320 and 330 are the old product numbers for the 420 and 430 so no surprise they fit. I've been reading about the wheel replacement, people have had problems with them coming off and the recommendation is to use some thread-locking fluid. T20 = Torx size 20.
Actually, there is an easier and safer way to remove the top cover. 1. Remove it with the mower standing on his wheels. 2. Start by removing the rear end. Pull at one edge, then the other. It takes a little speed, but not much force. 3. When pushing it back on, start with the front. Give it a bit of a push, it does nit take much. No bodily fluids are wasted this way :)
Yes, I realise that now 😎. But there was nothing in the instructions except "Remove the top cover" or words to that effect. I pulled it but didn't want to risk over-doing it in case I was doing the wrong thing, hence turned it over to take a look.
"Just for your amusement, switch to a 4 mill allen key" 😂
320 and 330 are the old product numbers for the 420 and 430 so no surprise they fit.
I've been reading about the wheel replacement, people have had problems with them coming off and the recommendation is to use some thread-locking fluid.
T20 = Torx size 20.
Interesting about the wheels coming off. I DO know where I've put my thread lock. I'll try a bit harder to find my torque wrench too.
I've had no problem with wheels coming off since fitting the All-Terrain Kit last year
Hello. Please tell me is that kit fits to 450X model)? Thanks 👍
Actually, there is an easier and safer way to remove the top cover.
1. Remove it with the mower standing on his wheels.
2. Start by removing the rear end. Pull at one edge, then the other. It takes a little speed, but not much force.
3. When pushing it back on, start with the front. Give it a bit of a push, it does nit take much.
No bodily fluids are wasted this way :)
Yes, I realise that now 😎. But there was nothing in the instructions except "Remove the top cover" or words to that effect. I pulled it but didn't want to risk over-doing it in case I was doing the wrong thing, hence turned it over to take a look.
This video shows the easier way. :)
ruclips.net/video/suIWW0UNbrc/видео.html
Do you know how to change the front tires?
Sorry, no, I haven't tried to do that.
what do the brushes do?
Hi Maurice. I believe they're supposed to clean the wheels, to give them a better chance of gripping on a slope, but they don't seem very effective.