natas nnellaf i almost got this instead of the Helix just to save from dough but i couldn't ever try one out. I'm definitely happy with my Helix but this thing actually has me impressed. Mooer is a great company
Those shroom hats are a must for you not to accidentally hit the small buttons with your foot. I'd say it can work just fine as long as you-re a bit careful not to hit the wrong switch :)
what really annoys me is the nasty gap when turning on effects. It's not a patch change, guys, it's a simple effect being turned on and the sound goes dead for about 3 or 4 ms.
Dimitris two different approaches. The Ge200 is more versatile on its own, but the amplifirebox runs like a real amp and you can use the pedals you have
ChoptonesOfficial thanks man... mines on its way...... could you please suggest /recommend some good IRs for the amps on the GE200...... if possible make a video on it next..... thanks again...
Is it possible to activate the wah pedal on/off with longpress of the expresion pedal like in the Digitech RP360XP? I also use a power amp , al the mix comes out from my multi effect processor stereo outputs to the effects return of my amp, can this be achieved with the GE200? Thank you, best regards.
If you play with the delay time while sound is coming through, does it do that pitch bend effect like a true analog delay? And if so, can it be made to self oscillate with the feedback at 100?
The fretboard on that Ibanez is so light that when I looked at the thumbnail I thought it had a maple fretboard. Is that the Jatoba stuff Ibanez is using now instead of Rosewood?
Can this be used like the NUX Cerberus, where you can hit the buttons as pedals? For example, I may have a song where I start with light distortion, chorus, and wha, then in the middle phaser, HEAVY distortion and no wha, etc, back and forth. How do you do it on one of these? For a multi effect song, doo you have to set a "preset" such as Preset 1 (distortion1,chorus,wha), then Preset 2 (Heavy Dist,Chorus,), Preset 3.., etc?
Actually for the question re iOS it’s exactly the other way round. If the USB interface on the ge-200 is USB audio core compliant then it doesn’t need any special drivers installed on Windows or MacOS and just plugging it into a USB port will let the computer see it as an audio device (a bit like just plugging a camera into a PC allows you to access the photos on the SD card with no extra drivers required - just plug it in and it works). For Windows and Mac this isn’t really that critical because even if the onboard firmware on the device isn’t presenting a core-compliant USB interface the manufacturer can and almost always does provide a driver for the platforms that they support. For iOS though there is no way to install additional device drivers so if the ge-200’s USB interface isn’t core compliant then you’re stuffed, if it is core compliant then it should just plug into an iPad or iPhone via a standard Apple camera adapter and just work. Now, as to the answer, I don’t know but basically if you have to install a special USB driver to talk to it in Windows then it is likely not Core compliant and won’t work with iOS, if however no special USB driver is required in Windows then it likely will work with iOS. As examples of it done right and wrong Line 6 tend to implement Core compliant USB devices so an AmpliFi (for instance) does just plug into an iPad via an Apple camera adapter and is automatically recognised as an audio device (I do this all the time so know it works). Boss however, unless they’ve fixed this with a firmware release recently, don’t implement a Core compliant USB interface on the Katana Air so I suspect that won’t work with iOS (and is why I cancelled my order). I’d love to know the answer to this from someone who’s actually got a ge-200 and the necessary Apple/iOS stuff to try it out though rather than my theoretical ramblings.
Bought it a month ago, just usb-plugged it in my Mac and it works fine. No specific driver or software needed. Just plug and play, GarageBand or any DAW.
The Killer feature in the GE200 is the possibility to load third part IRs in the device, giving a great quality to the whole tone. I could tell you that we prefer the Zoom, but the IR loading is a must nowadays, so Mooer is the answer.
Porque toda comparacion es metal? Rasgueos tipo funky y limpios con presencia con un empuje de overdrive realmente permiten ver si el sonido es mas orgánico y real o mas digital
You could use this live without anything else. Stereo output to a mixer even. I still don't trust a usb interface for stable live use. I think that's why the bias head is there
The only substantially better sounding physical amp modellers are literally 3x the cost (and that's the cheaper units), so actually it's kind of a no-brainer for the guitarist on a budget lol
This is really funny. It's definitely ROSEWOOD, just a little bit dry and with lights looks lighter than the reality. Next time be careful with Fake word ;)
I'm a bass player/recording&mixing enthusiast...this thingy is ideal for me! Thanks for this great review it made me decide to go for it.
