I fought with anxiety for setting up sensitivities on my joystick to fly helicopters, the 407 and MD500e flew insanely! Then after picking my helicopter, I went to customization and moved them sliders! Boom! Flying way better. Nobody ever mentioned this option before!😮
This is the video I’ve been waiting for! Thank you Mark for all the help you give. I must be the only one who had no problem downloading on Xbox SX. I feel bad for everyone who had problems.
I can't understand why an organization like Micro$oft that releases both FS2020 and FS2024, doesn't offer the possibility to import all your FS-2020 profiles of the yokes, throttles, pedals into FS-2024. Probably not until 457 updates when everyone has reprogrammed everything. Unbelieveable Thanks for your patience Mark. Regards, Rotterdam, The Netherlands.
That is because the names of some functions have changed. For instance, the VFR MAP is gone, has been replaced by the tablet. I reprogrammed my VF1 yesterday, took me some hours to make everything work the way I set it up in FS20. But you cannot blame MS for this.
@@caskraker Exactly what I say. SOME functions have changed. But most of it is the same. Why are all the button numbers of the Yokes, Throttles shown in FS2020 but not in FS2024? Can't you blame MS for that? I realy think so. It is not without reason that FS2024's global rating is 1 star and that more than 34% want their money back.
I spent about 8 hours before your stream attempting to set my Bravo for parking brake and panel lights in the DC3. I really had trouble resolving conflicts, which you explained nicely in your stream. The backbreaker for me before your show was the different in Input and Search fields when creating a control. Thanks so much.
Thanks for all your helpful videos and honest commentary! I agree with you 100 % on Micro$oft’s launch failure. Very disappointing to the community. Keep up the good work!
Perfect video for a numpty like me mark. I watch all ur videos same as I do with huddison you both make ur videos very informative easy to follow as I have limited knowledge about pcs but love learning the sim. Looking forward to the next video from urself & Jim. Thx it’s a great help chers Paul 🏴👍😀
You're a real trooper, man! I applaud you for your selfless determination and patient willingness to push forward despite all the surprises that the sim threw at you. I was literally in stitches. 🤣 You know what they say about "misery"... Bottom-line: All very educational and helpful, too! Thank you, thank you!
@fishcakee1094 nah im not having any camera drift, alot of axis are inverted and crazy sensitivity. I've tried and failed following a complete controls setup guide for PC. Someone will put out a Xbox guide soon enough. Certainly isn't pick up and play
I set it up yesterday, only one problem that might be caused by a button not working properly. Programming the VF1 is actually easier than in FS20, because there it scanned combos which weren’t pressed. In the new sim, that didn’t happen at all.
I was hoping you would get to pedals, didn't believe you actuall deleted it all, lol. Now THATS a Tutorial, Thank you....going to have to watch it about 3 times!
Mark when you are using your inset of the throttle quadrant We cant see some of the things you are doing because its hidden by that inset on the far right of the screen. Thank you for your videos they have been very helpful and informative. Just after I typed this you pulled the inset down and to the right thank you
I was a little shocked they didn’t allow a msfs2020 control preset configuration. Not against new key binds but man did it get me a while to feel fluid navigating their interface.
It does work. It doesn’t show the moves in the graph, but that was not very important anyway. It was only useful to check you had the right axis. Copying sensitivity took me 5 minutes.
O Mark, You just cost me 264 quid I've just ordered a Bravo Throttle Quad. lol. Friday for me when things started going in a positive direction. Who needs a 4090 or for that matter a new 5000 series when they come out. My 2080 is doing the job just fine. So go on waste your money folks. Great video as always Mark. I was struggling with my control setup and this vid has helped a lot.
Very useful video. Yes, in hardware, moving the different axises doesn't show anything moving in FS2024 controls axis setup. As for the keyboard, if it is possible to use the FS2020 keyboards settings, why did they do different FS2024 keyboards settings? Is there a way to print all the new FS2024 keyboards settings? Also, replacing y for slew by a combination of keys is tricky: bad enough to press 1 key, then 2 keys is cumbersome. What have they been smoking? Or, am I missing something? (too many commands in FS2024?)
It's confusing if you want to configure only 2 jet engines without first configuring for 4 jet engines. If you have aftermarket 3-d throttle handles and full-on Boeing kit (spoiler, 0-40 flap detents) already installed, Mark's build for 4 then clone for 2 video was not helpful. Also problems setting up the reversers when using the 3rd party throttle handles which have left and right reversers, left and right toga buttons and left and right auto throttle cancel buttons all programmable...
