You're Right! Actually I thought it just came with it because it makes sense to weigh the bottom down, but it doesn't actually say on the list of products that it's provided. The riser is very nice, solidly built, and very nice looking.
Hi, I am not too sure if I got your question right since I have to translate it to english with google translate. The bow limbs have a 35 pound draw weight. For the arrows I use 30 inch arrows 600 spine and they work well. For effective shooting range for 35 pound bow, it will have no problems shooting over an 18 meter range. It can likely shoot a lot farther but I have only really shot in an indoor area.
Interesting question, so the riser I have is a 17" riser combined with Limbs which would result in a 62" bow. The original string I bought from Merlin Archery were the Bearpaw traditional dacron string for a 62" bow and that worked ok. The issue I had with this string was that it required a LOT of twists to get to the proper bracing height. Untwisted the Bearpaw string sits at around 151 cm tip to tip. I later bought an Ameyxgs archery string from aliexpress that is 149cm length. I found this was a lot better for me because it didn't require as many twists (but at the same time it might not be enough twists but if you go for a higher brace height it should work well) I think the sweet spot would be around 150cm length. Some manufactures go by the bows AMO length. Hope that helps!
You will probably have to look into local areas around you to avoid any shipping fees. For this specific bow I bought it from Merlin Archery www.merlinarchery.co.uk (I have also tried www.alternativess.com and they were pretty good) Hope that helps! (Probably good to mention that I was charged customs fees for both sites though, so that might be something to keep in mind)
You are lucky they gave you a free lower limb pocket 5oz weight. They retail about $25, and its already in the riser. Cool.
You're Right! Actually I thought it just came with it because it makes sense to weigh the bottom down, but it doesn't actually say on the list of products that it's provided. The riser is very nice, solidly built, and very nice looking.
Gostaria de saber qual o alcance da flecha ,gicarei grato pela resposta
Hi, I am not too sure if I got your question right since I have to translate it to english with google translate. The bow limbs have a 35 pound draw weight. For the arrows I use 30 inch arrows 600 spine and they work well. For effective shooting range for 35 pound bow, it will have no problems shooting over an 18 meter range. It can likely shoot a lot farther but I have only really shot in an indoor area.
como eu posso adquiri um arco deci aí
Hi, great video. Can You please tell me how long is the bow string for Samick Discovery bow?
Interesting question, so the riser I have is a 17" riser combined with Limbs which would result in a 62" bow. The original string I bought from Merlin Archery were the Bearpaw traditional dacron string for a 62" bow and that worked ok. The issue I had with this string was that it required a LOT of twists to get to the proper bracing height. Untwisted the Bearpaw string sits at around 151 cm tip to tip. I later bought an Ameyxgs archery string from aliexpress that is 149cm length. I found this was a lot better for me because it didn't require as many twists (but at the same time it might not be enough twists but if you go for a higher brace height it should work well)
I think the sweet spot would be around 150cm length. Some manufactures go by the bows AMO length.
Hope that helps!
@@unsealreveal749 Thank you so much for your answer, it helped me a lot... It is generally recommended, about 1/2 to 3/4 twists per inch.
Olá amigo onde compra-lo
You will probably have to look into local areas around you to avoid any shipping fees. For this specific bow I bought it from Merlin Archery www.merlinarchery.co.uk (I have also tried www.alternativess.com and they were pretty good) Hope that helps! (Probably good to mention that I was charged customs fees for both sites though, so that might be something to keep in mind)
Que precio tiene?
Hi, the price of the riser and the limb together was about $360 USD after customs and fees it was closer to $450
Hamen chahie