U are a pro. (Looks like i need a electrician). BEST video instructor, step by step! I should try those very expensive workshoes , and that tan I'm jealous!
I think this tool will be very helpful for me the better locks and especially padlocks. However, for lower end locks, I think a simple rake tool (and tensioner) will be faster. I say this based on my experience of watching my brother do some unlocks for customers and later showing me. I swear he owned many locks faster with pick tools faster than I could have with the key. As for myself, after being shown, on my first lock ever, I successfully opened it in only 3 rakes. I was amazed at how easy it is to do. Maybe it was beginners luck or just a good teacher. Since then I've managed to get several locks with a paper clip albeit much harder and more time. I keep saying I'm going to but a real pick kit but I just don't have much of a need for one as I use it only about once every 2-3 years.
What a terrific video! This will save me time and money! Thanks for all of the time, effort, and expense you invest in these videos. Always a thumbs up and looking forward to the next video!
Well done! I was wondering hot to attack the pick to the toothbrush and I think you found the best method. I wish they made these picks in brass or even a hard nylon. The steel picks tend to damage the softer brass inside the lock when used a lot in the same lock.
Thanks for watching! Be sure to check out my "Lock" video playlist below for many other videos of interest to you, and share. ruclips.net/video/6JmUnO1XYOk/видео.html
I need to make this a short comment because I have to be back at my cell for muster but thanks for all the tips you give here. I'll let you know how it goes.
just an observation from my experience, don't start the device until you get the blade into the key slot. Stick the blade all the way in, back it out just a touch then turn it on or you run the risk of bending the blade inserting it into the key slot with it running. I have actually seen people damage blades with a Multipick Kronos by doing just what you are doing in this video.
Hi John, I thought I explained it very well since the modification is so easy to do and I supplied images. You need a small heat gun, a Dremel with a cut-off wheel, and crazy glue. :-) Thanks for watching!
Thanks for watching Brian! Be sure to look over my "Locksmith & Bypass Tools" video playlist below, and most importantly share my channel with many others. ruclips.net/video/6JmUnO1XYOk/видео.html
Take your time, make it right, and get the feel for it. Thanks for watching! Be sure to look over my "Locksmith" related videos below and most importantly share. ruclips.net/video/6JmUnO1XYOk/видео.html
Just one question for you, ..if I have to buy an electric pick gun to get those pick tips, then why not just use the pick gun that you bought? Hey I’m just busting your chops, you made a fine video. I both Liked and Subscribed.
Hello, can you provide me with the particular toothbrush you used in this video? This is the type I want to use as this moves up and down as compared to a circular motion that the others move in
@@electronicsNmore Possession of burglary tools is a 3d degree felony in Florida. Fla. Stat. sec. 810.06 (Possession of burglary tools.-Whoever has in his or her possession any tool, machine, or implement with intent to use the same, or allow the same to be used, to commit any burglary or trespass shall be guilty of a felony of the third degree, punishable as provided in s. 775.082, s. 775.083, or s. 775.084.)
I don't know why, I thought it was extremely simple. Apply heat, pull off the brush, cut to 1" long when cool, make another cut into the end as shown, cut tube to 3/8", apply glue to all parts, then insert the blade fully and tap down the ring.
electronicsNmore I got it through the video. These people are just idiots. Don’t repeat yourself for them. Bet they don’t donate! Bet they don’t purchase any brand t shirts. All they do is want and take! Fuck them bro! Great videos
@@electronicsNmore The issue isn't a failure of intelligence or lack of imagination on the part of some of your viewers, rather it's simply that some people understand and retain instructions much better when they can see someone else performing the task. These people are just visual learners. Some people prefer text, some prefer visuals, others prefer the spoken word. Me, I'm somewhere in the middle but I can certainly understand the issue - if you're a visual person, you just get a concept faster and more thoroughly by seeing it acted out, it's the language through which they see and understand the world. If you just barely grasp a foreign language, and can technically understand it, would you want to use it to learn something else? I think of it like that, it's not that they can't understand, but it's the way they understand best.
Read the video description area. If you don't like this kind of video, then you'll absolutely hate lockpickinglawyer and bosnisnbill's videos. Criminals are too stupid to make what's shown.
This isn't new they have made these for years out of electric toothbrushes,vibrators,massagers, and just wire springs.... so don't blame him criminals have been around for as long as humans have existed and will always find ways to subvert the laws
@@bravohomie you can but you shouldn't so spit it out and wipe that chocolate from around your mouth. I said chocolate because it sounded less disgusting but I wouldn't want anyone to get the wrong idea because of my use of a less offensive word when I actually meant shit.
