UnsealReveal
UnsealReveal
  • Видео 94
  • Просмотров 59 662
Building Necron Warriors
Quick build on some Necon Warriors from the Warhammer 40k Indomitus box set
Просмотров: 16

Видео

Kawasaki King K500, better than plastics?
Просмотров 621 день назад
The Kawasaki King K500 is Kawasaki's hybrid shuttlecock. It is made up of 3 main parts , the feather, the cage and the cork. These are comparable in price to low end shuttles but the durability is quite a bit better, as well, you get a much closer to feather feel than I think plastics will be able to achieve in the near future. Skirt stiffness Plastic (soft), Hybrid (medium), Feather (hard) Wei...
Cryptothrall: Let's Build
Просмотров 12Месяц назад
Building 1 of 2 Cryptothralls from the Warhammer 40k Indomitus box set
Victor Thruster TK-F 隼 Ultra
Просмотров 2,1 тыс.Месяц назад
Taking a quick look at the new Victor Thruster F Ultra. I will update this a few times as I get more play time with the racket. Initial Play (Less than 1 hour): The racket has a similar weight to the Thruster F Enhanced but aside from that they feel very different from one another. The racket is "strange" to say the least. It has the stiffness required for more control (and you can feel the sti...
Canoptek Reanimator: Let's Build
Просмотров 192 месяца назад
Building a Canoptek Reanimator from the Warhammer Indomitus Box
Skorpekh Destroyers & Plasmacyte: Let's Build
Просмотров 492 месяца назад
Building a set of 3 Skorpekh Destoyers and 1 Plasmacyte from the Warhammer Indomitus box set.
Skorpekh Lord: Let's Build
Просмотров 242 месяца назад
Building a Necron Skorpekh Lord from the Warhammer 40k Indomitus Box
Necron Plasmancer: Let's Build
Просмотров 373 месяца назад
Necron Plasmancer: Let's Build
Necron Overlord: Let's Build
Просмотров 743 месяца назад
Necron Overlord: Let's Build
Necron Royal Warden : Let's Build It
Просмотров 253 месяца назад
Necron Royal Warden : Let's Build It
Unboxing Warhammer Indomitus Box (Released 2020)
Просмотров 614 месяца назад
Unboxing Warhammer Indomitus Box (Released 2020)
Infernus Squad: Let's Build It
Просмотров 1024 месяца назад
Infernus Squad: Let's Build It
Unboxing Gillo GT M
Просмотров 1565 месяцев назад
Unboxing Gillo GT M
Unboxing Kindle Paperwhite (11th Gen)
Просмотров 676 месяцев назад
Unboxing Kindle Paperwhite (11th Gen)
Terminator Squad Lets Build It
Просмотров 2446 месяцев назад
Terminator Squad Lets Build It
Sternguard Veteran Squad: Let's Build
Просмотров 1026 месяцев назад
Sternguard Veteran Squad: Let's Build
Apothecary Biologis & Lieutenant in Phobos Armour: Let's Build It
Просмотров 507 месяцев назад
Apothecary Biologis & Lieutenant in Phobos Armour: Let's Build It
Ballistus Dreadnought - Let's Build It
Просмотров 4817 месяцев назад
Ballistus Dreadnought - Let's Build It
Librarian in Terminator Armour - Let's Build It
Просмотров 1447 месяцев назад
Librarian in Terminator Armour - Let's Build It
Captain in Terminator Armour - Let's Build It
Просмотров 557 месяцев назад
Captain in Terminator Armour - Let's Build It
Termagants - Let's Build it
Просмотров 828 месяцев назад
Termagants - Let's Build it
Neurogaunts - Let's Build It
Просмотров 158 месяцев назад
Neurogaunts - Let's Build It
Barbgaunts - Let's Build
Просмотров 98 месяцев назад
Barbgaunts - Let's Build
Von Ryan’s Leapers - Let's Build It
Просмотров 629 месяцев назад
Von Ryan’s Leapers - Let's Build It
The Winged Tyranid Prime - Let's Build It
Просмотров 309 месяцев назад
The Winged Tyranid Prime - Let's Build It
Unboxing Lords of Waterdeep: Scoundrels of Skullport (2013)
Просмотров 369 месяцев назад
Unboxing Lords of Waterdeep: Scoundrels of Skullport (2013)
Unboxing Lords of Waterdeep (2012)
Просмотров 89 месяцев назад
Unboxing Lords of Waterdeep (2012)
Unboxing and Building: Eugy 035 Tasmanian Devil
Просмотров 6010 месяцев назад
Unboxing and Building: Eugy 035 Tasmanian Devil
Unboxing: Oathsworn (Spoilers)
Просмотров 4210 месяцев назад
Unboxing: Oathsworn (Spoilers)
Unboxing: Samick Discovery
Просмотров 12 тыс.11 месяцев назад
Unboxing: Samick Discovery

