Awesome glad you like the video and I’m thankful that you stop by the channel and checking out the videos. Appreciate you. Have a good day. God bless.💯👍🏾
Yes, I totally understand. I just upgraded everything before it breaks even though it might not break. It’s just a habit of mine. Thanks for checking out the video. Thanks for stopping by the channel. Have a blessed day.💯👍🏾
Great looking build! That’s how it’s supposed to be done!! I’m building a DB Pro right now with pretty much the same upgrades. I tried the aluminum rod ends but they break way too easy. I enjoyed your video thoroughly. Keep pulling those triggers
Yessir thank you for the kind words and thank you for checking out the video Yeah so far I haven’t had any problems with anything breaking on this I don’t do a whole bunch of crazy bashing just open park runs and street runs an open field. I’m not a big jumper. I just love to build thank you. Have a great afternoon.🙏🏾💯👍🏾
@@geraldchilders2625 yes for sure. I use a lot of GPM parts and a lot of my builds because it color coordinates with what I’m doing. I’m not a big basher. I just like to do open fields and street runs so that’s perfect for me. Thanks for the comment. Thanks for checking out the video appreciate you have an awesome day. God bless.
@@geraldchilders2625 thank you yeah take your time. Just do a little stuff at a time. That’s what I do. I just buy parts here and there and once I got everything I just do the bill and that’s when I show you guys the build on RUclips. Have a great night.
@@collinderby4182 Hi this has been a while since I built this not sure what part you are referring to sorry. thanks for checking out the videos and checking out the channel. I appreciate that.
Hi, yes I used Lexan paint and then I backed it with a clear you can find on eBay or at your local hobby store might have it but I get mine from eBay. I think it’s a spastics or just put in candy apple orange paint and something will come up that’s all you need, thanks for checking out the videos and thank you for the comment💯👍🏾
@@jaimerodriguez8456 just clean real good with alcohol. If you have any primer just put a very light coat of primer and then spray you can spray 34 coats wait about 1015 minutes in between the coats and then after it’s fully dry just spray about 2 to 3 coats of clear on it you should be good more coats of candy apple you spray the darker it’s gonna come out. Just remember that that’s it. Thanks.
Nice one :) I just found out that both rear sway bars or stabilizers had broken clean of the "A-arm" on my Lasernut. Is this a known weak-spot? I have had trouble opening the "hood" or body to change batteries as it all seemed very tight. Perhaps I actually broke the sway bar myself because it was hindering the opening.
Hi and glad you were able to find the sway bars. Yeah it is a tight fit back there so you really gotta be careful when opening the body sometimes you have to push the body in to clear the sway bars so be careful. Thanks for checking out the video.💯👍🏾
Looks great! I'm going through pretty much the same thing. Where do you get the metal turnbuckle ends? I keep breaking the front offset steering ends that you can't get separately that I can find anyway.
Thanks for the comment you can find those rod ends on eBay or Amazon but just to let you know you will need to shim them because the pillow balls are a little loose other than that you’re good to go thanks for checking out the Vids and support
That is awesome, I have two of these. One is DOA, been using it for parts. Has a messed up center differential. Even though I have parts I can't get the diff case open. So I bought another one which I run now. Been slowly upgrading with Vitavon parts. I wish I knew where to find a good RC mechanic so I can fix my other one. ✌🏽
Thanks for the comment yes if the screws are stripped out u can get a drill and drill the head off the screw then use pliers to remove the threads if that’s the situation 💯👍🏾
@@rcsfinest1883 , right on, they are the little dimpled Allen bolts. And yeah there's three out of the five that are stripped. I'm pretty sure I can take a Dremel and put a slit through the top and then use a screwdriver. I'm thinking seriously of just buying a new Vitavon center DIff. Plus my front diff is leaking too. Might as well do both. I'm thinking seriously of turning one into a showpiece. And the other one i'll continue to bash.
@@jkitto2008 yes cut a slit in it use a screw driver also that works yes u have two one a basher and one a shelf Queen or a street and grass racer like mine 💯👍🏾
Well, really just like everything else with aluminum upgrades they have their limits they will bend and break if you crash I don’t care if it’s Vivan I don’t care if it’s Exotec I don’t care if it’s plastic everything has a limit never use Viviton stuff so I can’t tell you, but I’ve use a lot of GPM parts. Just look at my channel. Look at all the cars I built. Thanks for the comment. Thanks for the question. Thanks for checking out the channel and the video. Have a good day.
Thanks for the comment but i wouldnt recommend locking the diffs cause if you land on the throttle you will most likely blow the diff out i put 1mil ot 2mil for some slipage you need some give thanks for checking out the video..
