Это видео недоступно.
Сожалеем об этом.
DIY Budget AWD Trailing Arms for my EG Honda CIVIC
HTML-код
- Опубликовано: 6 ноя 2022
- Stickers - hondaresource....
AWD Conversion Plates - hondaresource....
Spherical Bearings - hondaresource....
Inight Hubs - amzn.to/3FYE2ZI
Complete diff mount and LCA for EK
jackspaniaraci...
use discount code HONDARESOURCE to save 10%
Want to send me some cool stuff?
The Honda Resource
43 Quail Ln
West Blocton, AL 35184
Want to buy some cool stuff?
hondaresource.com
Want to save some $$$
Code RUclips on hondaresource.com
Code THR on auxbeam.com
Code HONDARESOURCE on hybrid-racing.com
Code HONDARESOURCE on jackspaniaraci...
Not the most beautiful welds, but them beootches ain't gonna fail!!!! You do fantastic work Broski!
Thank you man. They'll hold up
Ty so much for what u do! Much appreciated my guy! You da man!
Wow! Please build for my 1989 Honda crx si and 1991 crx HF. Love it!
Man those bushings are a deal on your web site. Everyone else wants 50 to 100 bucks more.
Good show, always waiting for next up load. I'm so close on my crv kswap. Just a couple more small things and then ready for that tune. Hoping Santa will bring me a sidewinder turbo manifold. I've been good...(enough). Lol
Nice! I thought about putting a turbo on my crv but decided against it
“Still gonnaaa sendd ittttt” had me dyingg😂
😂
Great content always wanted to see how this was done
yessir!
Great content, just Ordered a set of spherical bushings.
Thank you! Order received 🤟
just found you're channel you do awesome work man was wondering what rotors and calipers you use on rear trailing arms
thank you man! I just used integra rear disc setup.
@@hondaresource thank you did you use dc2 parts
Yes, those will work fine
The link to the plates doesn't seem to work anymore.
I need to find a 5 lug version with the same bolt pattern as the Insight hub and bearing assembly. Looking for a 5 lug AWD solution where I can easily find replacement parts. Might have to look at the Fit.
I quit selling them on my website, I can still get them. I can provide you with the info you need for 5 lug as well. Just shoot my an email. phillip@thehondaresource.com
I love this channel, your shirt had lol'ing.
Would the Inight Hubs you linked work on wagon cv joint ??
I'm not sure.
to retain some rigidity, i wouldnt cut the arm all the way through for the extra bolt. theres plenty of room just notching that area. good shit though.
What rear rotors did you use?
Integra
What calipers and discs work with adapters??
94-01 integra
Thanks for the great info. I'll be picking up your parts for my project soon. Would 5 Lug CRV hubs also work? I was already planning to use CRV Knuckles on my front for 5 lugs on my teggy
There is a 5 lug version as well
Hello would you be able to tell me the thickness of the diy awd plates please?
I've never measured a set of them
Could you by any chance please? @hondaresource
Just found your channel... Sub'd!
Glad to have you here!
Awesome thanks bud
🤟
Hey Phillip, sweet Element! Picked up an '03 EX myself, runs like crap, shaking and hunting revs up and down at idle-any thoughts? Suspect throttle body gasket. Thanks Phillip. 👍🤙
Intake leak. Probably the idle air control valve
where do i buy the palm adapter plates
Interesting 🤔 , as there any extra needed to work with the wagovan rear axle
Nope
Man can you send me the link for all the parts I'm having trouble finding it please 🙏
Most all the info is in the description
@hondaresource do you ship to the UK? Have tried on your website but no luck
What hub would you use if you were 5 lug?..
02-04 CRV
@@hondaresource thank you so much. I appreciate ya!! Been watching your diy awd vids on repeat tryna learn as much as I can!
What other wheel hubs would work? I’m in Pakistan and don’t have access to insight hubs. Would Eg ones work?
I think only insight
Is it gonna be two passenger or two drivers side rear axle for crv diff?
Two Right Rear! Thankyou so much for the awesome content.
Yessir. 2 passenger
Hello. Does it matter if the trailing arms are from a sedan or coupe?
No, they are the same
i've been getting and reading mixed results about PLM products. I had a Cart full on Plm site with things ready to be checked out as i'm doing also a k series budget build green coupe like that awd for some track days and maybe street here and there., but not sure what product is crap. Didn't want to pay for something that the quality is crap. thanks for the review of their products! you should keep it up! and PLm should sponsor you to test their products like this as a show case! on your coupe!
I'm a wholesaler for PLM, email me phillip@thehondaresource.com I can help you out on pricing and give you my honest opinion on the products that I've used
What hubs can I use if it’s. A k series sdiff and axles the ones u used not sure if b or k but are out of stock
K series 2000 crv for 4 lug and 2007 for 5 lug hub
When can i get some of the disk brackets
I forgot to post them on my website. I will tomorrow
Any updates on the PLM crv awd header?
I'm calling my rep again tomorrow to get an update.
Hey just tried to do the RD1 CRV rear disc break conversion. When ever I bleed the brakes they are still spongy when starting the car. All the bubbles are out, never blead dry. Any leads?
Did you bleed it with the rear calipers off and the bleeder screw up
@@hondaresource You mean where the caliper is not touching the brake pads? I think I did, but also how did you got about bleeding them. With a vacuum speed pump or like someone else pushed on the brakes. Lastly how long did it take for you to bleed them?
@@drunkn3450 I did them with a block of wood in where the pads would go, with the caliper unbolted and holding it with the bleeder screw in the upright position. I got my wife to pump the pedal for me.
@@hondaresource With both bolts, or just one. Like the bottom one un bolted to flip the caliper up? I am just try to make sure
That will hold perfectly Mr Babb. Mrs. Babb hello!!!!. Burgers will be fuego 🔥. Season them well you are gucci 👌.
How many amps were you hitting it with?
I don't know. My welder doesn't show
What trailing arms are those? CR-V?
No, they are the original Civic, modified with the listed parts.
Do you think it would work on the EF arms 🤔
Yes 100%
@@hondaresource kool deal thanks bro
sure keeping that rust out lol they lucky
Yeah, we don't have rust in Alabama
I needs a steeeker
I got you fam
Can I use the pwr Spherical Bearing Bushing Kit on my lifted CRV? Would I benefit from it compared to using an OE style replacement ?
No, that was the original plan with these, the crv arm is shaped differently
so i guess im doing an AWD set up now lolol
Do et
@@hondaresource *I'm never going to financially recover from this*
hi pal. what diff you use?
CR-V for this one but wagon will work too
@@hondaresource can I use diff from HRV 2000 D16w1? and why this conversion not support D16 engine with awd gearbox? I checked your home page. it only supports B,H.K.J F series engine.? thank you for your reply.
When's dinner?
Awesome video
Thank you