Hello Marc, have you ever tried AXIS & OHS? It makes assigning controllers much easier and faster. You can create templates for controllers and connect the aircraft to these templates. Then, any change to the template is applied to all aircraft. On a quarter of a screen, the entire configuration of an aircraft is displayed clearly. The profiles are automatically loaded with the aircraft. The best part is that you can also take over the profiles from MSFS 2020. I have hardly any work with reconfiguring the controls.
I'm still at point zero with all of this. Not a single flight was possible. Can't get my Honeycomb Alpha and Bravo to work at all. No matter what I try. No response whatsoever. Sim still takes >5 Minutes to load. Whenever I start a flight, I randomly sit somewhere in the cabin. Sometimes on the floor, sometimes in the back... Today, my yoke actually worked after loading a flight. Unfortunately the red avatar from hell was standing right in front of the instrument panel, proudly holding his ERROR sign. When I try to customize my identity, the sim crashes. Trying to restart a flight, I end up spinning somewhere in the Milky Way, followed by three beeps and a message that I have crashed (I have crashed? No. The sim has crashed). All of this with standard Asobo planes (C172, Grand Caravan), on a PC above ideal specs and an internet connection of 250 Mbit / 15 ms ping. Empty community folder, of course. I was hoping that today's update would solve some of this, but no. I don't even know where to start submitting support tickets. It's just too much for me. I uninstalled today, went back to MSFS 2020 and will have a look at the forums once in a while to see if things have improved. Bye MSFS 2024 for now.
@@patenedwards1693 Tobii are still working on compatibility. In the interim check this out help.tobii.com/hc/en-us/articles/30239964379409-Known-Issue-Tobii-Eye-Tracker-5-not-working-as-expected-in-Microsoft-Flight-Simulator-2024
Yeah, I think the popular Textron Citation CJ4 is broken is MSFS2024. Rudder / Brakes are backwards, left/right toe brakes don't function independently , the bindings for them do not work properly.
One other comment: I thought I heard you mention that the AP wasn't working correctly in the Cessna 172. I just tried it and it seems to be ok for me, at least the way I used it in FS2020. I usually initially planned my flights in the World View, then finished up the arrival procedures in the G1000. The only difference I notice in FS2024 is that the ILS frequency for the selected runway has to be manually entered. Otherwise, the G1000 in concert with the autopilot behaved just like it did in FS2020. Of course this will probably all change after I learn how to use the EFB for flight planning. I am still a real novice in this game!
Each time I change a setting, the plane loses all controls, have to go back in the control settings and reassign all the devices. Anyone else have that issue? Sooooooo frustrating.
So who was the guy that said if your controller work for the 2020 version it will work for the 2024 version. I think that person disappeared when the SIM come out because my controller will not work properly at all with the 2024 version and I'm using Logiteck X52 which work perfectly with the 2020 version and they said it would work with this version but there's no way it's driving me crazy. If anyone has the answer please let me know
Hi Marc, Can you explain the distinction and idea between the 3 groups - General Controls, Airplane, “specific” model and what is Linked to each of these? Also the different modes - where to see if double bindings is a problem or not… Br Stephen Odgaard from EKCH.
Has anyone figured out how to pull the knobs on the Airbuses? Right click pushes them and left click turns them. There are no clickspots, so I am a bit lost.
Hey Mark! Great job on the stream today. My issue is that after getting in, as soon as I start clicking on just about anything, MSFS crashes. Have you heard of other having this problem? I'm up to over 20 CTDs so far.
I have had five CTDs so far. My interface screen with the world spinning rapidly behind it and moving like it is in orbit, while flashing lights could give me an epilleptic epiisode if I had that affliction. What a bloody mess!
in career mode missions it asks you to press enter to make radio calls (ie start taxiing) is there a way to map that to a key on my switch panel? (keyboard too far away)
For whatever reason, I can't get the GNS530 active in the Cessna 172 basic version (not with GNS1000). Turning the avionics swith button on and off makes no difference. so frustrating
I can assign the buttons on the top of my flight stick for the drone camerabut the all the forward and back and left and right axis is on the stick itself while not combined to the drone , is there a way
Lucky you’re not in the UK, UK users are still having major issues even getting into the game. What we need is more videos showing the complete c**k up this release has been.
