1:30 There's also an HDR Toggle as well, but for some reason this install isn't showing it, even though my output is HDR. The other computer that I play on DOES have the HDR menu, but as of recording, it appears to not be finished yet.
Just a heads up capping the fps to 60 (ik you spoke about being able to turn it off) and having vsync enabled will of course have input lag but it will actually do the opposite of what vsync does so you will more than likely get screen tearing
I haven't experienced that with the settings shown. HOWEVER when I'm recording, OBS doesn't like any input from a source with over 60 fps, and since RUclips for some reason still doesn't accept other frame rates higher, that's where my gameplay is capped at.
thats not right at all. vsync basically does the same thing (if you have a 60hz monitor). it just locks the framerate to your monitors refresh rate. ive played a bunch of games with both a framerate lock and vsync without any kind of screen tearing.
@whk2518 oh you mean besides the brackets where I stated "ik you said you can change it" oh would you look at that it says you clearly directed towards him and not you so howabout you leave your snotty 10 year old comments clear hum
with the control setup for my wheel it was blank, i tried the unplug thing and didn't work. i didn't want to remap the panel and wheel so i took the inputBinding.xml from 22 and put it in the 25 version of the game
I wish they added Vr support and for the people that tell it’ll be hard it wouldn’t open xr is a thing set down a 360 camera anchor map it to the headset and boom your done but it would be awesome I hope it’ll come someday
I have a 4090 and 13700k. On ultra settings(dialed back a touch), I can't get over 100fps at ultrawide 1440p. I'm assuming it's a massive cpu bottleneck because the fans barely turn on on my gpu, seems like some optimizing on Giants' end would be helpful.
Honestly you don’t need over 100. I have a 4090 too. Lock to 60, turn all settings up to max and it runs great. If you really want more frames after that, use lossless scaling to add them in
@ buddy ol pal, I didn’t build a $3,500 system and a $1,400 240hz OLED display to get 60fps. I get what you’re saying, it’s not a competitive multiplayer shooter so frames aren’t the most important, but going from 160+ fps to 60 is a kick in the gut. There was no optimization done at all for this game, hopefully they can fix that soon.
@@tylerjames8836 I spent the same man but the physics go weird over 60fps, always has done. Better to lock it and have massive headroom and it run nice and smooth
Mine defaulted the settings to Very High, and it looks good for the most part other than a few things. I get a fair amount of ghosting, and screen flickering. Also the rain looks awful and grainy. Any ideas?
Yes, but keep in mind your settings will likely stay the same when you move maps, at least they have before. But once you save the game, you should be good.
i have bad ghosting and only solution i can find is turning on that DLAA option but i have an amd card so don't have the option and removing TAA also removes ghosting but that gives my ground textures a weird grainy/noisy effect. can't win lol.
@@phonselyback it off a little. Like use 130% or 150% instead of 200%, for the distances. Use FSR3 too. It took away my flickering and graphical errors. I’m locking 60 fps with vsync on and I have a 3060ti, only 8 GB of VRAM. Long story short I can run 1440p at “very high”(custom). I’m happy with that. Just go through each setting make small changes. I was trying ultra, also tried 4k it just wasn’t happening unfortunately 😂. FS22 I honed everything in and could run 4k believe it or not
It's going to struggle. YES it will will, but I don't know what to expect. I would assume it will run fine at 1080 medium settings, which are perfectly fine for most players.
1:30 There's also an HDR Toggle as well, but for some reason this install isn't showing it, even though my output is HDR. The other computer that I play on DOES have the HDR menu, but as of recording, it appears to not be finished yet.
YESSSSSSSSSSSSSSSSS REALISTIC BEACONS
Does it work at maximum graphics on a raizen 7 8845hs and rtx 4070??
I think you will get about 30 / 50fps
@@florider2904 what ? i get 80 fps with a 2080s lol
I'm getting around 130 fps with 4070 super and 5600x at 1440p, all ultra settings
@@fridjon13 yeah this guy isnt super good in terms on PC config xD
anyone know why i cant see lime/effects of rolling up close but it renders far away?
Will acres work on PlayStation? I tried turning it on for FS 22 but it kept saying Hector‘s. Instead of acres
Please help! I can't seem to find the dynamic shadow options. The settings which the tractor will have shadows coming from another vehicle's light
Just a heads up capping the fps to 60 (ik you spoke about being able to turn it off) and having vsync enabled will of course have input lag but it will actually do the opposite of what vsync does so you will more than likely get screen tearing
I haven't experienced that with the settings shown. HOWEVER when I'm recording, OBS doesn't like any input from a source with over 60 fps, and since RUclips for some reason still doesn't accept other frame rates higher, that's where my gameplay is capped at.
thats not right at all. vsync basically does the same thing (if you have a 60hz monitor). it just locks the framerate to your monitors refresh rate. ive played a bunch of games with both a framerate lock and vsync without any kind of screen tearing.
@whk2518 he doesn't have a 60hz monitor. That's the whole reason for me writing this comment so yes it is right.
No, because you phrased that as if it would be the case for everyone, which it isnt.
@whk2518 oh you mean besides the brackets where I stated "ik you said you can change it" oh would you look at that it says you clearly directed towards him and not you so howabout you leave your snotty 10 year old comments clear hum
What graphics card are you running?
