I have been having this problem for years now and everyone knows service center doesn't help much with anything these days. Thankyou this has really helped.
Just faced this problem today on Delhi haridwar highway in my new xtreme 160. I panicked since it's my first bike. But fortunately got a mechanic nearby and he did the same. I came on you tube for explanation and this video is really helpful.
Thank you, aaj morning mei hi front tyre jaam ho gaya achanak, dimag fata , phone uthaya, RUclips pe video dekhi, niche gaya tool uthaya, ek pipe liya, aur theek kar diya😊 thank you again
You are a savior and a great person. I have been watching your videos and you always have tricks or more shorter and cleaner way to solve problems. This suggestion worked like a charm. Job done in just few min. Everyone else was suggeting that the piston or caliper was jam and will need to be taken out to clean. Thank you sooo much ! You saved my day.
For anyone trying to follow this - probably very good video - but who, like me, doesn't speak the guy's language; I think what he's suggesting you do is simply to loosen-off the brake nipple causing a release of pressure (and therefore causing brake fluid to leak)? and this will result in a sudden self-repairing of the jammed caliper? I don't know for sure if this is what's going on, but after messing-about, removing the caliper on my bike and then not knowing what-the-hell to do next and just re-assembling the caliper, I came to this video and tried what he did and it worked for me. Quite amazing - now don't go giving me a hard time if it doesn't work for you. What I will say is this; I don't think applying the small hose is that significant, however it could be some sort of 'hack' to prevent air bubbles getting into the system - WHICH YOU DO NOT WANT - other than that, the little hose will prevent brake fluid spilling over your wheel. If you're going to give this a go without the little hose but you're concerned about air getting into the system, just follow this process: 1. Loosen-off the nipple* then press the brake lever slowly until brake fluid come out of the nipple. 2. WHILE HOLDING THE LEVER IN, tighten-up the nipple again. 3. If no fluid comes out, repeat 1 and 2 until brake fluid does come out (make sure there's brake fluid in the little reservoir/Master cylinder on the handlebars) *The guy in the video uses a brake nipple spanner/wrench, but I used just a size 8 ring spanner/wrench. If the brake nipple is in good condition (or not?) you'll most probably get-away with just using an ordinary spanner/wrench. DO NOT USE A BADLY FITTING SPANNER/WRENCH as you'll probably damage the nut. DON'T FORGET TO FOLLOW STEPS 1 AND 2 CORRECTLY. Thank you, GURUji - my front brake is okay again!
He pressed the side of the caliper to reset the pressure of the cylinder, thus giving space for brake pads to not get into much contact with the brake disc. And then only he locks back the nipple. So there would be no need for taking off the calipers. I also can't understand but i feel that is he pressed hard at the side cuz that's where the cylinder is.
भाऊ खूप खूप धन्यवाद..... माझ्या bike ला 2 वेळा हा प्रॉब्लेम आला होता तर गॅरेज ला फ्रंट व्हील सर्विस चे चार्ज लागले होते ....आता तुमचा विडिओ पाहून मी हा प्रॉब्लेम solve केला
Yes Sir Yeh Work karta hai maine abhi aapki video dekhi aur turant ghar aaya bike double stand ki front wheel slide lock tha phir kya tha maine bike ke parts driver nikala aur try kiya it's truly amazing tips Thank You So Much Love From Guwahati Assam
Thanks 😊😊🙏🙏 sir..just aapka... video dekhaa or..... Uskoo follow kiyaa.... Mere..bike kaa . break ekdum...free huaa.... thanks to .. advance....sir.... Thank ..Q..soo much .. You are great sir...jii Thanks 😊😊🙏🙏🙏🙏
Thanks sir... aapki vajah se mere byke free chal rahi hai.aapne ye vdo bnaya our apnee kaise jase btaya waise hi kya... Meri disck break problem solved ho gyi ..Thanks a lot sir
Hi Friend Thank you so much for this beautiful technique. I did try this yesterday on my CBR 250R non abs version however after loosening the bleeder nut the brake oil started coming out and just didn't stop finally I had to remove the remaining as well from the master cylinder and top it up again. Could you plz tell me why all the oil started coming out instead of just the little.