Not sure about that. I used a 42,75 or 4274 one a scale motor 2200 KV change everything over to mod one gears. Thanks for checking out the video and thanks for the comment.💯👍🏾
Hey bro where’d you find the tie rod ends? I’m only finding right hand thread sets! half of these on the truck are left hand thread! Keep up the good work bro and thanks for replying!🤟🏼😎
Thanks man for the kind words and checking out the vids I found on eBay or Amazon but the ones I purchased had a lot of slop on the pillow balls so I had to shim them up thanks 🙏🏾💯👍🏾
Yes thanks for the comment it’s a little heavy but not to bad I don’t do any crazy bashing so it holding up pretty good thanks for checking out the video 💯👍🏾
@@SmilingNightSkyline-rx3nk yes sir thanks for checking out the videos. Yes they are really tough. Mine hasn’t had any big issues yet. Couple of hard crashes just body damage but nothing mechanical or like that so yeah thanks for checking out the channel. Appreciate it. Have a blessed day.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Sickest laser nut I’ve seen. Good job. These are exactly the type of builds I like.🔥
Awesome glad you like the video and I’m thankful that you stop by the channel and checking out the videos. Appreciate you. Have a good day. God bless.💯👍🏾
Good looking ride! I’m slowly but surely upgrading mine! I upgrade mine as I break it…lol.
Yes, I totally understand. I just upgraded everything before it breaks even though it might not break. It’s just a habit of mine. Thanks for checking out the video. Thanks for stopping by the channel. Have a blessed day.💯👍🏾
Great looking build! That’s how it’s supposed to be done!! I’m building a DB Pro right now with pretty much the same upgrades. I tried the aluminum rod ends but they break way too easy.
I enjoyed your video thoroughly.
Keep pulling those triggers
Yessir thank you for the kind words and thank you for checking out the video Yeah so far I haven’t had any problems with anything breaking on this I don’t do a whole bunch of crazy bashing just open park runs and street runs an open field. I’m not a big jumper. I just love to build thank you. Have a great afternoon.🙏🏾💯👍🏾
Nice looking I’ve been using gpm parts lately most of the parts are 7075 aluminum Very tough And they look good GPM has come along way
@@geraldchilders2625 yes for sure. I use a lot of GPM parts and a lot of my builds because it color coordinates with what I’m doing. I’m not a big basher. I just like to do open fields and street runs so that’s perfect for me. Thanks for the comment. Thanks for checking out the video appreciate you have an awesome day. God bless.
For sure it’s nice build hopping to get mine there soon
@@geraldchilders2625 thank you yeah take your time. Just do a little stuff at a time. That’s what I do. I just buy parts here and there and once I got everything I just do the bill and that’s when I show you guys the build on RUclips. Have a great night.
Very nice build your hard work and dedication speaks for itself 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Thank you I’m glad you like the build and thanks for the continued support God Bless 🙏🏾💯👍🏾
Please let me know how you removed that snap ring during the sway bar install? Love what you did with her nice build man!
@@collinderby4182 Hi this has been a while since I built this not sure what part you are referring to sorry. thanks for checking out the videos and checking out the channel. I appreciate that.
awesome looking rc and great review
Thanks Duke for the support have a Awsome day 💯👍🏾
Love the car. Just received mine. What kind of paint did you use and where can I find the candy apple orange color?
Hi, yes I used Lexan paint and then I backed it with a clear you can find on eBay or at your local hobby store might have it but I get mine from eBay. I think it’s a spastics or just put in candy apple orange paint and something will come up that’s all you need, thanks for checking out the videos and thank you for the comment💯👍🏾
I found the paint and clear coat. What all did you do to prep the wheels for paint? Also how many coats on paint?
@@jaimerodriguez8456 just clean real good with alcohol. If you have any primer just put a very light coat of primer and then spray you can spray 34 coats wait about 1015 minutes in between the coats and then after it’s fully dry just spray about 2 to 3 coats of clear on it you should be good more coats of candy apple you spray the darker it’s gonna come out. Just remember that that’s it. Thanks.
Great channel bud subscribed 🙌🏻🔥🔥
Thanks bud for checking out the vids and the sub I appreciate you 🙏🏾💯👍🏾
Nice one :) I just found out that both rear sway bars or stabilizers had broken clean of the "A-arm" on my Lasernut. Is this a known weak-spot? I have had trouble opening the "hood" or body to change batteries as it all seemed very tight. Perhaps I actually broke the sway bar myself because it was hindering the opening.
Hi and glad you were able to find the sway bars. Yeah it is a tight fit back there so you really gotta be careful when opening the body sometimes you have to push the body in to clear the sway bars so be careful. Thanks for checking out the video.💯👍🏾
Beautiful build bro!
