From a woodworking standpoint, you could make the joints, as lap-joints, or a traditional dado joint, for boxes. It provides more area for glue, thus making the joints stronger. And if it should ever fail, at the joints, is usually where, and you don't want any of your little friends getting out, especially if you have hots, like I do. But great video.
I think the goal of these videos is to help people with minimal tools and experience building. I was groaning when he didn't even bother with miter cuts, then i saw the burn marks left by his circ and realized he probably never sharpened or replaced the blade. Definitely some basic skills could make it better, but it might make people wonder what to do if they cant follow along. He pulled that router out though.
Love your plywood builds. This one is shaping up to be an impressive tank. My favourite is still the big tank you built in one of your videos with the base of plywood and sides of glass and using the barrels as a fluidized filter. It was impressive, a dream tank. I love aquascaping and can only imagine how that could have looked planted. Keep it up joey.
You and your videos are seriously the best... I can just continue watching it over and over again, and get new ideas each time I watch it... Thanks Joey for sharing such valuable information...
Really enjoying your improved videography skills. The transitions and camera slider really add an extra layer of intricacy that not everyone picks up on. Keep up the great video work and editing! We all know the projects will continue to be excellent.
Sean Williams Its hard to invest in any good equipment when you do videos like i do. being the camera man, the builder and presenter... it is easy to destroy equipment. Im constantly covered in epoxy, paint, silicone, etc... Even knocking my camera over once and shattered a lens. So while i do aim to improve, im limited to being a one man show. (PS: I also ruined the slider I used in this video. I got epoxy all over the rails). Its not that im not careful, but when the clock is ticking and you are worried not only about building correctly so that you dont end up with 370 gallons of water on the floor... Its tough to still get good angles, show everything, etc.. It can be a nightmare sometimes to film a project. Glad you noticed some improvement. :)
The Graceful Savage Well, I am only an aquarium hobbyist. Filming, editing, speaking, etc... was never part of the plan... So with time, i am learning to get better. :)
+Chaz “The Dragon Master” Morris once sealed correctly. it can last anywhere from 20 to 500 years. I'm not kidding. with little modification this design could be used as an out door tank. sealing and painting correctly at construction is essential for longevity.
Bob Villa of fish tanks! God bless you brother. I love all your tips & knowledge, one thing I would like to add is when you wipe the glue off when it's wet it is absolutely so much easier. Yes sanding off is one way to handle it but much more work. Also the glue rejects the stain, especially in the cracks. You never want to sand veneer to much.
Just a tip from a person who is doing this build. I am following his build as much as possible. A pro tip is DO NOT let the wood glue sit. Sanding is extremely difficult around the seams. When glue is wet wipe away. Sanding is extremely difficult.
Built several of these back in mid 70’s, but not as finished out as yours. Used marine epoxy paint from Sears for the sealer. As far as I know, one is still in use. Brought back memories, thanks
Builds plywood tank with 10 gallons of dripping wood glue on hardwood floor... Great video explaining everything in amazing detail. Will be building a plywood home for my Bearded dragon soon.
Very good building slills. This comes with extra thaught, and a good build. For space and materials, probabbly the best plywood aquarium I've seen. For what it's purpose is for.
You have changed over the past three years... from "teacher" to the regular guy showing how he's doing it and a friend of us all! It's you, no doubt, but your 2018 presentations are a lot better!
lupo10 Thanks pal. The rest of this series will look like this one, however i did end up adding in another camera for different perspectives in the videos to follow. So i would suspect they will get better as they go.(this series anyways). Im not sure though, as i have not gotten to editing them yet.
Nice work, but I think it could be done more efficiently. Why us the wood screws? They have very little holding power compared to epoxy glue. Screws can hold hundreds of pounds but epoxy can hold thousands of pounds per square inch and you have a lot of square inches. Why not use epoxy glue? It is stronger than wood glue and it is waterproof. Since you are coating plywood with epoxy, coat the wood with epoxy before assembly. Then, while the coating is still tacky, glue the panels together. Further, sealing the corners with silicone is unnecessary. You can do that with epoxy and thickener. I would also reinforce the corners with fibreglass on the inside. That will make a corner much stronger than wood glue and screws.
