I've never been so happy in my life in awhile ike your video makes me today ,19th of November 2024,I've been having this issue for couple days,however I already spent piles of money last week to fixed exhausting pipe. Didn't have enough to check with this problem now,I woke up this morning about 6:30,dropped my daughter to work and then come get back with my daily routine however I wanted to try the method since the car have exactly the problem and it's work!!!! Thank you so much. By the way I m a woman in my 40's 😂,not a mechanic 🎉❤❤.
i randomly tried this because my stabilitrak kept randomly coming on and messing my car up. I was desperate for a solution and only thing i could do was push the traction control off before driving and even then it wouldn’t fix it all the time. There was barely any grease on the sensor or on the throttle intake. But i sprayed the sensor cleaning stuff on both, wiped it off really good. And so far it hasn’t came back on at all. So i’m hoping it’s a permanent fix, and if it is - thanks for this video! ❤️
I never would have associated the Service Traction Control error to the Throttle Body or Throttle Position Sensor. Stupid programming in my opinion. I did this Throttle Body cleaning yesterday and so-far our Traverse is running fine again. I didn't actually have any throttle body or carburetor cleaner handy so I used starting fluid. I cleared the error codes and we're good to go. Thank you for this video!
Did this last night on a 2012 Traverse and it worked like a charm! Running nice today!! Thank you so much - I’m no mechanic by far but you made it easy!!
This is the issue I am having with my Traverse. The Traction control light comes on, the Service Air Bags, and sometimes it has Engin Power Failure and won’t accelerate. I believe it to be the Throttle Body so I will check it out. Thanks for sharing.
Thanks man. I followed your instructions. Cleaned out the throttle body with the correct spray. It started up and there was no reduced engine power. The engine light was still on so I took off the positive battery terminal and put back on and that cleared out the engine light. Drives better than ever.
it happened again. Luckily this time we were not on the highway. Loss of power," traction control off" light comes on. Will be 2 years in april I followed your instructions to fix the problem. I have a full can of throttle body cleaner still at home so this time I had everything we needed to get it fixed. I had to look at your video again though
I had no issues with mine. As part of maintenance I cleaned everything and the oily filter area he showed , drove fine. Decided to do a seafoam on the intake and it now shows this message.
Thanks I may have other questions about my traverse you seem to know more than everyone else I feel like my car just keeps having issues but I love the vehicle
OnStar was connected to these cars now OnStar is discontinued it's services to cars older than 2013 the system on these car are unable to read ECM.....Chevy owe us owners some money in my opinion
Well, I'm still having trouble with my 2012 chevy traverse, cleaned the throttle and so what. The contraction service light is on and stabilitrak. Ugh so frustrating 😫
That’s oil from the engine that’s in there it gets in there from that small tube that is connected to the part that connects your TB to the air box. Being that these vehicles (07-13) are prone to timing chain issues i do my own oil changes every 4000 miles and clean that oil from that part every time so it does not build up to the point of becoming an issue
I have a 2012 Chevy Traverse LS and my issue is that the brakes always tighten up when I’m on a hill or on the interstate. I literally have to pull over and wait for the brakes for hours to loosen up yet the Stabilitrak light pops up as well as the ABS light.
I have a trailblazer that says service traction control, I don’t have any reduced engine power and I cleaned the throttlebody with throttlebody cleaner, I still have service traction control, any thoughts?
It found out that there are several issues which cause the ECM to shut down traction control and reduce power to 3 cylinders. It looks like chevy installed a safety protocol that is too sensitive and will shutdown on the slightest error signal. The wheel sensor in my Traverse kept shutting the system down.
I did this and it worked for a while, but the issue is now back and im pissed off. Took this all apart again and throttle body and plenum still clean. i might try the TPS
Starter my 16 traverse last night. The whole car was shaking the engine was sounding weak. The Lights came on saying traction control disable, then Stability message came on along with the light. Let it idle for a few minutes, restarted it and was fine. But light was still on. Would this help fix the issue as well?