Комментарии

  • @thefakecat8340
    @thefakecat8340 8 дней назад

    when you hear the click. nice

  • @KarIiah
    @KarIiah 12 дней назад

    I am heavily biased because they're my favourite animals, but I really liked the Tortun Druid! Also this has such heavy (unintentional) ASMR vibes to it, it's really relaxing, plus I get to see some great miniatures :)

    • @unsealreveal749
      @unsealreveal749 12 дней назад

      Glad you liked it! There are some really cool stuff on Esty! But be warned, the resin stuff sometimes breaks during shipping :(

    • @KarIiah
      @KarIiah 11 дней назад

      @@unsealreveal749 Yeah, it can be really fragile. I've only had good experiences so far, though! I had a mini (called Fungal Queen) that I couldn't believe arrived absolutely undamaged - it had so delicate details that I was afraid of even touching them!

  • @rakeshbrahmne2887
    @rakeshbrahmne2887 21 день назад

    Hamen chahie

  • @bonitabromeliads
    @bonitabromeliads Месяц назад

    maybe turn down the treble on your audio mix, it sounds like breaking glass.

    • @unsealreveal749
      @unsealreveal749 Месяц назад

      Thanks for the advice! I am still messing around with the audio and such to try find a good middle ground. and on some time adjusted shots, I'm still not fully certain what is a good way to adjust the audio so it isn't so distorted. I'll keep looking into it :)

  • @michaelbrown2516
    @michaelbrown2516 Месяц назад

    I just got the terminator squad as my first minis,looking at the plastic frames with all the individual pieces was a bit overwhelming and this video actually helped a lot. it actually seems very doable now! thank you!

    • @unsealreveal749
      @unsealreveal749 Месяц назад

      Glad it helped you! I would highly recommend going about it one piece at a time. When I first started I just cut everything out first and BOY was that a mistake. The minis this time are also push fit, if you find they don't fit as well as you like, most seem to recommend cutting out the push fit part and use glue to bond it together for a better fit.

  • @mg.mininogrillo6053
    @mg.mininogrillo6053 Месяц назад

    Olá amigo onde compra-lo

    • @unsealreveal749
      @unsealreveal749 Месяц назад

      You will probably have to look into local areas around you to avoid any shipping fees. For this specific bow I bought it from Merlin Archery www.merlinarchery.co.uk (I have also tried www.alternativess.com and they were pretty good) Hope that helps! (Probably good to mention that I was charged customs fees for both sites though, so that might be something to keep in mind)

  • @brianglenney8642
    @brianglenney8642 2 месяца назад

    What kind of camera and Mike are you using??

    • @unsealreveal749
      @unsealreveal749 2 месяца назад

      Hi! I use a Sony A7 III and a Zoom H4n Pro recorder. The lens itself is a SONY FE PZ 16-35mm and for the mic I am recording directly from the devices mic itself. Hope that helps!

    • @brianglenney8642
      @brianglenney8642 2 месяца назад

      @@unsealreveal749 it might I hope to start streaming some day and so I've begun to ask what people use thank you for responding!!

  • @movie-el9kw
    @movie-el9kw 3 месяца назад

    Ye konsa color h

  • @OhOutlaw
    @OhOutlaw 3 месяца назад

    Satisfying

  • @OliverJovner
    @OliverJovner 3 месяца назад

    Build more necronz!

  • @ryanvarey2603
    @ryanvarey2603 4 месяца назад

    Very nice riser. Thanks for sharing

    • @unsealreveal749
      @unsealreveal749 4 месяца назад

      Thanks for commenting! It is a very nice riser, some cost cuttings vs the Gillo GT but also comes with a slightly lower price tag :)

    • @ryanvarey2603
      @ryanvarey2603 4 месяца назад

      I am keeping an eye out for the same one now. I was so close to buying the one you got lol. The red in you video looks amazing.