Love your video, using your basic foundation details I built my very own aquarium. Thanks to you I now own a 20' x 2' x 4' tank in a rectangular shape on a 2 1/2' base. It's awesome and my koi love it.
You have inspired me to do my own plywood aquarium. A little description for you, I’m going to build a 500 gallon in my basement. When I’m done it will look like it is in the wall. Thanks for your videos, very professional.
Awesome idea. Im going to start building reptile enclosures for sale soon. Now my thought on all these wood tanks and enclosures is there is a little too much time and money put into trying to seal them water tight. Wouldn't just be easier to paint the wood with whatever color you wanted then box it all in with plexiglass and silicone with a piece of real glass for the front. 😎
Awesome series. Cannot wait to see it trimmed, stained / painted, and finished. I think it would be cool to have a canopy with hinged access panels for feeding, and mounting the light inside as well. Once all done and on a matching stand, it will look amazing, Excited!
I’m actually trying to get a bearded dragon…… But I find the terrarium prices way too steep. Watched your “how to build a glass aquarium” video before this…… This is an even better idea!!!!
If you plan to STAIN the plywood you HAVE to wipe the glue off with a wet rag right away! Or the stain won't stain the glue, it will look like shiny wood where the glue is.
I thought that too - and even though he said he would sand it away, it looked like he wiped it all off first. I was also surprised ho little the glue oozed out considering he was generous with the application. All in all - this is a GREAT DIY Video.
Wiping actual will spread the glues sealing a larger area of wood fiber. In my experience as a woodworker I’ve had better results letting the glue dry and using a sharp chisel to remove the dry glue flush at the surface. It takes very little sanding at that point and once sanding the sealed layer of fibers off stain takes easily.
***** Joey thank you so much for the videos that you post! They have been immensely helpful while I built my 300 gallon plywood bottom tank. You are plumb full of great advise. If you get time please check out my channel "goatschilling" and let me know what you think.
TheMFLAV If an in wall tank is what you are after and it doesnt matter what the tank look like, then this is by FAR the most cost effective way to build.
Awesome job, just have to talk my wife into letting me build an aquarium; I have been out of keeping tropical fish for about 8 years. I come from a construction background. A couple of things that I noticed about your build and technique. 1. Looking at the burn marks on your plywood it is generally an indication that the saw blade is dull and needs to be replaced or resharpened. 2. When applying wood glue from a bottle instead of `pulling` the glue bottle - try pushing the glue bottle. This technique will result in two small beads of glue instead of one - it gives better coverage. 3. Robertson screws are the only way to go!
Not that you need suggestions, but for anyone else who is going to build this. 1. Pocket holes work great on plywood for anchoring pieces together and will stop any kind of expansion gaps that spread the boards apart over time. 2. You can wipe away glue squeeze-out with a wet rag to avoid sanding and ruining the finish. 3. Wood glue bonding is based on surface area not thickness (to a degree) so you can spread out the glue with an even and full coat by using an old gift card. 4. Don't use construction grade plywood for this as it has major voids and will not have the integrity to hold up over time. Just get the good stuff.
It's looking really nice Joey. I can't wait to see the it finnish. 40 years ago I made a 55 gallon plexiglass tank and I did the corner overlap just like you did. I did the stip's 1 inch so it gave the tank as if it had a frame around the corners. The strips were black and I polish all the ends even the tank. Thanks for sharing.
I've never had or even seen a plywood aquarium before. It does seem as an interesting alternative to the more conventional glass or acrylic box - can see how this may work in large aquarium. Your DIY videos are excellent and always enjoyable to watch. A hello from the other side of the pond from the rock of Gibraltar. LoL.