Its Awesome, I got the same problem and follow your steps and my jamm problem resolved, after loosing the point I had Tap little bit on Calliber part after that extra fuel come out and front wheel move smoothly
Marvellous, fabulous, excellent,, knowledgeable,and self-help able video for everyone who keeps enthusiasm to learn and go ahead in one's precious life.God bless you.
guruji maine kal hi apni FZSV3 ABS me disc pad replace kiya aur naya fluid daal ke bleeding kiya... Aur ab dekh rha hu ki brake halka se engane hi hua rkha hai...free move kar rhaa hai...par pehle jaisa nahi... maine ye technique use kiya.. aur jab bhi mai bleeder bolt ko loose kar raha hu...usme se fluid nikle hi jaa raha hai...band nhi ho rha...aur thokne ke baad...brake lagane se phle free move ho raha hai..par ek baar brake lagane ke baad fir waisa ho jaa rha hai... Kahi naya brake pads aise hi hote hai...ya thodi time baad sahi ho jayega apne aap??? kya karu please suggest solution
Copper based aur synthetic base ye dono supply karte hai. Aab tak bahut customers Liya hai. Aur achha naam kamaya hai. Is grease apply karne sey ye caliper pins ka action achha hota hai aur paani, kachada door rakegha. High temp mey achhi taraf kaam karta hai aur awaaz nahi karta hai. Thanks.
Maine abhi abhi apne motorcyle ka brake ki service karaee hai naya brake pad bhi hai Mere motorcyle ka front disc brake bahut hi hard hai thoda sa press karne par brake aise lagata hai jaise wheel lock ho gayee ho , kya usko thoda smooth ya soft kar sakte hain , ek baar mai gir bhi gaya hoon ? matlab brake lagane ke baad bhi wheel thoda rotate karta rahe ,
@karthiknarayan8577 yes... You remove the brake fluid, then again after using it sometimes, it gets filled back. Then the sound starts coming again... The solution is to remove the installed pistons in the calliper and have them lubricated properly. And put them back in place. Another option is to check for the one screw below the calliper, can't remember the name, it rubber padding gets worn out after sometime, and then calliper starts wobbling and making that noise. The best solution is to replace the calliper with the new original one, that's what I went for. Because that's quick and tension free for the future. I spent 1769 rs for new calliper. Your call bro... But I suggest you do this as soon as possible, before you get your brake disk gets damaged....
Bhaiya bahut din se pareshan hun.. Hornet ka rear break caliper leke.. Bleeder nut ke sight se oil leakege kar raha hai... Koi upaye.. Caliper ko wash kiya hun bleeder nut aur oil seal bhi new lagaya hun fir bhi kar raha hai... Koi upaye hai ya new lena hoga...???
Very nice information. I went to near garage for same issue, He suggested me to change disk and disk break both. I checked my oil and it's too old and so Now i have 2 options in my mind. Thanks for the video.
Sir aapke batane yeah Samjhane Ka Tarika bahut achha hi aap ke Batan par easily Samaj aa jata hai wiring alag alag Prakar ke gadiyo ka bataiye sir Jaise koi gadi battery se Ke Bina start nahi hoti aur koi gadi main Ek he coil rehti hai Iske baare mein detail main samjhaye please sir
Meri bike me b yehi pro hai GIXXER SF 2019 Dono Disc me OR Dics par Scratch aa rhe hai Tyre jaam chal rha haj free nhi ghum rha par meri Bike new hai only 7km chali hai or mene use 2 Gear pr hi chalata tha no hard breakeking
Hiii Abhishek ji .... Mere bike me mera disk break thoda spongy ho gaya hai .Muze woh pehle ki tarah active nahi lag raha hai. Disk break main woh disk break ka feel nahi aa raha hai .How to resolve this issue ? Installed new break pads, changed new break flued but no disk breaking feel.
Sir the mechanic near me has said that I have to change the whole disc machine should I ? I mean i am facing the same problem if the problem remains the same should we buy a new disc machine was the mechanic right ?
Hi My Suzuki access BS4 model engine piston is gone due to no engine oil.. So I want to know if I put New Engine Piston my scooty engine is safe right...
One more issue facing after cleaning chain chain sprockets and front chain sprocket cover I am facing one issue that I am not able to shift on 1st gear. 1 down 4 up what is an issue and how I can resolve it myself please suggest .
thank you for your timely help through your videos. i'm facing another problem in my passion xpro. after siphoning out old oil and filling new oil, i got some air inside the caliper that i purged through reverse bleeding. now even after removing the extra oil (like in this video), the brake shoes are engaged with the disc (though about < 0.5mm gap). so the front tire rotates with a tiny bit difficulty. please help me out here. an avid subscriber and viewer of your top class videos.
