Thank you so much for taking the time to creat this video, as it has helped me maintain an adjust my tensions on the bottom and top. Keep doing your amazing work.
Hi Busy Bee I am new subscriber!! Could you show us taking the Singer Tradition 2250 apart? I went as far as removing all the screws, etc but was not sure how to deal with latches inside and did not want to damage plastic pulling it apart. Really want to oil the critical areas around engine so need to learn to remove outer cover! Can you help dear? Thank you, lovely.
suggestions....hand crank your needle and make sure its aligned correctly with the hole.....make sure that all bits that your needle is attached to is in the correct position when going up and down and your needle is pushed up the correct amount and facing the right way front or side and this will be in your book..that there is no lint or cotton. If you are sure that the machine is not at fault then let the machine pull your fabric through at its own pace......have you got the correct size needle for your machine and some machines do not like cheap needles...i use smetz( wrong spelling)Other than these suggestions I have no clue.....i would troubleshoot all these issues first....hope this helps....
Thank you so much for taking the time to creat this video, as it has helped me maintain an adjust my tensions on the bottom and top. Keep doing your amazing work.
Thank you so much for sharing this information. It was a big help.
Hi Busy Bee I am new subscriber!! Could you show us taking the Singer Tradition 2250 apart? I went as far as removing all the screws, etc but was not sure how to deal with latches inside and did not want to damage plastic pulling it apart. Really want to oil the critical areas around engine so need to learn to remove outer cover! Can you help dear? Thank you, lovely.
No problem will do next few days....
Its on. Hope it helps....a few more minutes....
Just wondering if you have had any trouble with needles breaking? I have tried everything and cannot figure mine out.
suggestions....hand crank your needle and make sure its aligned correctly with the hole.....make sure that all bits that your needle is attached to is in the correct position when going up and down and your needle is pushed up the correct amount and facing the right way front or side and this will be in your book..that there is no lint or cotton. If you are sure that the machine is not at fault then let the machine pull your fabric through at its own pace......have you got the correct size needle for your machine and some machines do not like cheap needles...i use smetz( wrong spelling)Other than these suggestions I have no clue.....i would troubleshoot all these issues first....hope this helps....
Thread breaking repeatedly after every 15 stitches ,any idea
Sounds like the way its set up, or change needle, tension....
The reverse is stuck and the cloth is not going backward but on the reverse how can i fix it at home if i can -
Hi Jo, If you have your fabric completely stuck then take the screws out and release the bobbin and needle from underneath if possible.....Good luck
How to use dabble needles
I assume you mean double or twin needle...Im not at home at the moment Im in Suffolk, next week I will have a look....at my book...etc,,
Pleasa is ko open kr k band krna bta dain
Sorry can you translate to english then send....
What is that other hole on top of head?
Your gonna have to be more specific
would be nice to show what you oil in the top