I have a 2014 traverse that the throttle continues to advance at start. The rpm’s run up really quick. I shut it down it and so far starts correct the second try. Any ideas what this could be?
did this on my 2015 taverse and now my ABS / Stabilitrak / Traction Control lights are gone, but i am getting brake pedal vibrations/jumping like i have a worn rotor. anyone have any ideas? is this an ABS issue? could be a rotor issue but this only started happening right after cleaning out the throttle body
So if I do this my light will go off that came on right after we did the brakes and that is now on my dash and it says traction control and stabilizer bar never seen it but one time before this but went off now it won't and plus my ABS light came on to
I have a 2010 Traverse that died while driving it. The display says traction control off and it won't start. It will run on starting fluid but that's it. I've checked fuses and replaced the fuel pump and confirmed fuel to the Schrader valve at the engine but still won't start. Any help????
My 2013 Buick enclave i replaced sparkplugs scanner code a mis fire check engine still on cleaned throttle body cleaned map sensor traction control stabilizer appeared and engine shaking
I got these alerts after I changed my struts and got it realigned. No change in power at all. i tried this method in your video and no change. Was told to remove the negative battery terminal which i did and that still didn't fix it. Now what?
My 2013 Chevy Traverse LT turns the TC light on and reads Service Stability Track and Service Traction Control. We have not cleaned the throttle yet. Is this simple to do myself or should I have a mechanic do it? The suv runs normal I don't feel any difference but it's concerning when I'm driving and it turns on. If anyone with the same situation please advise if you solved the problem. TIA
That's not my issue. My issue is while I'm driving the vehicle the brake is pressing down causing the stablizertrak service traction control light to come on . I'm steady having to pull the brake back up with my feet. To keep the light from coming on
You really need to remove the throttle body completely to clean it properly. Don't ever spray that shit inside ur intake. It will fuck up ur sensors and just cause issues.
I've never been so happy in my life in awhile ike your video makes me today ,19th of November 2024,I've been having this issue for couple days,however I already spent piles of money last week to fixed exhausting pipe. Didn't have enough to check with this problem now,I woke up this morning about 6:30,dropped my daughter to work and then come get back with my daily routine however I wanted to try the method since the car have exactly the problem and it's work!!!! Thank you so much. By the way I m a woman in my 40's 😂,not a mechanic 🎉❤❤.
You're very welcome glad could help
i randomly tried this because my stabilitrak kept randomly coming on and messing my car up. I was desperate for a solution and only thing i could do was push the traction control off before driving and even then it wouldn’t fix it all the time. There was barely any grease on the sensor or on the throttle intake. But i sprayed the sensor cleaning stuff on both, wiped it off really good. And so far it hasn’t came back on at all. So i’m hoping it’s a permanent fix, and if it is - thanks for this video! ❤️
Your welcome. Hope it fixes the problem. Please like subscribe and share
I never would have associated the Service Traction Control error to the Throttle Body or Throttle Position Sensor. Stupid programming in my opinion. I did this Throttle Body cleaning yesterday and so-far our Traverse is running fine again. I didn't actually have any throttle body or carburetor cleaner handy so I used starting fluid. I cleared the error codes and we're good to go. Thank you for this video!
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Did this last night on a 2012 Traverse and it worked like a charm! Running nice today!! Thank you so much - I’m no mechanic by far but you made it easy!!
This is the issue I am having with my Traverse. The Traction control light comes on, the Service Air Bags, and sometimes it has Engin Power Failure and won’t accelerate. I believe it to be the Throttle Body so I will check it out. Thanks for sharing.
Thanks man. I followed your instructions. Cleaned out the throttle body with the correct spray. It started up and there was no reduced engine power. The engine light was still on so I took off the positive battery terminal and put back on and that cleared out the engine light. Drives better than ever.
