetap
    @JarivLetap 4 года назад +3

    Make sure you open it up and check if it actually the latch on yours. I bought the latch and found that the plastic piece that the pin goes into snapped.

  • @censordeez
    @censordeez 6 лет назад +26

    Thank you! I was fighting that spring and you were like “DONT do this”
    I was doing that. Much appreciated.

    • @BobPaul
      @BobPaul  6 лет назад +1

      Glad I could help! I kept making that mistake, too!

    • @cameronfrank2332
      @cameronfrank2332 4 года назад +2

      What happens if you did put it in with the spring the wrong way? I can't get the part out now.

    • @jayrd423
      @jayrd423 4 года назад

      Cameron Frank what the f*** ??? This happen to me as well How did you fix ???

    • @thilltony3362
      @thilltony3362 3 года назад

      @@cameronfrank2332 Use something thin and tap out the pin and start over, but you probably figured that out a long time ago.

    • @ron3662
      @ron3662 3 года назад

      @@thilltony3362 I have the same problem, I put the spring the wrong way and now the metal pin won't come out, you mentioned to use something thin to take it out, I am not sure what to use though. I am a newbie at this.

  • @dannmcdowell8838
    @dannmcdowell8838 2 месяца назад

    Watched couple other videos on this subject. They didn't explain like u did with the spring. U made me a hero dad for the day. Thanks

  • @Jets725
    @Jets725 Год назад +1

    The fact I’ve been driving with this thing up for 2 years and I could have watched this short video makes me upset lol. Thanks for the upload!!

  • @Johnny-Cage
    @Johnny-Cage Год назад

    I'm not kidding when I tell you I just went 2 years with a broken console because the stupid dealership said it'd cost $700 to fix.
    Appreciate you man thank you

  • @pcer9973
    @pcer9973 11 месяцев назад +1

    2023 bro THANK YOU! My girls car latch just broke. Will replace today thanks to you.

  • @mikayocc
    @mikayocc 6 лет назад +11

    Thank you so much for this! I couldn't figure out why the latch wasn't closing, and it was the spring issue being wrong! It has been a year of trying to figure that out, and your video saved me!

  • @dt153
    @dt153 4 месяца назад

    Thanks for the video. I ordered the part on eBay and it took about 15 minutes to replace. Very easy.

  • @AltCTRLF8
    @AltCTRLF8 6 лет назад +39

    thanks for the upload. there is one other video for this issue but the guy has music playing, and i can't hear him talk.

    • @aquaflow1264
      @aquaflow1264 3 года назад

      I’m surprised ur evn on a Honda video with that photo I’d think FORD F 250
      MURICUHHHH FCK YEEAAAA

  • @fadiaboukhatro
    @fadiaboukhatro 6 лет назад +1

    3 hours struggling to fix it went to dealership asking 45 $ went to your channel and wooow fixed for free thank you soo soo much

  • @user-ov8nk4jh6w
    @user-ov8nk4jh6w Год назад

    Me too! Thank You. I looked at other videos, they didn’t show the trick about the spring. I wasn’t smart enough to figure that out, so once I finished, there was no spring pressure. Great Job! I sold cars for 36 years, but never worked on them. Honda wants to sell you the entire armrest, like someone said, about $300.

  • @loveangelmozart
    @loveangelmozart 4 года назад

    THANK YOU!!!!!!! I took off
    the latch to replace it and the bar that holds the spring fell into the “black hole” located between the seats. Finally found a place online to order it and fixed it today using your video💯

  • @steveeagle9000
    @steveeagle9000 4 года назад +1

    Much better then another video that had music in the background. Super useful and spot on. Thank you for posting

  • @ralphturner3798
    @ralphturner3798 5 лет назад +1

    I bought my replacement latch for $2.57 on eBay, but it took about a month to arrive from China. thanks for the instructions, especially about how to position the spring.

  • @comicbookprodigy995
    @comicbookprodigy995 4 года назад

    Thanks mate! Mine snapped yesterday, I ordered one with Prime for $7 and got it today. Scared the crap out of me how springy the new one was. Almost took my finger off. But now it latches like moss on a Mississippi tree stump.

  • @jaiprasad8989
    @jaiprasad8989 5 месяцев назад

    Thank you!! Easy to follow instructions. Installed the latch in minutes.

  • @johnt6890
    @johnt6890 5 лет назад

    Man, cannot thank you enough for your selfless effort to show all this, I thought I was going to have to pay the shop 100+ dollars (as they said). Word to the wise: do NOT lean over against this console door sideways with any real pressure, it will crack the little pin bracket/s right off, which is what I did. The thing should be designed better, but of course plastic is king. Anyway, you made it real easy, and cheap! You deserve a six-pack...

