It has been a while since you uploaded this video. Thank you. I would say that those who are asking 'how' below wouldn't be able to perform the operation you are showing! If you don't know where he is looking and how to get there-you probably can't! I did some deep diving on my brother and found the clog inside the printhead that I had been chasing every couple of printings. Your video helped me do a dive in an area I had never thought to investigate. thanks
Those three cartridge contacts are on a little fingernail-sized bit of plastic that pops out from the top of the cartridge case. A Brother dealer can order that little piece for you. I found one on Ebay.
Thank you very much for taking the time and sharing your experience. It was exactly my problem. I look at other videos how to take the printer apart and found the little pin at the bottom. It was also the one pin in the black ink. Thank you very much .
There is a UTube by an Indian (can understand a word he says) who shows step by step how to disassemble the printer. My only recommendation is to take your own photos and then reassemble in reverse. You’ll be okay.
It has been a while since you uploaded this video. Thank you. I would say that those who are asking 'how' below wouldn't be able to perform the operation you are showing! If you don't know where he is looking and how to get there-you probably can't! I did some deep diving on my brother and found the clog inside the printhead that I had been chasing every couple of printings. Your video helped me do a dive in an area I had never thought to investigate. thanks
It’s great that you found the problem, but if you don’t show us how to fix it, it doesn’t help
He told you exactly how to do it.. u already know where it goes.. think!!! A little common sense goes a lonnnnnng way if you. Think!!! 😘😘
Thank you. Well done, makes complete sense
Great intuition, engineering mind and PUBLIC SERVICE! WOW!
Those three cartridge contacts are on a little fingernail-sized bit of plastic that pops out from the top of the cartridge case. A Brother dealer can order that little piece for you. I found one on Ebay.
Thank you very much for taking the time and sharing your experience. It was exactly my problem. I look at other videos how to take the printer apart and found the little pin at the bottom. It was also the one pin in the black ink. Thank you very much .
very grateful for your advice
Thank you so much for this video!! I think this is my problem!!🤞🏼🤞🏼
Nice video!!
Thanks Charlie, now I know the problem. But don't know how to get inside to replace the pin. Could you do another video?
There is a UTube by an Indian (can understand a word he says) who shows step by step how to disassemble the printer. My only recommendation is to take your own photos and then reassemble in reverse. You’ll be okay.
@@charlesgorton1679 Thanks again Charlie. I'll look for that youtube.
@@charlesgorton1679 please give me th address you tube to this indian thx
@@charlesgorton1679 That's vague
How does that part come out?
Vibration, moving printer, bumping into printer🤷🏼♀️
Thanks
Yeah I have the same problem
" found the problem, not going to show you how to fix it" .
That video is useless, title should be, " found the problem, not going to show you how to fix it" .
Talk too much, too long, too slow and you don't make any sense.
I played it at 1.5x speed.
I play everything at 1.5 speed. He makes perfect sense!
Good grief. Get to the POINT! And the fix. Waste of time.