Lenovo IdeaPad z510 - Disassembly and cleaning
HTML-код
- Опубликовано: 11 сен 2024
- In this introductory video, we will show how to disassemble laptop Lenovo IdeaPad z510.
Our team will show all necessary steps of disassembling, however don't hesitate to ask us if you have some questions.
Be careful this may damage your laptop or other equipment! We are not responsible for any damage to your device!
If you finding our video helpful to you, please don't forget to give us a Thumbs Up!
Thank you so much! I could add memory, now very comfortable.
i had to change thermal paste . so I tried changing .
Thanks for ur tutorial.
but i Was unable to open the Graphics Card Heat pipe because the screws were very tight . i tried and tried and after long struggling i Just lifted to CPU Heatsink by little bending and changed for CPU alone .
And its temps are now really down.
Thanks for the CPU But please tell fix for GPU Screws
what screw driver do you use .
Hello. I made my same laptops disassembly and cleaning after this video, and i had to change the USB/card reader/audio board too, i made it too. My problem is, when I assembled, and I tried to turn on, it did not turn on, only for a bit, the fan started to rotate, and shut down. I tried to hold the power on button for one min after I removed the battery and only with the AC adapter tried to turn on, again. It made the same thing, but as a "blinking" power on button, and the fan rotated again alternately: when the power on button lighted, the fan rotated, when the power on button was dark, it stopped and so on, repeated, continously. what should be the problem, do you have any clu?? thanks
I have the same problem but I never opened it... please let me know of you have find the solution to this.
спасибо за видео ..но..! клава снимается не поддевая чем либо сверху (есть возможность царапнуть пластик) ,а выталкивается снизу через отверстие от снятых болтиков ее крепления(в мануале это указано),ну и покоробило что термопасту,хоть и аккуратно ,наносили металлической стомат. лопаткой на кристалл ? для чего так делать ? неужели нет спец.пластиковой лопатки ?в остальном все ок !
Спасибо добрый человек!
is that same with z500 ? i'm thinking to swap my z500 into z510 case because of quality
Hello there;
I have this model, I turned off the laptop screen in the evening and left the pc in standby mode, when I wanted to turn on the pc after about 3-4 hours, the power button did not react at all, when I plug the pc into the charger, the charge light turns on but the pc does not turn on. (Note: Computer comfortable 7-8 years and it has never been changed, the videos I watched said that the battery may be dead, the battery can be removed and the pc can be turned on with a direct charge cable) What would you recommend? Where do you think the problem is?
Please share me the solution... I have the same situation
Did you solve the problem?
@@cemcancemcancemcan I haven't gotten any solutions for this.
Which screwdriver do you use for removing? Could you name specifics of the scredriver
I am sorry, but hard to say now the exact type.
do i have to put on the paste because I don't have any
If you touch the component which had the paste, you should replace it.
hello do you have an idea for the screw size at the back? I want to replace mine
I want 4 GB extra RAM which RAM suitable for this...
ddr3 sodimm 1600 mhz
You can remove the fan without messing with the paste...
never buying Lenovo again, Dell forever going forward
can i ask why? curious!
Loreal A. Repair and disassemble on Dells are significantly easier. Also, availability of parts for their business line (Latitude and XPS) are easy to come by and inexpensive relatively speaking.
My 510 has been through 8+ years hell and back in machineshop/office environments, backpacks, etc. I just changed the battery today (long overdue) otherwise not a single problem.
@@josephhaim6191 that’s great. But check out frame.work
@@josephhaim6191 same here dude. Mine's 7yrs old, still running like a horse. 2yrs of working with google earth, gps based projects, 3yrs of autocad and 3ds max, 2yrs of coding, this legend has been through a lot. Even i need to replace the battery, long overdue. Otherwise, she can still take a hit...
лютое дерьмо. что бы поменять винчестер нужно разобрать весь ноут...
I'm never buying lenovo ever again this was very anti repairability...
Yep 😢