I just installed these on my 16 S. These are sweet LED's. Extremely bright, pure white light. An awesome upgrade over the yellow factory bulbs. Installation note, on the RHS the washer fluid tank is close to the fog light. In order to install the new larger bulbs I removed the actual fog light housing. It’s 2 phillips head screws that hold the housing. Simple enough. If you want bright white LED fog’s get these, you wont regret it.
Great vid, been looking for this for my corolla 10.5 gen. Btw, can i safely use a 25watts led h16 on my orig housing which it has halogen bulb 19watts?
Yes, absolutely. The Prius fog installation would be virtually identical to what is shown in the video, and here is the LED kit you would use: www.precisionled.com/premium-h11-cree-led-foglights.html
Can I install this led fog lights on my newly purchased 2016 LE Toyota Corolla that didn't come with fog lights ? If so can you make a video on how to connect the wiring on how to do this.
Unfortunately, you would have to have existing fogs in order to install our kit, as the stock wiring needs to be installed, as well as a button to turn the lights on/off.
Hey I'm not sure if you'll see this or not but I just did headlights on mine (16 corolla LE no fog lights) I noticed a plug that is taped back, I'm assuming it's for the fog lights.
No, you typically cannot adjust the headlight bulbs from side to side. This could be a sign that the bulb is not installed properly, or is not locked entirely into place.
hey this isn't related to a corolla but a highlander. i put in h16 type 2 led and condensation built up in the lens. did i get the wrong bulb? if not then could you please provide some tips? thanks!
Thank you for your interest. I apologize for the confusion, but both the low beam and fog lights use the exact same bulb type, which means they will use the exact same LED package as well.
Yes, the product is compatible with the 2014 Corolla S. The H11 bulb is nearly identical fitment as the H16. Also, no, you will not burn any portion of your housing, as LEDs run at a very low temperature in the housing.
Thank you for the suggestion. We will keep an eye our for a Scion iM out here in Los Angeles for a video. However, the installation process is very similar, if not identical for all vehicles. We sell only simple plug and play kits, so the biggest difference would be physically accessing your halogen bulb.
Thank you for your interest. We will keep an eye our for a Corolla iM out here in Los Angeles for a DIY video. However, the installation process is virtually identical for all vehicles, as the lights are simple to access with our trim tool kit.
Thank you for your interest. Yes, we do have listed the 2017 Camry would be listed in the same 11th generation as the previous years, so you would indeed use the same H11 kit listed in the description for your fogs, and the installation process is virtually identical to as shown in the video.
I had LED headlights in my 2011 Corolla and got pulled over by the cops. I recommend sticking to halogens unless you want to get pulled over or want a ticket!
There are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye.
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
I just installed these on my 16 S. These are sweet LED's. Extremely bright, pure white light. An awesome upgrade over the yellow factory bulbs. Installation note, on the RHS the washer fluid tank is close to the fog light. In order to install the new larger bulbs I removed the actual fog light housing. It’s 2 phillips head screws that hold the housing. Simple enough. If you want bright white LED fog’s get these, you wont regret it.
Thanks for the support!
This is how you get a Corolla customer. 😎
Nice video, I like how you pointed out the leveling access area. I never caught that one.
+myfastgti07 Thanks!
Please make one on the Corolla hatchback fog lights
Nice thank u this helps alot
Thanks for tuning in!
2013 Corolla is a different body style. Typo in your title?
The installation process would still be compatible as shown in the video!
Great vid, been looking for this for my corolla 10.5 gen. Btw, can i safely use a 25watts led h16 on my orig housing which it has halogen bulb 19watts?
Nice led bulb,Just one side of led on the bulb. No blind for upcoming driver
👍👍
For Toyota Prius 2012 can be compatibility
Yes, absolutely. The Prius fog installation would be virtually identical to what is shown in the video, and here is the LED kit you would use: www.precisionled.com/premium-h11-cree-led-foglights.html
Can I install this led fog lights on my newly purchased 2016 LE Toyota Corolla that didn't come with fog lights ? If so can you make a video on how to connect the wiring on how to do this.
Unfortunately, you would have to have existing fogs in order to install our kit, as the stock wiring needs to be installed, as well as a button to turn the lights on/off.
Hey I'm not sure if you'll see this or not but I just did headlights on mine (16 corolla LE no fog lights) I noticed a plug that is taped back, I'm assuming it's for the fog lights.
Do they fit on a 2016 Corolla le
I have a 17 the the fog light area looks diff 🤨 🤔 and have no switch inside because my le model didn't come with fogs
Unfortunately, if your vehicle does not come with existing fogs you cannot perform this installation.
Its a hb3 socket to h11 ??
Is there a way to adjust side to side headlights scion im 2016 just recently install HID . IS ILUMINATING to much to the right side. Any hits?
No, you typically cannot adjust the headlight bulbs from side to side. This could be a sign that the bulb is not installed properly, or is not locked entirely into place.
Awesome tutorial...😎💪
Thank you for tuning in!!
hey this isn't related to a corolla but a highlander. i put in h16 type 2 led and condensation built up in the lens. did i get the wrong bulb? if not then could you please provide some tips? thanks!
Check out our Highlander installation video:
ruclips.net/video/dyKBKjoy84U/видео.html
For the corolla, did you end up making any adjustments or is the video showing the beam pattern at the end is the stock angle?
Yes, the end result was the stock angle. With proper installation you should not have to adjust the beam pattern.
I have a Toyota corola15 L E that doesn't Have fog lightsThere's any way you can stole some on it?
Unfortunately no, you would need existing fog lights to perform this upgrade.
maybe I'm missing something.. but it says fog lights.. But the link takes you the headlights not fog lights.?
Thank you for your interest. I apologize for the confusion, but both the low beam and fog lights use the exact same bulb type, which means they will use the exact same LED package as well.
Do they fit a 2014 Corolla S? I believe the original bulb is a H16 19W will a H11 35W LED kit burn the housing ??
Yes, the product is compatible with the 2014 Corolla S. The H11 bulb is nearly identical fitment as the H16. Also, no, you will not burn any portion of your housing, as LEDs run at a very low temperature in the housing.
Hi will this work for a 2012 Toyota Corolla? Thank you
Yes! It is compatible with your 2012 Corolla!
Do one for scion iM 2016
Thank you for the suggestion. We will keep an eye our for a Scion iM out here in Los Angeles for a video. However, the installation process is very similar, if not identical for all vehicles. We sell only simple plug and play kits, so the biggest difference would be physically accessing your halogen bulb.
2009 to 2013 is 10th generation 2014 to 2019 is 11th generation
There are two lights in this kit right?
Thank you for your interest. Yes, for the link listed in the description, the kit would come with 2 bulbs, 2 ballasts, and mounting materials.
2013 is 10th gen! Are they similar kits?
Yes the product linked in the description would work for your 2013 10th gen!
Can you do the Corolla iM?
Thank you for your interest. We will keep an eye our for a Corolla iM out here in Los Angeles for a DIY video. However, the installation process is virtually identical for all vehicles, as the lights are simple to access with our trim tool kit.
Will it fit the 2017 camry?
Thank you for your interest. Yes, we do have listed the 2017 Camry would be listed in the same 11th generation as the previous years, so you would indeed use the same H11 kit listed in the description for your fogs, and the installation process is virtually identical to as shown in the video.
Had anyone complained that they are too bright or have any feedback as to getting in trouble with the law because of these ?
I had LED headlights in my 2011 Corolla and got pulled over by the cops. I recommend sticking to halogens unless you want to get pulled over or want a ticket!
There are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye.
where to buy these kits???
+Joseph Ryan Ledon link in description