Keith Howard Plwood tanks are certainly under rated and not built nearly enough. I suppose that is part of the reason i am showing a new one. That, and i need it. haha
I'll remember that as a good argumenrt for the wife when i venture into another project myself. Thanks for the reply and thanks for your prompt response.
For the wood screws you used. Would those be effective when screwing together malomine(sp)? Or would they crack the malomine? If I didn't have to drill pilot holes that would be alot simpler for the enclosure I'm planning to bulid
I really like the plywood tank, and I really like how you used the router to route the edges. only one thing, you were going back wards. Normally for the direction of the blade you would cut from left to right, with the router vertical. Just take in to consideration witch way the material is facing. For harder woods like oak run in reverse like you were doing for a nice clean cut. Just a tip. You are the man. Your videos are great, and you have been a big help. Keep it up bro. thanks
I always pay attention to your videos. They are always very well done. Besides my grow videos that I watch. I pass lots of time picking up what you are laying down.
Joey, I have an old 55 gallon tank that I have been debating on turning into 2 plywood tanks. I was thinking about increasing the capacity to 75 gallons. Will the glass work for that?
Would you be able to do an update video on how this tank lasted long or if it didn’t last or any thing you would have changed about the way you built it
Great job, great video only thing I would have done is use the kregs pocket hole jig and screw them all along the bottom length and width top also even the front panel to put together, either way you did a superb job
tip. you can wipe the exesive glue with a wet cloth remember not to throw the cloth on the floor wen the water dries the cloth wil be gluet to the floor and leave white stains
Hi Joey, I’m just wondering how long this has lasted? Is it still used or did it need any repairs etc. would love and update. Looking to start this asap. Thank you ❤
awesome set of videos, Im looking at building a large vivarium for a Chinese Water Dragon and find myself viewing this video a lot. my enclosure will easily double this size but wont need near the amount of bracing because it isnt holding water like an aquarium would but will have a 33 gallon pool on the bottom for swimming so for moisture I am definitely using pond shield, the pool will have an external aquarium filter cycling water for freshness though, thinking of using concrete for background/pool with a waterfall but not sure just yet, just have to get the box built and sliding glass panels for the front door. Great job btw! you have already given me many ideas as to starting this project!
Awesome job bro. So far so good. Seeing from the pics online it came out amazing. Thanks for sharing your beautiful setup. Your Arrowana is gonna love that tank. 👍
Hi! Awesome tutorial, can you explain where you get the actual tank for inside or where you source the glass? I want to upgrade my red eared slider’s tank to one this size but can’t find any tanks that seem to be as large as I want under 7-8k.
I seen an older wood aquarium build that u made which is very different as installing top.and botom on the outside and using liquid membrane. Do u still think liquid membrame is a good option or better to use pond waterproofing as liquid membrane is so much easier to use ?
I watched this video years ago. My turtle needs a bigger tank so thought it was a good choice also my plan for a front pannel is going to be a old glass sliding door is this a good idea or am I making a huge mistake?
5 years later. Is this tank still going strong? Is this the same tank you covered with Styrofoam that looked like Bricks? You should be Syndicated. I would watch every episode faithfully. You are truly the official King of DIY.
I need this! My girl wants a big salt water tank, she wants a lionfish, son wants a porcupine puffer so needs to be big, will definitely be watching closely for more updates, one question, would it be bad to have the side viewing panel without the wood, like a bare corner and to silicone the glass?
Joey I'm trying to build a wall divider fish tank utilizing your plans for a plywood tank can there be viewing panels on both sides and still be structurally safe?
great job as always i think i might tackle a similar project for my reptiles and use a sliding glass door instead of a glass viewing panel... awesome work!
You pretty much hold our hand and show us how to do everything easily in all your videos! Now I just wish I had my own house to take one a project like this. Thank you so much for all your DIY videos!
Oscar Segundo Well, in all honesty... I film the videos in a way that I like to learn. I need details. I need to see everything. I need to know everything. I need it explained in simple terms. I try to do that in my videos. I suppose i lucked out and reached so many other people that enjoy learning in the same manner i like to.
