@@antoniocerciello4826 I never run them it’s a personal preference. I like to know the oil is definitely in the cylinder, if the autolube system were to break that’s the engine seized! Also with it being a kitted scooter i ran it at 3% mix
it all depends on the angle of the manifold you have. i needed the spacer because the float bowl would hit the cylinder cowling and it wouldn’t go on. for how cheap the spacers are i would get one for the sake of having it incase you do need it.
@@diegoaleman5185 Yes it will mount to any px it would just need tuned correctly for your kit. I think the standard carb for the standard engine is the best way to run it, personally i wouldn’t put a phbh on it but it will work. for a 150 i’d imagine a smaller carb would be needed maybe a 26 or 28 not a 30
I never drove it with the stock carb but it will definitely improve the engine, its 6mm bigger and because its a race carb it performs better all round. The engine has a malossi 210 kit so its not stock, but the 30mil phbh works really well with that kit.
What exhaust are you using?
It can be mounted with an oil mixer? I noticed you deleted it , why?
@@antoniocerciello4826 I never run them it’s a personal preference. I like to know the oil is definitely in the cylinder, if the autolube system were to break that’s the engine seized! Also with it being a kitted scooter i ran it at 3% mix
is the 6mm spacer is a must, or is it OK if I just use the manifold directly to the reed valve for this set up?
it all depends on the angle of the manifold you have. i needed the spacer because the float bowl would hit the cylinder cowling and it wouldn’t go on. for how cheap the spacers are i would get one for the sake of having it incase you do need it.
Does it work on a stock engine from a vespa px 150?
@@diegoaleman5185 Yes it will mount to any px it would just need tuned correctly for your kit. I think the standard carb for the standard engine is the best way to run it, personally i wouldn’t put a phbh on it but it will work. for a 150 i’d imagine a smaller carb would be needed maybe a 26 or 28 not a 30
Does it come with a choke cable? And will my original throttle cable be adequate to operate it?
@@frankmcgrath2311 It doesn’t come with a choke cable you’d need to buy one. Yes it works with the original throttle cable.
any performance improvement on the stock engine?
I never drove it with the stock carb but it will definitely improve the engine, its 6mm bigger and because its a race carb it performs better all round. The engine has a malossi 210 kit so its not stock, but the 30mil phbh works really well with that kit.