Don't get to discouraged I support you. I'm going to be going live twice a week from now on and I'm going to need a great cohost 💯 Sorry that you got scammed 😐
THAT demonstration of the 'spacers' was what was Wrong with my motor. It did Not have them and the piston welded itself to the cylinder wall. Thank You again Raoul. BTW...Whatever crank that YD100 rod was on had the Wrong rod-pin placement.The piston should Never go into the case. That was just 'for example', right?
Yes that is how the spacer work this is a yd100 crank rod and not this was a to show a point of how to fix it right these wrist pin bearing spacers is what is in my 50cc black motor seuteck motor and it sounds way better than stock
@RaoulDuke224 I get that brother. My gomax Avenger 85 pipe snapped... 150 bucks down the drain... thought it was me but, I've been seeing it happen to a lot of them. As you know, that's the shitty part about this hobby, crap parts and and crap sellers. 💩 keep at it bro 💪
I don't have any faith in a go Max pipe already made. The best easy is to just buy their gorilla pipe and take the outlet of the stock avenger exhaust outlet. Chop the mdx65, (I think that is what it is) after the weld. Cut the stock pipe where you need it to be. Simply insert it inside. Now you'll have to get it welded up but it'll be stronger at the end of the day @@grendelsgarage9723
Don't let them fuckers get to you I've gotten screwed over several times even on a minaralli. but on the base gasket your needing clean both halves and take a toothpick and ultra gray gasket maker thin coat both sides and I let it set for about 20 to 30 minutes and without getting in it put the 2 halves together tighten down the Allen screws and let it set over night in your warm garage and finish putting it together should be fine I just did my minaralli same way
Oh Our Gosh...That poor engine exploded !..There's parts everywhere....the horror...the horror... ;) Thanks for the info bud. I have to pull the 52mm and put the 50mm on,so I'll Actually let you hear it run soon.
What are you talking about man. YOU CANT QUIT YOUR "RAUL DUKE" THE NASA Engineer. BESIDES IF YOU QUIT YOU TUBE . I WONT LEARN ANYTHING. PHANTOM PHANTOM PHANTOM YOUR NOT ALLOWED TO QUIT.
@@RaoulDuke224 ahhhh Raul if you only knew the truth of how many people scammed me with bicycles parts and engines. Exactly why I ran Steve Duncan, Raul marua, Jeffrey Bryan ziggler , Robert Bianchi , blakoon racing , are no longer in business. Had thousands of haters that's the price I paid to prevent others from getting ripped off.
@@MotorizedChuck yeah I already have a two piece phantom 85 the top head is a 110cc or 100cc CNC machine part from olyin from go max Ind and the middle cylinder is a chopped phantom 85 cylinder head from smolik performance and I did my own magic to it caber piston rings 1.2mm x 52mm with a true ms460 piston and smolik performance drilled his own windows two holes in it you can also use sthil chain saw piston rings 1.2mm x 52mm or take a ms380 and make your own two holes in the piston for Reed valve setup
These spacers only work for 50cc seuteck motor or the OLD yd100 cc not sure if they work for a 66/80cc China doll yet I am about to see if they do as for the avenger or phantom not sure if you going to get them to work for them motors unless you look for 12mm wrist pin bearing spacers because this setup for the 10mm wrist pin bearing spacers setup
Don't get to discouraged I support you. I'm going to be going live twice a week from now on and I'm going to need a great cohost 💯
Sorry that you got scammed 😐
Umoto has the YD100 gaskets
Hmm I doubt that
@@RaoulDuke224I'm going to post it
THAT demonstration of the 'spacers' was what was Wrong with my motor. It did Not have them and the piston welded itself to the cylinder wall. Thank You again Raoul. BTW...Whatever crank that YD100 rod was on had the Wrong rod-pin placement.The piston should Never go into the case. That was just 'for example', right?