Achanak sa kahin door raste me Ho jata hai to kya karna chahiye, Jaise apne pass pana nhi rhega to, Sir, dikat bhi to ho Sakta hai,, Iske liye kya krna hoga iska koi opaye hai... please sir iska koi opaye bataiye??/
Sir mere pass bajaj discover 125 cc disc brake byc hai barish ke mosam mein uska disc brake kaam nahi karta bilkul free ho jata hai iska kya karn hai please reply
Sir main apni bike chala Raha tha Meri bike m disc break hai. Mene break dabai or break Puri dab gayi break nahi Hui. Jab dobara dabai to normal sahi se kaam karne lagi. Aisa kyo hua? Dobara to nahi hoga?
Sir after I remove the the extra pressure like you said I could drive for sometime but if I used the brake lever it brake lock up again.please give suggestion to correct this error
@@selfrepairguruji and sir what is the problem of fork oil leakage.my bike fork oil is leaking on ones side.does it have any effect on the present brake lock up? please comment
Hero Honda Splendor ki timing chain T pe milaya jata hai yaa uski age ek lakeer pe milaya jata hai full Jankari chahiye main aap se isliye bol raha hu kyuki aap bahot acchi vidieo banate ho
This video is informative. I tried to do it myself. You need to get the clear tube and #11 spanner. You should get these at a hardware (don't go to automobile store). Another question would be: how much is the cost for doing this at the local mechanic eg: what is the service charge for this repair? I ask this because 1 mechanic here in Bangalore cheated me pretty badly. I read on Quora this cheating is there even at Authorised Service Centers. Please help by providing a price reference for such works. I tried this but the brakes are still jammed and my brake handle is super spongy. Do I have to inject the liquid back in?
jab mai bike ko turn karta hun to front tyre me automatically break lagta hai or bike runke lagti hai iska kya solution hai Sir in RE classic Disck brake .
Good morning Abhishek sir, how are you? Please can you prepare video about tyres of bike and scooter? After how many kilometer tyre must be replaced? My hero hero honda has reached 20000km
Sir maine new bike sp125 li hai aur mera disk halka jam rahta hai aur disk plate heat bhi ho jata hai. Mai kya kru iska ?? Plz reply....mai service center lekar gaya to wo log bole ki abhi new disk hai isiliye heat ho rha hai ...kchh chal jayega to thik ho jayega .. Lekin maine abhi tak 100 km drive kar liya hai phir thik nhi ho rha hai?? Plz reply
Bhai disc caliper issue h wo change kra lo aur kam brake use kro speed me jam.ho gys to accident ho sktah kam speed me chala kr bhi jam ho jaye to patthar marna caliper pe halka sa Jaam khul jayega uske baad bina dabaye disc ghr tk Jaa skte ho khada nhi hona pdega
Bhai saab. Mera sp shine gaadi me handle se tak tak sound aah raha hai jab bumby road and stone pe ride kiya tho. Nearly 10 mechanic ke pass try kiya resolve karnekeliye even in showroom also. But nobody resolved it. Sab hand screw ko tight kar raha hai. But ho resolve nahi ho raha hai. Kindly bathayiye kaise reaolve karna hai issue
My bike xblade front brake become hard. Normally brake depends on pressure means 10% 20% 30% 40% and so on. But on my bike when I apply brake is start 25% than 50% if I hard didn't press more than that because I don't know if it directly gets 100% so what is the reason this situation starts from last 700 km when I change my brake pad at service centre.
My brake lever of front wheel getting hard ,pad not getting engage with disc while riding when applied brake,getting fail. Then i have to stop on rear brake then press hard lever of front brake then it works....please give solution
Just day before yesterday I had this issue on my Husqvarna svartpilen 250 ... The front Tyre jammed & I couldn't move the bike at all. I had to unscrew the front brake n travel 150 km without the front break . Now the service centre guys asking me to pay for the master cylinder, even though I still have 2 more free service left & my bike is under warranty ...
