Cedar Strip Planking the Talullah Outrigger Sailing Canoe
HTML-код
- Опубликовано: 15 июл 2024
- In this video we arrive at @ChesapeakeLightCraftBoats in Annapolis and we begin to build the Talullah Canoe. A double outrigger sailing canoe designed by Chesapeake Light Craft. We talk about this new design here • A New Boat Design is B... . In this video we get a tour of Chesapeake Light Craft, we set up the male mold, make the stems, cedar strip the main hull, and fair the hull.
Check out Chesapeake Light Craft here: bit.ly/ChesapeakeLightCraft
Thanks so much to TotalBoat for Supporting this project. TotalBoat's epoxy resin, fairing compound, carbon cloth, thixo, and much more have been integral for this project and we could not recommend them more www.totalboat.com/Tula
Tula Merch available always in The Tula Shop: tulasendlesssummer.com/shop-tula/
Want a first look at our videos, up to date location information, and Tula Shop discounts? Become a Patron for all that and more! - / tulasendlesssummer
*Some of the links below are affiliate links and we may earn a small commission if you purchase something through the link.*
For a first-hand look at our favorite boating essentials, camera gear, safety equipment, navigation setup, dive equipment, suggested reading, and much more visit our Amazon Affiliate link. www.amazon.com/shop/fikitensup
Are you eyeing Sierra's leggings or Billy's board shorts?? You can find all our favorite Waterlust apparel here: bit.ly/waterlust_tula
Are you into the nitty gritty of how things work, product reviews, and the more technical side of boat life? Check out our other channel, Tula’s Tech Talk! - / @tulastechtalk
RUclips is awesome but we are also on Instagram and Facebook. If you follow us on these platforms you are invited to Q&A’s, polls, and are often much more up to date on where we are!
Billy’s Instagram: @TulasEndlessSummer bit.ly/instabilly
Sierra’s Instagram: @TulasEndlessSummer_Sierra bit.ly/instasierra
Jetty’s Instagram: @JettyTheGypsy bit.ly/instajetty
Tula's Endless Summer Facebook: tulasendlesssummer
All of our most frequently asked questions are answered here:
tulasendlesssummer.com/tulas-e...
A few of our amazing affiliate partners:
BRNKL Boat Monitoring - www.brnkl.io/partners/tula/ Use code "tula" for 10% off
Waterlust - bit.ly/waterlust_tula
Raw Elements Sunblock - bit.ly/RawElementsTula Use code “Tula” at checkout for 10% off!
Kiteboard, Wing, Foil, and Paddle Gear - bit.ly/AdventureSportsUSA Use code "Tula"for 10% off!
Hobie Polarized - bit.ly/HobieShades Use code “HPTULA20” for 20% off!
All our music is licensed from Epidemic Sound www.epidemicsound.com/referra... unless otherwise noted here
For Business Inquiries email tulasendlesssummer@thestation.io
#tulasendlesssummer #chesapeakelightcraft #outriggercanoe
Sierra's back at her favorite job: sanding
Pahahahaha I can’t get away from it 😂
@@Tulasendlesssummer
👍👌👏😁😁😁
TIL that I want a teardrop camp. Those look SO COOL!
I like the Viking short long boat in the background!
AWESOME
Very cool, boat building shop
Interesting to watch you guys building from scratch like the Ran crew but you’re going faster with a smaller boat so we get a glimpse where Ran III is going. You’ve done a super job continuing to create riveting content while waiting for your new cat to be delivered. Thank you!
Somewhere on RUclips is a dude from New Zealand who built a full cruising catamaran using this technique. He put together his pictures and home videos into a series of 10 to 20 videos with the full process up to actual cruising in living aboard. The dedication and commitment to see such a large project through completion was inspiring.
That’s going to be so cool !!
Enjoying watching this unique boat come to life.
Excellent!
Pretty cool guys!
That’s very interesting to see
That looks fun!
I Love the long sleeve😄❤❤🌹🌹🌻🌻 shirts, I ordered two last time. Keep up the good work, you two are something else.
