Man, I give it to you Andrew, I like your tunes man. You get everything out of the car. Eventually Im gonna get you to tune my 2019 9:50 procharged Mustang, lol Im an old Disabled Vet on a fixed income and it sucks not making the money I used to make. Also that Kenne Belle sounds freckin amazing dude. Im guessing it'll make 710
Not to date myself but i was getting my 01 bullitts vortech installed at mustang magic on long island. Snake bite was the owners Joe Car. He sold it a few years later for a nasty 66 427 4speed fairlane. It was a 10 second full interior car.
With a built motor on 22 PSI I'd think you'd easily be making 700WHP. Kinda crazy to imagine a OG 2.2KB making those numbers but that's about what I would expect see.
This man really taking me back that video snake bite is what made me fall in love with the termi and there was another video but now I gotta go watch it again 😅
It’s probably going to make 650-wheel, my buddy made 604-wheel on 17lbs with the first gen KB2.2L in 2007. Since it’s a twinscrew I bet it favors HP over torque.
I know you're far away from the hurricane but I know how bad the effects can be. What was it 2 years ago the backside and just a tropical strom tore daytona apart. Hopefully you dont have it too bad.
Nice! Got that snake bite video flashbacks now. Sometimes next year if all goes well ill be in a C5 z06 or a Terminator,man the prices on lower mile Termi's are so high its crazy and cheaper to get a 02-04 z06 or a base c6,lol
@@MustangLifestyleTV im in Australia, have the ford fpv falcon gt (australian designed 4 door) with high compression 5.4 modular with stock internals not forged pistons or rods. Have enquired about supercharging and was always told dont do it you will ruin your engine.
@@willybeamon I do my own work, you can find everything used and save money. I have 10k in blower, computer, tuning, coolant system upgrades. Motor costed me about another 10 rebuild with cams and pistons, high end rings gapped for boost. I had a speed shop do the engine, you can do All of that for around 2k if you build it yourself. I should have put Coyote rods in it, Andrew thinks he can get another 75-100 hpone e85 but my bottom end won't take it. I street drive it and autocross race it and as it sits it takes a beating.
@@MustangLifestyleTV oh yea definitely gotta be sneaking up on 800hp then. Especially with some good air. Although we don’t get much of that down here 😂. I live in south Mississippi which is probably even worse than Florida but still both have horrible hot muggy air 90% of the year 😂
@@jacobwelsh911 I live an hour north of him. The hurricane was a big nothing burger for us. And, he literally made a tuning video on the day of the hurricane.
That Snake Bite video is absolutely legendary. I used to watch that all the time.
Dream Garage ! I Really Wish You’d Build Cars And Sell Them Or Raffle Them😮
Man, I give it to you Andrew, I like your tunes man. You get everything out of the car. Eventually Im gonna get you to tune my 2019 9:50 procharged Mustang, lol Im an old Disabled Vet on a fixed income and it sucks not making the money I used to make. Also that Kenne Belle sounds freckin amazing dude. Im guessing it'll make 710
@@LovesM855A1 why do you say that?
Best SVT/Cobra/GT500 mustang content on YT hands down
Andrew, we need more videos more often. Always a good day when you upload.
It sounds so badass! I love it!
Can't wait to see it on the road!
We could peak a 2.2 kb at 28 psi but it always liked to settle back to 22-24 psi once the belt broke in.. Still the best sounding blower out there
Not to date myself but i was getting my 01 bullitts vortech installed at mustang magic on long island. Snake bite was the owners Joe Car. He sold it a few years later for a nasty 66 427 4speed fairlane. It was a 10 second full interior car.
I love the cobra terminators
With a built motor on 22 PSI I'd think you'd easily be making 700WHP. Kinda crazy to imagine a OG 2.2KB making those numbers but that's about what I would expect see.
I would have a foster tube on it too !
That’s the sound we want to hear
The 2.2L Kenneth Bell just sounds so good
This man really taking me back that video snake bite is what made me fall in love with the termi and there was another video but now I gotta go watch it again 😅
Need a dyno video of this next!
We had a special run of 5.8s in Australia in the falcon I think it was 1500 total 351ci harking back to the 351 Cleveland GT falcon days
701 hp! In for the screamer 🎉
Love the content keep it coming
That is very impressive HP...on a ported Eaton.
Ahh dude that Kenny Bell 2.2 looks sweet, sounds sweet. 711 RWHP.
Da passion for mustang awesome bro
where did you find that 2.2? Was that off your friends Cobra? Legendary build!
I know they say the scream is a blower out of "optimal performance" but dang i love that sound. Wish my Whipple sounded like that.
