Products recommended in this video: REWA Selected iPhone Screen Assembly: bit.ly/3w1jd8U Display And Touch Multi-function Tester: bit.ly/3fkxHdV For more discount, you can contact our wholesale team: shop.rewa.tech/wholesale.html
for the display message, if you turn on your iphone(to test) with the aftermarket screen before you program or transfer the chip, and your phone is connected to the internet and has enough time to update apples servers with the aftermarket screen info, then the message is stuck there from my experience. I've made sure the wifi is off and sim card is out before I teardown the phone and seems to be working so far.
so all u have to do to avoid the display message is by programming the serial number from the old screen(just like true tone) before connecting the phone to the internet to update its information?
@@garywilbert4519 Or transfer the bga chip. In which case I'd recommend you talk to your supplyer about getting screens with no new or dummy chip on them, just blank pads. If you use heat pad fist and then 138°C lowmelt and shield the display well when soldering the original chip on, then removing the new / dummy chip from the new display is by far the most risky part. If you can avoid this step completely by getting new screen with no chip, just blank pads, that minimizes the risk. The smallest risk is of course programming.
I’m here for getting more information about what the hell did they put in my IPhone 12 for 200 € . Noticed True Tone not copied, mentioned them, they told me next month they will have a new equipment. After one day I noticed that when scrolling or flip from one app to another it shadowing and letters are flooding with red mark. Now I have a poor display, no True Tone, claimed for another type as repair service guaranteed me to install a good quality oled. I’m near to 😭why I didn’t did on my own. My original display works, but don’t response to touch. Can be repaired ?
I’ve got my iPhone X screen replaced. It appears to be OLED. There are two problems: 1. There are ghost touches only when the brightness is full. 2. 3D Touch doesn’t work in Lock Screen (the camera and flashlight) but works on the Home Screen. I have removed Face ID and ambient light sensors as they got Damaged when trying to move them to a new flex cable. Could that be causing the problem? What else could cause the problem?
I believe one factory I know that doesn't show the display message for the iphone 11 LCD is the "ZY" you can install the screen and no message would pop up. Also if there was a case that the message popped up with the ZY screen it will go away after doing a factory reset.
@@phrg8332 it depends. for people whose eyes are sensitive, OLED’s PWM Dimming is completely unacceptable. Under this case, if you want the performance+a healthier display, swapping the original oled with an after-market DC-Dimming LCD is the only solution.
How to check if ur iphone screen is original apple oled display.. it has to pass this test. Download pure black wallpaper and go to gallery and open it… and turn the brightness all the way up if the display seems like it’s not even on at all that means u got a genuine Apple display:)
no lol. this video literally explained how you can buy aftermarket oled screens. only way to tell the difference is by opening it up if its done by a repair shop that can reprogam truetone. or if you dont have truetone. thats an easy indicator
Products recommended in this video:
REWA Selected iPhone Screen Assembly: bit.ly/3w1jd8U
Display And Touch Multi-function Tester: bit.ly/3fkxHdV
For more discount, you can contact our wholesale team: shop.rewa.tech/wholesale.html
How can I order original glass change screen..?
E so.
"Practice Makes Perfect"
Your comparison video is to the point... No blah blah blah! 👍👍👍
Love your videos. Can you please do upgrading storage and ram in new m1 MacBook?
for the display message, if you turn on your iphone(to test) with the aftermarket screen before you program or transfer the chip, and your phone is connected to the internet and has enough time to update apples servers with the aftermarket screen info, then the message is stuck there from my experience. I've made sure the wifi is off and sim card is out before I teardown the phone and seems to be working so far.
so all u have to do to avoid the display message is by programming the serial number from the old screen(just like true tone) before connecting the phone to the internet to update its information?
@@garywilbert4519 Or transfer the bga chip. In which case I'd recommend you talk to your supplyer about getting screens with no new or dummy chip on them, just blank pads. If you use heat pad fist and then 138°C lowmelt and shield the display well when soldering the original chip on, then removing the new / dummy chip from the new display is by far the most risky part. If you can avoid this step completely by getting new screen with no chip, just blank pads, that minimizes the risk.
The smallest risk is of course programming.
@@pr0xZen yeah the chip can be transferred only if its an oem replacement screen or have same connecting pads as that of the original ic
Your videos deserve LIKE sir!
REWA you are AMAZING
Just ordered the Soft one! Let’s see how it looks.
Did you like it?