  • @adamweintraub6274
    @adamweintraub6274 11 месяцев назад

    I wish I had found this video and hour ago.
    Thank you. You saved my sanity.

  • @achillekagabo7013
    @achillekagabo7013 Год назад

    Simple and self explanatory video!
    Thanks for sharing

  • @kevinmcintyre1946
    @kevinmcintyre1946 2 года назад

    Ditto all these comments. Even more than the expense, this video saved me a lot of time I would have spent figuring out how the mechanism worked and how to disassemble it. Incredibly easy. Thank you!

  • @sertacipek5224
    @sertacipek5224 Год назад

    Thanks man, I had an issue with the orientation of the spring but this video solved it. Mine is much tighter than yours though it took forever to remove the pin.

  • @caseydecker
    @caseydecker 6 лет назад +2

    Great video. Thank you for listing the part number and the size of the bit needed. Unfortunately Honda now charges $15 for that little plastic part.

    • @pumista818
      @pumista818 5 лет назад

      i got it on ebay for 4.53 just last week

  • @dsodesign1
    @dsodesign1 3 года назад

    Thanks for pointing out the spring tab placement. Saved me buying a new latch or spring after going back and fixing it. Works great now.

  • @MrAnimalfries
    @MrAnimalfries 5 лет назад

    Thank you so much. My Honda dealership was trying to charge me 25 bucks for the part but found a USA seller on eBay that shipped it in less than 4 days for 5 bucks

  • @RampartPh
    @RampartPh 6 лет назад +3

    Thanks to you, sir - This replacement routine was a 10 minute diy job. Salute!

  • @turkfiles
    @turkfiles 3 года назад

    Thank you for showing us how to do it correctly. You pointed out all the important little tricks to get the job done quickly. Thanks again!

  • @lovelivemaine
    @lovelivemaine 4 года назад +1

    Nice informative video, thx for not having any distracting background music!!!

  • @OmarFakhry
    @OmarFakhry Год назад

    That’s the best video to explain it. Putting back the spring is a little tricky. Thanks 🎉

  • @chaos_flavored
    @chaos_flavored 4 года назад

    Just what I needed! Thank you for posting this! My husband was driving around with his console taped closed for I-don't-know-how long til I found out and found this.

  • @linaraq
    @linaraq 5 лет назад +4

    Perfect! I can’t imagine how much I saved doing this myself! $5 on eBay and it came in like 2 days. Thank you for making a good video showing how to do this.

  • @tap92660
    @tap92660 2 года назад +4

    I replaced mine in less than 5 minutes! I’m not handy at all when it comes to this kind of stuff, but you made it look so easy. Thanks!

  • @brianfox340
    @brianfox340 2 года назад

    This is all the stupid things I wouldn't have noticed on my first try. Thank you.

  • @tiaharris8791
    @tiaharris8791 5 лет назад +6

    Thank you so much! Saved me a ton of $! Also so useful listing the material needed I was done in less than 10 minutes!

  • @chuyitosjm
    @chuyitosjm 3 года назад +2

    thank you sm for this video you’re an amazing person they wanted to charge me 250$ to replace this smh

  • @yumiwatkins7527
    @yumiwatkins7527 9 месяцев назад

    Thanks for this straight forward explanation!! God Bless 🙏🏼

  • @dburnett99
    @dburnett99 6 лет назад +2

    Thank you for your great video. It worked! The other video on this topic played music in the background and I could not hear a word! Thanks for taking the time to create the video. You can find anything on You Tube!

    • @angelinafailla6848
      @angelinafailla6848 6 лет назад

      David Burnett I saw that one too I was like didn’t this guy watch his video it’s insane lol what was he thinking

  • @relog09
    @relog09 5 лет назад +1

    You are awesome man. I spend the entire morning missing with the spring.

  • @camilorios4092
    @camilorios4092 Год назад

    Thanks, very helpful, in the honda dealer is 20 $ , I just replaced mine, Thanks for the video 👍🏼👍🏼

  • @erickmedrano2074
    @erickmedrano2074 Год назад

    Just wanted to say thank you sir! Your video helped me out a ton.

  • @douglascarper
    @douglascarper 2 года назад

    The best vídeo, thanks!! São Paulo- Brazil

  • @bobby321321321
    @bobby321321321 Год назад

    Thank you so much! You have helped so many of us!!

  • @sabacat
    @sabacat 2 года назад

    Thank you SO much! $9 on Amazon! You've saved me so much money!!!! 😁

  • @sn4kebyte44
    @sn4kebyte44 2 года назад

    Saved me tons of money and time! Thanks heaps!