Long live the King (of DIY); been watching your videos for over 5 years now:
Thank You Joey!
From a woodworking standpoint, you could make the joints, as lap-joints, or a traditional dado joint, for boxes. It provides more area for glue, thus making the joints stronger. And if it should ever fail, at the joints, is usually where, and you don't want any of your little friends getting out, especially if you have hots, like I do. But great video.
Isn't this a crazy under build? 340!
I think the goal of these videos is to help people with minimal tools and experience building. I was groaning when he didn't even bother with miter cuts, then i saw the burn marks left by his circ and realized he probably never sharpened or replaced the blade. Definitely some basic skills could make it better, but it might make people wonder what to do if they cant follow along. He pulled that router out though.
J Why you always make me [us] feel that there is so much that can be done with aquariums and life?
Great job. God speed!
Love your plywood builds.
This one is shaping up to be an impressive tank.
My favourite is still the big tank you built in one of your videos with the base of plywood and sides of glass and using the barrels as a fluidized filter.
It was impressive, a dream tank.
I love aquascaping and can only imagine how that could have looked planted.
Keep it up joey.
Aquamaniac That was an awesome tank wasn't it?
Oh man. A corded drill? I haven't seen those in years.
Crazy how much things can change in 8 years.
You are certainly the King of DIY, my friend. I love your creativity and out of the box thinking.
You and your videos are seriously the best... I can just continue watching it over and over again, and get new ideas each time I watch it... Thanks Joey for sharing such valuable information...
Really enjoying your improved videography skills. The transitions and camera slider really add an extra layer of intricacy that not everyone picks up on. Keep up the great video work and editing! We all know the projects will continue to be excellent.
Sean Williams Agreed, this channel has come a long way. Even compared to a year ago, its noticeably a better quality and consistency
Sean Williams Its hard to invest in any good equipment when you do videos like i do. being the camera man, the builder and presenter... it is easy to destroy equipment. Im constantly covered in epoxy, paint, silicone, etc... Even knocking my camera over once and shattered a lens. So while i do aim to improve, im limited to being a one man show. (PS: I also ruined the slider I used in this video. I got epoxy all over the rails). Its not that im not careful, but when the clock is ticking and you are worried not only about building correctly so that you dont end up with 370 gallons of water on the floor... Its tough to still get good angles, show everything, etc.. It can be a nightmare sometimes to film a project. Glad you noticed some improvement. :)
The Graceful Savage Well, I am only an aquarium hobbyist. Filming, editing, speaking, etc... was never part of the plan... So with time, i am learning to get better. :)
Great build: solid, straightforward, and approachable. Oh yeah, and the aquarium looks good, too!
part 2: ruclips.net/video/dS6AJL3CAt0/видео.html
+Mr.b fluval is a good brand
being made of plywood does it last long?
+Chaz “The Dragon Master” Morris
once sealed correctly. it can last anywhere from 20 to 500 years.
I'm not kidding.
with little modification this design could be used as an out door tank.
sealing and painting correctly at construction is essential for longevity.
+Chaz “The Dragon Master” Morris
part two will show you the sealing process.
what is the size of your aquarium?
Bob Villa of fish tanks! God bless you brother. I love all your tips & knowledge, one thing I would like to add is when you wipe the glue off when it's wet it is absolutely so much easier. Yes sanding off is one way to handle it but much more work. Also the glue rejects the stain, especially in the cracks. You never want to sand veneer to much.
You never let me down, Fired Up!!! Been curious on plywood tanks. This looks great and your not even finished.
Slim Tim It actually has a long ways to go to get to finished. I suspect a plywood tank may be in your future tim. ;)
How'd guess that, Fired Up!!! I made plywood growbeds in my AP system using liners. Now I want to make 2nd system as DWC
The king of DIY is a understatement, looking great so far!!!