Yes that is how the spacer work this is a yd100 crank rod and not this was a to show a point of how to fix it right these wrist pin bearing spacers is what is in my 50cc black motor seuteck motor and it sounds way better than stock
Ive got those spacers on my 49mm
Yeah they work
Bro, you're out because of that? Just asking.
I'm pissed off about somethings
@RaoulDuke224 I get that brother. My gomax Avenger 85 pipe snapped... 150 bucks down the drain... thought it was me but, I've been seeing it happen to a lot of them. As you know, that's the shitty part about this hobby, crap parts and and crap sellers. 💩 keep at it bro 💪
@@grendelsgarage9723dam I wish I'd known that I just Bought one
@@grendelsgarage9723 did it snap or did the cheap wield where it holds the pipe break?! Let me know now!😗😎
I don't have any faith in a go Max pipe already made. The best easy is to just buy their gorilla pipe and take the outlet of the stock avenger exhaust outlet. Chop the mdx65, (I think that is what it is) after the weld. Cut the stock pipe where you need it to be. Simply insert it inside. Now you'll have to get it welded up but it'll be stronger at the end of the day @@grendelsgarage9723
Don't let them fuckers get to you I've gotten screwed over several times even on a minaralli. but on the base gasket your needing clean both halves and take a toothpick and ultra gray gasket maker thin coat both sides and I let it set for about 20 to 30 minutes and without getting in it put the 2 halves together tighten down the Allen screws and let it set over night in your warm garage and finish putting it together should be fine I just did my minaralli same way
Amazon is where I go I wouldn't buy a one number lotto ticket from Don.
Oh Our Gosh...That poor engine exploded !..There's parts everywhere....the horror...the horror... ;)
Thanks for the info bud. I have to pull the 52mm and put the 50mm on,so I'll Actually let you hear it run soon.
Your yd100 might be a 50mm piston because the phantom 85 is the 52mm but I know these parts will fit
What are you talking about man. YOU CANT QUIT YOUR "RAUL DUKE" THE NASA Engineer. BESIDES IF YOU QUIT YOU TUBE . I WONT LEARN ANYTHING. PHANTOM PHANTOM PHANTOM YOUR NOT ALLOWED TO QUIT.
Once I calm down I will be back
@@RaoulDuke224 ahhhh Raul if you only knew the truth of how many people scammed me with bicycles parts and engines. Exactly why I ran Steve Duncan, Raul marua, Jeffrey Bryan ziggler , Robert Bianchi , blakoon racing , are no longer in business. Had thousands of haters that's the price I paid to prevent others from getting ripped off.
Johnnie's motorized bikes is doing a complete tear down of the Phantom85. Showing it's weak points, how to improve it and chop topping
@@MotorizedChuck yeah I already have a two piece phantom 85 the top head is a 110cc or 100cc CNC machine part from olyin from go max Ind and the middle cylinder is a chopped phantom 85 cylinder head from smolik performance and I did my own magic to it caber piston rings 1.2mm x 52mm with a true ms460 piston and smolik performance drilled his own windows two holes in it you can also use sthil chain saw piston rings 1.2mm x 52mm or take a ms380 and make your own two holes in the piston for Reed valve setup
Is it possible to only buy the spacers like in quantity? I would use them on my Phantom85, Avenger my 100s etc
These spacers only work for 50cc seuteck motor or the OLD yd100 cc not sure if they work for a 66/80cc China doll yet I am about to see if they do as for the avenger or phantom not sure if you going to get them to work for them motors unless you look for 12mm wrist pin bearing spacers because this setup for the 10mm wrist pin bearing spacers setup
After thinking about it, your 100% correct. I recently ordered a yd100 piston set and it came with them. I'm going to use it on my Frankenstein motor
@@MotorizedChuck told you I am a motor genius
Get you Tecumseh 3hp 98cc snow blower engine hsk 600 from flea bay put torque converter on it leave bicycle engine alone
No because I am still building my super engine