@@SimHangerFS Thank you for replying, I too live in the South of the UK and can recognise most UK regional accents. I wasn't knocking you, but just want to bring the frustration of many UK committed simmers to the fore. I've been a MS Simmer form many years and love the idea of jumping in an aircraft and taking to the sky's. and love the Sim. What upsets me is the fact that a major corporation is all too keen to take our money but not so keen to publicly admit there has been a major issue, and not keeping their customers informed of the current situation. I wish you well and hope all goes well for your channel.
For those of you who are experiencing rudder issues. It is important to first select the rudder axis manually by clicking the gear icon on the right. Once you have the rudder axis set you go to each left and right rudder on the airplane box (first box) and scan and press the left and right side respectively. Same thing with the brakes. First make sure you have the axis selected and then the left and right brakes with the scanner on. Hope this helps.
Thanks, unfortunately this didn't work for me :( Somehow I was able to successfully configure all my controls in 2020 just by intuition and logic. But this??? Maybe it's just me being four years older now.
So is it true there are no empty profiles that can be created as a starting point as in 2020 ? (Especially useful if you use Spad or Axis and Ohs.) Did a committee decide that was a good idea ?
How can you get rid of the blue highlight when you mouse over things I can’t seem to find anything in these settings and I have everything turned off 😳
I can't get my camera controls right using my mouse. Anybody know why when I click right mouse to try to free look in cockpit view, my camera spins all around in the cockpit?
How do you delete the key bindings in the RIGHT HAND column? The joystick bindings on the left side seems easily deleted. But cannot resolve conflicts because of this.
I’m having an issue with the rudders not turning the aircraft while taxiing. It should control the nose wheel steering. I haven’t messed with any of the control settings, but by default the left turn works, but the right turn doesn’t work. What is going on? How do I fix that?
@DouglassFootball yes the same f... shit i have given this up for a while. i wil fly again when my new gaming computer is ready, with the 50xx serie of nvidia nextyear. and hoply this shitty 2024 alfa is fixed then. i think i wil try adk for refound, its not worh the money for premium deluxe
Hi Mark, great stream. How do you assign the Speed Brakes on the Bravo Throttle Quadrant I have tried but cannot seem to master it they either go on or off I cannot seem to assign Armed - 50% - Flight Detent this is for the 737 configuration, It just goes from Down to Up nothing in between thank you very much
@SimHangerFS thank you I was actually trying to do it on the speed brake itself that's where I was going wrong thank you. Are you doing a stream on how to assign the throttles reverse thrusters etc like you did for MSFS2020? That would be very useful 😁
Hi Mark, As always thanks for your content. Do you know if there is the availability to not stream data, and download most everything to make it run smoother? Thanks Again
MFS 24 launch beats the worse launch of cyberpunk 2077 and that is saying something. We have reached a new low in how games are pushed out now, worse than fall out 76, it beats them all.
Great video but I have a situation. I never flew a G36, I did the walkaround and everything checked out. But I am unable to get in the plane. The door is on the co-pilot side so I went around looking for what to click on to get in the pilot seat. i see nothing. Im lost here..lol
Fly free flight and leave the career as it is. It is just a stupid game mode and not a real challenge. To get your PPL a standard circuit is all it takes. That is not realistic at all.
@caskraker it was in free flight, at a fuel pump location, walked around and I was April to open the co-pilot side and the passenger door on the right. I'm looking around like crazy to see what I have to click on to get in and the only handles I see are the co-pilot door handle and the passenger door handle, again both on the right side of the plane.
Anyone else having an issue on xbox where they load in and it's on the walk around and despite changing the controls can't enter the cockpit? It's really annoying me I was wondering if anyone had a solution
You complained about MSFS putting conflict numbers over keybind buttons then you put out a video with an inset of your quadrant covering up what you're describing . . . ?
I must admit once I got it working it's great. The only problem I have is when you spawn into parking spot I'm sat in the bottom of the aircraft with no way to alter it. Any ideas?
HELP! Im using a velocityone flight stick and everytime i go into cockpit mode the camera drifts. i loaded up msfs 2020...no camera drift. So its not my hardware. is anyone else getting this issue?
Early download / startup. Problems - so what!!! Of course we're excited. Of course we want to get going RIGHT NOW. But designing systems to handle a full peak of downloads and operations that likely won't occur again until 2028 would be just dumb. On the other hand, if it doesn't smooth out in a week or so, then I'll move to the side of the Why didn't you get it right already! crowd.