Sir meri bik shin sp 2018 disk model he..2 mont hua he bike liye but front wheel break disk ke sath contact ho rahahe. Bic bic me ..jise whel free ni ghum rahehe. Me apke chenel pe naya hu please help me sir
Sir I have bought new ntroq 4 days ago and it's front disk break is use without press break and it's jam so what I do service centre says it's new but it's vibrate tha scooty plz reply
brother if the extra fluid comes out from bleeding unit, the amount of brake fluid will decrease. now my question is, will it affect the brake after or needs refill fluid again..? and if this problem showed in new bike then what should i do?
maine pulsar 150 neon liya hai September 2019 me bile ki manufacturing March 2019 ki. front tire me disk brake hai. ghiss ke chal rha hai. kya solutions hoga?
Thank you, it works for me! Saved many hours if I viewed this first.
Thank you
Sir meri problem break plates change kerne ke baad hui hai abhi bhi jam hai please reply
Ok
@@malikmohammed5659 release air
@@selfrepairguruji 55
I have been having this problem for years now and everyone knows service center doesn't help much with anything these days. Thankyou this has really helped.
बताने के लिए बहुत बहुत शुक्रिया, मेकैनिक पूरा डिस्क पैड बदलवने को बोल रहे थे ,अपने मेरा खर्च बचा दिया 🙏🙏🙏🙏🙏🙏
Bhai mujhe bhi change krne ka bol rha h
It was really helpful. The service centre mechanics couldn't give time to fix this and this DIY really helped. Thanks. Keep it up bro!
Just faced this problem today on Delhi haridwar highway in my new xtreme 160. I panicked since it's my first bike. But fortunately got a mechanic nearby and he did the same.
I came on you tube for explanation and this video is really helpful.
Thank you, aaj morning mei hi front tyre jaam ho gaya achanak, dimag fata , phone uthaya, RUclips pe video dekhi, niche gaya tool uthaya, ek pipe liya, aur theek kar diya😊 thank you again
You are a savior and a great person. I have been watching your videos and you always have tricks or more shorter and cleaner way to solve problems. This suggestion worked like a charm. Job done in just few min. Everyone else was suggeting that the piston or caliper was jam and will need to be taken out to clean. Thank you sooo much ! You saved my day.
Glad to help
For anyone trying to follow this - probably very good video - but who, like me, doesn't speak the guy's language; I think what he's suggesting you do is simply to loosen-off the brake nipple causing a release of pressure (and therefore causing brake fluid to leak)? and this will result in a sudden self-repairing of the jammed caliper?
I don't know for sure if this is what's going on, but after messing-about, removing the caliper on my bike and then not knowing what-the-hell to do next and just re-assembling the caliper, I came to this video and tried what he did and it worked for me. Quite amazing - now don't go giving me a hard time if it doesn't work for you.
What I will say is this; I don't think applying the small hose is that significant, however it could be some sort of 'hack' to prevent air bubbles getting into the system - WHICH YOU DO NOT WANT - other than that, the little hose will prevent brake fluid spilling over your wheel.
If you're going to give this a go without the little hose but you're concerned about air getting into the system, just follow this process:
1. Loosen-off the nipple* then press the brake lever slowly until brake fluid come out of the nipple.
2. WHILE HOLDING THE LEVER IN, tighten-up the nipple again.
3. If no fluid comes out, repeat 1 and 2 until brake fluid does come out (make sure there's brake fluid in the little reservoir/Master cylinder on the handlebars)
*The guy in the video uses a brake nipple spanner/wrench, but I used just a size 8 ring spanner/wrench. If the brake nipple is in good condition (or not?) you'll most probably get-away with just using an ordinary spanner/wrench. DO NOT USE A BADLY FITTING SPANNER/WRENCH as you'll probably damage the nut.
DON'T FORGET TO FOLLOW STEPS 1 AND 2 CORRECTLY.
Thank you, GURUji - my front brake is okay again!
He pressed the side of the caliper to reset the pressure of the cylinder, thus giving space for brake pads to not get into much contact with the brake disc. And then only he locks back the nipple. So there would be no need for taking off the calipers. I also can't understand but i feel that is he pressed hard at the side cuz that's where the cylinder is.
भाऊ खूप खूप धन्यवाद.....
