Hello, I have a problem with remote access using Huawei HG8245H5. It works fine with other routers like ZTE but not this one. I would really appreciate it if you have an idea what the problem might be.
جربت فتحت البور على الايبي المتصل مع الة البصمة على المودم و وضع الايبي الخارجي الخاص بي على البرنامج لكن لم يتصل معي البرنامج وانا متصل على الويفي بستخدام الة البصمة او الحاسوب اخاص بي
@@amineamin6701 أولا يجب ضمان اتصال جهاز البصمة و الكمبيوتر عن طريق الواي فاي (لقد قمت بتسجيل فيديو خاص حول هذا الموضوع للتو سيكون على القناة هذه الليلة إن شاء الله بعد اتمام المونتاج فيه كافة التفاصيل مشروحة). ثانيا بخصوص الإتصال عن بعد عليك التأكد أن الايبي الخارجي الظاهر في إعداد الوان في الروتر هو نفسه الظاهر في الموقع canyouseeme.org وايضا إذا قمت بتجربة رقم البورت 4370 على الموقع يجب أن تكون النتيجة إيجابية success.
I didn't configured this router before, but you need to find an option called Virtual server or Port forwarding in the settings then you can add your zkteco device Port number 4370 and its IP address there.
Of course not, you will need the new IP address, but if it changes everyday then you have to use the ddns service instead of the IP address to make sure you can always connect to your zk device
@@ZKTIMETUTOS thanks for your reply. can this be applied with the new Biotime 8.0 program? i'm new to this program and would really appreciate your thoughts on this. since for it to add device, you need to have the public IP address . so my scenario is, I have 2 devices one is outside of my network, using a different service provider. if I set up the DDNS . would the IP address that I used change or not? cuz if my understanding with the DDNS , you'll have a fixed domain instead of the IP address, it would only update the new ip address but same domain. your thoughts on this will be highly appreciated.
what I mean is , it asks for the IP address, instead of the domain. if I follow your steps near the end of the video. can this be applied to the new application Biotime? by going to the database?
@@vincesunga9987 About Biotime this software works in different way, you need to configure the device to use ADMS or WDMS option to register itself into the Biotime.
How to add my attandence while using PC without going into machine for adding my thumb. How to add attandence and also i want to show it in my HR computer
Hello, I want to know that how to see the data in two or three Computer with ZK Time 5.0 ? That's mean one device, I want to see like two or three computer in same network Its that possible same database see two PC with ZK Time 5.0 Create in login user or another way if i install SQL Database can it possible?
The only way is using SQL server database with the software. The database is installed on one of them acting as server then you create super administrator in the software to allow you to add two more users. And on the other computers you just install the software and set the database connection with the server.
Yes but you need to set the port forwarding of each device in the router settings and each device must have a different IP address on the same local network. Also Be careful if you have two or more devices connected on the same router, you need to change the port number 4370 to different port.
1- if the devices are in different locations and each one with a different router, the configuration is the same as in the video. 2- if more than one device is connected to the same router, you have to change the port number and the IP address of each device and then add each one in the router configuration.
you can't make it static by yourself because it's provided by your ISP and it always changes, so you have 2 options : 1 - purchase a static IP from your ISP and you have to pay it every month 2 - Use a free Dynamic DNS service such as noip.com as I did in the video, and in this case you will use an address like "device.ddns.net" insted of IP Address. (just make sure your router supports the DDNS function)
@@canerenginol3118 Ohh i see now,, the SA40 is not like the other devices, it's called "Standalone Access Control device" that means it doesn't have network connection. This kind of devices is used and programmed without any network connection or software and also it doesn't give you any information about users access time.
Service type is not important, you can choose custom or manual or user setting depending on your router. you can enter whatever you want in service name if you have .
@@timothyduncanmacahilig1378 try to do reset from the device menu, you can reset the admin password by one of the methods I explained in my previous video about unlock device admin password
Works great. We have one at each location all tied to the same subscription.
Hello, I have a problem with remote access using Huawei HG8245H5. It works fine with other routers like ZTE but not this one. I would really appreciate it if you have an idea what the problem might be.
can I connect in different location remotly for example one is at USA and one is at France.
just wanna know, those configuration will be done in other network? or i need to configure it in my network before i can access it to other network??