I have only been involved in building one wooden boat start to finish.I built a 17 ft Carolina Flat bottom skiff.I built it with my Dad.It was a very rewarding experience.Thank you for sharing!
Impressive craftsmanship.
That's a cool build !
Dear Tula's endless summer couple.
👍👌👏 Very impressive boatbuilding company with very impressive products and impressive machinery. Great people there too. And now even with 2 impressive guests in the workshop. 😁 ;-) I'm already completely sure, that this new kind of boat will turn out to be fantastic.
Thanks a lot for making teaching explaining recording editing uploading and sharing.
Best regards luck and especially health to all involved people.
Looking nice. 2x👍
Keep up the good work guys
Thanks James!!!
How exciting! I grew up on the Restigouche River in northern New Brunswick, Canada. We had a 26 ft traditional wooden/canvas canoe and it’s so exciting to see you building this boat! I have so many memories of long summer days on the river, stopping on an island, swimming and our campfires at dusk to ghost into the shore with last light and then off to spend our day repeating it all. Wonderful weekends! You are building so many amazing memories and skills together. BRAVO! ❤️❤️❤️❤️❤️❤️
That is so interesting to see how those canoes are made. Very intricate detail and time consuming, But so worth it. Thank you for taking the time to share that with us. Cannot wait till the next episode!
Looks like lots of work guys, but you guys are not afraid of that. Looks like you've got a good start. Keep the good stuff coming guys.
Very interesting
Great project guys. Look forward to seeing this build. I’ve built 5 kits from CLC over the years. I grew up right down the way on South River where I went crabbing as a kid and learned to sail. Have fun!
You guys never stop. Great video.
Can't wait for next Video
Nicely produced
Good and Educational, glad to see CLC shop is almost as messy as mine. THANKS
I'm trying to decide if I'm mad at you two right now! I ended up going down the rabbit hole on their website for about 3 hours! LOL Sadly I don't have the room, the money, or the skills required to do any of it! ♥♥♥
Hey I live a few blocks away and I never even dropped in ! Looks like a great shop, terrific guys.... time for a visit
Wow. That was cool!
Super to see an amazing boat being built.
Really enjoyed this video. Still my favorite channel. LOL
Sierra, I love your concentrating face. So serious. 😅 This is a nicely equipped shop. Thanks for sharing. 😊
Can’t wait to see the finished product. Very cool!
Very interesting 🤔 ✌🏻🍻
That’s pretty cool to watch, it’s looking good so far. Can’t wait to see it when it’s finished and in the water.
Great start. Looking forward to seeing the progress.
Beautiful boats! And that is a lot of work. I'm sure it will come out amazing.
Best content out there guys, always enjoy your projects !
Awesome video guys!!! Those boats are so nice! Great job for sure.
Built a few stitch and glue canoes. Interesting to watch yall build your boat. Can't wait to see the finished product underway!
ran sailing are building their new yacht in the same way
Pretty cool to see the process.
Super interesting, inspirational, I want to build one! SkipRay, Kerry, Ireland.
Love that, building your own boats!
Great job…..loving it 😊
Great video keep them coming like watching them threw the week after work
Sierra !! I bet you thought you were finished sanding after Mountain Myst 😁
Pahaha I cannot escape the sanding
Really cool stuff guys 👍💯
So cool. I have been looking at CLC and there boats for a long time. I'm almost a the point were I can start one myself. So cool to see you build one.
This was a great idea, fascinating project. They had to build a custom strongback molding jig table too.
Wow, I knew this would be awesome! Motivating me to renovate the CLC kayak I built years ago. That strip planked hull is going to be so beautiful & functional. Enjoy your stay in Annapolis! Hope you were able to get out on the Chesapeake. (also hope you might be at Annapolis Boat Show again this year) Be well!
I've been watching Johan & Malin of the Ran Sailing channel build there new 50 ft sailboat. Its surprising you're using a very similar process on this little canoe. Although their wooden hull planking will eventually get encapsulated in a fiberglass sandwhich.