I thought MSFS 2024 was supposed load faster than 2020, this is not what I''m experiencing. It's been taking more than 30 minutes for 2024 to load. At first I thought it was because of the super high number of simmers trying to log -on at the same time, but now 3 days in, I don't think that's the case. I'm running on a very high end computer with a lot of NVME disc space and high bandwidth internet. AMD 58003D, 4090, 2 TB of NVME storage. Is anyone else experiencing this? I've watched numerous RUclips videos since the launch and no one has mentioned this as an issue, and what can I do to fix it??
For me, the fastest loading time was about 5 min. yesterday. Average is about 10 to 15 min. And I had to load it often because of all the Crashes. I gave up now. Back to 2020.
It's so bad that I asked for a refund. After all the hype, what a bunch of crap, they tried being everything to all people and ended up being nothing to most people.
The Sim will test your patience to set up all these categories to have a flight …it’s a nightmare.. they better make this easier to fly an aircraft…
I fought with anxiety for setting up sensitivities on my joystick to fly helicopters, the 407 and MD500e flew insanely! Then after picking my helicopter, I went to customization and moved them sliders! Boom! Flying way better. Nobody ever mentioned this option before!😮
This is the video I’ve been waiting for! Thank you Mark for all the help you give. I must be the only one who had no problem downloading on Xbox SX. I feel bad for everyone who had problems.
I can't understand why an organization like Micro$oft that releases both FS2020 and FS2024, doesn't offer the possibility to import all your FS-2020 profiles of the yokes, throttles, pedals into FS-2024.
Probably not until 457 updates when everyone has reprogrammed everything.
Unbelieveable
Thanks for your patience Mark.
Regards,
Rotterdam, The Netherlands.
That is because the names of some functions have changed. For instance, the VFR MAP is gone, has been replaced by the tablet.
I reprogrammed my VF1 yesterday, took me some hours to make everything work the way I set it up in FS20. But you cannot blame MS for this.
yeah agreed. so far this game has been a nightmare, worst experice in gaming history
Couldn't agree more...ability to import 2020 settings...why not???? FFS
@@caskraker Exactly what I say. SOME functions have changed.
But most of it is the same.
Why are all the button numbers of the Yokes, Throttles shown in FS2020 but not in FS2024?
Can't you blame MS for that?
I realy think so.
It is not without reason that FS2024's global rating is 1 star and that more than 34% want their money back.
I spent about 8 hours before your stream attempting to set my Bravo for parking brake and panel lights in the DC3. I really had trouble resolving conflicts, which you explained nicely in your stream. The backbreaker for me before your show was the different in Input and Search fields when creating a control. Thanks so much.
Waste of time , I have no patience for it, going back to 2020!! hoping there will be some updates soon. 500mbps internet seems it's no enough!
Thanks!
@@NormanHolden thank you so much Norman. 👍
@@SimHangerFS My pleasure Mark -- your videos and general advice have been invluable to me over the time I have been Flight Simming
Thanks for all your helpful videos and honest commentary! I agree with you 100 % on Micro$oft’s launch failure. Very disappointing to the community. Keep up the good work!
Mark you're an absolute legend
He definitely is! Watching him for more than year... maybe 2 and always coming back. Even if I'm using the sim since 2004.
Perfect video for a numpty like me mark. I watch all ur videos same as I do with huddison you both make ur videos very informative easy to follow as I have limited knowledge about pcs but love learning the sim. Looking forward to the next video from urself & Jim. Thx it’s a great help chers Paul 🏴👍😀
It’s amazing! I agree it’s a hassle to setup and some aircraft are better than others. The Saab 340 is brilliant!
You're a real trooper, man! I applaud you for your selfless determination and patient willingness to push forward despite all the surprises that the sim threw at you. I was literally in stitches. 🤣 You know what they say about "misery"...
Bottom-line: All very educational and helpful, too! Thank you, thank you!
Thanks in advance for Velocity One yoke help, and for all you do.
Having big troubles with the velocityone on xbox. Patience is definitely needed. Thanks for the video mate
Me to dude! By any chance are you getting camera drift while in cockpit mode. It's driving me insane
@fishcakee1094 nah im not having any camera drift, alot of axis are inverted and crazy sensitivity. I've tried and failed following a complete controls setup guide for PC. Someone will put out a Xbox guide soon enough. Certainly isn't pick up and play
I set it up yesterday, only one problem that might be caused by a button not working properly. Programming the VF1 is actually easier than in FS20, because there it scanned combos which weren’t pressed. In the new sim, that didn’t happen at all.