Nathan Owen :) thanks pal
Just a tip from a person who is doing this build. I am following his build as much as possible. A pro tip is DO NOT let the wood glue sit. Sanding is extremely difficult around the seams. When glue is wet wipe away. Sanding is extremely difficult.
Thanks Joey this video helped me build my own aquarium. I watched it about 15 or 20 times.
Built several of these back in mid 70’s, but not as finished out as yours. Used marine epoxy paint from Sears for the sealer. As far as I know, one is still in use. Brought back memories, thanks
Builds plywood tank with 10 gallons of dripping wood glue on hardwood floor...
Great video explaining everything in amazing detail. Will be building a plywood home for my Bearded dragon soon.
Very good building slills. This comes with extra thaught, and a good build. For space and materials, probabbly the best plywood aquarium I've seen. For what it's purpose is for.
You have changed over the past three years... from "teacher" to the regular guy showing how he's doing it and a friend of us all! It's you, no doubt, but your 2018 presentations are a lot better!
Zelfs ik 2022 kunnen wij nog volop genieten!
I love the size you chose! I always liked tanks that are very deep from front to back.
Been watching your videos for years dude, this is the most professional to date. Nice work.
lupo10 Thanks pal. The rest of this series will look like this one, however i did end up adding in another camera for different perspectives in the videos to follow. So i would suspect they will get better as they go.(this series anyways). Im not sure though, as i have not gotten to editing them yet.
Nice work, but I think it could be done more efficiently.
Why us the wood screws? They have very little holding power compared to epoxy glue. Screws can hold hundreds of pounds but epoxy can hold thousands of pounds per square inch and you have a lot of square inches.
Why not use epoxy glue? It is stronger than wood glue and it is waterproof.
Since you are coating plywood with epoxy, coat the wood with epoxy before assembly. Then, while the coating is still tacky, glue the panels together.
Further, sealing the corners with silicone is unnecessary. You can do that with epoxy and thickener. I would also reinforce the corners with fibreglass on the inside. That will make a corner much stronger than wood glue and screws.
Love your video, using your basic foundation details I built my very own aquarium. Thanks to you I now own a 20' x 2' x 4' tank in a rectangular shape on a 2 1/2' base. It's awesome and my koi love it.
that's a huge tank!!!!! i would love a koi pond some day :)
+little tin goddess thanks
How’s it doing now?
You have inspired me to do my own plywood aquarium. A little description for you, I’m going to build a 500 gallon in my basement. When I’m done it will look like it is in the wall. Thanks for your videos, very professional.
Thanks for revisiting this topic . I've always wanted to build this but never built up the courage. Maybe this time I'll tackle it .
all4mefitness No problem. I have been wanting to do another one for a while!
Awesome idea. Im going to start building reptile enclosures for sale soon. Now my thought on all these wood tanks and enclosures is there is a little too much time and money put into trying to seal them water tight. Wouldn't just be easier to paint the wood with whatever color you wanted then box it all in with plexiglass and silicone with a piece of real glass for the front. 😎
You my man are a legend!!!.....my misses on the other hand maaaaay not think so when i start to build mine😊
Wow, great job.Easy to follow and understand.Thanks
It already looks amazing Joey! Keep up the hard work!
Timm Lombardo Thanks Timm!
Awesome series. Cannot wait to see it trimmed, stained / painted, and finished. I think it would be cool to have a canopy with hinged access panels for feeding, and mounting the light inside as well. Once all done and on a matching stand, it will look amazing, Excited!
Ryan Lee Im not building a canopy. The tank was made larger to specifically have a recessed top for lids. ;)
Rewatching this in February of 2024.
Prime DIYJoey
March
Me too😂
April
Been waiting for this video for ages! Looks great!
I have gotten SOO much inspiration from this for a new living room tank in my future house. AWESOME.
David McDonald You can build one of these to match your home to a T!
I’m actually trying to get a bearded dragon…… But I find the terrarium prices way too steep. Watched your “how to build a glass aquarium” video before this…… This is an even better idea!!!!