You need to do those configuration in the same network where the zkteco device is connected.
When port forwarding do i port forward to the local ip of the zkteco machine or the pc hosting it?
You do port forward to local IP of zkteco machine
جربت فتحت البور على الايبي المتصل مع الة البصمة على المودم و وضع الايبي الخارجي الخاص بي على البرنامج لكن لم يتصل معي البرنامج وانا متصل على الويفي بستخدام الة البصمة او الحاسوب اخاص بي
@@amineamin6701 أولا يجب ضمان اتصال جهاز البصمة و الكمبيوتر عن طريق الواي فاي (لقد قمت بتسجيل فيديو خاص حول هذا الموضوع للتو سيكون على القناة هذه الليلة إن شاء الله بعد اتمام المونتاج فيه كافة التفاصيل مشروحة).
ثانيا بخصوص الإتصال عن بعد عليك التأكد أن الايبي الخارجي الظاهر في إعداد الوان في الروتر هو نفسه الظاهر في الموقع canyouseeme.org وايضا إذا قمت بتجربة رقم البورت 4370 على الموقع يجب أن تكون النتيجة إيجابية success.
What device model are you using, man?
I cannot connect my TP link Archer C24 in ZK3969 could you please help me?
Hi, i have a Huawei router model HG8245H. can you help please? how can i config this device to succed the remote access
I didn't configured this router before, but you need to find an option called Virtual server or Port forwarding in the settings then you can add your zkteco device Port number 4370 and its IP address there.
Bonjour pouvez vous faire une vidéo pour la fibre?
does any model on ZK will do that, how about this model ZK3969 ?
if you connect to your device in the local network (LAN) then you can connect remotely to it.
i have attendance software version 4.8 is it possible in it
So using this nat protocol can still connect two routers together, right?
Can you explain more your situation? How these two routers are connected? Are they in the same location or in different remote sites?
@@ZKTIMETUTOS remote
bagaimana cara setup remote untuk device zkteco mini ac dengan software zkbioaccess IVS.
terima kasih
hello. how to connect device to biotime 8.0 via internet? I can't connect
just want to know, if your service provider changes its public IP address, will you be able to use the same IP that you configured in zktime?
Of course not, you will need the new IP address, but if it changes everyday then you have to use the ddns service instead of the IP address to make sure you can always connect to your zk device
@@ZKTIMETUTOS thanks for your reply. can this be applied with the new Biotime 8.0 program? i'm new to this program and would really appreciate your thoughts on this. since for it to add device, you need to have the public IP address . so my scenario is, I have 2 devices one is outside of my network, using a different service provider. if I set up the DDNS . would the IP address that I used change or not? cuz if my understanding with the DDNS , you'll have a fixed domain instead of the IP address, it would only update the new ip address but same domain. your thoughts on this will be highly appreciated.
what I mean is , it asks for the IP address, instead of the domain. if I follow your steps near the end of the video. can this be applied to the new application Biotime? by going to the database?
@@vincesunga9987 About Biotime this software works in different way, you need to configure the device to use ADMS or WDMS option to register itself into the Biotime.
Hello Goo day..Can i use different Devices other than zkteco??? or this Software is for zkteco Devices only
No sir, this software is only designed for zkteco devices. The other devices from other brands have their own software
How to add my attandence while using PC without going into machine for adding my thumb. How to add attandence and also i want to show it in my HR computer
I have downloaded the software and can connect and use software,
If you want to add your thumb from your computer without going to the device, you need to use a USB fingerprint reader with attendance software.
@@ZKTIMETUTOS will it work for attandence, check In? How will it be upload to machine?
Hello,
I want to know that how to see the data in two or three Computer with ZK Time 5.0 ?
That's mean one device, I want to see like two or three computer in same network
Its that possible same database see two PC with ZK Time 5.0 Create in login user or another way if i install SQL Database can it possible?
The only way is using SQL server database with the software. The database is installed on one of them acting as server then you create super administrator in the software to allow you to add two more users. And on the other computers you just install the software and set the database connection with the server.
can i connect 38 device? please give me and example about ip and port of devices to i have a idea thankyou so much
Yes but you need to set the port forwarding of each device in the router settings and each device must have a different IP address on the same local network. Also Be careful if you have two or more devices connected on the same router, you need to change the port number 4370 to different port.
