Ford Focus MK3 used BCM programming.
HTML-код
- Опубликовано: 11 июн 2022
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
In this video I will quick take you through on how to program an used BCM, in this case on a Ford Focus MK3.
If you want to understand why I have changed this particular module, watch the following video:
• Ford Focus MK3... Mult...
Hope you enjoy the video.
Any questions or comments please put them below.
Like always, thank you for watching! 
Авто/Мото
![XO (Only If You Say Yes) - ENHYPEN エンハイプン 엔하이픈 [Music Bank] | KBS WORLD TV 240712](http://i.ytimg.com/vi/wBT1bKKwPTo/mqdefault.jpg)
This video I was actually waiting for. I was just wondering how you got it done. Now I know. I think we both got the IM around the same time 2020. I ran into the same problem like you. The woman that owned the car had only one key and she lost that one. Me, as the great savior, laughed and said " no problem". I remember I got really really pissed off with the Autel. So much so that I called Germany to ask if they were insane. That didn't help of course but still. We , or at least I found, paid a lot of money for the IM and it couldn't even do a stupid Ford freaking Focus. I did the same as you by calling a friend of mine who owns a Ford dealership and he fixed it. It seems that, no matter how much equipment you buy, there will always be issues. Nice video Luis. As always
Absolutely... and manufacturers are on a quest to make it harder and harder...
Thank you for watching and for your comment!
👍👍👍
Had the same issue this week, downloaded Forscan and used my Autel Vci as a passthru and it did the Pats alignment no problem at all. The Forscan prescription is only £10 for the year. An amazing tool for the money, look into it. Awesome videos as always mate 👍
😊
👍👍👍
Hi do you have a link or supplier of forscan?
forscan.org/home.html
The interface you can use VCM2, or a forscan from eBay...
👍👍👍
When I had the issue, and I guess Luis the same, there was only the option of buying a new tool or have a friend or service who could do online coding.
but you had blade key for sure no keyless go
The easy was just cloning the bsi and vvdi prog is a walk over on that so easy bro.
But thanks for the video I love you so much.
Only if I had VVDI...
It is on my list...
Thank you for watching!
👍👍👍
Well done , like usual, I wish to book my car bmw for some coding to you .
😊
Thanks!
👍👍👍
Had similar thing with Ford s max recently. Replaced bcm for faulty reverse lights. VCM2 with a fjds subscription couldn't do it. Needed someone with ETIS account to get security access. This car in particular was keyless so instead it was an RFA module reset in fjds. Forscan definitely could not do this for the newer vehicles. (2015+)
Good morning lm auto
😊
👍👍👍
Hi I have a ford ficus 2014 plate is there a way I can regrow my module online with my key
Hi mate I have an Audi A5 2009 when I turn on the car everything works fine but after some seconds when I’m start driving the speedo goes to zero abs epc esp lights came on and shows me also brake warning contact workshop.
If I turn off the car everything goes to normal but after a while is doing the same thing.
I was on audi yesterday. They did a Dignostic and they couldn’t find any faults because they told me that my ecu has been upgraded.
and when they try to find the faults the computer is crushing and doesn’t show any fault.
1 another guy told that the gateway and the wiring has been changed.
I have no idea what the problem is but I have saw many videos of you and u find solutions for everything.
If u are in london or near the London can u book me an appointment please 🙏
Thanks
just had to do similar with a vag group car (Seat Ibiza), changed ecu, had to find someone who had online GEKO account, and using vas5054a/6054 and Odis, Skoda/Seat still allow online coding of secondhand/used immo parts at the moment, but I believe VW/Audi since last year only allow online coding of only virgin/new immo parts, stuff is becoming a nightmare
Indeed...
The same ones that claim they care for the environment...
Such hypocrisy is unbelievable...
Thank you for watching!
👍👍👍
hi I do exactly the same thing on my im608
but a only have diagnosis hot functions service
vehicle profile and on programming
Good video Lois and I ran into the same thing, glad I wasn't the only one. curious to know if this problem with the 608 has been addressed yet.
Indeed...
I haven't had another one after this yet, time will tell...
👍👍👍
Hi, i need to replace GEM module of a Ford kuga of 2009, how to detect wich modules are compatibles? and how to clone data? the original module is 75MT-14A073 JE. thanks
Perfect
👍👍👍
Fairly sure you can do it with fdrs online, you just need to buy the service online and use the autel cable to pass through.
😊
👍👍👍
bom dia doutor e bom trabalho
Obrigado!
👍👍👍
Much appreciated for professional troubleshooting but autel IM508&IM608 can do but this feature is hidden bro...parameter reset is hidden under remote learn go there and you see parameter reset there i change Ecu & Bcm with autel IM508 not going tru hassle with IDS online programming...this work we all learn everyday 🙏🙏
I will try next time... Once I renew my subscription and get all the updates...
Thanks!
👍👍👍
Hey mate I have focus mk2 that I need help with
Muito bom gostei muito mesmo
☺️
Obrigado!
👍👍👍
I'm almost start looking for autel prices on start that video and think about cancel my Ford account... but I watched to the end ;)
😊
👍👍👍
Hi Iv got a mk7 transit it will run for 10 20 30 minutes then cut out then when I go to turn key I get no dash lights and ticking from glove box any ideas ? Thanks
Have you scanned the van, to see if there is anything that points in the right direction?
