@@BoredLockpicker Whould be awesome if lishi comes with a manual haha,, took me a long while to self study it, and your video explain it clearly. They should hire u to make tutorial manual hahaa.
Excited new learner here. I have junkyard locks from an 09 Lexus RX, 10 Toy Rav4, & a 13 Toy Sienna. I just received my TOY2 Track, TOY43AT, & TOY47 lishis. Are any of these compatible? Thanks for the videos and answers!
@@BoredLockpickerdo you know for which models the toy2018 are applicable? I thought all single sided can be done with the Toy2, from 2013 till 2023, is that wrong?
@@BoredLockpicker I have a European 2019 RAV4 that needs the blade cutting as was a stolen/recovery and whoever programmed the fob, didn't do the blade. With regard to your above info, do you think I will need the TOY2, which is listed upto 2018, or the TOY2018 please?
Guessing you didn’t watch the whole video or something. But odd numbers are the A track even numbers are B track. The arrow only indicates that you read the wafers in the opposite direction that you picked them
Thank you so much for the video, in my many years lishi-ing never knew about that double ended arrow on the tool, but always had an issue decoding just the toy2 and have yet to be able to get it, maybe that’s my issue haha, but never had an issue with over 70 other lishis
@@BoredLockpicker I just haven’t seen any wafer kits available unless it uses the same as other Toyota 80k. Which it didn’t list coverage for vehicles that only used this keyway style
This is very very helpful, so hard trying to decode without understanding the tracks direction and reading direction, thanks !!
Just gotta look down that double arrow
@@BoredLockpicker Whould be awesome if lishi comes with a manual haha,, took me a long while to self study it, and your video explain it clearly. They should hire u to make tutorial manual hahaa.
I helped out a little creating this online.fliphtml5.com/aswuk/juqd/?cid=2504#p=1
Thanks again, your video helped me understand a few things, like odd numbers on A track and even numbers on B track 😅
Glad it helped!
For this specific key blank. Is the keycode anywhere on the door cylinders?
Yes on Lexus and Toyota. No on Subaru
Are these not inverted cuts so 1=4 2=3 etc ?
Guessing you didn’t make it the 36 second mark in the video
Now how do you cut this key on the condor mini?
Have a locksmith do it
@@BoredLockpicker I am a locksmith why would I have a condor if I wasn’t
What clamp are you using on your machine?
Great job, Thanks for sharing!
Thanks for watching!
Excited new learner here. I have junkyard locks from an 09 Lexus RX, 10 Toy Rav4, & a 13 Toy Sienna. I just received my TOY2 Track, TOY43AT, & TOY47 lishis. Are any of these compatible? Thanks for the videos and answers!
You’ll have to look
The keyways up
After picking lock the number you get from A and B , how do you generate the key cut code ?? What software or App do you use ??
Lock codes or insta code
the two sided one is a different lishi right? that would be toy48?
The double sided key is toy40 or toy48 single sided is this one.
@@BoredLockpicker same lishi though? Or the ‘2 track’ only works for this one sided?
I’m pretty sure I’ve used to to pick a Lexus open one time and I was surprised that his emergency was double sided
Does it cuts on xhorse dolphin as toy40 4-4 emergency key?
Yes
Toy2 giải mã toyota RV4 đúng không ? Cảm ơn thầy
You will need to look up what key blank or code series to figure out which Lishi to use
sir, how about toy2018.. same or not?
Different keyway
@@BoredLockpickerdo you know for which models the toy2018 are applicable? I thought all single sided can be done with the Toy2, from 2013 till 2023, is that wrong?
I actually asked the Lishi people. I was told it’s a keyway that so far they’ve only seen in China
@@BoredLockpicker I have a European 2019 RAV4 that needs the blade cutting as was a stolen/recovery and whoever programmed the fob, didn't do the blade. With regard to your above info, do you think I will need the TOY2, which is listed upto 2018, or the TOY2018 please?
@@inagbihal8518 USA it’s toy2 no idea if European is different. Could always pull the lock and get the code
So A track is always the top pointing arrow?
I don’t understand your question
@@BoredLockpicker oh im talking about the double arrow. The arrow pointing up is always the A track and the one pointing down is B?
Especially in terms of inputting the bitting on the cutting machine
Guessing you didn’t watch the whole video or something. But odd numbers are the A track even numbers are B track. The arrow only indicates that you read the wafers in the opposite direction that you picked them
@@BoredLockpickeryeah. Sorry got confused there. But you said in the vid that odd numbers are the A track
Great videos.. thanks
You’re welcome
thanks for video
You’re welcome
Hello, can you how to cut a Subaru emergency key too please
I don’t have any but if you go into the app under Subaru single sided key is there.
Thank you so much for the video, in my many years lishi-ing never knew about that double ended arrow on the tool, but always had an issue decoding just the toy2 and have yet to be able to get it, maybe that’s my issue haha, but never had an issue with over 70 other lishis
There’s a few with that arrow. Like HU58.
I like your videos please can you teach me
No I can’t
can this be rekeyed?
You would need to find a wafer kit but I don’t see why it couldn’t taken apart and rekeyed.
@@BoredLockpicker I just haven’t seen any wafer kits available unless it uses the same as other Toyota 80k. Which it didn’t list coverage for vehicles that only used this keyway style
Promo'SM
Huh?