Using HEVC/AAC (high efficiency video coding) is better than AVC/AAC (advanced video coding) since it's better encoding technology to MP4 format (final product is the same but encoding math is better)(I had some shenanigans about H.264 and 265 here deleted since I'm not entirely sure about them). Also utilizing your Nvidia graphics card via NV Encoder is better overall since it offloads lots of work to built-in chip called an ASIC that was made for it. Overall GPU usage may seem low (around 8 to 15%) but it's because ASIC is not shown in task manager graphs. This encoding method not just fastens rendering speed but helps your device stay cooler. Other 2 encoding methods use CPU only which is slower and may give your processor a little fever. Also be sure to set your GPU settings in your application preferences (older vegas versions also need checking "allow legacy GPU rendering" in general tab, even older versions used to have this option inside INTERNAL tab which is brought up using shift + click preferences and setting that option to TRUE). Hope this helps. :)
FPS selection contains preset options but there is nothing stopping you from clicking the box and set it yourself manually. The bit rate is tricky as it goes hand to hand with resolution. This makes the overall sharpness of the video but some people can see pixellation at lower rates and some don't.
The HEVC is rendering a lot slower than AVC. It's going to take over 20 minutes to render a 22 second clip. Is this normal? It's not using my graphics card (AMD), so... I'll let it render it out just so I can compare quality, but it now says it will take 30 minutes to finish rendering. I definitely won't be using HEVC again.
I was talking of how to put a video on 1080p 60fps before you upload the video. Literally i was looking for this and then 4 minutes later you upload this lol Good Video!:)
I don't usually comment after watching a tutorial but thank you so much for being simple and even showing the results at the end. You should upload more.
My video game out VERY dark the first time, but I changed a value in properties from full range to video levels and it was perfect. Thank you so much for this!
my video become darker too when i upload it to youtube, can you tell me how to change the value? i've read your comment but i've got a little confuse to find properties
@@eatnender9119 I think it was Pixel Format. It's been a while since I've tinkered with the settings because I have everything set up as I like it. I hope that helps! Also bare in mind that not all youtube videos share the same codex, so be wary of that. Preview the video after rendering it, then view it on youtube as well to see if it's the render or the encoding.
@@BlightVonDrake thanks for the reply by the way, i already change the pixel format from 8 bit to 32 bit (video levels) but my video still looks darker 🤔
@@thiagoo.8084 yea i switched to rendering in the 60fps place instead of the 25fps and it worked but when uploading it to youtube the quality goes so bad
Hey i wanted to know if there's an option to make 2 videos that's side by side sync together at the same time, when i do it one video always start 1 second faster or slower. Can i make them sync together to show the same thing at the same time?
Yeh import one clip, create a new layer and import the other one. If you got audio layers you can look at that for the same waves of sound if not then mute top track and see where the video frame is. Youll need to cut the video a bit to sync them together and move either top or bottom one left or right to match them together
@@VerticDesigns When you say create a new layer do you mean Duplicate Track. You mean to create the same video i have already or no. Can you make a video on how to do it if you if you know how, it's confusing on Sony Vegas Pro 16. They are the same videos but on 2 different phones. I don't use the audio in the video because i always mute them. I use other none copyright music for camera test
when i try to put in 60 fps in render settings, it goes back to 23 fps. And when i upload a video to youtube in 59p it goes down to 29 p when it is uploading. Help?
VerticDesigns thx and also, when I want to upload in 1440p I put in 2560x1440 and when it is uploaded it just stays at 1080p and never lets me go to the option for 1440p. Do I have to use the main concept encoder for that to work?
VerticDesigns also when I’m done rendering at 59p and then I upload to RUclips on my preview it always goes down to 29.7p when it is uploading and when RUclips renders it it goes back up to 59.7p is that normal?
@@skrr3036 it's a bit weird with formats higher, when you just upload, 720p and 1080p will come through but anything higher takes more time same as frame rate you'll have 30fps before 60fps but if you rendered at 59 or 60 it should still be 60fps. I'd just keep testing it and see what works or even come back to the video a day after it might just be the website hasn't fully uploaded it
@@VerticDesigns i have been but it just stays at 1080p and my video is not as good as a 1080p60 video. How can i set it to where when i am done rendering at 60fps, when i upload it my preview stays at 60p and does not go down to 30p?