@@electronicsNmore yeah possibly, but them locks are crap , device creative but locks below par , can't get no more free randy, these "b $" gotta start paying me ,
Wtf. I saved that exact toothbrush because I knew that oscillation would be useful for making something. Thanks for this great idea
criminal trying to be quiet.. turns on pick ..*caught* :)
Maybe if you moan a bit while you pick, people will think you're just sitting on it 🤣
U are a pro. (Looks like i need a electrician). BEST video instructor, step by step! I should try those very expensive workshoes , and that tan I'm jealous!
I think this tool will be very helpful for me the better locks and especially padlocks. However, for lower end locks, I think a simple rake tool (and tensioner) will be faster. I say this based on my experience of watching my brother do some unlocks for customers and later showing me. I swear he owned many locks faster with pick tools faster than I could have with the key. As for myself, after being shown, on my first lock ever, I successfully opened it in only 3 rakes. I was amazed at how easy it is to do. Maybe it was beginners luck or just a good teacher. Since then I've managed to get several locks with a paper clip albeit much harder and more time. I keep saying I'm going to but a real pick kit but I just don't have much of a need for one as I use it only about once every 2-3 years.
What a terrific video! This will save me time and money! Thanks for all of the time, effort, and expense you invest in these videos. Always a thumbs up and looking forward to the next video!
Thanks for watching Todd! Can't wait to see what Monday will bring on your channel. :-)
Well done! I was wondering hot to attack the pick to the toothbrush and I think you found the best method. I wish they made these picks in brass or even a hard nylon. The steel picks tend to damage the softer brass inside the lock when used a lot in the same lock.
Thanks for watching! Be sure to check out my "Lock" video playlist below for many other videos of interest to you, and share.
ruclips.net/video/6JmUnO1XYOk/видео.html
Give that to the Lock Picking Lawyer!
I bet he'd love to get his hand on it. :-) He has a great channel. Thanks for watching!
yeah bro u alive??? post some videos!!!
I just through all my keys away because I have this now 👍🏼
@00 CIA AGENT 007 🤣
I need to make this a short comment because I have to be back at my cell for muster but thanks for all the tips you give here. I'll let you know how it goes.
just an observation from my experience, don't start the device until you get the blade into the key slot. Stick the blade all the way in, back it out just a touch then turn it on or you run the risk of bending the blade inserting it into the key slot with it running. I have actually seen people damage blades with a Multipick Kronos by doing just what you are doing in this video.
Yup. I'm convinced. I'm subscribing
Great to hear! I have MANY videos on my channel, so you should be busy for a while. :-) Thanks for watching
Very Good!...
Hi sir great video, it would be having better if you showed us step-by-step how to make it thanks as usual
Hi John, I thought I explained it very well since the modification is so easy to do and I supplied images. You need a small heat gun, a Dremel with a cut-off wheel, and crazy glue. :-) Thanks for watching!
Simple and effective
🤗
Thanks
You're welcome Ed!
I agree with project farm
Uses the most quietest method of picking
😆
I need to try this.
Thanks for watching Tom!
Good channel Thank U
Thank you! Be sure to share.
Any chance you could include the brand and model (or show the packaging in a future video) of the brush you used please? Thanks!
Sonicare E-series 1.
I think any cordless toothbrush with that basic shape will work
Great! 👍👍
Thanks for watching Brian! Be sure to look over my "Locksmith & Bypass Tools" video playlist below, and most importantly share my channel with many others.
ruclips.net/video/6JmUnO1XYOk/видео.html
The way you move it, these locks would open even if it was turned off. Moving a normal pick in them poor locks like that would have the same effect.
The fast vibration is what does it. The pins vibrate to the shear line.
I'm gona try to make one
Take your time, make it right, and get the feel for it. Thanks for watching! Be sure to look over my "Locksmith" related videos below and most importantly share.
ruclips.net/video/6JmUnO1XYOk/видео.html
I m a thief , and sure this will help me ,,
Thanks for this new idea ,,,,
Good luck in prison. :-)
@@electronicsNmore could prison doors could be picked using this method
@@haleemathulbadriya LOL They usually use lever locks. Thanks for watching! Be sure to share.
manjit singh thief not theif
@@harley092355 my mistake ,,
Nice Let's just make a video showing everyone how to walk in people's homes with this fun toy
Most criminals are stupid morons. LOL They use hammers, bricks, crow bars, or bolt cutters.
So...now I have to replace all my deadbolts with some device that isn't pickable, and likewise Master locks. Gee thanks Mr. Wizard! 😠
Giantly Radical...! Im going to China to make this...
Ah tank u velly mush
❤
And I was looking to see if anybody made a tooth pick to put on their sonicare for a de-scaler
Just one question for you, ..if I have to buy an electric pick gun to get those pick tips, then why not just use the pick gun that you bought?
