Nice !! Good job man your welcome i'm stoked you have another one to add to your collection ! I like the on the spot one shot deal kind of videos you make so keep up that formula its the best ! Upside down car in the ditch on fire part killed me lolll
Oh I was meant to say , got two pro 28 bxr complete units removed from new cars for a really good deal . ++++. My ebk is alive but I’m rained off today , not happy lol have a good one buddy
Thanks bug I'm gana rebuild that 3.3 that has scratches by the sleeve and if it's screwed I'll buy a new block but there not bad scratches. Keep burning nitro!!
No problem! Glad it helped ya! And If you're really concerned about it I think you can pick up a new block with bearings for like 30 bucks or something like that on eBay they're pretty and expensive
Thanks man. I have a hard time trying to follow a lot of these other channels that all they do is talk about garbage for an hour syouth for an hour show 5 minutes of the actual issue and then move on to something else like talking about their dog or something haha
I thought about on and off but got nowhere to do it unfortunately. I did contact one of those U blast places but I wasn't about to pay a $100 for an hour haha
That was a good vid. Would have liked to see the tear down too. I have been going through a couple of my Rossi c-12s, a hpi 15fe, OS cv 15 and two 10-E carbs (over the past couple weeks). I know you have done a few carb refreshes in the past but, on one of your next couple rebuilds, would you mind pick a carb to tear down and refresh too? I personally enjoy refreshing the carbs just as much as the engines. I bet others do too. Thx Bug 🔥💪🏻
Thank you very much and I can't put music on my videos otherwise I will get a copyright strike I would like to have some videos with some copyright free music may be one day but nothing like this or bashing videos with it cause you can't hear anything else except for someone else's crappy music maybe a time lapse of working on something but even then I still like to explain what it is I'm doing
Hey man i love watching your vids i personally think your really good at showing engine teardowns theres snippets of info that are valuable Csn i ask you "pinching" i dont have this service Here in the uk Too expensive too send overseas Hsve you ever done it How would you do it Thanks again for your content
Thanks man and you can buy a ER32 collet set make your own shims to pinch only the top of the sleeve underneath the top where the sleeve seats down in the block. You will need old engines to practice on. Because if you get it wrong aka to tight the engine will never be able to turn over again. Good luck!
It's a boost port in the piston it has to be Opposite to the exhaust port if you look through the exhaust port and can see a hole in the piston turned the piston around
Editing aeeeeeeeeeewwweeee I’m the guy you should talk to there’s 2 simple programs Kinemaster and I movie app. Both will be able to use on your phone Use Kinemaster first then load it right to I movie clean it up there then upload but upload as unlisted. Then go to RUclips editor and make a awesome thumbnail. I can help it’s easy man. 👍✌️👊😎
@@thebug4046 Ya man you will be surprised how easy it is to make a vid on your phone. Your gonna say all this time I wished I knew this already it’s so easy. 👊😎 Same for me I was searching high and low for someone to help show me how to make these videos and then finally a guy who is a total BOSS helped me learn by pointing me in the right direction. Now I can edit like a boss To 👊😎👍👍and soon so will you 🤝
@@rcsendandblast1579 nice that's awesome im gunna see about this 100% my buddy is going at that sorta thing I'm gunna get him to show me the ropes to it
@@thebug4046 Just install Kinemaster I movie and RUclips studio That’s all you need 👊😎 Like I said easy peezy Kinemaster first I movie to finish editing then RUclips studio to complete the thumbnails. 👊😎👍👍
Nice !! Good job man your welcome i'm stoked you have another one to add to your collection ! I like the on the spot one shot deal kind of videos you make so keep up that formula its the best ! Upside down car in the ditch on fire part killed me lolll
Hahaha people can't drive around here it's really bad lol and thanks man I tried to keep it to the point as much as I can
Oh I was meant to say , got two pro 28 bxr complete units removed from new cars for a really good deal . ++++. My ebk is alive but I’m rained off today , not happy lol have a good one buddy
My AE .15 carb was seized shut . I used brake cleaner numerous soaking to free loose.Good 3m oil is good insurance for long term storage.
Glad it worked
Thanks bug I'm gana rebuild that 3.3 that has scratches by the sleeve and if it's screwed I'll buy a new block but there not bad scratches.