@@VerticDesigns I used to use Vegas 13 and this never happened. Recently bought and upgraded to 16 and everything seems to be fine except this. I just don't see the Customize Template. I was wondering if anyone else had this issue or can help, can't find anything
I HOPE YOU CAN HELP ME. im going crazy because of the blue loop selection thing popping up on the timeline all the time. i wanna delete it completely its so useless and annoying, im gonna go crazy
Try creating a loop region and tick the "render loop region only" or pre render your project (save it, open new, then *File > Import >《 your project 》> then drag into timeline*
how do you edit the duration of a transition? id like to add a fade through black at the start of my video but its too long. How can i edit it so the transition is shorter?9
You just drag the fade in line closer to the start so it's shorter, same goes for any transitions you just make the gap small and that will play quicker
@@VerticDesigns thats what I thought too.. but when I tried dragging it, it wouldn't let me and would just either click the transition or drag the clip
hey can you tell me your bitrate in your recording software? like the average and max? I have tried so many different formats and bitrates and no matter what I use my game play videos look like shit on RUclips. Could it possibly be because of my OBS recording settings? i recorded at 40,000 kbps and max 60,000 kbps, max quality and profile on high. Can you please give me any advice? Thank you
I use CQP instead for my bitrate and the quality is much better. I've got a video on my channel with my settings 👉 ruclips.net/video/_QVH0S8EcHE/видео.html
Thank you I have Vegapro Vegapro17 What render do I use for 720x453 to get the best quality with the least about on memory or data to use This is for WhatsApp It seems the Vegapro people only look after the large videos and forget the small video 8min is currently 31MB but that is too large and still pixellated I use a Samsung phone to record but if I use Vegapro it ends up disastrous and people complain Can you help, please I have been experimenting for a year now and my Vegapro videos look disappointing Can you please help P:)
It's vegas pro itself, sometimes it freeze when it hits a certain frame in the video or a certain effect it struggles to process. You could either pre-render your project by saving it, starting now one and then going to file > Import > load the project > then drag into the timeline or just try render your video but just cut a bit of the end of your video to test see if it's that part its stuck on
@@VerticDesigns thank you, but do you know the difference? like if i do 30fps on settings but the video is at 25fps will the re sample of frames damage the quality?
Can the camera go up to 30 or a higher frame rate? id just keep testing it to find the best settings for your videos. Even upload one at 25 and see what results
Which mode are you using? if it's intel or nvidia they have certain frame rates so for example they use 59 fps rather than 60. Just make sure it's Mainconcent
Год назад
@@VerticDesigns same problem here, and i made sure it's mainconcent but the problem is still there
I chekced Nvidia coding option is much faster than normal, first on list. Like With CPU at 2 % time left 45 minutes and still raise, with Nvidia at 2% time left 10 minutes. I suppose nvidia option is 4x faster.
But why the hell this rendering takes too much long time? From 20 minutes video renders around 1.5 hours.... This is ridiculously. It's very disgusting😑
@@Trezn were you running other programs in the background or overloading your system? Normally this is down to your system or try a different video player see if it's same results
![*BEST* Render Settings for Gaming Videos! (Vegas Pro 16) [Updated November 2020]](http://i.ytimg.com/vi/AKmj73jgdqo/mqdefault.jpg)
![BEST Render Settings for Vegas Pro 17/16/15! [Gaming] [Vegas Pro Tutorial!]](http://i.ytimg.com/vi/1LEnG36RYSY/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
The game lagged while i was recording.. also this game is GRID 2 for anyone wondering
Do you play a lot of grid 2?
What's your favourite driving/racing game?
