VRSF Catless Downpipe Install and review - BMW 328xi N20 and N26
HTML-код
- Опубликовано: 29 сен 2024
- This is a DIY instructional video for installing the VR Speed Factory Catless Downpipe for N26 motors on a BMW 328xi.
Also a full first impression review included.
Helpful tools:
amzn.to/2qBGwWA (SE 7503SD-4 Power Extension Bit Set for Drills)
amzn.to/2vqsX0S (Ares 3/8" Oxygen Sensor Socket)
amzn.to/2H45atd (MAXPOWER 9-Piece 3/8-inch E-Torx Star Socket Set - E7, E8, E10, E11, E12, E14, E16, E18, E20)
amzn.to/2EPaVoJ (Craftsman 20 Piece Standard & Metric Socket Set)
amzn.to/2JRZYGG (PORTER-CABLE PCC606LA 20-Volt 1/2-Inch Lithium-Ion Drill/Driver Kit (One Battery))
Many thanks to:
Bryan from Kies Motorsports
Www.kiesmotorsports.com
@kiesmotorsports on Instagram
Mike at Extreme Powerhouse
Www.x-ph.com
@extreme_powerhouse on Instagram
Tiago from VR Speed Factory
Www.vr-speed.com
@vrspeedfactory on Instagram
Great job man! Wow, that’s amazing you can get it from the top... the n55 is no room for that at all! Thanks so much for the shoutouts 👍🏼👍🏼
Yeah, there was more room than I thought! I was reaching down just to see how deep the V-band clamp was and it was closer than I thought. Thanks so much for your help!
Hi do you think vrsf will fit 2013 bmw 320i xdrive n20 engine. I am getting mixed reviews and hard to find a downpipe for my car with decent price. thanks
If you email me at info@kiesmotorsports.com, I can help
Hey ProjictF30 I just installed a Active Autowerke FMIC ,catback exhaust, and a ER catted down pipe and charge pipe with bootmod3 stage 2 on my 2016 F30 328i, and I used your video again for my install because I think it is the best diy for downpipe on a F30 328i, thanks again.
Did your check engine light come on ?
Can you upload a cold start?
Wow, sounds extremely nice. I have a stock F32 N20 that I'm now considering this mod for. Thanks!
4 years later and I’m wondering what happened with the build. Currently own a f30 with the n26b20 and I’m in the early stages of upgrades. Love the videos and knowledge he had to offer
I have a Daily 2014 M-Sport and the downpipe did absolutely nothing for the car. It seems like it took away bottom end Power vs the back pressure of the cat
@@skillz1855 tune it and then you’ll feel a difference
@@n52sosa well I did, it transformed the car. The thing spins out in 2 gear. I think I'm used to driving my garage kept F90 comp stage 2/dp
@skillz1855 Is that a good are bad thing? I'm thinking of doing the same
So instead of buying a new down pipe, just take out the stock one and with a screw driver crash out the catalytic converter components and you a stock catless converter. I am not a mechanic but this is my idea..
Looking to get VRSF Catless downpipe on my 2007 bmw 328i.. it says online that it’s N20 & N26 328i 2012 - 2017 … would it still work for my car?
Did you get the check engine light after you installed the downpipe on your N26?
I have a question i put on my vrsf downpipe and a week later i get a p0420 code i added a 02 spacer on rear when i did the install not the front after code poped up i put the 02 spacer in the front and code popped up even quick pls help ig:goofybadass check out my bagged f31 msport but please help
N20 btw
What are the sizes for the v band clamps?
Do you need a tune after installing down pipe ?
very detailed, sucks its 360p
hey bro. thanks for this video. installing my downpipe tomorrow and you really helped make me feel more confident in doing it myself! :)
Thanks for the info! I ordered a VRSF downpipe for my F30, but the installer is telling me it will be 4 more weeks for VRSF to ship out the downpipe with the high temp coating. Can't wait to get it installed!
watch this to prep me for my install tomorrow on my 228i n26, thanks for the detailed video!
Do you get the check engine?
Quick question. Is this a full bolt on. No welding required correct. Just want to double check. I want to be able to remove it when I need to pass inspection.
Correct!
Can u reuse the rubber seal or have to have new one? Thank you for all the good info im doing mine 2morrow
Stock exhaust??
Hey Rich, so do you have a tune on your car? Do you have to have a tune if you install a down pipe? What’s the best approach to get a tune if you know? Thanks man, appreciate the video!
Ok I just installed my Vrsf down pipe on a n20 and I get a check engine code 1800 what code is this and how do I fix it and yes I have a JB4 on my car also
will the BM3 can delete the CEL for bmw f30 328i with STOCK TUNE?
well I don't know what you mean by stock tune. I run a stage 2 bm3 tune and you can clear codes.
This code or CEL will not show if you get it tuned by BM3 or if you use the high-flow down pipe and FMIC upgrade tune.
I used to have a 335 now i have a 328 if you make your car this loud you're a goober
I know this is an old ass video, but I wanted to know where u got those v clamps an what were the sizes? I’m looking into getting a down pipe myself for my N26
Have you found the sizes yet?
Nope
I found those v-clamps/gasket on bmwpartspros.com. Search under OEM parts for your specific model, and look around the exhaust sub menu. Should have an exploded diagram for the OE dp that has both the gasket, and v-band clamp. In addition you need the 2nd v-band clamp that goes between the dp, and the mid pipe. My '16 228i n26 was #'s 2,3,6. 18307581970, 18307606136, 18308632361. $80 total. Hope that helps.