This is the best sounding run through I've come across on RUclips. Kudos.
The sound of this little thing is actually impressing me. The rectifier model sounds better than the one in Helix Native to my ears.
Sounds better than my PODXT Live.....which I will always keep for nostalgic reasons.
I enjoy watching the Titan Ibanez. Cool guitar.
Wow not bad. Not bad at all. For the price point that's actually pretty damn good
It's excellent at this price point.
natas nnellaf i almost got this instead of the Helix just to save from dough but i couldn't ever try one out. I'm definitely happy with my Helix but this thing actually has me impressed. Mooer is a great company
That Jake Bowen guitar will forever be an only dream for me. 😭😭😭
Great play-through, thanks!
Awesome test, guys ;)
Saw this product & how small this is yesterday at the guitar shop. Hard to imagine playing with this thing live
Those shroom hats are a must for you not to accidentally hit the small buttons with your foot. I'd say it can work just fine as long as you-re a bit careful not to hit the wrong switch :)
Hello! Nice playing! I have a question, is it possible to connect mooer directly to active monitors? Or do I need a sound card before?
what really annoys me is the nasty gap when turning on effects. It's not a patch change, guys, it's a simple effect being turned on and the sound goes dead for about 3 or 4 ms.
whoooaa thank for that one !! u rock \m/
Thanks for support!! Don't forget to subscribe to be updated! :)
It sounds good really, i didnt expected that for sure...now im confused what i wanna buy...
Did you use the stock Impulses in this test, or some of your choptone impulses?
This Jake Bowen is so damn sexy.
+HateCreation Stock cabs
Great Demo . Is it best to run the GE 200 through the effects loop of my amp or into the front ? . Thanks
In this demo we've recorded L/R outputs. No amp
@@ChopTonesOfficial how you record?
Hey there, great demo.
Would you recommend this unit or the Atomic Ampli Firebox?
Thank you in advance
Dimitris two different approaches. The Ge200 is more versatile on its own, but the amplifirebox runs like a real amp and you can use the pedals you have
So, can you load patches into it like you would on the Headrush, Line 6, DV Mark, etc?
+TheGuitar Person Yes!
ChoptonesOfficial but how?
Mooer Studio editor, available on Mooer website
ChoptonesOfficial thanks man... mines on its way...... could you please suggest /recommend some good IRs for the amps on the GE200...... if possible make a video on it next..... thanks again...
Choptones IRs for sure ;) shop.choptones.net/cab-ir
Is it possible to activate the wah pedal on/off with longpress of the expresion pedal like in the Digitech RP360XP? I also use a power amp , al the mix comes out from my multi effect processor stereo outputs to the effects return of my amp, can this be achieved with the GE200? Thank you, best regards.
If you play with the delay time while sound is coming through, does it do that pitch bend effect like a true analog delay? And if so, can it be made to self oscillate with the feedback at 100?
Yes, it reacts like a real analog delay!
The fretboard on that Ibanez is so light that when I looked at the thumbnail I thought it had a maple fretboard. Is that the Jatoba stuff Ibanez is using now instead of Rosewood?
Can this be used like the NUX Cerberus, where you can hit the buttons as pedals? For example, I may have a song where I start with light distortion, chorus, and wha, then in the middle phaser, HEAVY distortion and no wha, etc, back and forth. How do you do it on one of these? For a multi effect song, doo you have to set a "preset" such as Preset 1 (distortion1,chorus,wha), then Preset 2 (Heavy Dist,Chorus,), Preset 3.., etc?
Watch this... another mooer Multi-effector... ruclips.net/video/F0jTvjH_dIY/видео.html
In which way it’s possibile to change the volume for the headphone during the use?
Should I buy this to replace my pod hd500?
Does it have double track panoramer? 30ms between two channels
Can I use it as a audio interface for iOS?
Stainless Steel I’m wondering the same thing. Can this be run direct into studio monitors?
Apparently we’ll never know
If there's a driver, yes, it's an interface.