Please do one with the velocityone Mark 🙃
Thank Mark, very useful as usual
I was hoping you would get to pedals, didn't believe you actuall deleted it all, lol. Now THATS a Tutorial, Thank you....going to have to watch it about 3 times!
Mark when you are using your inset of the throttle quadrant We cant see some of the things you are doing because its hidden by that inset on the far right of the screen. Thank you for your videos they have been very helpful and informative. Just after I typed this you pulled the inset down and to the right thank you
I was a little shocked they didn’t allow a msfs2020 control preset configuration. Not against new key binds but man did it get me a while to feel fluid navigating their interface.
I wished ASOBO had spent another full year testing and fine tuning the Simulator before the official release.
@@RobertA-ns3fh couldn’t agree more…
I will be glad when we can download our previous purchases and the marketplace is online whenever that will be 😮
Tack!
@@FredrikN75 thanks for supporting the channel, you’re a star ⭐️
Raise a Pint or two for Mark for Braving 2024 HIP HIP HORRAAAYYYY
Thankyou for confirming the hardware sensitivity settings and curve options are broken. I hope they fix it soon.
It does work. It doesn’t show the moves in the graph, but that was not very important anyway. It was only useful to check you had the right axis. Copying sensitivity took me 5 minutes.
Great video and very helpful! Thank you!!
O Mark, You just cost me 264 quid I've just ordered a Bravo Throttle Quad. lol. Friday for me when things started going in a positive direction. Who needs a 4090 or for that matter a new 5000 series when they come out. My 2080 is doing the job just fine. So go on waste your money folks. Great video as always Mark. I was struggling with my control setup and this vid has helped a lot.
please make a video on xbox controllers always a big fan of your channel thank you so much Love from India
Great video, thanks
Very useful video. Yes, in hardware, moving the different axises doesn't show anything moving in FS2024 controls axis setup.
As for the keyboard, if it is possible to use the FS2020 keyboards settings, why did they do different FS2024 keyboards settings? Is there a way to print all the new FS2024 keyboards settings?
Also, replacing y for slew by a combination of keys is tricky: bad enough to press 1 key, then 2 keys is cumbersome. What have they been smoking? Or, am I missing something? (too many commands in FS2024?)
Cant wait for the bravo jet config video
It's confusing if you want to configure only 2 jet engines without first configuring for 4 jet engines. If you have aftermarket 3-d throttle handles and full-on Boeing kit (spoiler, 0-40 flap detents) already installed, Mark's build for 4 then clone for 2 video was not helpful. Also problems setting up the reversers when using the 3rd party throttle handles which have left and right reversers, left and right toga buttons and left and right auto throttle cancel buttons all programmable...
How do u invert the camera and direction? I have an x box w flight stick no pedals.
Thanks a lot, @simhangerFS, very useful, as always
Hello Marc, have you ever tried AXIS & OHS? It makes assigning controllers much easier and faster.
You can create templates for controllers and connect the aircraft to these templates. Then, any change to the template is applied to all aircraft.
On a quarter of a screen, the entire configuration of an aircraft is displayed clearly.
The profiles are automatically loaded with the aircraft.
The best part is that you can also take over the profiles from MSFS 2020. I have hardly any work with reconfiguring the controls.
Hi Marc,
Regarding the cache clearence, i believe it is the day of the month - not the duration between each clearence.
BR
Stephen from EKCH
Mark...I'm having a problem with my bindings not saving...which is super annoying. Any idea why that might be?
@@trent_dyrsmid remember they are per aircraft unless you select apply to all aircraft or duplicate.
@@SimHangerFS Yes, I'm aware of that....and some of them still aren't saving. Driving me nuts!
I'm still at point zero with all of this. Not a single flight was possible.
Can't get my Honeycomb Alpha and Bravo to work at all. No matter what I try. No response whatsoever.
Sim still takes >5 Minutes to load.
Whenever I start a flight, I randomly sit somewhere in the cabin. Sometimes on the floor, sometimes in the back...
Today, my yoke actually worked after loading a flight. Unfortunately the red avatar from hell was standing right in front of the instrument panel, proudly holding his ERROR sign.