I did the exact same thing😂 except I’m not making mine for my bearded dragon I’m gonna make a bass tank
Awesome video! Looking forward to part 2.
Jason Lee Thanks! Part to will be out sunday at 8am EST
***** Not soon enough! J/K!
Thank you Joey I've learned so much from you and your videos. God has blessed you with a gift to help others. Keep up the great work my friend.
where did you buy the plywood from? looks amazing so far. you have inspired me to make my own huge aquarium out of plywood.
If you plan to STAIN the plywood you HAVE to wipe the glue off with a wet rag right away! Or the stain won't stain the glue, it will look like shiny wood where the glue is.
I thought that too - and even though he said he would sand it away, it looked like he wiped it all off first. I was also surprised ho little the glue oozed out considering he was generous with the application. All in all - this is a GREAT DIY Video.
Wiping actual will spread the glues sealing a larger area of wood fiber. In my experience as a woodworker I’ve had better results letting the glue dry and using a sharp chisel to remove the dry glue flush at the surface. It takes very little sanding at that point and once sanding the sealed layer of fibers off stain takes easily.
Hey Joey, I love the video so far... I'm looking forward to part two of the build.
Carlos Adams Thanks Carlos!
I'm liking it! I can't wait for part 2!
Great job, keep it up and don’t worry about the negative people have not something better to do. All the best.👍
been watching your videos since 5 years ago. your production is getting better and better. keep up the good editing :)
This is going to be an awesome build. I can't wait to see it. Other than your square plywood tank, I think this will be the best you've done so far
Brian's Fish Tanks Thanks Brian. It ended up turning out really nice.
***** Joey thank you so much for the videos that you post! They have been immensely helpful while I built my 300 gallon plywood bottom tank. You are plumb full of great advise. If you get time please check out my channel "goatschilling" and let me know what you think.
Looks great so far. Dam it we have to wait another week. This would be kick ass for an in wall viewing window..
TheMFLAV If an in wall tank is what you are after and it doesnt matter what the tank look like, then this is by FAR the most cost effective way to build.
Absolutely.. Cant wait for the rest of the build.
Great series. Totally sold on plywood build for my future 7ft marine tank. May even adapt it to a reef drop off....
Awesome job, just have to talk my wife into letting me build an aquarium; I have been out of keeping tropical fish for about 8 years.
I come from a construction background. A couple of things that I noticed about your build and technique.
1. Looking at the burn marks on your plywood it is generally an indication that the saw blade is dull and needs to be replaced or resharpened.
2. When applying wood glue from a bottle instead of `pulling` the glue bottle - try pushing the glue bottle. This technique will result in two small beads of glue instead of one - it gives better coverage.
3. Robertson screws are the only way to go!
Not that you need suggestions, but for anyone else who is going to build this.
1. Pocket holes work great on plywood for anchoring pieces together and will stop any kind of expansion gaps that spread the boards apart over time.
2. You can wipe away glue squeeze-out with a wet rag to avoid sanding and ruining the finish.
3. Wood glue bonding is based on surface area not thickness (to a degree) so you can spread out the glue with an even and full coat by using an old gift card.
4. Don't use construction grade plywood for this as it has major voids and will not have the integrity to hold up over time. Just get the good stuff.
It's looking really nice Joey. I can't wait to see the it finnish.
40 years ago I made a 55 gallon plexiglass tank and I did the corner overlap just like you did. I did the stip's 1 inch so it gave the tank as if it had a frame around the corners. The strips were black and I polish all the ends even the tank. Thanks for sharing.
Ruben i still sometimes build acrylic tanks just like that. Adds and incredible amount of strength.
I've never had or even seen a plywood aquarium before. It does seem as an interesting alternative to the more conventional glass or acrylic box - can see how this may work in large aquarium.
Your DIY videos are excellent and always enjoyable to watch.
A hello from the other side of the pond from the rock of Gibraltar. LoL.