  • @miguelangelroquerivas8345
    @miguelangelroquerivas8345 5 месяцев назад

    Que precio tiene?

    • @unsealreveal749
      @unsealreveal749 5 месяцев назад

      Hi, the price of the riser and the limb together was about $360 USD after customs and fees it was closer to $450

  • @crudecod
    @crudecod 5 месяцев назад

    Kindle is Amazon, and Amazon massively supports apartheid. End of story.

  • @Harry-w2v
    @Harry-w2v 6 месяцев назад

    Amazing ty

  • @BloopTheNoop
    @BloopTheNoop 6 месяцев назад

    The crunch 🤩🤩🤩🤩

  • @ambassadorofreee3859
    @ambassadorofreee3859 7 месяцев назад

    Pushfit is cancer

  • @dgw237
    @dgw237 7 месяцев назад

    The only asmr worth listening to

  • @kroger1910
    @kroger1910 7 месяцев назад

    This is weirdly therapeutic…

  • @krazyKenHo
    @krazyKenHo 7 месяцев назад

    ❤❤❤❤❤❤❤❤❤❤❤

  • @L3GHO5T
    @L3GHO5T 7 месяцев назад

    You’re mad man assembling a model after cutting all the pieces out!!

  • @hoskhatibi
    @hoskhatibi 7 месяцев назад

    i like the popping sounds

    • @unsealreveal749
      @unsealreveal749 7 месяцев назад

      Glad you liked the sounds from the video :)

  • @POPOPOPOPOPOP82
    @POPOPOPOPOPOP82 7 месяцев назад

    Your video speed down too much from the more fast paced start

    • @unsealreveal749
      @unsealreveal749 7 месяцев назад

      Noted! Thanks for the comment, I'll definitely keep that in mind on my next short!

  • @alenwake3445
    @alenwake3445 7 месяцев назад

    The sound of its assembly is so comforting!

  • @chaomatic5328
    @chaomatic5328 8 месяцев назад

    Need some #40k here!

    • @unsealreveal749
      @unsealreveal749 7 месяцев назад

      Will definitely include that Tag going forward!

  • @ivicacajavec
    @ivicacajavec 8 месяцев назад

    Hi, great video. Can You please tell me how long is the bow string for Samick Discovery bow?

    • @unsealreveal749
      @unsealreveal749 8 месяцев назад

      Interesting question, so the riser I have is a 17" riser combined with Limbs which would result in a 62" bow. The original string I bought from Merlin Archery were the Bearpaw traditional dacron string for a 62" bow and that worked ok. The issue I had with this string was that it required a LOT of twists to get to the proper bracing height. Untwisted the Bearpaw string sits at around 151 cm tip to tip. I later bought an Ameyxgs archery string from aliexpress that is 149cm length. I found this was a lot better for me because it didn't require as many twists (but at the same time it might not be enough twists but if you go for a higher brace height it should work well) I think the sweet spot would be around 150cm length. Some manufactures go by the bows AMO length. Hope that helps!

    • @ivicacajavec
      @ivicacajavec 8 месяцев назад

      @@unsealreveal749 Thank you so much for your answer, it helped me a lot... It is generally recommended, about 1/2 to 3/4 twists per inch.

  • @DMDuncan37
    @DMDuncan37 11 месяцев назад

    How did you do ? 13 min of show without a lot explications.

    • @unsealreveal749
      @unsealreveal749 11 месяцев назад

      Hi, did you mean the magnetization? I used the original Gorilla Glue (yellow) and a mix of 5mm diameter by 2mm thick magnets and 3mm X 2mm magnets. The larger magnets were used for the larger arms and the smaller magnets were used for the lighter arms. (I would suggest even larger magnets since the wings are very heavy, and for the glue I would suggest a super glue that doesn't expand like the Gorilla Glue Blue, I was having a lot of issues because of the expanding glue). I used a drill bit that had the same diameter to drill out the holes to fit the magnet into (go nice and slow so you don't end up making the holes too deep.) Hopefully that helps :)

  • @dkveracity65able
    @dkveracity65able 11 месяцев назад

    You are lucky they gave you a free lower limb pocket 5oz weight. They retail about $25, and its already in the riser. Cool.