When I try to customize my identity, the sim crashes.
Trying to restart a flight, I end up spinning somewhere in the Milky Way, followed by three beeps and a message that I have crashed (I have crashed? No. The sim has crashed).
All of this with standard Asobo planes (C172, Grand Caravan), on a PC above ideal specs and an internet connection of 250 Mbit / 15 ms ping. Empty community folder, of course.
I was hoping that today's update would solve some of this, but no.
I don't even know where to start submitting support tickets. It's just too much for me.
I uninstalled today, went back to MSFS 2020 and will have a look at the forums once in a while to see if things have improved.
Bye MSFS 2024 for now.
Great tutorial from Sim hanger as usual. Thanks for your time and patience. Was wondering if there was any video for the tobii eye tracker in fs2024
@@patenedwards1693 Tobii are still working on compatibility. In the interim check this out help.tobii.com/hc/en-us/articles/30239964379409-Known-Issue-Tobii-Eye-Tracker-5-not-working-as-expected-in-Microsoft-Flight-Simulator-2024
Yeah, I think the popular Textron Citation CJ4 is broken is MSFS2024. Rudder / Brakes are backwards, left/right toe brakes don't function independently , the bindings for them do not work properly.
One other comment: I thought I heard you mention that the AP wasn't working correctly in the Cessna 172. I just tried it and it seems to be ok for me, at least the way I used it in FS2020.
I usually initially planned my flights in the World View, then finished up the arrival procedures in the G1000. The only difference I notice in FS2024 is that the ILS frequency for the selected runway has to be manually entered. Otherwise, the G1000 in concert with the autopilot behaved just like it did in FS2020. Of course this will probably all change after I learn how to use the EFB for flight planning. I am still a real novice in this game!
@@AreDee-vo6yq autopilot not working in the basic version only.
Each time I change a setting, the plane loses all controls, have to go back in the control settings and reassign all the devices. Anyone else have that issue? Sooooooo frustrating.
Help ! … thanks already Mark
So who was the guy that said if your controller work for the 2020 version it will work for the 2024 version. I think that person disappeared when the SIM come out because my controller will not work properly at all with the 2024 version and I'm using Logiteck X52 which work perfectly with the 2020 version and they said it would work with this version but there's no way it's driving me crazy. If anyone has the answer please let me know
Tell me Mark why nothing was said when the chosen few went for the alpha testing. Was the sim problem free then?
Hi Marc,
Can you explain the distinction and idea between the 3 groups - General Controls, Airplane, “specific” model and what is Linked to each of these?
Also the different modes - where to see if double bindings is a problem or not…
Br
Stephen Odgaard from EKCH.
Has anyone figured out how to pull the knobs on the Airbuses? Right click pushes them and left click turns them. There are no clickspots, so I am a bit lost.
Hey Mark! Great job on the stream today. My issue is that after getting in, as soon as I start clicking on just about anything, MSFS crashes. Have you heard of other having this problem? I'm up to over 20 CTDs so far.
@@trent_dyrsmid no, I had three this morning up to the stream from the flight loading screen.
I have had five CTDs so far. My interface screen with the world spinning rapidly behind it and moving like it is in orbit, while flashing lights could give me an epilleptic epiisode if I had that affliction. What a bloody mess!
in career mode missions it asks you to press enter to make radio calls (ie start taxiing) is there a way to map that to a key on my switch panel? (keyboard too far away)
🎉Fast forward to 5:39 that’s when commentary starts. 🎉
For whatever reason, I can't get the GNS530 active in the Cessna 172 basic version (not with GNS1000). Turning the avionics swith button on and off makes no difference. so frustrating
@@CrazyPilot_from_Belgium yes, me too. It is a MSFS24 bug.
Can you do a video on the velocity fight stick one. Am just lost.
I can assign the buttons on the top of my flight stick for the drone camerabut the all the forward and back and left and right axis is on the stick itself while not combined to the drone , is there a way
Think I'll go back to msfs 2020 for 6 months until they sort this mess out.
How do you set the tiller to work with rudder pedals?
Lucky you’re not in the UK, UK users are still having major issues even getting into the game. What we need is more videos showing the complete c**k up this release has been.
