Testing the NEJE MAX 4, a large and powerful laser engraver 😳

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 29

  • @sterlingniko7325
    @sterlingniko7325 10 месяцев назад +1

    Perfect no BS video. Subbed!

  • @namelessme6363
    @namelessme6363 6 дней назад +1

    Ceramic tile..... the tiger is permanent?

  • @thepagan5432
    @thepagan5432 Год назад +1

    Decisions, decisions, I'm still saving but should be in a position to buy soon. This Neje looks good and powerful so closer to the day I will have to weigh up the pros and cons of 3 systems so far. Thanks Morgan, the laser on this one does do a good job, pretty quickly. Thanks for posting, appreciated 👍

    • @bawbreizhartwood
      @bawbreizhartwood  Год назад

      Hello the pagan
      In fact, I have tested a lot of lasers and I must say that I like this one because it is robust and scalable according to your needs, you can choose several different laser modules or enlarge the working surface

  • @lerangesoundstyle6044
    @lerangesoundstyle6044 10 месяцев назад

    Thanks for the video. Am I correct in saying you tested without air assist? If yes, would it have given even better performance with air assist?

    • @bawbreizhartwood
      @bawbreizhartwood  10 месяцев назад

      yes, this machine already works very well without air assistance, but adding a good pump will give you better results.

  • @gpanizzolo6090
    @gpanizzolo6090 Год назад +1

    Muy buena adquisición! Que la disfrutes! Un abrazo
    Germán, desde Lomas de Solymar, Uruguay

  • @jaroslawrzepecki5081
    @jaroslawrzepecki5081 Год назад

    Good video!
    In how many passes did you cut that 0.25inch MDF?

  • @srenanderson-schmidt621
    @srenanderson-schmidt621 11 месяцев назад

    Are you using your own settings or what?

    • @bawbreizhartwood
      @bawbreizhartwood  11 месяцев назад

      the parameters are to be defined according to your wishes and the materials used

  • @Zzrdemon6633
    @Zzrdemon6633 Год назад

    Kind of makes me regret getting the xtool now, z axis is a game changer, large frame and half the price

    • @bawbreizhartwood
      @bawbreizhartwood  Год назад +1

      the world of laser engravers is evolving very quickly and it is not always easy to make a choice

  • @joanthompson8586
    @joanthompson8586 Год назад +2

    Amazing!

  • @snjezanzivak1632
    @snjezanzivak1632 Год назад

    Hiiii i uave the same laser and i have one problem that i dont know how to fix im watching your video and your machine is not doing that as mine and i dont know why is my doing that.
    When i send laser to do something and when its done or finished with work it lifts module up and it goes to front left as always but when its done with work and when it lifts module on Z axis and when it touches limit switch on Z it starts jumping up and down its like it wants to go more up but it cant it hits limitswitch and goes down few mm and it goes up again and so on for few times and then it goes front left....but when i send the machine home its not doing that it is ok it touches limitswitch and it goes down few mm and goes home..... do you or anyone knows why is my module jumping....thank you

    • @bawbreizhartwood
      @bawbreizhartwood  Год назад +1

      yes, it does this because you have entered a value in the "material thickness" box. You must not enter anything in this box.

    • @snjezanzivak1632
      @snjezanzivak1632 Год назад +1

      You are right it does that because of that

  • @jackthompson5092
    @jackthompson5092 Год назад +1

    A pretty neat toy Morgan.

  • @BashirAhmad-s3m
    @BashirAhmad-s3m 7 месяцев назад

    price

  • @lefouineurdevideoinfoetc..3896
    @lefouineurdevideoinfoetc..3896 Год назад +1

    ✨✨