Hey I’m just busting your chops, you made a fine video. I both Liked and Subscribed.
You in the US?
You can buy an assortment of 12 snap gun needles at Sparrows for $8, plus $5.95 shipping.
Why the heck can't they make locks that are not susceptible to this type of attack?
COOL VIDIO,,BUT YOU SKIPPED THE ASSEMBLY PARTS
I explained very well. Which parts?
Does anyone know exactly what model of Philip's sonicare he's using?
The lower priced unit
Why did I order a lock picking set? I could of saved a lot of money and time. Lol
Thanks for watching Frank!
Wow🤣🤣🤣🤣
Which brush u r using,,, share please the details
A lower priced Sonicaire.
were do u get the needel frpm?
It was an extra with my pick gun.
So now all my door locks are useless :)
🤣 Not true.
Wow can we buy the tool from you?
I only show how to make things, I don't sell what I make. Thanks for the offer.
Uber noisy though
Hello, can you provide me with the particular toothbrush you used in this video? This is the type I want to use as this moves up and down as compared to a circular motion that the others move in
Sonicaire
@@electronicsNmore have you come up with any variants of this where the pick blades are interchangeable or replaceable rather than permanent?
In Ohio if you get caught with that they will charge you with Possession of Criminal Tools.
Glad I live in FL. So having a tool makes you a criminal? LOL
It's a hell of a flosser!
LOL. You'll lose all your fillings and have bloody gums.
@@electronicsNmore Possession of burglary tools is a 3d degree felony in Florida. Fla. Stat. sec. 810.06 (Possession of burglary tools.-Whoever has in his or her possession any tool, machine, or implement with intent to use the same, or allow the same to be used, to commit any burglary or trespass shall be guilty of a felony of the third degree, punishable as provided in s. 775.082, s. 775.083, or s. 775.084.)
@@chuckm.9744 Clear you don't know how to interpret laws.
👩🦱wife have you seen my toothbrush 😳🤷♂️ 🥶sheez lucky she didnt ask about her DILdo 👀😜😂😂😂🖖🦘👈
not really something for quit stuff lol
Unfortunately some of the viewers can’t visualize how you explained putting this together. Oh well.
I don't know why, I thought it was extremely simple. Apply heat, pull off the brush, cut to 1" long when cool, make another cut into the end as shown, cut tube to 3/8", apply glue to all parts, then insert the blade fully and tap down the ring.
electronicsNmore I got it through the video. These people are just idiots. Don’t repeat yourself for them. Bet they don’t donate! Bet they don’t purchase any brand t shirts. All they do is want and take! Fuck them bro! Great videos
@@electronicsNmore The issue isn't a failure of intelligence or lack of imagination on the part of some of your viewers, rather it's simply that some people understand and retain instructions much better when they can see someone else performing the task.
These people are just visual learners. Some people prefer text, some prefer visuals, others prefer the spoken word. Me, I'm somewhere in the middle but I can certainly understand the issue - if you're a visual person, you just get a concept faster and more thoroughly by seeing it acted out, it's the language through which they see and understand the world.
If you just barely grasp a foreign language, and can technically understand it, would you want to use it to learn something else? I think of it like that, it's not that they can't understand, but it's the way they understand best.
Or you can buy one for $5 at Wallyworld.
Don't think you should be showing people how to pick locks so easy I'm sure criminals look at the stuff too
This is nothing compared to what lock picking lawyer shows. LOL
SIR LET ME SEE YOUR HANDS. MOVE SLOWLY
😂
Makes a hell of a noise if you want to enter someone else's place... you are not very bright
Can we please stop educating thieves with more ways on how to commit a crime?
Read the video description area. If you don't like this kind of video, then you'll absolutely hate lockpickinglawyer and bosnisnbill's videos. Criminals are too stupid to make what's shown.
This isn't new they have made these for years out of electric toothbrushes,vibrators,massagers, and just wire springs.... so don't blame him criminals have been around for as long as humans have existed and will always find ways to subvert the laws
Can you eat shit?
@@bravohomie you can but you shouldn't so spit it out and wipe that chocolate from around your mouth. I said chocolate because it sounded less disgusting but I wouldn't want anyone to get the wrong idea because of my use of a less offensive word when I actually meant shit.
Ugh ...that toothbrush cost more then every lock it picked !!!! Click bait..
Wrong, and wrong. The toothbrush was $20 - $25, and you need to learn what clickbait is.
@@electronicsNmore yeah possibly, but them locks are crap , device creative but locks below par , can't get no more free randy, these "b $" gotta start paying me ,