Keep burning nitro!!
No problem! Glad it helped ya! And If you're really concerned about it I think you can pick up a new block with bearings for like 30 bucks or something like that on eBay they're pretty and expensive
@@thebug4046 hahaha ok thanks
Love the content 👌 keep it up bros the best informational content on RUclips hands down 🇨🇦 🍁 🇨🇦
Thank you for the kind words! KBN!
Dude your vids are awesome just the way u do it straight to the point 👍🏾
Thanks man. I have a hard time trying to follow a lot of these other channels that all they do is talk about garbage for an hour syouth for an hour show 5 minutes of the actual issue and then move on to something else like talking about their dog or something haha
Just a recommendation you should try bead blasting for cleaning the metal
I thought about on and off but got nowhere to do it unfortunately. I did contact one of those U blast places but I wasn't about to pay a $100 for an hour haha
That was a good vid. Would have liked to see the tear down too.
I have been going through a couple of my Rossi c-12s, a hpi 15fe, OS cv 15 and two 10-E carbs (over the past couple weeks).
I know you have done a few carb refreshes in the past but, on one of your next couple rebuilds, would you mind pick a carb to tear down and refresh too?
I personally enjoy refreshing the carbs just as much as the engines. I bet others do too.
Thx Bug 🔥💪🏻
I can definitely do that for ya
i like your videos with no music how your doing it know works great
Thank you very much and I can't put music on my videos otherwise I will get a copyright strike I would like to have some videos with some copyright free music may be one day but nothing like this or bashing videos with it cause you can't hear anything else except for someone else's crappy music maybe a time lapse of working on something but even then I still like to explain what it is I'm doing
Hey man i love watching your vids i personally think your really good at showing engine teardowns theres snippets of info that are valuable
Csn i ask you "pinching" i dont have this service
Here in the uk
Too expensive too send overseas
Hsve you ever done it
How would you do it
Thanks again for your content
Thanks man and you can buy a ER32 collet set make your own shims to pinch only the top of the sleeve underneath the top where the sleeve seats down in the block. You will need old engines to practice on. Because if you get it wrong aka to tight the engine will never be able to turn over again. Good luck!
When I stripped the gp 15! It had a hole in the side of the piston factory not blown up , an explanation would be appreciated buddy left hand front
It's a boost port in the piston it has to be Opposite to the exhaust port if you look through the exhaust port and can see a hole in the piston turned the piston around
Red no name engine is a a dynamite tnt.12 great engine I had a couple of them
Thanks for the info!
I have a dynamite 12s but it looks very different
@thebug404, quick question, i have exceed rc nitro motor that need a new sleeve and piston, where can i get the parts from? vrk .18
VX 18? Engine?
@@thebug4046 yes, my mistake, vx .18.
Oh boy I guess im not talking to my dog in videos any more.
??
@@thebug4046 im joking I know you weren't talking about me
@@derekmast142 ah gotcha I was like the wtf? Lol
@@thebug4046 I do talk to my dog but nit for 40 mins
Editing aeeeeeeeeeewwweeee I’m the guy you should talk to there’s 2 simple programs
Kinemaster and I movie app.
Both will be able to use on your phone
Use Kinemaster first then load it right to I movie clean it up there then upload but upload as unlisted.
Then go to RUclips editor and make a awesome thumbnail.
I can help it’s easy man. 👍✌️👊😎
Hmm sounds good to me I will definitely hit you up when I'm ready to do it
@@thebug4046
Ya man you will be surprised how easy it is to make a vid on your phone.
Your gonna say all this time I wished I knew this already it’s so easy. 👊😎
Same for me I was searching high and low for someone to help show me how to make these videos and then finally a guy who is a total BOSS helped me learn by pointing me in the right direction. Now I can edit like a boss To 👊😎👍👍and soon so will you 🤝
@@rcsendandblast1579 nice that's awesome im gunna see about this 100% my buddy is going at that sorta thing I'm gunna get him to show me the ropes to it
@@thebug4046
Just install
Kinemaster
I movie and
RUclips studio
That’s all you need 👊😎
Like I said easy peezy
Kinemaster first
I movie to finish editing then
RUclips studio to complete the thumbnails. 👊😎👍👍