    • @unsealreveal749
      @unsealreveal749 11 месяцев назад

      You're Right! Actually I thought it just came with it because it makes sense to weigh the bottom down, but it doesn't actually say on the list of products that it's provided. The riser is very nice, solidly built, and very nice looking.

  • @blob642
    @blob642 Год назад

    Cool video man! I changed my profile, but im the same dude that keeps commenting on your videos. I can suggest doing knife unboxings or just things related to weapons (Like this one). I know people like knives, but of course, still post warhammer videos. Keep on going man! Almost 40 subscribers!

    • @unsealreveal749
      @unsealreveal749 Год назад

      Thanks! So far, just a random assortment of items, still messing around to see what works best visually and audio wise :)

  • @blob642
    @blob642 Год назад

    Yooo! This model is so cool! Cant wait to get the Leviathan box! Keep up the great work!

    • @unsealreveal749
      @unsealreveal749 Год назад

      Thanks! Actually the newer models (or push fit) are pretty nice and I completely agree, this model looks amazing!

  • @fuzzhead941
    @fuzzhead941 Год назад

    Love the content keep it up :D

  • @blob642
    @blob642 Год назад

    seems like a fun lil game!

    • @unsealreveal749
      @unsealreveal749 Год назад

      It's an amazingly simple and quick game, actually perfect pick up and teach a small group to pass a bit of time :)

  • @blob642
    @blob642 Год назад

    Hey dude! I wanted to check-up on your channel again and 23 subs?! Nice man! I want to get the Leviathan box too,but i have a lot of miniatures to paint.... Keep it up and you will get 100 subs by the end of the year i think

    • @unsealreveal749
      @unsealreveal749 Год назад

      haha, thanks for checking up on me once in a while! As for the leviathan box, I just couldn't resist ;).

    • @blob642
      @blob642 Год назад

      I want to get the leviathan box so much, but i want to finish painting my minis...And i have a lot of minis. Cant wait to get it tho and thanks for showing me whats inside!

  • @Stealyourmemes_studios
    @Stealyourmemes_studios Год назад

    That thing snapped together faster then some people’s father leaving them

  • @blob642
    @blob642 Год назад

    you even got over 1000 views!Good job man!

  • @blob642
    @blob642 Год назад

    I wanted to check on this channel again and i saw 18 subs.Nice!Keep it up!

  • @The_Goofy_Studio
    @The_Goofy_Studio Год назад

    Can never have too many 'gants! =) Good luck in your games.

  • @NidioQuizela
    @NidioQuizela Год назад

    Cool🎉

  • @sumaiya_kitchen
    @sumaiya_kitchen Год назад

    Super

  • @শান্তামনি-ধ৬চ

    nice 👌👌👌

  • @johnpaultaopo4632
    @johnpaultaopo4632 Год назад

    Wht made is this?

    • @unsealreveal749
      @unsealreveal749 Год назад

      Hello, this is a badminton racquet made by Victor Sports (victorsport.com). The racquet is a Victor Thruster F Enhanced.

  • @blob642
    @blob642 Год назад

    THAT TRANSITION IS TOO SMOOTH

  • @blob642
    @blob642 Год назад

    I was painting them right now(I play adeptus mechanicus)They are a really cool and fun to build and paint them You can also kitbash them.I like the skitarii with the hoods more that the ones without. Keep it up:D

    • @blob642
      @blob642 Год назад

      if you will paint them i would LOVE to see them!

    • @unsealreveal749
      @unsealreveal749 Год назад

      I want to paint them, but I've seen too many images of nicely painted models with nice plasma glow. So it's really stretching out the process :P

    • @blob642
      @blob642 Год назад

      The first time i painted them the plasma coils were so bad but slowly i evolved

  • @muhammadrazusarder3701
    @muhammadrazusarder3701 Год назад

    How i can buy it

    • @unsealreveal749
      @unsealreveal749 Год назад

      Hello, you would have to reach out to your own local badminton store or one that ships to your location. An example is Yumo.ca

    • @muhammadrazusarder3701
      @muhammadrazusarder3701 Год назад

      @@unsealreveal749 Original bat not available in my area. I want the original bat. How to get?