I installed my own downpipes but now when I rev it and let off the gas it sounds like metal grinding. Only when I let off the gas tho . Can I get your opinion. Thanks
I am from Recife in Brasil South America and I loved your videos, so explained and attention to detail, I own a 2018 BMW 32Oi M sport so like yeah awesome, and also I am planning on doing a BootMod 3, have you head of it what you think? I am going to do a stage one with 93 octane...
foam cover is to protect you from the noisy engine.
Hey, have you experienced any bad smells ? thanlks
Is the smell of monoxide bothering?
I see that UGA shirt and license plate haha. Do you live in Georgia? Because I do and my county requires me to have emissions tests :(
Stay away from CircuitWerks downpipes, they did not fit, and cause very large exhaust leaks, especially when cold.
Did your check engine light come on because of it ?
Can you be RUclips friends
Great video. I love mine.
360p? get a camera
Vili Karac haha. The stupid editing software that I was using knocked it down. I've changed and have since been uploading in 1080p
Vili Karac rofl
@@projectf3075 I appriciate the effort in any case.
Great video! Was your exhaust completely stock? Also, did a CEL come on after install? Thanks.
This
I have the AWE touring edition axle back exhaust + AWE performance midpipe + injen CAI. How will this VRSF catless down pipe sound with my current set up? And what about the highflow catless? is there a difference? I also want to pass emissions and CEL....
im about to install everything you have how does the car sound?
What gasket did you end up using ? Please let me know I have a leave
Is there any drone sounds?
Is the car 100% stock otherwise ??
Got the same one as you! About to put it in. Does it decrease the mpg horribly?
Where did you get the new DP to Midpipe clamp? My car is currenly apart and now that I've gotten to that step I dont want to proceed and break it without an extra on hand
Why is all these videos popping up all a sudden?
Guys why do we need to remove the cat sensors if I’m on BM3 stage 1?
Way better description , better than Kies .
hey brother I have a question from the donwpipe, I want to put mine one. Did a check engine light turn on your car?
So did you install it? Does the check engine light go? How to get rid of it?
very informative video, thank you!
Zen0s Cheers Man! Thanks for watching!
Hey, I just got bm3 stage 1 in my n20 engine but I don't hear burbles specially when I'm revving while drive. So I'm thinking of getting catless downpipe and have ordered one. Do you think this will make the sound louder?
Muffler delete is how I got burbles out of mine
Hey! Could you tell me where you purchased that v band that you broke? Happen to be doing it on my buddies car and this vid has been extremely helpful!
nice video. do you get a check engine light come on.
Great video dude
Check engine light?
bmw_bri_328i yes, but I clear my CEL with BM3
Do you know if they make a catted downpipe for the N26?
I think VRSF makes a catted version for N26
Good stuff I like the skrillex on the background 👍😎
What’s the name of the Down pipe ?
VRSF Catless Downpipe.
Thanks for the video bro. Extremely helpful.
hows the smell
Hey, how did you perment open the valves on your stock exhaust?
unplug the connector at the flap while it's open, this will keep it always open. Or there's an option in Bootmod3 tune. I did the first option (When I still had my muffler)
What size is the clamp from dp to mid pipe?
c'mon reupload this video!
Great video man! Very educational as I am going to attempt doing this and recording it myself. and also, is it possible to do this install without having to buy any clamps or seals? (assuming my downpipe comes with the necessary stuff)
Hopefully you at least bought a seal.
thank you good to see
Well done young man
Putting mine in today! I’m excited to see how it turns out!
Is the install the same as the n26?
328i xdrive 2013?
Just bought the same one , looking forward to seeing it work !
thanks! i'm getting one
fondoo you should! It's a great DP
great video, I have the ER catted downpipe for my N20 528i to install soon and was looking for videos for some time, thank you, and I am fortunate to have a lift in my home garage, it paid back for itself after a couple jobs.
Neil Rampersad , cheers man! I'm glad that you found this! Let me know how it goes! The install was not so hard. It was just very time consuming. Stay patient and ensure that all your connections are secure and tight. Definitely want to avoid exhaust leaks. Good luck and thanks for watching!
Neil Rampersad and by the way, I am so jealous of you and your lift!
lol some day you will have one
Did you get a cel?
Did you buy a down pipe for the n26 or n20? Curious of the difference. I have a n26 as well. Getting ready to to order one.
Josh Heineman I bought for my motor, N26. There is a difference so make sure you pick up the right one. ER and VRSF both make great catless DPs for N26. I heard Wagner has one too. Stay away from Circuit Werks.
Let me know before you order. If you go ER, I'll recommend you a guy. If you go VRSF, I'll recommend you a different guy.
ProjectF30 thanks! Great videos !! Keep them coming!
Josh Heineman Cheers man! Thanks! Let me know if I can help! Easiest way to find me is on Instagram - @richProjectF30
ProjectF30 Why is circuit works bad?? I was about to order the circuit works down pipe. Thanks
CEL?
Pratik Chowdhury yes I got a CEL. I use bootmod3 to clear it
ProjectF30 will it pass inspections?
Will the JB4 remove the CEL caused by this downpipe??
It can clear it, but it will come back. A better tune is BM3 which does clear the codes
Thanks man, gr8 video, very informative, im planning to do this with my b48 cooper s. Much the same motor I believe.cheers j
Hi everyone. I am about to order this exact DP for my F30 N26, and i was wondering if the CEL will pop on if i install this into my car....
Rahil Ahmad yes it will without a tune
Car is 100% stock right? Except for the downpipe i mean
Do you have a vibration around the 2k-3k range?
mjn papi it's not consistent. Shows up every so often in that range, but not all the time.
I get a vibration an around 2100 every time, kind of annoying
does your n26 still have the secondary catback?
Henry Johnson does it still pass if it has the second cat with a catless downpipe