How to use expanding foam

How to use expanding foam
So this is a quick guide in how to use expanding foam, there is loads of expanding insulation foam out there on the market and most insulation that come inside a tin are the same as this so this will cover most bases. Just remember to read the instructions fully before using.
#diy #home #homebuild #foam

[@user-bf9nv7ld7q]

This the best pest nest ever. Insulation, ground contact, and the wind is blocked.

[@Allegedly2right]

I did that my shed still blew away.

[@OrbitAE123]

Thanks

[@Jojo-sb1xs]

This was super helpful thanku so much 😊

[@Thetomrichardson]

Glad it was helpful!

[@dinoz85]

you're pink batts are straight on the concrete with no moisture barrier? wtf

[@Thetomrichardson]

Not needed as won’t be exposed to water

[@user-dj7uw1sy8c]

Never apply foam to a damp substrate. Sprayfoam 101.

[@Thetomrichardson]

That may all depend on the product your using, as stated on the soudal website (who manufactures the no nonsense foam)
Application method
Shake the aerosol can for at least 20 seconds.
Open the cover and fold the tube horizontally.
Surface should be free from grease and dust.
Moisten surfaces with a water sprayer prior to application. For non-conventional substrates a preliminary adhesion test is recommended. Fill holes and cavities for 1/3, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer.
Always read the instructions 101

[@NomadSaga]

Polyurethane is moisture cure.