Repair & Refresh Hex Drill Driver | Makita TD021D
HTML-код
- Опубликовано: 9 дек 2019
- Repair & Refresh Hex Drill Driver Video
I found this hex driver from Japan recycle shop only 5$. It didn't work because its head was stuck. I replaced the stuck bearing, cleaned dusts, add new grease. After the repairing it works very well, you can see it test it at the end of the video.
I hope you find something useful & enjoy this video!
I am happy to receive your feedback, advice, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments-------------- Хобби
Awesome video as always and as A Swedish citizen it is always nice to see SKF bearings through out the world. SKF = "Svenska kullager fabriken" = "The Swedish roller bearing factory"
Unbelievable robust and solid mechanics! I've never seen anything like that in a simple screwdriver. Makita is the best!
This is not screwdriver, this is impact driver.
ruclips.net/video/vVTylFpsVs4/видео.html
@@shaiba5095 It drives screws in. Impact drivers normally have way more torque!
well, it costs almost the same as the "full-size" driver. got one recently. nice machine, light and capable
you are excellent and meticulous in treating all unloved tools the same and reviving them from near-death conditions! your videos are great to watch and I have learnt a lot from your lessons.
Wow, thank you!
貴方は素晴らしいプロです参考になりましたありがとう御座います😊
You give old unused gadgets new life
Man that thing had a LOT of. balls. Another great video. !
EXCELLENTE (EXCELLENT) TRABALHO (Work) !!👏👏👏👍
Thank you so much it is so great
🇵🇱👍 Dobra robota i ładny sprzęt 👏
Excellent work seems powerful tool, have a nice day !!!.
neat! it's a screwdriver but instead of a clutch it has a impact driver head. great find. i'm jealous.
Yes it is mini impact driver drill.
Top !! Máquininha bem forte e útil ein ainda mais tendo impacto
Thanks 😊😊👍👍👍
عمل رائع شكرا لك اخي
Nice to meet you. I have a TD021D.
Super job keep up the good work.
Thank you!
Красивая и интересная работа. Тоже такую отвёртку хочу!))
Nice work
That magnet tool sure comes in handy.
Jamais utilizar desimgripante como lubrificante! Like show pelo trabalho
Você é o melhor.
Hi Gear Show 👋👋👋 very good restoration drill 👍👍👍💣👌🏽
Hi Кошмар Кошмар! 👋👋👋Thank you 🤝🤝🤝
When lettering, don't bother with a brush, use a cooking sponge (they are firmer than say a dish washing sponge). Dip in paint, apply paint. That's how they do it in the factory too, just with a bigger sponge and a mechanical arm.
Very nice video! 🎄like it 262
You’re great at everything! Except for painting!😂
Very cool and usefull
Yes it is.
О, у меня такая же, 7 лет - полет нормальный. Вещь.
You are great sir
Thank you!
Why no grease between most of the moving metal parts? Seems like a constant modus
Good work brother
Thank you brother!
God I want one of these sooo much
Amazing 👍👍👍
What did you use to clean the white body. I own this great tool which is still working good after 10 yrs+.
Thanks for the video.
your viedios are so amaizing
top job
Looking at the cover image I thought it's a dirty lightsaber. 😂
We'll have to wait a bit longer for those videos.
Perfect...
You are a good youtuber you are not wasting time of intro
Good 👍👍👍
Молодець . Так тримати
I think first part of video is missing, otherwise good restoration.
So ... this is you, Mr. Tool. He's here
Yeah..I agree with you!
@@tamzeedzafor lĺloj
@@naveenanandkar8403 i don't understand what u are saying?
Крутая отвёртка. :)
Nicely done, great Driver. Try putting your paint on a board and rolling the raised letters over it.
That great idea, thank you!
@@gear_show Is the first part of the video missing?
yeah, this idea came across my mind also
These videos are making me question why I am buying new tools!! I feel inadequate now!! 😩😩
Máy này chưa vệ sinh chắc cũng gần củ. Ah này người VN chắc luôn. Đúng cho 1 tim nhé
О Макита! Обожаю Макиту!
