Convac 3000 service vacuum cleaner engine sparking and loss of power
HTML-код
- Опубликовано: 11 сен 2024
- Burning smell, sparks in the engine area, weak draft in the antistatic service vacuum cleaner for CONVAC 3000P and 3000C copiers and printers. Convac post-warranty service in Poland. Fast, free quotes and original parts: brushes, motors, filters, accessories. Look here: copy-expert.co...
The Convac 3000P vacuum cleaner with a material filter came to us with two faults: sparking and lack of power. During this repair, we cleaned the commutator and brushes, but it did not help, so we installed new brushes, which we arrived, but it did not have the desired effect.
The measurements revealed a winding error. The cause of such damage is usually the degradation of the winding insulation caused by difficult operating conditions or long engine operation time. After damaging the filter, toner filings got into and stuck to the motor winding. The lack of air circulation on the winding caused the insulation to melt in several places.
It was therefore right to install a new engine. The vacuum cleaner regained full power.
In the case of Convac service vacuum cleaners, most repairs are profitable and do not exceed 30% of the purchase price of a new vacuum cleaner.
Please contact me: copy-expert.co...
In this video we used:
1. Strongly degreasing SMART FOAM cleaning foam ecoshine.sklep...
2. YATO meter: YT-73085: toya24.pl/prod...
🌐 Copier parts and service vacuum cleaners: www.copy-expert...
🌐 Facebook: / copy-expert-1134316788...
🤝 Cooperation: copy-expert@wp.pl
Думал будут перематывать ротор как индусы :)
@MrM0il Никто не хочет делать такие вещи. Но вы, вероятно, не прочитаете этот комментарий, потому что RUclips заблокирован в вашей стране. Если только вы не используете VPN :)
@@MrRicoh все работает и без vpn
Perhaps this information does not apply to all regions in Russia.
Konica Minolta C227 printer scan file problem scan file pdf scan to pc not properly just like an example like there is some name Konica Minolta, someone looks fine when the light comes on, in Minolta also the same thing happens but the light comes on, I have changed the scanner as well, I have changed the FFC cable also, I have changed the small board near the scanner as well but I have not changed the FFC cable that comes from the board and I have not changed the board either sir please help me
@SumitChaudhary-cw5jd This is not a mechanical problem. What software version do you have? Did you buy a new copier or was it a used machine?
I had a new printer which started having problems after some time
The printer driver has also been updated
Konica Minolta 227
Printer modal number Konica Minolta 227
You don't understand. It's not about drivers because that's the least of your problems. Your machine needs to have its system software updated. It won't happen by itself and you won't do it either because you don't have the software. You need to call the service for updates.