You're very welcome thanks for commenting hope you subscribe like and share.
it happened again. Luckily this time we were not on the highway. Loss of power," traction control off" light comes on. Will be 2 years in april I followed your instructions to fix the problem. I have a full can of throttle body cleaner still at home so this time I had everything we needed to get it fixed. I had to look at your video again though
Thanks for commenting, hope you get it fixed!
A whole lot of oil dripping out of mine. You saved the day for me. You the man 👍
glad could help please subscribe like and share and check our my other helpfull videos.
I had no issues with mine. As part of maintenance I cleaned everything and the oily filter area he showed , drove fine. Decided to do a seafoam on the intake and it now shows this message.
Thank you so much. Solved the problem right away you sir are a genius.
You're welcome! Please subscribe like and share and check out our other helpfull videos
What does the throttle have to do with traction control?
Would this cause my engine to lightly shake because i had those lights pop up and my engine was lightly shaking??
Will this cause a “Service traction control” light?
Thank you! This was very helpful! Do you know anything about why the odometer light is on when I start the car and then it dims out.
Sorry not sure, glad could help
Thanks I may have other questions about my traverse you seem to know more than everyone else I feel like my car just keeps having issues but I love the vehicle
Your welcome glad could help please subscribe like and share and check out our other helpfull videos.
Thanks for the info i will try it getting the reduced power periodically
Hope it helps
forgot to add, i did this to my Buick Enclave and it fixed the issue
This saves me a lot in my 2013 chevy traverse…DIY👍👍👍
Great to hear!
Thank you so much you help a lot I was gonna take it to the shop but thank goodness I watched your video save me money ❤❤❤again thank you
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
OnStar was connected to these cars now OnStar is discontinued it's services to cars older than 2013 the system on these car are unable to read ECM.....Chevy owe us owners some money in my opinion
my 2014 has been doing this and every mechanic i talk to says something different so im going to try this
Hope it helps. Glad could help Please subscribe like and share 🙏.
What was the cleaner you used? And you pointed to things that with the black of everything I had no clue where you were pointing
Thank you so so much for this!!!! I did this today and it saved me so much trouble!!! You’re amazing!
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Well, I'm still having trouble with my 2012 chevy traverse, cleaned the throttle and so what. The contraction service light is on and stabilitrak.
Ugh so frustrating 😫
That’s oil from the engine that’s in there it gets in there from that small tube that is connected to the part that connects your TB to the air box. Being that these vehicles (07-13) are prone to timing chain issues i do my own oil changes every 4000 miles and clean that oil from that part every time so it does not build up to the point of becoming an issue
I have a 2012 Chevy Traverse LS and my issue is that the brakes always tighten up when I’m on a hill or on the interstate. I literally have to pull over and wait for the brakes for hours to loosen up yet the Stabilitrak light pops up as well as the ABS light.
Can you spray a MAP sensor the same way?
Hello.. The stabilititrak light come on and off on my chevy traverse 2019.. what could be the issue?
Thanks in advance!!
Can be many things but check your tire pressure, common cause of problem. Please subscribe like and share 🙏.
I have a trailblazer that says service traction control, I don’t have any reduced engine power and I cleaned the throttlebody with throttlebody cleaner, I still have service traction control, any thoughts?
If you clean it like you said and it works will the warning lights that come up go away on its own?
If that's your only issue then it should after driving about 10miles.
It found out that there are several issues which cause the ECM to shut down traction control and reduce power to 3 cylinders. It looks like chevy installed a safety protocol that is too sensitive and will shutdown on the slightest error signal. The wheel sensor in my Traverse kept shutting the system down.
Dude, you are my hero. Thank you.!!!!
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Thank you, bro you really helped me out. Appreciate it.💯💪🏿👣🙏🏿❤️💪🏿👣🕺🏿
Your very welcome glad to help
Did he clean that collar with that throttle body cleaner? He didn't say. I'm currently having this issue with my Traverse...