@@RadoHudran ive played some and I like need for speed and forza
@@RadoHudran in my i cant mark the option of the debloking filter
Using HEVC/AAC (high efficiency video coding) is better than AVC/AAC (advanced video coding) since it's better encoding technology to MP4 format (final product is the same but encoding math is better)(I had some shenanigans about H.264 and 265 here deleted since I'm not entirely sure about them). Also utilizing your Nvidia graphics card via NV Encoder is better overall since it offloads lots of work to built-in chip called an ASIC that was made for it. Overall GPU usage may seem low (around 8 to 15%) but it's because ASIC is not shown in task manager graphs. This encoding method not just fastens rendering speed but helps your device stay cooler. Other 2 encoding methods use CPU only which is slower and may give your processor a little fever. Also be sure to set your GPU settings in your application preferences (older vegas versions also need checking "allow legacy GPU rendering" in general tab, even older versions used to have this option inside INTERNAL tab which is brought up using shift + click preferences and setting that option to TRUE). Hope this helps. :)
Good tip this will help out others and thanks for sharing. I didn't know h.265 has come out but im glad sony vegas has updated the formats
what about bitrate?
I can't set the fps 60fps when I choose HEVC/AAC...
FPS selection contains preset options but there is nothing stopping you from clicking the box and set it yourself manually.
The bit rate is tricky as it goes hand to hand with resolution. This makes the overall sharpness of the video but some people can see pixellation at lower rates and some don't.
The HEVC is rendering a lot slower than AVC. It's going to take over 20 minutes to render a 22 second clip. Is this normal? It's not using my graphics card (AMD), so...
I'll let it render it out just so I can compare quality, but it now says it will take 30 minutes to finish rendering. I definitely won't be using HEVC again.
Start : * Tutorial *
End : * Playing a game *
Xd
yep haha dont want to bore the viewers to death with a 20 min tutorial on settings that take 5 min
@@alejandroyehuda3252 not interested, thanks
@@w4rb4sh calm down asshole lmao
I was talking of how to put a video on 1080p 60fps before you upload the video. Literally i was looking for this and then 4 minutes later you upload this lol
Good Video!:)
Perfect timing then aha
If you use 1440p60 you got the VP9 codec that's enables higher quality to your video so you should use it... :) :3
I don't usually comment after watching a tutorial but thank you so much for being simple and even showing the results at the end.
You should upload more.
My video game out VERY dark the first time, but I changed a value in properties from full range to video levels and it was perfect. Thank you so much for this!
No problem
my video become darker too when i upload it to youtube, can you tell me how to change the value? i've read your comment but i've got a little confuse to find properties
@@eatnender9119 I think it was Pixel Format. It's been a while since I've tinkered with the settings because I have everything set up as I like it. I hope that helps!
Also bare in mind that not all youtube videos share the same codex, so be wary of that. Preview the video after rendering it, then view it on youtube as well to see if it's the render or the encoding.
@@BlightVonDrake thanks for the reply by the way, i already change the pixel format from 8 bit to 32 bit (video levels) but my video still looks darker 🤔
@@eatnender9119 Ah. I'm sorry to hear. I wish I could help out more. I hope you get it fixed.
Rendered my whole life w/avc regular this improves the quality +rep
MagiX sucks, when i have a very dark image on my video it shows it super dark. I even tried the bit thingy in project settings. Nothing helped.
When i tap 60fps it just changes back to 12(half film) everytime
me too
@@thiagoo.8084 yea i switched to rendering in the 60fps place instead of the 25fps and it worked but when uploading it to youtube the quality goes so bad
@NicoNeth to what?
Thanks! I was really frustrated because 59fps setting was the best option I had, until I watched this vid.
Ahah yeh I was the same when I heard it happen in vegas 15 but I'm so glad there's more options
hi...I just wanna know whats better sony avc/aac or avc/mvc? and what are the differences?
Why im put motion blur and render very long???
This normal ?? Sorry im first time edit in sony vegas
I mean motion blur will add extra frames so i can see why it takes longer
No bullshit, just straight good stuff. Thnaks man
Yup! best way :)
I'm also confused. Why did you choose the old renderer over Intel and Nvidia?
FYI: If you have multiple clips, just select every video clip, switches, disable resample.
Good tip and yup that's a way to do it
Hey i wanted to know if there's an option to make 2 videos that's side by side sync together at the same time, when i do it one video always start 1 second faster or slower. Can i make them sync together to show the same thing at the same time?
