Brazilian Blowout Smoothing Solution Training Video
HTML-код
- Опубликовано: 22 мар 2018
- Small regimens of Original and Zero solutions available at www.valley-beauty.com/brazilia...
Directions:
1. Prepare the surface. Wash the hair with Brazilian Blowout Anti-Residue Shampoo, specially formulated to avoid stripping color. Be sure to really scrub around the hairline, nape of the neck, and from the mid-shaft down.
2. Towel dry the hair, just a bit, to extract the excess moisture from the hair. You need to keep most of the moisture in the hair for the Brazilian Blowout Professional Solution to absorb and spread evenly. If the hair dries during the application process, use a water bottle to re-wet hair to make it easier to apply and spread the solution.
3. Divide the hair into 4 even sections. You will start from the base of the head and work your way to the top.
4. Apply the Brazilian Blowout Professional Solution section-by-section, using an applicator brush and a comb to pull solution through the hair. When applying the solution, make sure you are dusting the product on the hair; apply directly to the root (not scalp) and work the product from root to end - Less is more. For Short Hair use ¼ oz. to ½ oz.; Medium Hair use ½ oz. to ¾ oz.; Long Hair use ¾ oz. to 1 oz. ZERO+ Notes: The ZERO+ formula consistency is a bit thicker than the original Brazilian Blowout Solution. When applying, use the same dusting technique and work product through the hair with a fine-tooth comb to distribute product evenly.
5. Blow-dry the hair as straight and smooth as possible. You can use either a paddle brush or a round boar bristle brush - whatever your professional preference. For best results, blow-dry the hair with as much tension as possible. When blowdrying, it is always recommended to keep the blow-dryer at least 2 inches away from the hair to minimize the steam released.
6. Flat iron the whole head of hair to seal the product into the hair. You should be using a professional flat iron that reaches 450 degrees. Depending on the condition of the hair, the flat iron temperature should range between 380 to 450 degrees (using lower temperatures for hair that is more damaged). You will take ½ -1½ inch sections, and apply the flat iron from root to end, using the same tension or pressure all the way down the hair shaft, easing off the tension through the ends. Pass over each section of hair at least 4 to 5 times. For a straighter appearance, pass over the hair 7 or more times.
ZERO+ Notes: When you flat iron the hair, you will iron smaller sections than you would with the Brazilian Blowout Original Formula. You will use ¼ -½ inch sections. You should also perform 4-5 additional passes on the hair.
IMPORTANT! FOR ZERO+ ONLY: Once the hair has been completely flat ironed, the treatment is complete. There is no need to rinse the hair and there is no down time. The client may exercise, swim, put hair into a ponytail or clip. It will have no adverse effect on the results.
7. Rinse the solution from the hair with warm water for 1-2 minutes (do not shampoo).
8. Apply Brazilian Blowout Deep Conditioning Masque; leave in for approximately 1 minute, then rinse (do not shampoo).
9. Apply small amount of the Brazilian Blowout Daily Smoothing Serum or Brazilian Blowout Thermal Straightening Balm starting at the ends of the hair and working up.
10. Blow-dry with fingers as desired, or with a flat or round boar bristle brush for the smoothest, sleekest appearance.
This was more informative than my Brazilian Blowout Webinar and Certification 🤔
Thank you for posting this video
WHAT A GREAT VIDEO! THANK YOU!
My hair is short how shoul I style it?
Thank you for all the info. What hair dye should we use moving forward after we have done a Brazilian blowout? Could you please recommend a product?
Oxidizing dyes will shorten the lifespan of the brazilian blowout, any kind of chemical service that opens the hair cuticles will strip off the liquid keratin coating.