Это видео недоступно.
Сожалеем об этом.
Making a drop point hunting knife
HTML-код
- Опубликовано: 6 май 2017
- Instagram: / huzjakknives
Short video of making a hunting knife. Steel I used is Bohler n690 steinless steel, handle materials are micarta, black g10 and red vulcanized fiber liner.
Sharpening system is Edge pro apex clone from ebay.
If you have any question or something to say, please leave a comment or you can contact me on filip.huzjak@gmail.com :)
Music copyright:
Videozapis Fiddles McGinty od izvođača Kevin MacLeod licenciran je licencom Creative Commons Attribution (creativecommons.org/licenses/...)
Izvor: incompetech.com/music/royalty-...
Izvođač: incompetech.com/
Videozapis Texas Techno od izvođača Audionautix licenciran je licencom Creative Commons Attribution (creativecommons.org/licenses/...)
Izvođač: audionautix.com/
Videozapis Front Porch Sitter od izvođača Audionautix licenciran je licencom Creative Commons Attribution (creativecommons.org/licenses/...)
Izvođač: audionautix.com/
Beautiful knife, good job. 😁 Greetings from Poland. 😁🇵🇱🇵🇱👍😉
Absolutely beautiful knife!
dude this deserves more views! so crisp and clean, it's a work of art my friend, great work!!!
kano7o Thank you!:)
Yes-stop the music and listen to the blade slowly slice through the paper. Then fire it up for the beauty shots. Really nice knife build.
Lovely classic design. Kinda looks similar to a trc south pole in its design. About the perfect size for a utility knife. Love it.
I know this is an old video, and probably no one will see this comment, but I was impressed with the quality of the knife, as well as the quality of the video, and as a matter of fact, the channel as a whole.
You sir, have earned yourself a subscribtion from me. Keep the good videos coming my dude.
nothing beats the handcrafted beauty of your knife, great job.
Aaron Keeling thank you!!
Nice to see a pro at work. Amazing!!
Good to see someone using Stainless Steel for knife making
Beautiful knife, and I love the penguin!
Beautiful.
Awesome! I like the look of it a lot.
Thank you!
Awesome knife. Masterpiece!
Awesome, beautiful knife!
Nice! Very nice work! I’m happily subscribing
Beautiful knife.
Amazing and beautiful knife! Art at its finest. Is there a template like that knife we could use ? To try and make this knife ourselves..?
That is a great looking knife!
Beautiful knife!
Beautiful knife!!
Odlično! Jako dobar posao!
Hvala!
That's a sweet looking blade bro!
That's crazy sharp! Great video, you did a fantastic job!
Thank you! :)
Very nice!!
Goob job! :) Keep it up!
very nice knife.
you earned a subscriber
Damn! Pretty knife!
Wow great job!
cyclist01222 Thank you!
I love that handle!
Marc Tilley thank you!
Exactly the type of knive that i like. Really nice made.
Greetings from Turkey.
+Sinan Can Bıçak thank you :)
Damn, beautiful knife. Great job man!
Thank you!
Great looking knife! Love your makers mark! LOL
Thanks :)
Awesome
Top shelf stuff mate, thoroughly enjoyed watching that.
My family used to do quiet a lot of backyard butchering when I was younger, so much in fact that they used to actually get raided by the authorities, it was only lucky that the head copper in town liked his cheap T-Bones that he used to let my family know when they were coming. Anyway I used to chase a lot of pigs with dogs and shoot a lot of foxes and goats as I used to enjoy tanning skins and giving them to mates to put in there man caves. I had brought a knife the exact same shape as the one you made here when I first started skinning and tanning and I had been given a tonne of knifes before I'd brought it but it was my go to knife. My father borrowed it of me one day when he had a few sheep to kill as he wanted to see how it worked " he used to always say keep your knife sharp and let it do all the work" , but them old fellas had a knife for everything. He thought that knife for medium to smallish size game was the best all round shaped knife you could have, and eventually I never seen it again.
Thank you very much for comment! I am glad you enjoyed it.
This knife was a gift for my uncle who is hunter, he tested it few weeks ago by skinning 110 kg heavy hog. He relly liked knife and said it is very good shape. I also think this is great shape, it is very universal, and that is why I made it in that shape:)
Very beautiful.
Amazing 👌
very good skills.. master skills.
Yea nice blade, subscribed :)
+MrSoloun thank you :)
That's a beaut!
Good looking blade keep up the good work
James Lawyer thank you!
Gorgeous knife
Ifiok Obot thanks!
And that, sir, is how you make a wonderful knife!
Thank you :)
brilliant
Nicely did sir👍 🍻
Brandon K Thank you!
Good job
Very nice
Saweeeeeet!