Yeh import one clip, create a new layer and import the other one. If you got audio layers you can look at that for the same waves of sound if not then mute top track and see where the video frame is. Youll need to cut the video a bit to sync them together and move either top or bottom one left or right to match them together
@@VerticDesigns When you say create a new layer do you mean Duplicate Track. You mean to create the same video i have already or no. Can you make a video on how to do it if you if you know how, it's confusing on Sony Vegas Pro 16. They are the same videos but on 2 different phones. I don't use the audio in the video because i always mute them. I use other none copyright music for camera test
@@Tech1Tv alright i will if it makes it easier
Hi, when I render it renders the looped area twice. What could the problem be?
when i try to put in 60 fps in render settings, it goes back to 23 fps. And when i upload a video to youtube in 59p it goes down to 29 p when it is uploading. Help?
Change the encoder to "mainconcept" intel and nvdia don't let you choose 60 it happens to me too
VerticDesigns thx and also, when I want to upload in 1440p I put in 2560x1440 and when it is uploaded it just stays at 1080p and never lets me go to the option for 1440p. Do I have to use the main concept encoder for that to work?
VerticDesigns also when I’m done rendering at 59p and then I upload to RUclips on my preview it always goes down to 29.7p when it is uploading and when RUclips renders it it goes back up to 59.7p is that normal?
@@skrr3036 it's a bit weird with formats higher, when you just upload, 720p and 1080p will come through but anything higher takes more time same as frame rate you'll have 30fps before 60fps but if you rendered at 59 or 60 it should still be 60fps. I'd just keep testing it and see what works or even come back to the video a day after it might just be the website hasn't fully uploaded it
@@VerticDesigns i have been but it just stays at 1080p and my video is not as good as a 1080p60 video. How can i set it to where when i am done rendering at 60fps, when i upload it my preview stays at 60p and does not go down to 30p?
How come I cant customize my template for the render settings?
that's strange it should let you edit it, try running vegas as admin or just make sure you click customize template
@@VerticDesigns I used to use Vegas 13 and this never happened. Recently bought and upgraded to 16 and everything seems to be fine except this. I just don't see the Customize Template. I was wondering if anyone else had this issue or can help, can't find anything
These are the best no doubt. Thank you!!
Thanks for such a stream lined video!
No problem :D
Well in my case the rendered video looks nice but when I upload it in youtube it looks bad
every youtube video starts with low quality. give it 15 min to prosses the quality and you you'll find your video with the real video quality
KillwoR GMR no its cause vp09 but i get avc codec so its bad ...u need atleast 1440p for vp09
underrated video! Thank you
I HOPE YOU CAN HELP ME. im going crazy because of the blue loop selection thing popping up on the timeline all the time. i wanna delete it completely its so useless and annoying, im gonna go crazy
Hey everytime i put effects on eliminations it freezes on the end of the clip 😔 Any solution ? I actually put disable resample
Try creating a loop region and tick the "render loop region only" or pre render your project (save it, open new, then *File > Import >《 your project 》> then drag into timeline*
your my best youtuber
Thanks! Means a lot :)
Appreciate the guidance, bro ;D
No problem 👍
whats the best bit rate for videos that arent on youtube? like, i want to have high quality 1080p videos that people will download
thnak you man so diifucult to find these videos
Awesome pal!!!!!!!!
how do you edit the duration of a transition? id like to add a fade through black at the start of my video but its too long. How can i edit it so the transition is shorter?9
You just drag the fade in line closer to the start so it's shorter, same goes for any transitions you just make the gap small and that will play quicker
@@VerticDesigns thats what I thought too.. but when I tried dragging it, it wouldn't let me and would just either click the transition or drag the clip
@@YukiKumerai ahh right i see so you've applied a transition my bad haha then just move second clip further out
@@VerticDesigns ill try that :) it's at the very start of a single clip as like an "intro" transition so hopefully it still works.
Thank You
Ayye that's great
when the render is complete the whole file is like 24 byte
like the estimated file size was 3 gb
Bro when I render as already still can't get quality 4k it still the original quality video I'm recording with my laptop
Thanks for this! :) My videos have been looking a little blurry so this helps. :)
hey can you tell me your bitrate in your recording software? like the average and max? I have tried so many different formats and bitrates and no matter what I use my game play videos look like shit on RUclips. Could it possibly be because of my OBS recording settings? i recorded at 40,000 kbps and max 60,000 kbps, max quality and profile on high. Can you please give me any advice? Thank you
I use CQP instead for my bitrate and the quality is much better. I've got a video on my channel with my settings 👉 ruclips.net/video/_QVH0S8EcHE/видео.html
for some reason i'm locked into constant bit rate and cant select variable bit rate.