Actually for the question re iOS it’s exactly the other way round. If the USB interface on the ge-200 is USB audio core compliant then it doesn’t need any special drivers installed on Windows or MacOS and just plugging it into a USB port will let the computer see it as an audio device (a bit like just plugging a camera into a PC allows you to access the photos on the SD card with no extra drivers required - just plug it in and it works). For Windows and Mac this isn’t really that critical because even if the onboard firmware on the device isn’t presenting a core-compliant USB interface the manufacturer can and almost always does provide a driver for the platforms that they support. For iOS though there is no way to install additional device drivers so if the ge-200’s USB interface isn’t core compliant then you’re stuffed, if it is core compliant then it should just plug into an iPad or iPhone via a standard Apple camera adapter and just work. Now, as to the answer, I don’t know but basically if you have to install a special USB driver to talk to it in Windows then it is likely not Core compliant and won’t work with iOS, if however no special USB driver is required in Windows then it likely will work with iOS. As examples of it done right and wrong Line 6 tend to implement Core compliant USB devices so an AmpliFi (for instance) does just plug into an iPad via an Apple camera adapter and is automatically recognised as an audio device (I do this all the time so know it works). Boss however, unless they’ve fixed this with a firmware release recently, don’t implement a Core compliant USB interface on the Katana Air so I suspect that won’t work with iOS (and is why I cancelled my order). I’d love to know the answer to this from someone who’s actually got a ge-200 and the necessary Apple/iOS stuff to try it out though rather than my theoretical ramblings.
Bought it a month ago, just usb-plugged it in my Mac and it works fine. No specific driver or software needed. Just plug and play, GarageBand or any DAW.
which one do u think better for hi gain in mooer ge 200/zoomg3xn/boss gt1?
The Killer feature in the GE200 is the possibility to load third part IRs in the device, giving a great quality to the whole tone. I could tell you that we prefer the Zoom, but the IR loading is a must nowadays, so Mooer is the answer.
ChoptonesOfficial and for crunch and clean sounds wich will better? zoom or mooer?
1000 likes for a video comparison :D
compare with GT-1 too !
Arkava Goswami zoom is the best
Everything straight in to the interface?
awesome
what name/series your ibanez ?
Anyone know of a comparison between this and the Digitech RP360XP?
Is this better or the same as the Zoom G3XN?
Check our comparison video! :)
Is there any bass stuff in there ?
0:35 "oh God imma just switch that, you heard nothing"
lol he just added a cab sim
It was playing through without a cab sim is all.
Suppose I can't really ask yous to go through a ampli-firebox since it's just be a smaller 3/12 :'(
Check our Amplifire demos, they're based almost on the same sound engine ;)
please demo the Line 6 helix HX effects using its own cabinet impulse response
We'll surely do in the next future!
ChoptonesOfficial thanks man. Appreciate it.also please include Amplifi TT if you don't mind. Thanks
Porque toda comparacion es metal? Rasgueos tipo funky y limpios con presencia con un empuje de overdrive realmente permiten ver si el sonido es mas orgánico y real o mas digital
+TotoNunezSalas why you don’t watch the all video? Not only metal...
ChoptonesOfficial yeah you were right!
Por qué no miras el vídeo entero? Hay muestras de los presets limpios también, Ceeo que hace una buena Review
masterfuert Carlos Alcaide. Si es muy cierto lo mire hasta el final y es diferente. Muy buen review
oou by
I want to like it, but I hear some fizziness that just can’t be ignored. Maybe it’s my speakers.
This things fizzier than a can of soda
HankCScorpio same shit, its maybe the interface ir the damn presents
fizzy when cab sim is not on - but thats a thing
its just the cab sim which can be changed
Dump 4k on the eq about 6db......thank me later.
Actually, dump 4k on any guitar amp you use
Sounds terrible.
You can get BIAS FX pro for $150. Why would anyone in their right mind buy one of these for twice the price
Michael Gattone ...latency
Michael Gattone because it’s a pedal.
You can use it as part of your amp rig.
It’s a little more portable than your entire pc rig.
Michael Gattone iii
You could use this live without anything else. Stereo output to a mixer even. I still don't trust a usb interface for stable live use. I think that's why the bias head is there
The only substantially better sounding physical amp modellers are literally 3x the cost (and that's the cheaper units), so actually it's kind of a no-brainer for the guitarist on a budget lol
This is a totally FAKE Jake Bowen signature Ibanez, them have ebony fingerboard, this Is clearly no right!
This is really funny. It's definitely ROSEWOOD, just a little bit dry and with lights looks lighter than the reality. Next time be careful with Fake word ;)
it's the indonesian made premium model...