  • @16CaseR
    @16CaseR 11 месяцев назад

    So grateful for this video!! Trying to fix the middle console and attach the entire top because it was broken when I purchased the vehicle. Do you have any videos on that too? Thanks again for posting the video

  • @snwbubble
    @snwbubble 2 года назад

    Thank you! Not all heroes wear capes.
    Though on second thought you could be wearing a cape for all I know...

  • @kevindavis1219
    @kevindavis1219 2 года назад

    Mine just broke! THANK YOU for the video!

  • @DrMack9696
    @DrMack9696 3 года назад +2

    Excellent! Thank you so much! That's such an easy and satisfying repair. $0 from my local Pick N Pull and I'm good to go!

  • @cynthiapike26
    @cynthiapike26 4 года назад +1

    Thank you so much! It was installed wrong on my "new" car and they had been using duct tape to keep it down. All l had to do was to put the pin and spring in correctly!

  • @supersixseven9827
    @supersixseven9827 2 года назад

    Perfect. I didn't have the spring on top. Thank you!

  • @ajg8314
    @ajg8314 Год назад

    I’m happy for everyone’s success. Sucks that my pin won’t fit in one of the latch holes of the new latch. I have to use a drill to make the hole a little bigger.. hopefully if I have time tonight… 😢

  • @lanalewis2460
    @lanalewis2460 6 лет назад +2

    Thank you so much, your video was super helpful. It came apart easily as well as easily replacing the latch. I am so proud of myself. I did get the latch from a Honda dealer as to order on ebay was going to take to long to receive.

  • @williamcarson513
    @williamcarson513 Год назад

    Thanks for the video it worked exactly as shown!!!!

  • @InspiredLivingz
    @InspiredLivingz 5 месяцев назад

    Great instructions, thank you for posting.

  • @redeyesagain
    @redeyesagain 8 месяцев назад

    Excellent video Bro.. Point on and very much appreciated.

  • @stevo215
    @stevo215 7 лет назад +2

    Mine just broke yesterday. Thank you for the upload. Much appreciated.

    • @BobPaul
      @BobPaul  7 лет назад +3

      Lol! Glad it helped. Tell you the truth, I uploaded this so that I won't make the same stupid mistakes when I have to do this a third time =D

    • @stevo215
      @stevo215 7 лет назад

      BobPaul it's much appreciated. I only wish I had the same issue. The hinge on my is broken. Facing the hinge, the right loop is broken so I can't house the rod without it falling out. You won't believe how much the armrest cover is after-market.

    • @BobPaul
      @BobPaul  7 лет назад +1

      stevo215 oh, that sucks. Is it just cracked it is there plastic missing from the loop? If it's just cracked you might be able to repair it with JBWeld or similar.
      Actually, if there's plastic missing you might still be able to JBWeld a metal washer of the right size to the inside edge of the broken standoff.

    • @stevo215
      @stevo215 7 лет назад

      Yeah, it cracked and the front half of the loop broke off. I think I put too much force on it and after a while, the stress broke the plastic. That metal washer idea isn't a bad idea. I considered soldering the plastic but it would like just break again. Thanks for the tip.

  • @raybeyond6
    @raybeyond6 6 лет назад +5

    Thank you for your video. I can save lots of money

  • @caraeuler2927
    @caraeuler2927 3 года назад +1

    I can tell this is exactly the information I need. Thank you so much for making and posting this video.

  • @dennisc.8827
    @dennisc.8827 3 года назад

    This was the perfect video! Unfortunately for me, my latch assembly was fine but one of the loops that holds the pin in place broke on the lid...

  • @eneserdem1257
    @eneserdem1257 Год назад

    Thanks for the detailed explanation and tips.

  • @Stevieloco
    @Stevieloco 3 года назад

    Watched 3 shit videos before I found yours. Thank you so much. Could have saved me a ton of time and pinched fingers.

  • @johnrodriguez2922
    @johnrodriguez2922 2 года назад

    Thank you so much cus I'm having problems with that now!!!! So frustrating

  • @Sam-ek2sj
    @Sam-ek2sj 4 года назад +2

    Hey man, just wanted to say thanks for the video! It was extremely helpful!

  • @lightworker303
    @lightworker303 4 года назад

    Thank you very much. I kept installing it with the spring lever below, not above the shelf. Was driving me nuts!

  • @rafmanguerrera5
    @rafmanguerrera5 2 года назад

    Explained beautifully 👌

  • @steverob2886
    @steverob2886 3 года назад

    Thank You BobPaul for you great video and Info !