He said a strix 4090
Does the USB beacon light from the FS22 Collector's Edition work in FS25? I hope so.
it does
@djgohamgaming is the process for relocating the mod folder same as FS22 ?
with the control setup for my wheel it was blank, i tried the unplug thing and didn't work. i didn't want to remap the panel and wheel so i took the inputBinding.xml from 22 and put it in the 25 version of the game
I wish they added Vr support and for the people that tell it’ll be hard it wouldn’t open xr is a thing set down a 360 camera anchor map it to the headset and boom your done but it would be awesome I hope it’ll come someday
I have a 4090 and 13700k. On ultra settings(dialed back a touch), I can't get over 100fps at ultrawide 1440p. I'm assuming it's a massive cpu bottleneck because the fans barely turn on on my gpu, seems like some optimizing on Giants' end would be helpful.
Honestly you don’t need over 100. I have a 4090 too. Lock to 60, turn all settings up to max and it runs great.
If you really want more frames after that, use lossless scaling to add them in
@ buddy ol pal, I didn’t build a $3,500 system and a $1,400 240hz OLED display to get 60fps. I get what you’re saying, it’s not a competitive multiplayer shooter so frames aren’t the most important, but going from 160+ fps to 60 is a kick in the gut. There was no optimization done at all for this game, hopefully they can fix that soon.
@@tylerjames8836 I spent the same man but the physics go weird over 60fps, always has done. Better to lock it and have massive headroom and it run nice and smooth
@@toadintheh0le so lock it to 60 and turn on vsync?
@@tylerjames8836 No vsync personally
Jag undrar var man ställer in så mic på FS 25? det fungerar i Win o Discord men inte FS25.
I have a PC and it’s an Intel seven it has a Nvidia GeForce GXT in it. Will it work to play for simulator 25
Hello , do you have any ideea why only full hd graphics work and wont save 1440p ...
Hellooo does someone know how you can Connect te controller correct in fs25. Now I have to do every keybind one by one
steam has that by default just plug n play
Mine defaulted the settings to Very High, and it looks good for the most part other than a few things. I get a fair amount of ghosting, and screen flickering. Also the rain looks awful and grainy. Any ideas?
Those this mean we can finally have us units for a us map and eu units for an eu map?
Yes, but keep in mind your settings will likely stay the same when you move maps, at least they have before. But once you save the game, you should be good.
@@DjGoHamGaming that a very welcome change for people like me that like playing German maps and us maps
Laptop i7 13700hx rtx 4060 8gb custom ultra? or very high options?
Thank you sir
My pedals dont work but they are detected help
R.I.P my GTX 1650 🫡 (I hope I will not get less than 30 fps)
Edit: I get 40-50 fps on medium graphics, not bad 👌
I have max 20fps with a 1650
Yeah mine sucks. Might have to get new PC
@@CarsynKoenigmine works ok
@@paulkrelart103060fps with high-med
@@paulkrelart1030 turn on framegen frs you most likely double that
i have bad ghosting and only solution i can find is turning on that DLAA option but i have an amd card so don't have the option and removing TAA also removes ghosting but that gives my ground textures a weird grainy/noisy effect. can't win lol.
I guess my Simagic alpha mini isn’t compatible with force feedback 😢
Where can you change the singleplayer language? by default it's Dutch, but I need English .
I have an rtx 4050 6gb. I believe it should be enough with FSR I hope
with an nvidia card, you should probably use dlss. its just more optimised most of the time and generally works better.
i have 3060 12gb and get a stuttery laggy mess
@@phonselyback it off a little. Like use 130% or 150% instead of 200%, for the distances. Use FSR3 too. It took away my flickering and graphical errors. I’m locking 60 fps with vsync on and I have a 3060ti, only 8 GB of VRAM. Long story short I can run 1440p at “very high”(custom). I’m happy with that. Just go through each setting make small changes. I was trying ultra, also tried 4k it just wasn’t happening unfortunately 😂. FS22 I honed everything in and could run 4k believe it or not
Will a gtx 1660 super be ok with a good cpu? Or will this make it run bad?
It's going to struggle. YES it will will, but I don't know what to expect. I would assume it will run fine at 1080 medium settings, which are perfectly fine for most players.
i know some freaks play on 60pov but why you? im confused
Does anybody get blurry textures ?
shaders need to load play around 10 minutes do some 360 and fast forward alot
@@buddhabob64eso no sirve de nada, estuve como siete horas y las texturas seguían borrosas.
not work 1920X1080p
How will we understand without the Canadian in front of Canadian Dollars!? 😉
no rtx framegeneration ? 😭
no, because they are still using the outdated dlss 2 instead of dlss 3.5.
@@whk2518thats not the reason, rt can be used without dlss
@@florider2904 yes, but ray tracing =/ framegen
This game only uses FSR1?! Why? That is old and crap. Why not FSR3.1 or whatever the newest is?
He literally showed that there's fsr1, fsr3 and fsr3 frame generation 💀
💀
Can u get mods yet
No, we have to wait about a month till we start getting mods
@ thanks I think there’s government subsidies
@@kevinsheridan-j4c yeah I’m pretty sure
@@Ponchoblatzthere are a few mods after 1 hour
You can now
Canada uses dollars, Mexico uses pesos.
WHY is withering option still removed??? This is completely STUPID!!!
Technically, withering is removed. If you turn off seasonal cycles, your crop won't wither.
No realistic Becons I see
It’s there. I go over it in the video.
5:50