The device must be connect to the router or to the computer?
Connected to the router.
i have tried but unable todo so? can you help me in this issue dear?? i have also static IPs.
What kind of Internet connection do you have? And what is the router model?
@@ZKTIMETUTOS zkt uf100.
Good work how do you connect more than one devices
1- if the devices are in different locations and each one with a different router, the configuration is the same as in the video.
2- if more than one device is connected to the same router, you have to change the port number and the IP address of each device and then add each one in the router configuration.
how to make the public ip as static ip address because every time i restarted our internet always change and the device will become disconnected.
you can't make it static by yourself because it's provided by your ISP and it always changes, so you have 2 options :
1 - purchase a static IP from your ISP and you have to pay it every month
2 - Use a free Dynamic DNS service such as noip.com as I did in the video, and in this case you will use an address like "device.ddns.net" insted of IP Address. (just make sure your router supports the DDNS function)
If the port is blocked by the service provider , then this it will not work .
Yes that's right, it will not work, unless you find an unblocked port and use it for your device.
Can I do it without a router? I mean, if I connect internet via hotspot?
No sir without router you can't remotely access to zkteco devices
@@ZKTIMETUTOS thank you very much for your quickly reply. What about if I use router, but without internet?
I bought SA40, but couldn’t connect it to my laptop. I will return it, if I can’t find a way.
@@canerenginol3118 yes you can use it with the router without internet so you can connect the device to your computer
@@canerenginol3118 Ohh i see now,, the SA40 is not like the other devices, it's called "Standalone Access Control device" that means it doesn't have network connection. This kind of devices is used and programmed without any network connection or software and also it doesn't give you any information about users access time.
How access it remotly from webserver thnks
How many people you met
Can it work on ZKTECO P160?
Yes of course, the P160 has a network connection so it can be reached from internet
zkteco in01-a which software connect
zkteco in01-A can connect with the free ZK Attendance Management Software
@@ZKTIMETUTOS kindly send link
@@fahadyaseen123 www.mediafire.com/file/o9490nkb8260txe/ZKTecov4.8.8build157.rar/file
@@ZKTIMETUTOS how to use this software
@@ZKTIMETUTOS how to find ip address
Good one !! Thanks 😊
i wil try soon
is there any way to access it using a phone?
@@AYEX16MMCMXCII The new ZKTECO software Biotime is the only application compatible with mobile access for attendance management
@@ZKTIMETUTOS I still don't know how to set it up, I keep getting server error. Do you have a demo for the app?
From where we need to take the service type
Service type is not important, you can choose custom or manual or user setting depending on your router. you can enter whatever you want in service name if you have .
how to factory reset zkteco iclock 700?
You can connect to device with the software and click Initial device in Properties
@@ZKTIMETUTOS cant find ip address biometric because static ip
@@timothyduncanmacahilig1378 try to do reset from the device menu, you can reset the admin password by one of the methods I explained in my previous video about unlock device admin password
@@ZKTIMETUTOScan you link your video tuts thanks
@@timothyduncanmacahilig1378 ruclips.net/video/CrynJxSKYJI/видео.html
what is the MODEL of BIOMETRIC
All ZKTeco device that supports network connection.
Can i connect 4 devices
Yes you can, but you need to set a different IP addresses and different ports number than 4370 for the other devices.
I really need this solution pls help
slm lykhalik ta9dar dir lina video 3la site web ila kan momkin
Bhalach had site web ?? Wach momkin ta3tini tafassil kter 3la chno bghiti
@@ZKTIMETUTOS ana 3andi diplome en réseaux informatique nghit na3raf comment créer un site web
ila kan mokin tansahna chno khayna n3rfo fhad domaine
khassek te9ray développement web html et php, hadchi madakhelch f réseau informatique
Oui avec plaisir daba nsayb vidéo spécial 3la hadchi
Thank you for the vodeo. Please what is the password whrn we enter in the browser? I try admin, 12345 but it is not working. Web 3.0
Wow
Good
Numéro de téléphone
Mon numéro de WhatsApp est dans la description