I am in the UK! 🤕
@@SimHangerFS Thank you for replying, I too live in the South of the UK and can recognise most UK regional accents. I wasn't knocking you, but just want to bring the frustration of many UK committed simmers to the fore. I've been a MS Simmer form many years and love the idea of jumping in an aircraft and taking to the sky's. and love the Sim. What upsets me is the fact that a major corporation is all too keen to take our money but not so keen to publicly admit there has been a major issue, and not keeping their customers informed of the current situation. I wish you well and hope all goes well for your channel.
@@scpcomps I agree with you totally...suggestion use a VPN...it worked wonders for me. I think it thinks im in Malta 🤣
For those of you who are experiencing rudder issues. It is important to first select the rudder axis manually by clicking the gear icon on the right. Once you have the rudder axis set you go to each left and right rudder on the airplane box (first box) and scan and press the left and right side respectively.
Same thing with the brakes. First make sure you have the axis selected and then the left and right brakes with the scanner on. Hope this helps.
Thanks, unfortunately this didn't work for me :(
Somehow I was able to successfully configure all my controls in 2020 just by intuition and logic.
But this??? Maybe it's just me being four years older now.
So is it true there are no empty profiles that can be created as a starting point as in 2020 ? (Especially useful if you use Spad or Axis and Ohs.)
Did a committee decide that was a good idea ?
No. You can copy the default profile and clear that. It is really not bad, even a lot better than FS20.
How can you get rid of the blue highlight when you mouse over things I can’t seem to find anything in these settings and I have everything turned off 😳
Please can you do a velocity 1 like you did for the Xbox ms2020 version that once easily to follow thank you for all your videos which really help out
On Xbox SX I can’t get the mouse to move around the cockpit. I can zoom with the wheel but nothing else. I would love some help with that.
Change Aircraft can be done in flight by using this topic in
the developer mode
I can't get my camera controls right using my mouse. Anybody know why when I click right mouse to try to free look in cockpit view, my camera spins all around in the cockpit?
How do you delete the key bindings in the RIGHT HAND column? The joystick bindings on the left side seems easily deleted. But cannot resolve conflicts because of this.
Keyboard in 2024 transversal under General & Aircraft.
I’m having an issue with the rudders not turning the aircraft while taxiing. It should control the nose wheel steering. I haven’t messed with any of the control settings, but by default the left turn works, but the right turn doesn’t work. What is going on? How do I fix that?
@@jay18fan check your assists - sounds like auto rudder is on.
@ I did check that, it’s not on. :/ I’ll re look at it again later today
Have you found out how you can get aroun in the cokpit? before we could move with the arrows and also up/down
I just noticed that I cannot move up or down in the seat also.....
@DouglassFootball yes the same f... shit i have given this up for a while. i wil fly again when my new gaming computer is ready, with the 50xx serie of nvidia nextyear. and hoply this shitty 2024 alfa is fixed then. i think i wil try adk for refound, its not worh the money for premium deluxe
Hi Mark, great stream. How do you assign the Speed Brakes on the Bravo Throttle Quadrant I have tried but cannot seem to master it they either go on or off I cannot seem to assign Armed - 50% - Flight Detent this is for the 737 configuration, It just goes from Down to Up nothing in between thank you very much
You need to arm it manually. For the spoilers you ideally need to assign it to an axis.
@SimHangerFS thank you I was actually trying to do it on the speed brake itself that's where I was going wrong thank you. Are you doing a stream on how to assign the throttles reverse thrusters etc like you did for MSFS2020? That would be very useful 😁
Hi Mark, As always thanks for your content. Do you know if there is the availability to not stream data, and download most everything to make it run smoother? Thanks Again
@@wildelorme4409 yes you can, will be available once marketplace comes on line.
MFS 24 launch beats the worse launch of cyberpunk 2077 and that is saying something. We have reached a new low in how games are pushed out now, worse than fall out 76, it beats them all.
I would like to see how you set up the Airbus aircraft.
i am not getting live signal from the controller in the setting dialog either. So doing it blindly
That's why I never ever buy or download any software on the first day available. Patience is a virtue, which always pays off.
Almost perfect: 5 seconds short of 1:23:45 in stream length 😄
Thank you
Thx for the video. 2 questions.
1. Do the bravo lights work?
2. Have you been able to configure the tobii eye tracker?
Thx
@@micgrech Bravo lights not working. I copied the AFC Bridge to 2024. No success. Haven’t tried the Tobii yet…so much to test still!