@@nicollara2663 Yeah! Works great👌
Did you get the pop up message?
Thanks Rewa Technology for your usefull video!
Why Incell panel have air gap inside?
Where can I buy the 3-way display testers as seen in this video?!
Amazing stuff. Incredible
Great Demonstration 👍👍👍
Hello sir
Soft oled display ka Kya price hoga
Please reply sir
Do you have courses that i can do in Romania for repairing iphones?
at 6:34 g+g screen image looks beautiful..
no lmao. g+g js extremely low quality
Was the aftermarket soft oled display used in this video from JK?
Do these screens still support HDR and Dolby Vision?
Where could I get that display base from!
Love this video 🤩👏👏
How about Refresh rate ?
Why would that incell be better since the sensor is deeper in the screen? Shouldn’t it be the other way around
Good job❣️ !!
Which is best one...
Wholesome!
You have Glass for HARD oled? Not screen. I need Glass!
Yes, we have glass in REWA shop. Click here: shop.rewa.tech/list/glass-lens
@@rewatechnology2008 I need glas for HARD OLED! Not original!
Bro can you change Glass at home or you need machine for that? My screen is working but Glass is broken
I admire guy who is voice this video
Its a computer program, not real voice.
I’m here for getting more information about what the hell did they put in my IPhone 12 for 200 € . Noticed True Tone not copied, mentioned them, they told me next month they will have a new equipment. After one day I noticed that when scrolling or flip from one app to another it shadowing and letters are flooding with red mark. Now I have a poor display, no True Tone, claimed for another type as repair service guaranteed me to install a good quality oled. I’m near to 😭why I didn’t did on my own. My original display works, but don’t response to touch. Can be repaired ?
استمر بالعطاء محتوى قيم
Nice video brother.
which one has best touch
My screen is much less sensitive to touch no. It sometimes ignore some touches and hard to game.
Which screen soft oked?
superb 😍
Thank u for the video 👍👍👍
nice video, thanks
Thanks
Thank you so much
excellent 👌
I’ve got my iPhone X screen replaced. It appears to be OLED. There are two problems:
1. There are ghost touches only when the brightness is full.
2. 3D Touch doesn’t work in Lock Screen (the camera and flashlight) but works on the Home Screen.
I have removed Face ID and ambient light sensors as they got Damaged when trying to move them to a new flex cable. Could that be causing the problem?
What else could cause the problem?
water ..
Nice ideas
Teach how to soldar AirPods charge pin pls 😭😭
Nice video
I believe one factory I know that doesn't show the display message for the iphone 11 LCD is the "ZY" you can install the screen and no message would pop up. Also if there was a case that the message popped up with the ZY screen it will go away after doing a factory reset.
Have you tried the GX? Does it have the pop up message?
Hi There,
thanks for your useful video. I
am wondering do you sell the Display base to test 3 screens in same time?
if yes
How much?
regards
Nice
putting an LCD panel to a mobile which was designed for OLED is a great way to fry the motherboard
Not really. The LCD will be built to compensate for the power difference.
@@sheep1903 ok. just think about it. OLED panel consumption and LCD + back light consumption. what do you think which one is higher?
@@gergelysoki1705 you're correct
it’s not going to fry anything. the lcd screens are specifically made for the iphone they’re going in. it will be a much worse experience though
@@phrg8332 it depends. for people whose eyes are sensitive, OLED’s PWM Dimming is completely unacceptable. Under this case, if you want the performance+a healthier display, swapping the original oled with an after-market DC-Dimming LCD is the only solution.
Hell ..... watching AD for almost 10.20 minutes of REWA😂😂😂😂 lol
Seriously, i had a hard time believing the seriousness of your vid... you know, since you uploaded it on the first of April..
IPhone 12 which one take 😳 My original is unresponsive, I want the best as I don’t care money. Quality over quantity
Nice April 1st joke. Very funny.
Your finger test for screen sensitivity made no sense.
High Pro
Boss!
❤️
How to check if ur iphone screen is original apple oled display.. it has to pass this test.
Download pure black wallpaper and go to gallery and open it… and turn the brightness all the way up if the display seems like it’s not even on at all that means u got a genuine Apple display:)
no lol. this video literally explained how you can buy aftermarket oled screens. only way to tell the difference is by opening it up if its done by a repair shop that can reprogam truetone. or if you dont have truetone. thats an easy indicator
где русские?
Binod😁