Это видео недоступно.
Сожалеем об этом.

Volkswagen MK4 Project - Clutch Installation

Поделиться
HTML-код
  • Опубликовано: 16 авг 2024

Комментарии • 17

  • @dopiaza2006
    @dopiaza2006 11 месяцев назад +4

    There is absolutely no need for the 'music'. If I want to listen to music while watching the video I'll choose my own, thank you! Great video by the way :)

    • @curbsidemechanic3229
      @curbsidemechanic3229  11 месяцев назад +1

      LOL, Thank you for taking time out to watch this video and commenting on it as well.

  • @wildmike9383
    @wildmike9383 3 года назад +3

    Any Tips on putting the transmission back in?? Having a hell of a time even with two people hugeeee props to you for doing this shit by yourself🤝

    • @curbsidemechanic3229
      @curbsidemechanic3229  3 года назад +7

      It helps out a lot if you have 2 Jack's. You need one under the transmission and one under the block. I found it's easier to do the manual transmission then the automatics. With the automatic you have to realign the prongs that go into the torque converter.
      I lowered the block and jacked the transmission up to meet it. You might have to push the transmission in from the drivers side wheel well once you get them aligned. If you can get a bolt in place to help hold it in position as you adjust everything.
      I changed my clutch out in one day this last time around. I was sore for a couple of days afterwards but it got done. I had to man handle some things to get it right. Good Luck with this project Bro. If you have any more questions feel free to hit me up...

    • @DavidB-rx3km
      @DavidB-rx3km 3 года назад +3

      I did this on an A3 Quattro! Horrible job. I had to do it four times!! The box weighs a ton!

    • @dopiaza2006
      @dopiaza2006 11 месяцев назад +1

      Have three people! Also helps to remove the driveshaft flanges on both sides before removing the gearbox.,

    • @dopiaza2006
      @dopiaza2006 11 месяцев назад

      @@DavidB-rx3km Not nearly as much as a DSG box

  • @guitarfreak13095
    @guitarfreak13095 3 года назад +1

    Hey awesome job my man , what type of material is that clutch ? Full organic? Half composite?

    • @curbsidemechanic3229
      @curbsidemechanic3229  3 года назад

      I am not sure what type of material was used but I would recommend a Spec Stage 2 Clutch Kit.. IJS

  • @dillonfahl7087
    @dillonfahl7087 4 года назад +2

    Did you have a pilot bearing ?

    • @curbsidemechanic3229
      @curbsidemechanic3229  4 года назад +1

      Yes, @Dillon Fahl, I replaced the Pilot Bearing as well. The kit I bought came with a new one so I installed it as well.

  • @johnnyrieger4093
    @johnnyrieger4093 4 года назад +2

    Is there a first part of this that shows how you got everything removed?

    • @curbsidemechanic3229
      @curbsidemechanic3229  4 года назад +2

      I posted this not long ago I hope it helps ruclips.net/video/u7YpVTaPQHQ/видео.html

  • @roknrollforever
    @roknrollforever 2 года назад

    Hey man did your Jetta come with a dual mass from the factory? Looks like you installed a single mass I'm trying to figure out the difference and why and when there was a Vin split and just make sure you can rid of the dual mass and run a single.

  • @garvey2510
    @garvey2510 Год назад

    Hello mate what clutch kit did you use?

    • @curbsidemechanic3229
      @curbsidemechanic3229  Год назад

      The first time around I used some no name kit from ebay . The second time around I used a spec stage 2 kit. Go with something name brand...