I expect this mower will last several seasons with decent care. ruclips.net/user/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.
Thanks 😊 very helpful video. This is my second season with my Husqvarna TS 146XD. It came with the mower deck installed. I removed it and installed a front blade for winter. I wasn't sure 😕 I could put that deck back on....so thank you very much for taking the time and effort to make a video and post it.
we have the same mower and we have issues with deck height adjustment, at its highest setting it still is scalping our yard, any videos on adjusting the height ?
Thanks for this video. No doubt I'll need to do it again when I replace my blades (very soon). This video was very handy and easy to follow. The whole process was a lot easier than I thought it would be. Thanks again. 🙏👍🙏
You're a lifesaver and I mean it my friend needs her yard mowed and I have it installed her deck mowing deck in about 6 months and forgot how thanks again and I mean it
i was wondering how do u install the mower deck with the pulley bracket so close to the ground on that tractor or do have to take the pulley bracket off
Thank you so much for your instructional video. I have a zero radius and really believe your instructions are going to help me take it spare and put it back!!!😜
Quick Question what if your deck on the left side is higher than the right side... ... how do you level both end..my left side is about 3 3/4 inch and my right side is about 2 1/2... please help... thanks
Hard to say without seeing it myself. There are usually adjustments but yours might be hooked up wrong if it's off more than an inch. Sorry I can't help more
I've accidently hit a pile of soil with probably one of the blades. It doesn't show on it but I sense a slight vibration now as I engage the blades. Should I remove the deck and inspect? Which parts of the deck should I inspect? Is it normal that one of the blades, while the mower is turned of is more difficult to turn than the other?
You may have damaged one of the pulley assemblies. Take the deck and belts off and check for damage to them. Also check to make sure you didn't bend your blade
@@SevenFortyOne no switch that is connected to the deck or the blades The deck was put under and connected to the mower, where is it connected to the blades Is it done with Wi-Di, or is it hard wired?
The switch controls the drive pulley on the engine which drives the deck so no connection between the switch and deck is needed. Check the owners manual for your tractor for more info...
thanks for posting this, it was super helpful. what about the clutch cable though? i got the deck on but my mower deck won’t engage. it’s a manual clutch. i have a 1942 model, but basically everything was the same as your video
I need to adjust the mower blade height. Because even when I have it on 6 its still cutting too low, could you show me how to fix the height adjustment please
This video was so helpful. We have a 22v46, this worked just fine with it. My only question is: how do you get those darn cotter pins off and on so easily ?? lol
@@SevenFortyOne Hi 741, did you take the blade breaks off the deck? Mine is in the way of the belt and it is eating it up because it is set too far out when engaged.
Take off your non adjustable hanger and replacement with an adjustable hanger your left side is coming up higher than your right side I don't know why Husqvarna couldn't put 2 adjustable hangers order yourself an adjustable hanger and your deck will appreciate you
LOL, my same bracket broke loose as well. only had a couple small welds on one side. so I welded both sides on both brackets on all conectingf surfaces. how lazy and stupid for them to approve such a crappy weld on the very brackets that have such stress on them. really telling and disappointing.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
what happened to the links you promised at beginning of the video?? I wanted to see how you took the deck out. Bummer!
I lost the footage I had and meant to re-shoot but forgot all about it...sorry about that...
ruclips.net/video/T_N9qre4xq4/видео.html
@@SevenFortyOne I posted this video over on Dennis's site so you're even LOL....
I expect this mower will last several seasons with decent care. ruclips.net/user/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.
Awesome tutorial. Direct, to the point, very clear instructions. Made life super easy, you’re awesome!
Excellent video! I was helping a friend put his deck back on and this was just what I needed. Thanks
Very informative without a lot of unnecessary stuff. Really Nice.
Thank you!
Thanks 😊 very helpful video. This is my second season with my Husqvarna TS 146XD. It came with the mower deck installed. I removed it and installed a front blade for winter. I wasn't sure 😕 I could put that deck back on....so thank you very much for taking the time and effort to make a video and post it.
Glad this helped!
we have the same mower and we have issues with deck height adjustment, at its highest setting it still is scalping our yard, any videos on adjusting the height ?
Thanks for this video. No doubt I'll need to do it again when I replace my blades (very soon).
This video was very handy and easy to follow. The whole process was a lot easier than I thought it would be.
Thanks again. 🙏👍🙏
Thanks, just in time for Spring!
Does your left front wheel ever binds/rubs when turning on the deck edge? Thanks
No
Appreciate the reassembly help
Thanks, sorry was looking for a clutch didn't know that model didn't need one
nice informative vid
You're a lifesaver and I mean it my friend needs her yard mowed and I have it installed her deck mowing deck in about 6 months and forgot how thanks again and I mean it
I'm glad this helped! Thanks for letting me know
Thanks for the awesome video! This helped me change out my rusty deck with a good one 😀
I had one of my deck hangers break off, looked at your deck just to see what it was. 4-5 years old. My last mower lasted 20+ years.