माझ्या bike ला 2 वेळा हा प्रॉब्लेम आला होता तर गॅरेज ला फ्रंट व्हील सर्विस चे चार्ज लागले होते ....आता तुमचा विडिओ पाहून मी हा प्रॉब्लेम solve केला
Yes Sir Yeh Work karta hai maine abhi aapki video dekhi aur turant ghar aaya bike double stand ki front wheel slide lock tha phir kya tha maine bike ke parts driver nikala aur try kiya it's truly amazing tips Thank You So Much Love From Guwahati Assam
Thanks 😊😊🙏🙏 sir..just aapka... video dekhaa or.....
Uskoo follow kiyaa....
Mere..bike kaa . break ekdum...free huaa.... thanks to .. advance....sir....
Thank ..Q..soo much
..
You are great sir...jii
Thanks 😊😊🙏🙏🙏🙏
Extremely useful video. Bahut acche. Ekdum sahi to the point. Thank you very much
Thanks sir... aapki vajah se mere byke free chal rahi hai.aapne ye vdo bnaya our apnee kaise jase btaya waise hi kya... Meri disck break problem solved ho gyi ..Thanks a lot sir
You are awesome Bhai, merko bachaliya dhakka marke repair vale ke paas jaane se. Thankyou.
Very good information my bike got stuck in remote area & this helped me a lot !
Hi Friend Thank you so much for this beautiful technique. I did try this yesterday on my CBR 250R non abs version however after loosening the bleeder nut the brake oil started coming out and just didn't stop finally I had to remove the remaining as well from the master cylinder and top it up again. Could you plz tell me why all the oil started coming out instead of just the little.
Hey I have cbr250r non abs version too.. did it work after topping up the brake fluid again.
@@saisridutt yes it did work but i have to replace my caliper as the pistons in it are not fully returning back to its original position 🙏🏼
Sir kya ye scooty ke disk brake mein bhi kaam karega
Thanx sir meri disk brak problem aapki video se solve ho gayi very very thanx sir jee
Finally I found something that makes sense
Its Awesome, I got the same problem and follow your steps and my jamm problem resolved, after loosing the point I had Tap little bit on Calliber part after that extra fuel come out and front wheel move smoothly
Marvellous, fabulous, excellent,, knowledgeable,and self-help able video for everyone who keeps enthusiasm to learn and go ahead in one's precious life.God bless you.
guruji maine kal hi apni FZSV3 ABS me disc pad replace kiya aur naya fluid daal ke bleeding kiya...
Aur ab dekh rha hu ki brake halka se engane hi hua rkha hai...free move kar rhaa hai...par pehle jaisa nahi...
maine ye technique use kiya.. aur jab bhi mai bleeder bolt ko loose kar raha hu...usme se fluid nikle hi jaa raha hai...band nhi ho rha...aur thokne ke baad...brake lagane se phle free move ho raha hai..par ek baar brake lagane ke baad fir waisa ho jaa rha hai...
Kahi naya brake pads aise hi hote hai...ya thodi time baad sahi ho jayega apne aap???
kya karu please suggest solution
THANKS SAR AAP BAHOT ACHESE SHER KARTE HO
Copper based aur synthetic base ye dono supply karte hai. Aab tak bahut customers Liya hai. Aur achha naam kamaya hai.
Is grease apply karne sey ye caliper pins ka action achha hota hai aur paani, kachada door rakegha. High temp mey achhi taraf kaam karta hai aur awaaz nahi karta hai.
Thanks.
🙏🚩 very good information sir
Bhai - can you please tell me where to get this bleeding pipe?
Simple petrol pipe hai, Auto spares ke shop pe ya hardware ke shop pe mil jaayegga
@@selfrepairguruji thanks bro
I have this problem in my Karizma zmr rear wheel... Thanks a lot for useful video.. you must make more videos like this.
Sir, there is a very slight bend in the front disc, can it be fixed without replacing it completely ?
I was trying to fix it like crazy. Thanks for the information.
Maine abhi abhi apne motorcyle ka brake ki service karaee hai naya brake pad bhi hai
Mere motorcyle ka front disc brake bahut hi hard hai thoda sa press karne par brake aise lagata hai jaise wheel lock ho gayee ho , kya usko thoda smooth ya soft kar sakte hain , ek baar mai gir bhi gaya hoon ?
matlab brake lagane ke baad bhi wheel thoda rotate karta rahe ,
Naye break pads lagane ke bad wheel jammed hai.. Bleeding se thik nahi hua.. Honda Unicorrn 150 bike hai.. what di you suggest..