👍👍👍
i tried a fiesta and kicked me out needed incode from a generated out code each time ign turned on good morning louis i have heard that diagnostic box tdb 1000 is good for adding keys with the right asset
😊
👍👍👍
Brother where are u based? I have some issues with my car and I believe that u can short it
thought you would have problems , had the same thing i read data off old chip and transferred it over , i could not do the matching part autologic cannot do it either as they cannot validate security of the car being programmed
😊
👍👍👍
Hi
What software programme are you using for this cloning procedure ?
I didn't clone in this case, as per the video...
But I have X-prog, and some other programmers...
👍👍👍
There is no device can do everything . You should buy everything to fix one model . I think the x horse can do the job but it expensive.
Key Programming is the most job that need to buy alot of machines for all cars
😊
👍👍👍
This year fords only online pats programing,also after programing you need to relearn pcm abs from main configuration in atleast by using it forscan
😊
👍👍👍
Any time if need ,let me know 🤝
Hi I’ve just been watching ur video and can I ask can you now program a BCM on a ford custom van 2018 .
With FDRS and IDS online I am sure it is possible...
👍👍👍
@@LMAutoRepairs thanks for the info .
the snap on software after version 15 can do ford pats keys
The autel can do the keys... no problem...
In this case was the BCM that did not belong to the car...
👍👍👍
Iv done the instrument cluster in August
But I have issues I still have the U1900 lost communication and my main problem is the dashboard light stay on 24 hour they never are of I got new battery 2 Months ago and now is flat do u have any idea why it happens??
Never had that... can you communicate with the cluster and all the other modules?
👍👍👍
Yes
@@mikelactions772
Is that fault on the cluster, or on any other modules?
Must be somewhere else I don't know exactly they told me to disconnect the redio but still I have the problem
@@mikelactions772
They said?
If you don't have a scanner, and is not you working on the car, it can be complicated...
Use forscan program
Why not using same imo chip from.old one and put to new clone
Was a possibility...
👍👍👍
Can you proved the contact info for the remote programmer ?
cardiag@mail.com
👍👍👍
Is it easier and cheaper to swap EEPROM and call a day?
I believe you can clone them... I did not have the tool for it...
VVDI is on my list for a long time, I just need another "good excuse" to buy it...😋
👍👍👍
@@LMAutoRepairs I planning too to buy VVDI programmer soon. As programmer only it may not so attractive but there is load of quick adapters, what can make life easier. BMW EWS4 /CAS3 / CAS4 adapter, Mercedes EIS adapters set, Audi BCM2 adapters and remote renew adapters. Exploring current options, may be just swap the chips. Sure, these big MCU chips is another class to remove and solder back. Mobilephone repair shops may be have the necessary tools for that purpose.
You can do the big ones, unless they are really big... I done them successfully in the past... in this BCM though, the two boards would need split first, then the chip...
😓
VVDI would be definitely quicker... and less risky...😋
Hi I bought ford VVdII can that be used to clone second hand ecu ford how about to virginise the second hand ecu
What were the problems the car was having for this to be replaced?
It is all on the previous video... link in the description...
👍👍👍
Had same problem even fjds with dealer accoiunt couldn't do
So the 908 is a better machine right?
They are both good in their way...
The IM608 has different functions and is directed for a different type of work...
👍👍👍
hallo my frind is great job but i have to ask for another way for exampel cope eeprom or mcu or something els because i have no frind in ford 😀 i like your ideas tell me please if you have one
You can clone it with the right tools...
👍👍👍
👍🏻👍🏻👍🏻🌷
☺️
Thanks!
👍👍👍
you can do it with IM608
I will check it better next time...
👍👍👍
why not read just the chip inside the bcm i think hc12 mcu and write it in new one and car will start
It is a solution...
👍👍👍
Hi. I have to replace my bcm by my ford focus mk3 2014. Can you give me maybe some Informations it shoud work?
X431 v+ pro3
I greet you boos ,link me to the guy that remotely did it for you so i can work with him too thanks.
Thanks!
Here you have it...
www.ebay.co.uk/itm/203442378030?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gD5D3ThzRmu&sssrc=2051273&ssuid=gD5D3ThzRmu&var=&widget_ver=artemis&media=COPY
dam im happy i got out of the lorry and car game .
😊
It is getting more difficult/expensive by the day...
👍👍👍
🤣
Why did you not read mcu from old and writed in new bcm?
I did not have the tool for it...
Or at least, a tool that I was 100% would do it...
VVDI I believe it does it, need to get one...😋
👍👍👍
@@LMAutoRepairs isnt inside motorola 9s12xe? Xprog / orange5 work that job
Probably... my X-prog is a quite old one... 5.5...
I don't have orange...
👍👍👍
@@LMAutoRepairs however its a good video 👌
What tool software you recommend for this kind of jobs
Lol😂 ups !, you showed that you made a mistake in the diagnosis thinking it was the BCM, when in reality it was just the key.
If you are being serious, you have definitely to read the description of this video, nor you have understood what exactly was wrong with the car...
👍👍👍