That's strange did you select intel instead of mainconcept?
Thank you, you are big help.
ty u so much bro
Np
Thanks man! :)
Thank you
I have Vegapro Vegapro17
What render do I use for 720x453 to get the best quality with the least about on memory or data to use
This is for WhatsApp
It seems the Vegapro people only look after the large videos and forget the small video
8min is currently 31MB but that is too large and still pixellated
I use a Samsung phone to record but if I use Vegapro it ends up disastrous and people complain
Can you help, please
I have been experimenting for a year now and my Vegapro videos look disappointing
Can you please help
P:)
Thank you thank you thank you
No worries
when i render in 60fps 1080p it lags at end of clips it was not doing it before pls help
me too
Nice Video
That's a really cool animated logo I like it :D
@@VerticDesigns Thanks
can u do for render sony vegas pro for Instagram
Which software do you use to compress video.
Sony vegas will do that part with the render settings lower quality = more compression
@@VerticDesigns can you please make another video on that.
@@shubhamsonkusale4509 yeh I will do
My rendering freezes at around 91%... any idea why?
It's vegas pro itself, sometimes it freeze when it hits a certain frame in the video or a certain effect it struggles to process. You could either pre-render your project by saving it, starting now one and then going to file > Import > load the project > then drag into the timeline or just try render your video but just cut a bit of the end of your video to test see if it's that part its stuck on
is nice settings, i tested it ;)
That's good don't forget to also use de-blocking filter too
Can anyone help?
My camera records at 25fps, when rendering what fps shall i choose?
Every video is at 25fps
Thank you
You can render it at 30fps and it will show as 30 on RUclips but it will play like 25
@@VerticDesigns thank you, but do you know the difference? like if i do 30fps on settings but the video is at 25fps will the re sample of frames damage the quality?
@@VerticDesigns this is how it ended up bit.ly/2kVcddL
Can the camera go up to 30 or a higher frame rate? id just keep testing it to find the best settings for your videos. Even upload one at 25 and see what results
Still usefull =) TY!
No problem!
Thanks!
thanks man,
No worries
I doubt you will see this, but changing FPS to 60 auto reverts to 12 (Half film)
Which mode are you using? if it's intel or nvidia they have certain frame rates so for example they use 59 fps rather than 60. Just make sure it's Mainconcent
@@VerticDesigns same problem here, and i made sure it's mainconcent but the problem is still there
my video turns out black. i do not understand why
What app do i open it with
Windows Media Player or any media player your system has
Thanks
Np
thank you
I chekced Nvidia coding option is much faster than normal, first on list. Like With CPU at 2 % time left 45 minutes and still raise, with Nvidia at 2% time left 10 minutes. I suppose nvidia option is 4x faster.
HOLY THANK U
Why don't you use HEVC which is the new H.265?
thank you
W grid 2 enjoyer
thx
He didn't even say to go to the Project Tab and to set the video rendering quality to best
Finally I dont have to have 100 gigabytes for 5 minute video... but I prefer to make higher bit rate about 50
it not HD layer
im not getting 60 fps
Make sure it's mainconcept in the render mode, Intel and Nvidia only let you use 59 but even if it's 59 fps it will still be played as 60 on RUclips
@@VerticDesigns oh yes I already did it and it's up too :) ruclips.net/video/e_qj44VbxGE/видео.html
why the fuck is my 1 and a half minute long video 32gbs?
But why the hell this rendering takes too much long time? From 20 minutes video renders around 1.5 hours.... This is ridiculously. It's very disgusting😑
Made it choppy and laggy
@@Trezn were you running other programs in the background or overloading your system? Normally this is down to your system or try a different video player see if it's same results
my render not stay in 60 fps,she back to 23
That's a bit wierd just double check everything
thanks man
Thanks!
Np