Hello and thanks to Sanjay. :-) That thing looks REALLY nice and I hope you enjoy it! I was kind of hoping for a jam, but I saw in the comments that you two play very differently. Oh well, perhaps later. In other news, tomorrow is the big day: I try to replace both tie rods on my 1997 Avalon. The weather will be decent and I need to get this done because I have a 2-hour trip to do on Sunday. How bad is it? They are so worn out that I am concerned getting up to 100km/ hr and I don't get concerned about much. (Ask me about the engine light that's been on for almost a year). So wish me luck and I will let you know how it goes.........
G'day mate, I was only thinking of you last night! 😊 If Sanjay and I jammed, you'd never hear him. He plays very quietly. Good luck with the tie rods, although they shouldn't be too hard! FWD and steering tend to need good tie rods 😄😎😄 I would of done mine myself, except I'm too fat to get under the car 😧
@@bigkeg9173 You're not fat, you're fluffy. And you don't have to get under the car, at least for a '97 Avalon. Literally just finished my first test drive and I didn't die, so I call that a success. Once I sober up I'm going to take it on the highway to make sure the shimmy is gone. For a relatively major repair it wasn't that difficult. The only precision part of it is getting the wheels straight enough to get to the shop for an alignment. The steering wheel is about 90 degrees off but I can deal with that for a few days. XD Now that this is done, the last major thing I have to do is replace the front left bearing. I did the left rear last week but that was just a hub with 4 bolts. The front is an actual bearing that you have to press out and press in. Once that's done, it'll be Minecraft all Spring and Summer! XD
@@EvilSearchEngine fluffy hahaha I need to do my brakes and front bearings as well, but think that will be a shop job Glad you got them done easily and successfully Cheers mate 🍻 Glad you got them done
Very nice ,Sanjay ,sounds great and didn’t break the bank. Bit of noodling goin on I bet not the other lol . Be careful with that pitch pipe guys ,very dangerous .👍🍺
GUITAR REVIEW
😎🎶❤🎼👍🔊💃
HOUSEMATES NEW GUITAR
🎸🎵❤💦🕺👏🛑🎼
@@lukelawrence6146 thanks mate. Sanjay has progressed alot since then and loves that guitar. Enjoy and have fun 👍
Had one of these gifted to me from someone who had too many guitars. I'm a total beginner. I love it. It's so loud and it rings.
Really good guitar for the price $249.00
Great for beginners
I have a $700.00 guitar which doesn't sound much different 🙄🤣
Seems like it plays nice.
Good cheap guitar.
Under $200 over there
Sounds sweet 👌
Can't go wrong with Yamaha acoustics in my opinion!
Agreed, although I love my Cort lol
cool unboxing of the Yamaha guitar mate looks a real beauty plays good too
*always full watch👍Au👍nice gave you a like*
Thanks mate, first video for awhile, had a bit of a break.
Lots more to come 👍
Always appreciate you dropping by mate
Nice one mate looks good and sounds good.
Thanks mate and yes it does.
Great little guitar 👍
Great review on the guitar Sanjay has a nice acoustic guitar appreciate you showing us big like 7 enjoyed. Happy Monday 👍😎 🎸
Thanks for watching Chas 😊👍😊
Sounds beautiful. We were looking at some guitars yesterday at cashies. Need a jam sesh video with SanJay 😝
Talk to me first, cause I was going to give you the purple 3/4 one, but it won't be purple, your sander will be involved lol
Sanjay and I have very different styles, I'd drown him out 😎
@@bigkeg9173 yess can't wait to see
@@abbcadabbz641 will take a little while 😎
Hello and thanks to Sanjay. :-) That thing looks REALLY nice and I hope you enjoy it!
I was kind of hoping for a jam, but I saw in the comments that you two play very differently. Oh well, perhaps later.
In other news, tomorrow is the big day: I try to replace both tie rods on my 1997 Avalon. The weather will be decent and I need to get this done because I have a 2-hour trip to do on Sunday. How bad is it? They are so worn out that I am concerned getting up to 100km/ hr and I don't get concerned about much. (Ask me about the engine light that's been on for almost a year).
So wish me luck and I will let you know how it goes.........
G'day mate, I was only thinking of you last night! 😊
If Sanjay and I jammed, you'd never hear him. He plays very quietly.
Good luck with the tie rods, although they shouldn't be too hard!
FWD and steering tend to need good tie rods 😄😎😄
I would of done mine myself, except I'm too fat to get under the car 😧
@@bigkeg9173 You're not fat, you're fluffy. And you don't have to get under the car, at least for a '97 Avalon.
Literally just finished my first test drive and I didn't die, so I call that a success. Once I sober up I'm going to take it on the highway to make sure the shimmy is gone. For a relatively major repair it wasn't that difficult. The only precision part of it is getting the wheels straight enough to get to the shop for an alignment. The steering wheel is about 90 degrees off but I can deal with that for a few days. XD
Now that this is done, the last major thing I have to do is replace the front left bearing. I did the left rear last week but that was just a hub with 4 bolts. The front is an actual bearing that you have to press out and press in. Once that's done, it'll be Minecraft all Spring and Summer! XD
@@EvilSearchEngine fluffy hahaha
I need to do my brakes and front bearings as well, but think that will be a shop job
Glad you got them done easily and successfully
Cheers mate 🍻
Glad you got them done
That looks a great little guitar sounds awesome
Sanjay is very happy but he might have to fight me to use it lol
Cheers mate 😊👍
Very cool Big Keg!
Thanks Coonts 😊👍😊
Very nice ,Sanjay ,sounds great and didn’t break the bank. Bit of noodling goin on I bet not the other lol . Be careful with that pitch pipe guys ,very dangerous .👍🍺
Had to laugh about those pipe instructions 😄😄😄
Thanks guys 👍
Sounds great BK! doesn't sound like a bad price either!
Very impressed with it mate, but Sanjay is over the moon with it 😄
Very cool Yamaha ha ha, sounds alright BK, Cool vid $249 thats pretty good price for a Yamaha, nice job, cheers KC Tasmania Australia 🇦🇺😎🙂🇦🇺🤝🇦🇺👍
Thanks KC , Sanjay is very happy with it 😊
Wowwww
Thank you 😊
Nice Job BIG Keg!
Thanks guys, I appreciate you dropping by 😊👍😊
Sanjay poli aanu mutheee
Yes, he is a good man 👍
What's the difference between F310P and the F310
The P stands for "package" which includes the gig bag, pitch pipe etc.
The F310 comes with nothing extra
I like un boxings
I wish it was mine lol
Cheers mate 🍻
Hey! his guitars made after motorbike?. And my guitars named after motorbike. Suzuki is mine Yamaha is his. Motorbike guitars😊👍.
Hahahahaha need a Harley and an Indian 👍
@@bigkeg9173 yep!👋😄later.
@@bigkeg9173 yeah now ya talking 😂🏍 HD Guitars 👊🏍🏍🏍🏍🏍
Was the action low or high and is it full sized?
The action was great and it's a full sized guitar. It has a shorter scale neck which makes it easier for beginners. Great guitar for the price 👍
@@bigkeg9173 thx for the quick reply 👍
@@philipjanek3864 My pleasure mate. The owner loves this guitar 👍
Only Yamaha I have ever bought had two wheels and an engine, looks a neat guitar though I am ne expert LOL
Hahaha yes, they are a diverse company.
This is a great little guitar.
Thanks Dave 🍻
Nee ilyathe njangal engine guitar vangum
Sanjay needs to buy a lot more guitars