Thank you I appreciate the positive feedback I appreciate you bro thanks for checking out the video 🙏🏾💯👍🏾
Looks great! I'm going through pretty much the same thing. Where do you get the metal turnbuckle ends? I keep breaking the front offset steering ends that you can't get separately that I can find anyway.
Thanks for the comment you can find those rod ends on eBay or Amazon but just to let you know you will need to shim them because the pillow balls are a little loose other than that you’re good to go thanks for checking out the Vids and support
Nice thinking of getting this LLU4, then eventually upgrade the parts, I would love to add an FPV camera on it ....enough room?
For sure there will be enough room for extra electronics and stuff. Might be a tight squeeze tho
That is awesome, I have two of these. One is DOA, been using it for parts. Has a messed up center differential. Even though I have parts I can't get the diff case open. So I bought another one which I run now. Been slowly upgrading with Vitavon parts. I wish I knew where to find a good RC mechanic so I can fix my other one. ✌🏽
Thanks for the comment yes if the screws are stripped out u can get a drill and drill the head off the screw then use pliers to remove the threads if that’s the situation 💯👍🏾
@@rcsfinest1883 , right on, they are the little dimpled Allen bolts. And yeah there's three out of the five that are stripped. I'm pretty sure I can take a Dremel and put a slit through the top and then use a screwdriver. I'm thinking seriously of just buying a new Vitavon center DIff. Plus my front diff is leaking too. Might as well do both. I'm thinking seriously of turning one into a showpiece. And the other one i'll continue to bash.
@@rcsfinest1883 , they sure are a lot of fun though. When they're running right my goodness don't do things get up and go. ✨🌬💨❕
@@jkitto2008 yes cut a slit in it use a screw driver also that works yes u have two one a basher and one a shelf Queen or a street and grass racer like mine 💯👍🏾
Are you using the stock differentials with all that power? I keep breaking my rear differential with 3s. Any upgrades on the differentials?
@@victoregonzalez8512 yes I’m still using the stock diss. I just put 200 K in the diffs and it seems to be working pretty good.
How have the gpm parts held up? Are the a good choice over exotek and vitavon parts?
Well, really just like everything else with aluminum upgrades they have their limits they will bend and break if you crash I don’t care if it’s Vivan I don’t care if it’s Exotec I don’t care if it’s plastic everything has a limit never use Viviton stuff so I can’t tell you, but I’ve use a lot of GPM parts. Just look at my channel. Look at all the cars I built. Thanks for the comment. Thanks for the question. Thanks for checking out the channel and the video. Have a good day.
Since you worked on the diffs, is it possible to lock the diffs with any of the lockers on the market?
Thanks for the comment but i wouldnt recommend locking the diffs cause if you land on the throttle you will most likely blow the diff out i put 1mil ot 2mil for some slipage you need some give thanks for checking out the video..
Looking awesome
Thanks I’m trying to bring Awsome content with different builds for the channel thanks for all your support I appreciate you 🙏🏾💯👍🏾
Where do you find motors for this, it's a 4 mm shaft? I want to 3200kv or higher.
Not sure about that. I used a 42,75 or 4274 one a scale motor 2200 KV change everything over to mod one gears. Thanks for checking out the video and thanks for the comment.💯👍🏾
Hey bro where’d you find the tie rod ends? I’m only finding right hand thread sets! half of these on the truck are left hand thread! Keep up the good work bro and thanks for replying!🤟🏼😎
Thanks man for the kind words and checking out the vids I found on eBay or Amazon but the ones I purchased had a lot of slop on the pillow balls so I had to shim them up thanks 🙏🏾💯👍🏾
Hey man, what shocks are those?
Those are big bore aluminum shocks for the lasernut got off of eBay 💯👍🏾
@@rcsfinest1883 thank you
Lasernut is a beauty bro👌👍👌
Thanks for the kind words and checking out the vids and the support 💯🙏🏾👍🏾
Looks great but man thats gotta be heavy😂
Yes thanks for the comment it’s a little heavy but not to bad I don’t do any crazy bashing so it holding up pretty good thanks for checking out the video 💯👍🏾
@@rcsfinest1883yea my stock laser nut is tuff crashed into 2 bricks and a tree at almost full speed lol
@@SmilingNightSkyline-rx3nk yes sir thanks for checking out the videos. Yes they are really tough. Mine hasn’t had any big issues yet. Couple of hard crashes just body damage but nothing mechanical or like that so yeah thanks for checking out the channel. Appreciate it. Have a blessed day.
Beautiful work friend!!👍
Thanks boss we are going to keep pushing for 2022 thanks for your support appreciate you 🙏🏾💯👍🏾
@@rcsfinest1883 you're welcome!!😃