Bajaj v15 main eh problem hain. Main paresan ho chuka tha . Thank u sir .
thank you so much sir ,,,jam disc ke wajah mai ek bar accidents kar chuka hu
Even though Im not able to understand you. Thank you, it helps me a lot.
🤣🤣🤣🤣
Bohot badhiya information Diya apne Mera problem solved
This worked for me.... Thanks a lot. You deserve a subscribe for this 🎉
Did this problem occur again after sometime?
@karthiknarayan8577 yes... You remove the brake fluid, then again after using it sometimes, it gets filled back. Then the sound starts coming again... The solution is to remove the installed pistons in the calliper and have them lubricated properly. And put them back in place. Another option is to check for the one screw below the calliper, can't remember the name, it rubber padding gets worn out after sometime, and then calliper starts wobbling and making that noise. The best solution is to replace the calliper with the new original one, that's what I went for. Because that's quick and tension free for the future. I spent 1769 rs for new calliper. Your call bro... But I suggest you do this as soon as possible, before you get your brake disk gets damaged....
Bahut kaam ki jankari di,bhai...
Really it works brother thank you so much very informative and useful video
Bhaiya bahut din se pareshan hun.. Hornet ka rear break caliper leke.. Bleeder nut ke sight se oil leakege kar raha hai... Koi upaye.. Caliper ko wash kiya hun bleeder nut aur oil seal bhi new lagaya hun fir bhi kar raha hai... Koi upaye hai ya new lena hoga...???
Very nice information.
I went to near garage for same issue,
He suggested me to change disk and disk break both.
I checked my oil and it's too old and so Now i have 2 options in my mind.
Thanks for the video.
Sir kya front wheel bearing kharab honeki vajah se disc brakes problem karta hai?,specially on turning,,please reply
Bahar nikalane ke bajaye ye wapas upar nahi jauega kya?piston andar dabaya to
Sir aapke batane yeah Samjhane Ka Tarika bahut achha hi aap ke Batan par easily Samaj aa jata hai wiring alag alag Prakar ke gadiyo ka bataiye sir Jaise koi gadi battery se Ke Bina start nahi hoti aur koi gadi main Ek he coil rehti hai Iske baare mein detail main samjhaye please sir
Meri bike me b yehi pro hai GIXXER SF 2019 Dono Disc me OR Dics par Scratch aa rhe hai Tyre jaam chal rha haj free nhi ghum rha par meri Bike new hai only 7km chali hai or mene use 2 Gear pr hi chalata tha no hard breakeking
Iski vja se Scooty vibrate bhi hoti h kya .??
sir g mere pass 220 h front tyre jam h means uska disc pad Gaya hua h mujhe filal aise he air nikalnese ho jayega kya
Sir calibration oil cap nahi hogi to koi problem nahi hogi na
Hiii Abhishek ji .... Mere bike me mera disk break thoda spongy ho gaya hai .Muze woh pehle ki tarah active nahi lag raha hai. Disk break main woh disk break ka feel nahi aa raha hai .How to resolve this issue ?
Installed new break pads, changed new break flued but no disk breaking feel.
Sir the mechanic near me has said that I have to change the whole disc machine should I ?
I mean i am facing the same problem if the problem remains the same should we buy a new disc machine was the mechanic right ?
Thank...U very much... very good tips...most of the people don't know ..
Jamming ka oil k ilawa bhi issue ho sakta hai kya??
Hi My Suzuki access BS4 model engine piston is gone due to no engine oil.. So I want to know if I put New Engine Piston my scooty engine is safe right...
Thank you bhai ...it helped me in highway
One more issue facing after cleaning chain chain sprockets and front chain sprocket cover I am facing one issue that I am not able to shift on 1st gear.
1 down 4 up what is an issue and how I can resolve it myself please suggest .
thank you for your timely help through your videos.
i'm facing another problem in my passion xpro. after siphoning out old oil and filling new oil, i got some air inside the caliper that i purged through reverse bleeding. now even after removing the extra oil (like in this video), the brake shoes are engaged with the disc (though about < 0.5mm gap). so the front tire rotates with a tiny bit difficulty.
please help me out here. an avid subscriber and viewer of your top class videos.
Issue solve howa?