Yes, you should clean your collar also. Please like subscribe and share
I did this and it worked for a while, but the issue is now back and im pissed off. Took this all apart again and throttle body and plenum still clean. i might try the TPS
It's also you break pedal sensor that's what fixed mine it's Under $30 dollars
Did you have to relearn throttle body
Do you have to erase the codes after doi g this?
Did this but the problem came back I was so hopeful
Starter my 16 traverse last night. The whole car was shaking the engine was sounding weak. The Lights came on saying traction control disable, then Stability message came on along with the light.
Let it idle for a few minutes, restarted it and was fine. But light was still on. Would this help fix the issue as well?
I have a 2014 traverse that the throttle continues to advance at start. The rpm’s run up really quick. I shut it down it and so far starts correct the second try. Any ideas what this could be?
did this on my 2015 taverse and now my ABS / Stabilitrak / Traction Control lights are gone, but i am getting brake pedal vibrations/jumping like i have a worn rotor. anyone have any ideas? is this an ABS issue? could be a rotor issue but this only started happening right after cleaning out the throttle body
Thank you really needed this
You're very welcome! Glad I could help. Please subscribe like and share and check out our other helpfull videos
Thank you sir for this video
You're very welcome glad could help please subscribe like and share and check out our other helpfull videos.
Thanks for sharing this info 👊🏾
You're welcome
So if I do this my light will go off that came on right after we did the brakes and that is now on my dash and it says traction control and stabilizer bar never seen it but one time before this but went off now it won't and plus my ABS light came on to
I have a 2010 Traverse that died while driving it. The display says traction control off and it won't start. It will run on starting fluid but that's it. I've checked fuses and replaced the fuel pump and confirmed fuel to the Schrader valve at the engine but still won't start. Any help????
My 2013 Buick enclave i replaced sparkplugs scanner code a mis fire check engine still on cleaned throttle body cleaned map sensor traction control stabilizer appeared and engine shaking
Sorry to hear.Please subscribe like and share and check out our other helpfull videos
You are a champ. Thank you!!
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Mine was dirty like that but it ended up being the fuel pump.
Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
Ok but why my traction control n brake light comes on at the same time. Somebody please help me
You may need to check your brake fluid and you may have a problem with your ABS. Please like subscribe and share
I’m having problems with mine the traction control comes on and it won’t start
Your TC may need to be serviced, please subscribe like and share and check our my other helpfull videos.
Unfortunately this didn't work for me
Thank you!
I got these alerts after I changed my struts and got it realigned. No change in power at all. i tried this method in your video and no change. Was told to remove the negative battery terminal which i did and that still didn't fix it. Now what?
Gotta be from KY
L's up👍🏾
Mine keeps having Stabiltrak come on and car won’t get power again to start. Jumping it won’t even help. We changed fuses on ECM too.
My 2013 Chevy Traverse LT turns the TC light on and reads Service Stability Track and Service Traction Control. We have not cleaned the throttle yet. Is this simple to do myself or should I have a mechanic do it? The suv runs normal I don't feel any difference but it's concerning when I'm driving and it turns on. If anyone with the same situation please advise if you solved the problem. TIA
That's not my issue. My issue is while I'm driving the vehicle the brake is pressing down causing the stablizertrak service traction control light to come on . I'm steady having to pull the brake back up with my feet. To keep the light from coming on
Mines says same thing, and shakes hitting bumps, and no control in the rain . What suggestions could be the issue?
Your traction control sounds like it needs to be serviced.
It didn’t work
You really need to remove the throttle body completely to clean it properly. Don't ever spray that shit inside ur intake. It will fuck up ur sensors and just cause issues.
That's crazy, cause on my Silverado.I don't have to do all that Must be a manufactured default..
Bro what? Scan for codes….diagnose it after that…da fuc?
Hace this problem + a lot of white smoke coming out of the exaust, smells like raw gasoline