Yeah, I wonder if Johan should be using removable staples or screws instead of permanently setting big stainless wood screws
@@John-Nada Johan mentions this in one of their videos. They could not afford the big staple gun that would be needed to drive through the thicker planks they are using. They know is will be more work, but it was a tradeoff they felt they had to make.
11:14 Shipwrights in the truest sense of the word. There is a similar project going on at the terminus of the Erie Canal in Buffalo.
Steven, I'm in Syracuse, what's going on in Buffalo? I haven't heard?
@@tomwilliams8675 You may have heard that they found the commercial slip,where all the canal boats were loaded and off loaded, a couple of years ago while doing some random excavating. It turned into a huge revival for the waterfront. Part of that is a museum right next to the slip. In that museum they have been building an original canal boat using tools from that era. Very interesting stuff. Check it out on your way to the falls sometime.
@Steven C LaRue I will check it out, thanks.
Whales have elevations at the front for stalling.
Formers are placed at the various stations which are nothing but locations to make up the mold that the boat is built upon.
Niiiiice! 🛶
Happiness is when you finally stop with the murder boards ! Look on the positive side, you can skip arm day at the gym !
Fair winds guys xx
What if you use the same technique to build an aerodynamic camping trailer? Cedar strip is an awesome material, for strength and low weight, but also for its bio-compatibility, which is unlike any other building material.
You're going to need a bigger boat. 😜
And no one in this video is worried about losing their job to AI. 👍
I did not know it was your design!
Chesapeake Light Craft’s design! 👍
❤
FYI - YT is not showing your last 3 vids to subscribers.
This has been happening as a "cull" throughout other YTers.
Send messages to users, so we know. Been subscribed for 19 months!
So is it a canoe they are making or what? Love stripped planking builds
That's a lot of striping and little teasing. Are you working on a prototype?
I have been wanting to buy and build one of their teardrop campers for years.... Once my garage is empty I will do it, I hope....
Y'all need to watch Jimmy Diresta on his canoe build or Neil Paskin on his canoe build
Something tells me that at some point in the future this knowledge you are learning is going to transfer to something you need or want to build or even fix on your big sailboat.
Hope Sierras neck is ok! Seen the band aid. Did billy bite😄
Historically there was a contractual payment schedule. At the whiskey strip placement I believe 1/3 payment was due. The man that commissioned the boat treated the builders with. whiskey and pay?
Oh timber...what a place so many projects so lil time. I would have one but postage to NZ would have to sell half the country. Do they sell just the plans....? Anyhoo keep at it. ;0)
"It was time to start stripping" 😅 love it ❤
The only thing I found that would be annoying is the way the glue is administered, surely they could find a better applicator. It's looking terrific, amazing how a few staples, screws, glue can make a craft. Oh an of course Sanding. 😲😭🤣👍🤘
Just like Ran Sailing's only different. 😅
Cool... Well said. I also watch Ran Sailing
721st subscriber LIKE; 2,939th looky-loo view. (pssst - 11:28 - you can find the tune I recorded for the Tally Ho channel - "Whiskey Plank").
Are you still in Annapolis?
I miss Jetty.
⛵🌏🐟💧⛱🩳👙🩱🎣🐠🐬🌴🤿🦈⚓🐾☀️🇦🇺
Thought you were building a boat, instead your putting together a kitset canoue????
Причём здесь Тула? Даже самовар с пряником не показали...
Staples is cheating lol
Wow! This job looks like it is going to be fun. I can’t wait to see the finished product. Super stoked over here. Hope all is going well with you too and keep up the amazing videos and will keep watching. 🤙🏼🍻🫡🏴☠️🧉🍸🍿😎
Love the tape-modified glue dispenser for getting glue in the coves, @clcboats1. Thinking you should 3d print one for the major brand(s) and sell them.
Hey, Jetty, Sierra, and Billy. I unsubscribed for a bit, but am back on your channel and wishing you the best.