Keith Howard Plwood tanks are certainly under rated and not built nearly enough. I suppose that is part of the reason i am showing a new one. That, and i need it. haha
I'll remember that as a good argumenrt for the wife when i venture into another project myself. Thanks for the reply and thanks for your prompt response.
I have been thinking about building my own 300+ gallon tank for my Oscars. I am now inspired and will follow your build,,,
Claude Johnson I cant imagine you not wanting to build one after you seeing the full series. You are going to love it!
Niceeeeee! I'm excited for next week. I wish I can make an aquarium like this here at home.
Joshua Noel Guaves At least you will know how i do it, for when the time comes and you want to build one. :)
For the wood screws you used. Would those be effective when screwing together malomine(sp)? Or would they crack the malomine? If I didn't have to drill pilot holes that would be alot simpler for the enclosure I'm planning to bulid
Can hardly wait for the next episode, great video! thank you for making it.
fuba44 You are welcome. :)
It's nice to see the master at work!! After waterproofing the tank , put Malaysian Driftwood all over the walls that will be very hot
Eugenio Vazquez Sounds interesting. I once did a tank and filled it with vines. Looked awesome.
Awesome video! ! Can't wait to see the finished tank. It's going to b beautiful!
Ivory Queen Yup!
I cant wait to build one of these... UaruJoey you are the man!
I really like the plywood tank, and I really like how you used the router to route the edges. only one thing, you were going back wards. Normally for the direction of the blade you would cut from left to right, with the router vertical. Just take in to consideration witch way the material is facing. For harder woods like oak run in reverse like you were doing for a nice clean cut. Just a tip. You are the man. Your videos are great, and you have been a big help. Keep it up bro. thanks
Oregon Trees I was just trying to get good shots with the camera. Glad you enjoyed it. :)
Nice. Yes they are all great. I'm a cabinet builder and I love building boxes lol. Can't wait for part two.
What else do you do for a living. You are pretty dam handy
Oregon Trees I see! Then no wonder you picked up on that! (Didn't think anyone would notice)
I always pay attention to your videos. They are always very well done. Besides my grow videos that I watch. I pass lots of time picking up what you are laying down.
Wow epic so far can't wait till next week!
Joey, I have an old 55 gallon tank that I have been debating on turning into 2 plywood tanks. I was thinking about increasing the capacity to 75 gallons. Will the glass work for that?
Excellent video as always! Very informative, the best one yet!
Andrew Baggett Glad you think so! thanks Andrew.
I am so glad you are building one of these..
Brian Stalter So am I. :)
can you please list of the tools and material needed??
thanks.
..... No. 😑
You're awesome I watch all your videos
2022 and still watching his videos all I can say is a big thank you me and my family really enjoy this video
Would you be able to do an update video on how this tank lasted long or if it didn’t last or any thing you would have changed about the way you built it
This looks absolutely amazing.
khenryhector I thought so too. ;) thanks!
Hey Joey can't tell u mate how much I'm looking forward to watching your next two videos.
I'm getting some really good ideas here.
Great video!
TheAquaman1979 Thank you!
Can't wait for next week :) it looks awesome
why why why you have to give me more ideas!! 😀
Great video!!
Great job, great video only thing I would have done is use the kregs pocket hole jig and screw them all along the bottom length and width top also even the front panel to put together, either way you did a superb job
lovely video, very nicely explained, excited to see the next part on waterproofing.
andrew da cruz That portion is arguably my favourite.
This looks so good... Definitely something i should do someday.
That thing is built like a tank...
Sam Weatly i get it
tip. you can wipe the exesive glue with a wet cloth remember not to throw the cloth on the floor wen the water dries the cloth wil be gluet to the floor and leave white stains
All your videos are great!!!
Hi Joey, I’m just wondering how long this has lasted? Is it still used or did it need any repairs etc. would love and update. Looking to start this asap. Thank you ❤
Very informative. I'm going to make an 800 gallon acrylic soon.