Mine broke too.. had to have it welded. They don't make stuff like they used to....
i was wondering how do u install the mower deck with the pulley bracket so close to the ground on that tractor or do have to take the pulley bracket off
You should watch the video, I show how I installed the deck here
i need it for this tractor TS354XD HUSQVARNA LAWN MOWER 24 HP KAWASAKI 54 INCH DECK
You'll have to search for instructions on that tractor, mine is different
Thank you so much for your instructional video. I have a zero radius and really believe your instructions are going to help me take it spare and put it back!!!😜
Normally I don’t comment but I will say thank you very helpful
Mine came off too! Just took it into the shop to get it rewelded… They charged $100… I guess that’s a good price?
Same exact thing happened to my mower, those parts broke off and had to have those parts welded on as well!
I hate this robotic welding system!!!!!!!!! The welds aren't as wide and as hot as they should be.
Quick Question what if your deck on the left side is higher than the right side... ... how do you level both end..my left side is about 3 3/4 inch and my right side is about 2 1/2... please help... thanks
Hard to say without seeing it myself. There are usually adjustments but yours might be hooked up wrong if it's off more than an inch. Sorry I can't help more
@@SevenFortyOne it wasnt hooked up wrong i think it possibly a couple of things on the ground like the root or someting.. and hence it got lop sided.
I have a LGT48DXL and I venture to say the processes your showing on yours will work for me as well. Thanks.
I've accidently hit a pile of soil with probably one of the blades. It doesn't show on it but I sense a slight vibration now as I engage the blades. Should I remove the deck and inspect? Which parts of the deck should I inspect? Is it normal that one of the blades, while the mower is turned of is more difficult to turn than the other?
You may have damaged one of the pulley assemblies. Take the deck and belts off and check for damage to them. Also check to make sure you didn't bend your blade
Thanks, but how do you activate the blades, seems i didn't see that being connected, was it?
Thumps-up
The belt drives the blades which are turned on and off through a control on the dashboard.
@@SevenFortyOne no switch that is connected to the deck or the blades
The deck was put under and connected to the mower, where is it connected to the blades
Is it done with Wi-Di, or is it hard wired?
The switch controls the drive pulley on the engine which drives the deck so no connection between the switch and deck is needed. Check the owners manual for your tractor for more info...
I wish you had shown re attaching the clutch cable to the deck.. oh , and couldn't get to link on removal of deck.
Mine doesn't have a clutch cable. I'll fix the link later when I can get to a pc
thanks for posting this, it was super helpful. what about the clutch cable though? i got the deck on but my mower deck won’t engage. it’s a manual clutch. i have a 1942 model, but basically everything was the same as your video
Great video👍
Thanks mate!
Great work Job. Thanks for the informative video 👍
What is that front rod called?
I need to adjust the mower blade height. Because even when I have it on 6 its still cutting too low, could you show me how to fix the height adjustment please
Adjustment bolts/nuts are on backside 2 braces
Very helpful and nicely done. Thank you!
any1 know the part number for the rod @5:12 ?
This is the man
Thanks for the video.
Thanks
Thank you.
This video was so helpful. We have a 22v46, this worked just fine with it. My only question is: how do you get those darn cotter pins off and on so easily ?? lol
Glad this helped!
I used a screw driver to leverage them off.
Seems the welds of the bracket breaking is a common problem on the husqvarna.
thank you
awesome video. Thank you for posting this.
Replace mower belt on ts342
wow, you make it look easy
You didn't replace the anti sway bar in the back. I am having trouble keeping it on my deck and you didn't even put it on.
What? I put everything on that came off. Do you have a different mower?
Thanks sir
Great video
Thx bro.....
Good info Rob, isn't that the deck the dealer was way over priced on the repair?
Yep...same deck
@@SevenFortyOne Hi 741, did you take the blade breaks off the deck? Mine is in the way of the belt and it is eating it up because it is set too far out when engaged.
You shouldn't need the diagram. It's only 4 pulleys on that deck. That makes belt routing pretty straight forward.
Take off your non adjustable hanger and replacement with an adjustable hanger your left side is coming up higher than your right side I don't know why Husqvarna couldn't put 2 adjustable hangers order yourself an adjustable hanger and your deck will appreciate you
what does Husqvarna mean?
?
What about the engagement cable 🥴
Robert he don't need a engagement cable he engage his blades electrically with his pto clutch pull to engage push to disengage
LOL, my same bracket broke loose as well. only had a couple small welds on one side. so I welded both sides on both brackets on all conectingf surfaces. how lazy and stupid for them to approve such a crappy weld on the very brackets that have such stress on them. really telling and disappointing.
Thank you. Definitely will help me.
Nice video, but the video needed to be 21 seconds longer. Then it would be 7 minutes and 41 seconds long. 😂
I noticed that too....then I started thinking maybe I should make all of my videos 7:41 long....
whoever welded that is also not a very good welder 😅
It's better than I could do...and it's still holding so that's all I really care about
Great video