Yes, me too.
Poca lubricación okkk...Saludosss
two questions
1-is there a way to repair the bearings or is it just best to replace them?
2- what kind of grease do you use?
It is take time to repair the bearings, replace them is good choice. I use grease number 2 it is make for small gearbox.
You can't really repair bearings and they pretty much always have a code on them which you can use to find a replacement and they are typically pretty cheap.
@@gear_show nice job man! Salutes from Colombia
Like your videos. Please, Can you tell me what's the white powder you used to clean plastics with water thanks. Best regards from France 👍
It is detergent powder.
マジで助かる
I was hoping that you would replace the motor with a new one since its outer casing is rusted and probably the insides too. But nevertheless it's an amazing vid.
Doesn’t matter because the copper and magnet that used to run that motor not gonna rust anyway 😂
Super !
Thank you!
got a black and decker one of those for free all i had to do was charge it cuz it was missing a charger
rất hữu ích
where to buy replacement parts
👏🏻
I thought that the vinegar was “malt vinegar” but then I read the label and realised it’s just been used a lot 😂
Yes I use it one time.
gear show wow, only once and it went that colour, I’m surprised we put vinegar in food now 😂
Think you get either brown vinegar, or clear ones in stores
PureRushXevus on the bottle it says distilled white vinegar. I know there’s different kinds.
super genial pero donde compras las herramientas ?
Thank you! I buy them from Japan recycle shop.
Hi mate! I´m from Azores Islands (Portugal) and I love to see your videos!
Where can i buy one of this for me?
Muy buenoo 🇦🇷🇦🇷
Thank you!
What is the 46pca tool box??
It is good
Qua o nome desse produto para limpeza obg
а чего видео без разбора корпуса, или формат немножко решили сменить? Да и интересно первоначальное состояние.
Ошибка какая-нибудь
Мне вот тоже интересно.
Скорее всего так смонтировал
Просто инструмент практически новый, это не реставрация, а просто чистка. Видео для количества.
Good hit🇮🇳👍👍 Kuki
you can do video about replace battery this model
The build quality is superb, but it was utterly filthy inside. I've stripped and rebuilt some bike parts like that, with similar problems.
Is that a Lithium battery? if not, can it be converted?
18650 Li-ion battery i guess
I find myself watching these videos compulsively whilst at the same time scratching my head wondering what the point of it actually is.
Wow
Humm that motor looks like it has potential to be replaced with some sort of upgrade
what kind of grease would you recommend?
I recommend grease number 2.
Also pencil number 2 :)
6:20 doesnt looks like distilled white vinegar. pretty dark for white
Robert Baleno it’s black vinegar
Was the beginning of the video corrupted or something?
It is missing the beginning.
You should use baking soda to clean the plastics!
Okay thank you for sharing!
First time we see rinsing the plastic body! 😂
Watch a lot of your videos and most of the time you do a much thorough job kinda seem like this was a rushed one.
Tuyệt vời
I want to buy it too
Makita man
なぜ最初の分解のシーンが無いんです?
What happend to the first part of the video.
It is missing while rendering.
@@gear_show are you going to reupload.
...Pretty sure the first part of the vid is missing. Mine starts at the piece in the vice.
He got a new parts washer pan, wohoo!!!
That 'white vinegar' isn't very white
Yes, you're right. This video is missing.
eeeeehm... where is the begining of this vidéo ? it starts with the drill head cleaning.
Смазка где?
any missing video
lubrication must be made more better then in video i guess ...
Obviously at 9:43 it shows you put both socks on then your shoes
Где начало то?
Все хорошо, но зачем эти понты с раскладыванием запчастей?
It is my mistake.
vietnamese ?
你是台灣人嗎?
你是台灣人?
Are you also a painter😅😅
👍👍😎🍺🍩🔧🔨
जय श्री राम 🙏
you put zero grease in tight spaces
Việt Nam vô địch
Omg
マキタ!!
👏👏👏👏👏👏💯💯💯💯💯👍👌🇧🇷🇧🇷
а ты колесо этой хернёй открути