  • @TET2005
    @TET2005 3 года назад

    Dude... I subscribed to your channel cos your video helped me to fix it up quickly. Otherwise it is like a puzzle to most ppl!

  • @tonil7507
    @tonil7507 Год назад

    Thank you for your help!! I'm so proud that I got this by myself with your video.😊

  • @kevinsnewslotchannel
    @kevinsnewslotchannel 3 года назад

    Thank you for the video. you saved me a lot of money. Thank you 😊

  • @TET2005
    @TET2005 3 года назад +1

    On the point bro...

  • @coffeeagent1
    @coffeeagent1 Год назад

    Thank you so much for this! I replaced my sister's armrest clip thanks to you!

  • @jsprout73
    @jsprout73 5 лет назад

    Thanks for this video. Perfect instructions for a 2010 Honda Civic! You saved me lots of time and money doing it myself.

  • @user-ov8nk4jh6w
    @user-ov8nk4jh6w Год назад +1

    Question, do you have a video replacing the center AC vent? The one to the right of the steering wheel. BTW, Honda will not sell you the latch, they will only sell you the armrest.

  • @Munchito696
    @Munchito696 Год назад

    Finished! Nice and easy, thanks!

  • @coky1112
    @coky1112 2 года назад

    Thank you so much . I really needed to see this

  • @aquaflow1264
    @aquaflow1264 3 года назад

    March 2021 finally hvng this prblm 1st time in my life

  • @Paoloskyxrd
    @Paoloskyxrd 2 года назад

    Thanks for the video. It helped me big time.

  • @rdavis1929
    @rdavis1929 2 года назад

    Thank You! 2:25 was key for me

  • @DaffiYum
    @DaffiYum 6 лет назад

    Thanks soo much, just fixed my armrest. It's been bothering me for a month!!!

  • @ricky13ricky
    @ricky13ricky 3 года назад

    Most helpful video... Thanks

  • @jb3587
    @jb3587 4 года назад +1

    Just changed mine, thank you! 🤗

    • @Mr.DoobieDoo
      @Mr.DoobieDoo 4 года назад +1

      I swear he’s a life saver just did mine today

  • @cakepower1
    @cakepower1 3 года назад

    Unfortunately I was unlucky, I ended up buying a latch without checking what was broken.
    I found out the plastic circular part the metal rod goes into broke which meant I needed to replace the entire top console or door peice whatever you call it, atleast I have an extra latch handy
    But this car isn't winning any beauty contest so I just drilled a hole above the circular part and managed to fit a small zip tie in a position where it will hold the rod against the console door and it works good as new 😂
    The hole is right above the latch and isn't really visible unless you look into it when it's open so that's a plus

  • @thereddevil1754
    @thereddevil1754 4 года назад

    I just got a similar cut in my thumb like yours while trying to take the spring,hope could fix it later ,pending project , the spring was the hard part for me

  • @cooperthedrift8540
    @cooperthedrift8540 6 лет назад

    Thank You Sir! the only othwr video i could find on how to install this lil thing was some dude playing elevator music louder than his instructions

  • @PBC-kd8up
    @PBC-kd8up 3 месяца назад

    Thanks for the help. Great video

  • @kanoasomera9970
    @kanoasomera9970 2 года назад

    Thanks this video helped me fix my center console for $6 👍🏽

  • @MiguelMartinez-pn2wu
    @MiguelMartinez-pn2wu 5 лет назад +2

    Thank you for the tutorial. It’s worked great
    👍✅

  • @skylinegtr336
    @skylinegtr336 Год назад

    Excellent video, thank you!

  • @Kieshpie
    @Kieshpie Год назад

    This helped me a lot today! Thanks for the knowledge 👏🏾👏🏾👏🏾

  • @omaribrahim8048
    @omaribrahim8048 2 года назад

    Very helpful Video, thank you so much

  • @megaman247
    @megaman247 6 лет назад

    I knew I should have watched your video first. I goofed up on the spring part.

  • @zerocks88
    @zerocks88 3 года назад +1

    Thank you so much! This is exactly what I needed :) I've superglued all the pieces back together but couldn't figure out the orientation, basically all of my parts had cracked because my ex smashed the lid down so hard and it's been like that for like 5 years lol FINALLY FIXED!

  • @Renee_Lopez
    @Renee_Lopez 2 года назад

    Awesome thanks for the video. Helped me out a ton 2 min job on my 09 civic si

  • @abbysworld13
    @abbysworld13 3 года назад

    Excellent video... super straight forward and to the point! My latch works perfect now thanks to you

  • @Kini_the_Fox
    @Kini_the_Fox Год назад

    Thank you good sir, you are my hero