Me too
***** OMG! yes thanks you so much! I've been waiting for this build for sometime. No one does it like you Joey that's why I'm a subscriber.
Josh Wurmnest Thanks Josh!
awesome set of videos, Im looking at building a large vivarium for a Chinese Water Dragon and find myself viewing this video a lot. my enclosure will easily double this size but wont need near the amount of bracing because it isnt holding water like an aquarium would but will have a 33 gallon pool on the bottom for swimming so for moisture I am definitely using pond shield, the pool will have an external aquarium filter cycling water for freshness though, thinking of using concrete for background/pool with a waterfall but not sure just yet, just have to get the box built and sliding glass panels for the front door. Great job btw! you have already given me many ideas as to starting this project!
Awesome job bro. So far so good. Seeing from the pics online it came out amazing. Thanks for sharing your beautiful setup. Your Arrowana is gonna love that tank. 👍
J Spalding Thanks J. The Aro loves it!
Hi! Awesome tutorial, can you explain where you get the actual tank for inside or where you source the glass? I want to upgrade my red eared slider’s tank to one this size but can’t find any tanks that seem to be as large as I want under 7-8k.
Ok first off awsome video. I do have a quesion. You said the front panel is 78" x 29", whats the size of the opening for the glass?
Dude! You are a BOSS!!!💪🏽💪🏽💪🏽👍🏽👍🏽👍🏽
Joey, man... love the vids!! Never heard of a plywood tank!! Keep up the great content!!
You truly inspire us with your projects. Thanks !!!
tonstel36 That is the goal!
I think you mean “self tapping” screws as “ tap & die” great tutorial video
This is definitely hard word man. Your dedication impresses me!!
This is my new favorite video from you, Great Job!
Purely Freshwater Awesome! Pleased to know you enjoyed it so much.
I seen an older wood aquarium build that u made which is very different as installing top.and botom on the outside and using liquid membrane. Do u still think liquid membrame is a good option or better to use pond waterproofing as liquid membrane is so much easier to use ?
I watched this video years ago. My turtle needs a bigger tank so thought it was a good choice also my plan for a front pannel is going to be a old glass sliding door is this a good idea or am I making a huge mistake?
Great vid Joey, you create some amazing things. Looking forward to the next episode :)
OZZYTHEOSCAR Thanks Ozzy. I dont really aim to create anything amazing, but its nice to think you view some of the projects that way.
5 years later. Is this tank still going strong? Is this the same tank you covered with Styrofoam that looked like Bricks? You should be Syndicated. I would watch every episode faithfully. You are truly the official King of DIY.
you are doing great job dude
Hey Joey tank is an awesome build.. noticed you used corner clamps.. what kind are they.. I'm looking at getting myself some.
Nice looking forward to the next one
Kez Brinkley Thanks!
I need this! My girl wants a big salt water tank, she wants a lionfish, son wants a porcupine puffer so needs to be big, will definitely be watching closely for more updates, one question, would it be bad to have the side viewing panel without the wood, like a bare corner and to silicone the glass?
Joey I'm trying to build a wall divider fish tank utilizing your plans for a plywood tank can there be viewing panels on both sides and still be structurally safe?
Great video enjoyed watching. Looking forward to part 2 :)
great job as always i think i might tackle a similar project for my reptiles and use a sliding glass door instead of a glass viewing panel... awesome work!
Why do you make it look so easy! I wish I had the space to do something like this. :)
Oscar Segundo It sort of is easy when you think about it. :)
You pretty much hold our hand and show us how to do everything easily in all your videos! Now I just wish I had my own house to take one a project like this. Thank you so much for all your DIY videos!
Oscar Segundo Well, in all honesty... I film the videos in a way that I like to learn. I need details. I need to see everything. I need to know everything. I need it explained in simple terms. I try to do that in my videos. I suppose i lucked out and reached so many other people that enjoy learning in the same manner i like to.
Yes and that's why I'm so thankful for you, others like you that love teaching others and the Internet. :)