Achanak sa kahin door raste me
Ho jata hai to kya karna chahiye,
Jaise apne pass pana nhi rhega to,
Sir, dikat bhi to ho Sakta hai,,
Iske liye kya krna hoga iska koi opaye hai... please sir iska koi opaye bataiye??/
Sir mere pass bajaj discover 125 cc disc brake byc hai barish ke mosam mein uska disc brake kaam nahi karta bilkul free ho jata hai iska kya karn hai please reply
Sir main apni bike chala Raha tha Meri bike m disc break hai. Mene break dabai or break Puri dab gayi break nahi Hui. Jab dobara dabai to normal sahi se kaam karne lagi. Aisa kyo hua? Dobara to nahi hoga?
By doing this it won't affect the master cylinder right sir?
Very important Question please answer sir Diksc brake atomytik jam hot ahe speed madhe gadi astana
Agar tyre change korne time koi front brake daba diya to Aisa problem a sakta hei??
hae
Sir after I remove the the extra pressure like you said I could drive for sometime but if I used the brake lever it brake lock up again.please give suggestion to correct this error
Do brake caliper servicing
@@selfrepairguruji how much it will cost ?
@@selfrepairguruji and sir what is the problem of fork oil leakage.my bike fork oil is leaking on ones side.does it have any effect on the present brake lock up? please comment
Hero Honda Splendor ki timing chain T pe milaya jata hai yaa uski age ek lakeer pe milaya jata hai full Jankari chahiye main aap se isliye bol raha hu kyuki aap bahot acchi vidieo banate ho
Line pai
sir mene RE classic 350 gunmetal li hai 24 feb 2018 ko isme rear disc break mein thi problem aayi to kya ye yhi problem hai
Jo is bande ne video main kiya wohi karo
This video is informative. I tried to do it myself. You need to get the clear tube and #11 spanner. You should get these at a hardware (don't go to automobile store).
Another question would be: how much is the cost for doing this at the local mechanic eg: what is the service charge for this repair? I ask this because 1 mechanic here in Bangalore cheated me pretty badly. I read on Quora this cheating is there even at Authorised Service Centers. Please help by providing a price reference for such works.
I tried this but the brakes are still jammed and my brake handle is super spongy. Do I have to inject the liquid back in?
Mamera axident hogya tha , jiske bjh se panic brake ki maine
And tyre jaam h freely nahi ghumrha ...
But i don't have small pipe to mai kaise kru ye
सर बजाज पल्सर 150 सीसी बाइक्स की पूरी नई डिस्क ब्रेक कितने की मिलती है प्लीज बताएं
My Karizma R 2011 model's front disc brake pad catches the disc at some places. Can I try the above method?
jab mai bike ko turn karta hun to front tyre me automatically break lagta hai or bike runke lagti hai iska kya solution hai Sir in RE classic Disck brake .
New new bike par bhi hota hai kya
Matlab mera ekdm new bike hai uske bhi wheel thoda tight hai
Good morning Abhishek sir, how are you? Please can you prepare video about tyres of bike and scooter? After how many kilometer tyre must be replaced? My hero hero honda has reached 20000km
guruji mere pulsar me ye prblm hy or mne bleeding v kiya but phir jab break 2-3 baar apply karta hu phirse wheel jaam ho jata hy koi solution dijiye.
Sir maine new bike sp125 li hai aur mera disk halka jam rahta hai aur disk plate heat bhi ho jata hai. Mai kya kru iska ??
Plz reply....mai service center lekar gaya to wo log bole ki abhi new disk hai isiliye heat ho rha hai ...kchh chal jayega to thik ho jayega ..
Lekin maine abhi tak 100 km drive kar liya hai phir thik nhi ho rha hai?? Plz reply
Bhai disc caliper issue h wo change kra lo aur kam brake use kro speed me jam.ho gys to accident ho sktah kam speed me chala kr bhi jam ho jaye to patthar marna caliper pe halka sa Jaam khul jayega uske baad bina dabaye disc ghr tk Jaa skte ho khada nhi hona pdega
Worked for my bike as well. Nice video 👍👌👏👏
To the point.. short & sweet. Is there any way i can contact you directly. Thank you very much 🙏
Sir Humko A bataye Aage ka dis pad hum nikal diye hai phir bhi Aawaz aa rahi hai o kesa thaak hoga
But my latest bike has two points above and lateral..which one should i open?