All the hellcats make that scream from stock
Gotta love a screaming blower😎 I love the sound of mine although I definitely need some cooling mods
It’s probably going to make 650-wheel, my buddy made 604-wheel on 17lbs with the first gen KB2.2L in 2007. Since it’s a twinscrew I bet it favors HP over torque.
I have a kb 2.8H and I've thought about swapping to a 2.2 just for the scream
Love this cobra Andrew. She sounds nasty! I’m thinking 700
What is that work light attached to the hood of the Cobra? Where did you get it from? I want one like it. Thanks.
Pretty cool.
I know you're far away from the hurricane but I know how bad the effects can be. What was it 2 years ago the backside and just a tropical strom tore daytona apart. Hopefully you dont have it too bad.
I think you will be close to 700 honestly. My car made 620 with a KB 2.2 on 22lbs with stock compression.
That’s really cool
Nice! Got that snake bite video flashbacks now. Sometimes next year if all goes well ill be in a C5 z06 or a Terminator,man the prices on lower mile Termi's are so high its crazy and cheaper to get a 02-04 z06 or a base c6,lol
Cool, Josh Allen has time to work on Cobra's during the season.
I wanna put a setup like this in my 05 crown vic
Love it man 🔥🔥🔥👍🏿
Awesome video , what’s the name of the song 👌🏽
So what's going on with the og mustang
630 WHP 650 Torque
do you have 2.2KB for sell ? :)
Are you running department of boost titanic heat exchanger ? And power pump? Them kb get hot.
Afco HE currently and KMJ pump
@MustangLifestyleTV you know how good those dog pumps and heat exchangers are.
You have to spray it , nitrous
high compression with forced induction i heard was a no no.
Back in 1966 sure… now a days we can build a really efficient combo with some compression without moon boost
@@MustangLifestyleTV im in Australia, have the ford fpv falcon gt (australian designed 4 door) with high compression 5.4 modular with stock internals not forged pistons or rods. Have enquired about supercharging and was always told dont do it you will ruin your engine.
690hp, 705 torque
685-690 hp I’m betting
685hp 660 torq
Thats old man no coolant lines to it!!??
Do you offer remote tuning.
Yes
@@MustangLifestyleTV
Ok thank you. I will definitely keep you in mind when am ready.
What blower do they make for the 4.62v.
I have a kb 2.1 on my 2v. Andrew tuned it on a megasquirt computer. It puts 450hp 470tq on the wheels.
@@jaxspeedfreakjoe8109I need that for mine as well. What price range are those selling for ? With install and tuning?
@@willybeamon I do my own work, you can find everything used and save money. I have 10k in blower, computer, tuning, coolant system upgrades. Motor costed me about another 10 rebuild with cams and pistons, high end rings gapped for boost. I had a speed shop do the engine, you can do All of that for around 2k if you build it yourself. I should have put Coyote rods in it, Andrew thinks he can get another 75-100 hpone e85 but my bottom end won't take it. I street drive it and autocross race it and as it sits it takes a beating.
Youll crack 700.
718 on E
22psi e85 I’d think you could be flirting with 800hp. I can’t remember doesn’t that car have cams and ported heads?
Cams and 11:1 compression
@@MustangLifestyleTV oh yea definitely gotta be sneaking up on 800hp then. Especially with some good air. Although we don’t get much of that down here 😂. I live in south Mississippi which is probably even worse than Florida but still both have horrible hot muggy air 90% of the year 😂
I say 654
680-730
680-770
728ish + hp
2.2 kb you can’t find them nowadays
724
Gen3r wouldn’t heat up so bad.
For sure it is a much more efficient blower. This is just for fun. Less efficient = more whine and the whine is the fun part of this car
@@MustangLifestyleTV my Odin didn’t whine until I installed a fuel system and went smaller pulley. I guess that means they are efficient.
@@freedom6919741 correct. The Odin is efficient. The 2.2 kb is not lol
708
It’s gonna make like 650 and then you’ll be able to cook dinner on top of it.
As opposed to the significantly smaller less efficient Eaton? I guess we will find out how hot this thing gets but it can’t be worse than the Eaton
Next video hopefully is them dyno tuning it and then celebrating with a medium-rare ribeye prepared by Kenne Bell. 2.2 minutes per side.
No test drive to conclude the video?🤥
Wet roads and hurricane incoming
What? No tune? Only 10 minute video? C'mon man...
Hurricane coming?
@@jacobwelsh911 I live an hour north of him. The hurricane was a big nothing burger for us. And, he literally made a tuning video on the day of the hurricane.
Cobra emblem on the fender is backwards 🫣
4k resolution ????!😂
4d power 🦾🤖👊
🦿🦶