    • @unsealreveal749
      @unsealreveal749 Год назад

      Hmm, I'm not too sure then, sometimes what you can do is have it shipped in from another seller from outside of your country. Or if you have forums where people come together and discuss badminton, sometimes there are parts of the forum where there might be people selling/buying badminton racquets. Hope you the best of luck in finding it!

  • @blob642
    @blob642 Год назад

    WHOOOAH they look like robot demons and thats enough for me to buy them I didnt look at them on gamesworkshop because i was to busy watching space marine models Also congrats 7 subscribers:D

    • @unsealreveal749
      @unsealreveal749 Год назад

      Haha, thanks! They were a joy to build. The largest issue I had was the stand they went on because it was such a small connection. But then again that might be because I am using Tamiya Extra Thin Cement rather than the normal glue.

  • @hoskhatibi
    @hoskhatibi Год назад

    cool stuff

  • @blob642
    @blob642 Год назад

    i wanna buy these models:D

    • @unsealreveal749
      @unsealreveal749 Год назад

      They are actually really nice, the last few that I've built from the Omnissiah's Talon box were a little more fragile, but these guys are nicely posed and sturdy.

  • @blob642
    @blob642 Год назад

    cool gadget also 3 SUBSCRIBERS woohoo i bet you will get to 100 in a few weeks

    • @blob642
      @blob642 Год назад

      and im not sarcastic

    • @unsealreveal749
      @unsealreveal749 Год назад

      Hahahah, thanks! It's a hand warmer, pretty useful especially because it splits apart and each can actually be used like a backup battery. I use it to charge my camera battery sometimes :)

    • @blob642
      @blob642 Год назад

      @@unsealreveal749 lol

    • @blob642
      @blob642 Год назад

      ill give you a tip:if you want more subscribers post on youtube shorts its a good start to a channel

    • @unsealreveal749
      @unsealreveal749 Год назад

      Honestly, no idea how to do shorts yet, but I'll take a look into it :) Thanks for the advice

  • @blob642
    @blob642 Год назад

    WOOOAH THOSE ARE SOME COOL MODELS!!! I think i will buy some too:D Also i think you will enjoy building kastelan robots.I have them and i had a blast building them(im just a warhammer nerd) Keep it up:D Also the music is very nice and i like it a lot

    • @unsealreveal749
      @unsealreveal749 Год назад

      Thanks! I just only recently got into Warhammer and it was actually hard trying to decide between the infiltrators and the ruststalkers. These models were definitely dynamically posed out of the box which was very nice.

    • @blob642
      @blob642 Год назад

      @@unsealreveal749 The infiltrators are cool but if you dont want to play warhammer i think some cooler models are the reivers. Im waiting for some models and i will tell you about which models i enjoyed building:D

    • @unsealreveal749
      @unsealreveal749 Год назад

      Definitely want to try playing some Warhammer in the future, the idea of building an army that fits your play style seems like a lot of fun, just need to eventually reel in my friends into trying it :)

    • @blob642
      @blob642 Год назад

      @@unsealreveal749 im having a really hard time finding someone that likes to play warhammer because my friends dont really like it

    • @unsealreveal749
      @unsealreveal749 Год назад

      Ya, board games are pretty easy to get into but warhammer requires time to paint your models (to make them stand out) then there is the complex part of all the rules from what it seems. If i'm going to hook any of my friends it it will probably have to be very low point games ;)

  • @blob642
    @blob642 Год назад

    i like the miniatures a lot:D

    • @unsealreveal749
      @unsealreveal749 Год назад

      They came out very detailed, it's my first time ordering from Etsy and I'm glad they came out as detailed as they were given the size.

  • @keepmyheat
    @keepmyheat Год назад

    hi, why is the top part of the handle grey plastic, all reviews i seen, the top part of handle is metal

    • @unsealreveal749
      @unsealreveal749 Год назад

      Hi, I'm actually not too sure myself, I think most likely they started using the clear cap and handle to show off the free core technology used in the handle of the Thruster F Enhanced.

    • @rheejin9987
      @rheejin9987 Год назад

      Thruster F enhanced has several versions. This is one of the earliest versions made in China(clear top+clear bottom). The earliest version that's made in Taiwan has a blue bottom cap.