Bhai saab. Mera sp shine gaadi me handle se tak tak sound aah raha hai jab bumby road and stone pe ride kiya tho. Nearly 10 mechanic ke pass try kiya resolve karnekeliye even in showroom also. But nobody resolved it. Sab hand screw ko tight kar raha hai. But ho resolve nahi ho raha hai. Kindly bathayiye kaise reaolve karna hai issue
Excess oil remove krne k baad wheel free ho gyaa. But fir se break lagane pe.. vo problem vaps arise ho gii.. plz solution btaye
My bike xblade front brake become hard. Normally brake depends on pressure means 10% 20% 30% 40% and so on. But on my bike when I apply brake is start 25% than 50% if I hard didn't press more than that because I don't know if it directly gets 100% so what is the reason this situation starts from last 700 km when I change my brake pad at service centre.
1:49 press caliber with fingers 😂👍🏻
Bhai real technical technique hai aapki
Than you brother it helped me lot, keep posting such videos 👍👍
Disc brake screw is really tight and I can't loose it.
Tell me what oil did you used to make it loose. Urgent tell me
That is WD 40
We could hear slight rubbing noise when we are rotating the wheel manually by hand.
Does this mean it is still engaged with brake pad?
if heating then it is an issue otherwise its ok
Sir it happened in my cbr250r today my front tyre not running i tried to remove the fluid but which spanner i dont know sir please tell me spanner no
is a worn disk pad causes brake jammed?
My brake lever of front wheel getting hard ,pad not getting engage with disc while riding when applied brake,getting fail. Then i have to stop on rear brake then press hard lever of front brake then it works....please give solution
RX 135 ko hydraulic clutch Install kar sakte hai kya plz help me
sir mere yamaha fzs 2.0 me front disc brake ka pipe ek jagah me leak ho gya ha tu pipe change karne me kitna kharcha ayega????
Around 400
Just day before yesterday I had this issue on my Husqvarna svartpilen 250 ... The front Tyre jammed & I couldn't move the bike at all. I had to unscrew the front brake n travel 150 km without the front break .
Now the service centre guys asking me to pay for the master cylinder, even though I still have 2 more free service left & my bike is under warranty ...
This is really working trick thank you.keep it up👍
😅. 😅😂 , g, g, ggg, x😅, y, yc,,
I tried my bike , good working thank you
Sir meri bik shin sp 2018 disk model he..2 mont hua he bike liye but front wheel break disk ke sath contact ho rahahe. Bic bic me ..jise whel free ni ghum rahehe. Me apke chenel pe naya hu please help me sir
Sir I have bought new ntroq 4 days ago and it's front disk break is use without press break and it's jam so what I do service centre says it's new but it's vibrate tha scooty plz reply
Wait few days and if problem continues, Claim in warranty
brother if the extra fluid comes out from bleeding unit, the amount of brake fluid will decrease. now my question is, will it affect the brake after or needs refill fluid again..?
and if this problem showed in new bike then what should i do?
caliper piston will push the extra fluid out. no need for refill.
if problem persists ,you have to do servicing of brake caliper
@@selfrepairguruji thank you ❤️
Very rare info ... Great knowledge
maine pulsar 150 neon liya hai
September 2019 me
bile ki manufacturing March 2019 ki.
front tire me disk brake hai.
ghiss ke chal rha hai.
kya solutions hoga?
Slight touching normal hai. But agar wheel ko jaam kaar raaha hai. Wheels to tight rotate kaar raaha hai to problem hai
@Annu UAE 1st service ke baad sahi ho gya hai mere bike me.
Thank you for your update.
Very helpful
Same process rear brake ko bhi apply kar sakte hain Kya??
Hae
Self Repair GURUji thank u sir.my pulsar 220 bike rear disc brake is getting jammed so I will try this process now
Self Repair GURUji mene besa kiya jes aapne bataya pr abhi bhi wheel tite he
I faced this problem today, mechanic did this 👍🏽
If a vehicle come across our way suddenly we have to hit the break hardly, and in my bike jam problem reoccurs, so how to deal with this problem
bleed your brake fluid once because if you have bubbles in break fluid then you might face sudden stop problem
Mera cbz Ka disc break Rhoda jam hai break oil change karwane SE thik ho Jayega kya
Macanic bolta hai thoda jam rahta hai
Isi tarah oil remove kr ho jaega