Nice work. Love the handle. I gotta say i would recommend to clamp the knife while drilling. Nasty things can happen
Very nice work nice !
greetings from Germany.
O que você pensa do Brasil? Como realmente ele esta sendo visto?
Nice 👏🏽👏🏽👏🏽👏🏽
Me parece un cuchillo perfecto !!
Prekrasan noz,
imate li mozda link od stranice gdje nabavljate remenje za tracnu brusilicu?
Where do you get your logo stickers?
Sviđa mi se jako i oštrica i drška, ali ovaj trenutak 8:12 naprosto izazviva nelagodu kod mene :D Moja ti je preporuka da uvijek poliraš od sebe :) Nadam se još puno interesantnih videa ovde.
Rain48000
hvala na komentaru! :)
i hvala na savjetu, nisam razmišljao o tome, ali da, okrenut ću polirku naopačke i polirati od sebe. sigurnije je u svakom slučaju.
what a beautiful knife is this !
Is this your product ? or hobby?
Hello, do you have a full-size template for this knife or direct me to some options?
Pinterest search for knife templates you will get thousands
Did you have the stickers made for your logo? If so where? Thanks.
Yes, just a regullar pvc stickers. At a local print/copy shop in Croatia. I sent them logo in vector format and they made stickers. Cheap and easy.
Hello!
Good job:)
What steel did you use?
Shola Blanco
Don 😎
You have a grouse set up mate, just started getting into knife making using what i have at work and some 1075 blanks.. hopefully ill be as good as you!
Thank you mate! We all started this way, check out my earlyer videos..:)
This might be the time to ask..... why is it that I almost never see a knife maker put a pommel on a hunting or camp knife? Seems like it would a good modification for those times when some lite pounding is called for. Thoughtsa.
What kind of camera are you using? Awesome knife!
+Bryan Jones I used Canon 6D. Thank you!
What is that awesome first pin?! Really neat look! Is it custom-made? 4 brass pins inside a bigger brass pin, then filled with epoxy?
That's right, 4 small brass tubes inside one bigger brass tube inside even bigger aluminum tube :) filled with epoxy. I made it myself, not hard to make...
Wow. Amazing job. Love the knife. Keep it up! 💪
5:30 I thought he was gluing his phone. Hahaha
haha :D
what is the name of this clamp device at 2:38 and is it possible to make one on your own
Exttendo Beats It's grinding jig. I made this one. You can make it, but you can also buy high quality one from other makers. Just search for "knife making grinding jig" on ebay/etsy/instagram...
@@FilipHuzjak thank you very much
No heat treat?
I sent it to heat treatment specialist. I don't have heat treating oven yet.
great model. is it for sale?
Very good!
Didn’t you make hardening and tempering process?
Thank you!
I sent it to a professional to do hardening and tempering. It is ~59 hrc.
OK! Nice work, thanks for answer me
Nabacio si neke ozbiljne opreme u radionicu,fino.Grinder od Batković alati ? Extra urađeno.Koliko naplaćuju u Hr termičku obradu,kaljenje i otpuštanje?
DELTA-SPORT,Klub za praktično streljaštvo Hvala! Tako je, grinder je od Batkovića, a TO je vise manje svugdje oko 100 kuna.
отец всегда говорил - в перчатках это не работа!
Hey man that is an awesome looking knife. Love the two different colours in the handle and the pins came out great love the mosaic on as well. How long did it take overall to make the knife?
Oh and by the way I have had an edge pro apex (proper one) for a couple years now and it is worth every dollar. So if you have the money well worth it. Oh and the drill stop collar makes things much easier.
scottecooke Thank you very much!
It took me about 3 days of work,around 8 -10 hours every day. (overall around 2 weeks because I send it to heat treatment).
Yeah, the stones on fake Edge pro are horrible :P
scottecooke
It took longer than it should because i spent many hours fixing mistakes :D I struggled with straight bevel... I only made few knives and still learning.
I certainly have in plan buying better sharpening system, was thinking about lansky wit diamond stones.
Damn, well I love the result only thing I would change (apart from things I can't see in the video) is that after using the router on the handle to also round them a bit with sandpaper. But if it feel comfy then no need because I like the look just wondering about comfort level.
As for knife making I am super new. I made one out of mild steel and one out of a carpenters saw blade (0.8mm thick). And I loved it. So now I am going to make some out of some 1084 and micarta which I just got in.
Anyway I started exploring knife making because I was into sharpening. And then a couple peoples knives needed new handles and then I was like surely I could make the rest lol.
But I have learnt tons about sharpening (not everything, it is an endless rabbit hole), so if you tell me what your budget is roughly I could help point you in the right direction. Also by the sounds of it you want a fixed angle system, is that correct? I'm not selling anything just though maybe I could help since so many of you youtubers help me by answering questions.
scottecooke I did round edges on handle wit sand paper a bit so it is comfortable to hold. It's not in video...