@@micgrech This May help help.tobii.com/hc/en-us/articles/30239964379409
@@SimHangerFSit does....thank you
Great video but I have a situation. I never flew a G36, I did the walkaround and everything checked out. But I am unable to get in the plane. The door is on the co-pilot side so I went around looking for what to click on to get in the pilot seat. i see nothing. Im lost here..lol
Fly free flight and leave the career as it is. It is just a stupid game mode and not a real challenge. To get your PPL a standard circuit is all it takes. That is not realistic at all.
@caskraker it was in free flight, at a fuel pump location, walked around and I was April to open the co-pilot side and the passenger door on the right. I'm looking around like crazy to see what I have to click on to get in and the only handles I see are the co-pilot door handle and the passenger door handle, again both on the right side of the plane.
Just clear the whole default setup and start fresh. It will take a few hours but it will save you a lot of time.
I found my TrackIR & the game had to be on Administrator and the game named for the profile, for them to see each other.
Anyone else having an issue on xbox where they load in and it's on the walk around and despite changing the controls can't enter the cockpit? It's really annoying me I was wondering if anyone had a solution
We cant see below the bravo picture
I cannot even get to my cockpit view to start. Any suggestions
Same here
You complained about MSFS putting conflict numbers over keybind buttons then you put out a video with an inset of your quadrant covering up what you're describing . . . ?
I must admit once I got it working it's great. The only problem I have is when you spawn into parking spot I'm sat in the bottom of the aircraft with no way to alter it. Any ideas?
Same here, I think it's walkaround mode but I can't move, just look around.
Anybody have ideas for cockpit zoom on Xbox controller? In 2020 I used RB and RS left and right but in 2024 it also moves the camera while zooming
Where is the slew mode I have to go to work I just need to know what to click on to put a button for slew mode. On Xbox!! Lol
Shift X I think
HELP! Im using a velocityone flight stick and everytime i go into cockpit mode the camera drifts. i loaded up msfs 2020...no camera drift. So its not my hardware. is anyone else getting this issue?
@@fishcakee1094 suggest you increase your deadzone on the axis. This will solve it. Also make sure assists are off.
Early download / startup. Problems - so what!!! Of course we're excited. Of course we want to get going RIGHT NOW. But designing systems to handle a full peak of downloads and operations that likely won't occur again until 2028 would be just dumb. On the other hand, if it doesn't smooth out in a week or so, then I'll move to the side of the Why didn't you get it right already! crowd.
Hello, dof reality doesn't work with msfs 2024 yet, right?
@@warjunkie1326 haven’t tried yet.
@@SimHangerFS It works with the new beta version.
Hi All. How to change the assigned key, how do I do it? I do not want to replace it I want to remove a single assigned key.
click the cog next to the assigned key as shown and from the menu select delete
@@SimHangerFS OK. And how to remove the Digital Assigned Button?
I thought MSFS 2024 was supposed load faster than 2020, this is not what I''m experiencing. It's been taking more than 30 minutes for 2024 to load. At first I thought it was because of the super high number of simmers trying to log -on at the same time, but now 3 days in, I don't think that's the case. I'm running on a very high end computer with a lot of NVME disc space and high bandwidth internet. AMD 58003D, 4090, 2 TB of NVME storage.
Is anyone else experiencing this? I've watched numerous RUclips videos since the launch and no one has mentioned this as an issue, and what can I do to fix it??
For me, the fastest loading time was about 5 min. yesterday. Average is about 10 to 15 min. And I had to load it often because of all the Crashes.
I gave up now. Back to 2020.
Is your hf8 seat working with fs2024?
@@charleskaufman3892 not tested yet.
👍😊
controller setup sucks.does not show numbers on my x-56
I pre purchased still can not download 97% and stuck so it's disappointing
@@roysole3294 try restart
X out or restart your system or reload it, hard restart too
Uninstall from steam and start all over been the on and off for 2 days
It's so bad that I asked for a refund. After all the hype, what a bunch of crap, they tried being everything to all people and ended up being nothing to most people.
Why can’t this be straight forward like X Planes. SMH.
I am still stuck on 97%
It's not flawless? It's a joke!
dude.. you are extremely long winded.. im just here for the how to set up.. i dont need the story of your life the past 48 hours. this is rediculous
Mark are you breaking Sims lol
@@jcalof 🤣
What is so amazing? You get it free ?
Having fun yet?
big money grab. did not need to release an unfinished product. will buy when they finish it. back to 2020
You make an vid in something that could of been explained in 10 mins