Well, I'm looking for fixed angle sharpener, not more than 100$, less if possible. What do you think about Lansky?
Cool I wish I could make one like that. I will one day but not for a while lol. Thanks for the inspiration though. I can watch these knife making videos all day.
With the kind of budget you are talking about you will have to go with a lansky type system. With out a doubt I would recommend the diamonds. If you don't when one dishes you will have to flatten them all to that same thickness or it won't hit the whole bevel properly and you either won't be hitting the apex or going a bit steep.
I actually have a GATCO ultimate diamond system. Which I got for Christmas before getting the edge pro apex.
I love the gatco and the benefit it has over the lansky is the stones are a bit wider. So unless you are sharpening knives with recurves then it will help remove steel faster and if you want a polish the ceramic stone it comes with is great to start with before the strops. I haven't used the serration stone so can't comment on how good it is.
For some reason the Gatco comes with honing oil (not sure if the lansky does). I wouldn't recommend it on diamonds or ceramics. They are great with water and a add a drop or two of dish soap if you want helps clean it easier. But use the oil for something else.
But for either system especially the Gatco because of the ceramic stone buy a eraser block from the hardware store or amazon or ebay. They are cheap but clean out ceramic stones and diamond stones amazingly well. Best little accessory I ever bought for them.
Either system would be good for that price range gatco or lansky. One problem you can't avoid with that type of system is that because the blade is clamped and you can't move it along the table like an edge pro you will find that the bevel angle changes from the heel to the tip of the knife. And is more noticeable the longer the knife blade is. This can't be avoided without re clamping every inch or two. It is just a limitation of the system unfortunately. But with either of these systems you will get scary sharp edges every time without fail.
If you make a knife, heat treat it yourself. I would understand if the blade steel was CPM 20CV or S35VN, that requires a bit better equipment, but it is N690- you can't fuck up N690 and it's really easy to heat treat
I disagree, you can fuck up n690 in many ways - not necessarily fuck up, but end up with low hardness. When I made this video I didn't have any heat treating equipment. Now i have ht oven and I heat treat them myself, with ss foil and aluminum plates to 58-60HRC.
Wait, you can strope on cardboard?!
Great knife!
Put a little polishing/stroping paste on it and it is good to go :) piece of flat soft wood works well too.
@@FilipHuzjak TIL, thanks for the reply!
It's a really beautiful knife. Where did you find the template?
Thank you. I designed it
Huzjak Knives Would it be rude if I asked you to share it with us?
Well I don't have it in digital format, I drew it on paper
Huzjak Knives Oh too bad, it's really good
Is that a home made sander?
+Wesley nope, I bought it from a man who produce them here in Croatia...
Is this for sale.
I would love to buy this knife. Do you sell them?
I don't sell knives yet, this knife was a gift for member of my family...
Thank you for asking.
We are probably distant cousins, but I'll even pay you for it. Is there a price that would maybe change your mind?
That is one awesome knife. Thanks for sharing!
hate drilling in stainless steel, hesus thats a nightmare for me
Linda
⭐⭐⭐
Hey can you give me a knife template of this knife
Sorry I don't have a template, I draw it on paper, cut it out and made a knife.
Great knife, is the design yours? Regards
+Nuno Ricardo thank you! Yes it is my design, but recently I upgraded it slightly :) you can check it on my instagram, link in description
Thanks, it's a very nice design, I myself just started knifemaking some years ago but I tend to make replicas and I want to start making my own designs... Congrats, regards from Portugal!
Filip Huzjak no HT?
Odlično, prekrasan nož :) di nabavljaš materijal za ručke? i ako se ne varam korice su napravljene od kydex-a ili od termoplastike? i to me zanima di ima kod nas za nabiti... thx
+Igor Pavić hvala na komentarima! Mislim da nema tog nigdje kod nas..takve stvari narucujem s jatagan.eu i slicnih stranica. Celik, kydex, mikartu, g10 itd.
no vi que lo templara? o la termodinamica
beautiful. As a tradesman, can I suggest you roll your sleeves up. I'd hate to see that baggie shirt pull your wrist in to that buffer and break every bone in your hand. Seen it happen on a lathe once. Not pretty.
ken Lane thanks. This buffer has very weak motor (can be easily stopped with harder press when buffing) so it probably wouldn't break bones. But thanks anyway, safety tips are always welcome 👍
Well done, Sir! Consider me subscribed!
BostonGuy_617 Thank you!
hi
premium ****
I just got put on to dropshipad.com should check it out.
hi
+Taimoor Mengal hi.