Instead of throwing the silicone mold out, cut it into little cubes. You can reuse them during your next silicone pour (of any size). Just fill up the cavity of your best pour with the cubes, and then pour the silicone over that. You will use much less silicone mixture that way.
Instead of throwing the mold out he could've broken the wooden bracing off before releasing the concrete base then made new bracing using fibreglass with a split in the middle so it can be removed and put back together easily.
@@jameslucas3161 With a bit of though he could have built a frame to hold the mold and then built a custom frame for the inside and pour another silicone mold for the inside. Then a custom X with 4 pins in them for the dowels to hold the top in place. Some wire mesh set in the middle of the form should be more than enough to keep if from breaking. A concrete vibrate tool to get the bubbles out and you have a mold that can be broken down and used again. The time and effort put in to this is enough to build a couple dozen tables of a number of colors and table tops and sell them for around 500 to 1500 dollars depending on the wood type and design top.
For people looking to do similar, use ALGINATE instead. It's a throw away molding agent. Instead of wasting $1.5k on silicone like this guy did only to throw the mold away, alginate would have cost a quarter of this, and you can throw it away after, it's just a seaweed mix.
I was in the middle of writing an email asking if I could drive myself to Oregon to pick up that mold you were gonna throw out, when I saw you cut it up I sighed and discarded the draft lol. Great work, it looks awesome!
Loving the look of the table! That's alot of work but totally worth the effort!! Just FYI, you can take that used silicone, cut it up and use it in other projects. You can add it as "filler" when you have another large pour and it will save you a ton on new silicone! Anyway, loving your saltbox table and have a great weekend!
Whew, when he said he was going to throw it all away it made my heart (or more accurately, my wallet, lol) cry out in pain. Had to make sure someone made this suggestion.
@@roguered706 Yeah, that would be aLOT of money going in the trash!! I may or may not have had a "shout at the screen" moment when he said it was getting pitched!! LOL
@@barneybarney9124 I've never tried that myself, but seems like it would be almost impossible with the fluting. I don't think the sand would maintain the ridges.
Why don’t people use similar “aggregate” in their initial molds? Does it have to be actual cured silicone to work as filler, or could you use something like styrofoam?
It’s awesome that you got your son involved, we have to teach the next gen! Using a reciprocating saw without a blade to remove the air bubbles is my go to as well. Great innovative build! 👍
Jason, what a beautiful table. have you considered putting a coat of silicone between the concrete base and your carpet so the lime in the concrete doesn’t leach into your carpet
If you do decide to scrap the silicone mold, don’t just throw it away - clean off residual mold release, cut it into small pieces and store it. Next time you make a big silicone pour (preferably same brand and type but mixing can work), you add those pieces as bulk filler, adding uncured silicone in between, thereby making substantial savings on fresh silicone. It does not negatively impact the new pour and the fresh silicone will fill any cavities as usual. You can reuse it the same way several times. is standard practice among many artists (in e.g. ceramic slip casting). Great project, thanks for sharing!
Love this table! It really suits the space well and looks amazing. I would consider making the top removeable and reuse the dowels to clad out the inside, then it could be used as a hidden bar
I saw your IG post on the table saw kickback.... thought that you would cover it in this video. I appreciate that you have talked about shop safety in the past and was a little surprised that you did not cover it in this video. All that aside, great project. I really like how it turned out. Thanks for sharing!
The first time you experience kickback really makes you understand table saw safety due to how scary it is. My first time was about a year after I got my saw and a big chonky piece of wood spun when it mounted the blade because I forgot to reinstall the riving knife after removing a dado stack. You better believe I never forgot to reinstall it ever again.
Very interesting project. Not sure if you see these comments or not, but I definitely recommend some kind of sealer on the concrete for when the first spill inevitably happens.
Check out a concrete supply store next time for form liner. They have a bunch of different designs. Rip it to size, line your ply wood form and pour. Or look at concrete stamps.
For doing curved pieces, get some bendy board, it’s plywood with the grain all running in the same orientation and this allows it to bend.You can get it with the grain running the full 8ft or 4ft direction.👍🏝️🇨🇦
So cool. Love it. If you haven't thrown the silicon pieces out, perhaps stick a section under the coffee table so you have it if you ever move or if you want/need to replace the rug, so you'd have a way to safely stand it up. Monday morning quarterbacking over here...
That's pretty cool! I was thinking maybe affixing a couple round slick steel furniture glides on the bottom, they are pretty low profile and you could scoot it around easier if you wanted. I love it when the foreman shows up. He's getting so big! Next project, making furniture for the treehouse. It needs something up there for sitting, eating snacks and playing video games.
There is a technique where you paint on the silicone, first liquid silicone then when you get a nice detailed first couple of layers you thicken the silicone so that you can put on thicker layers. Then, to save on silicone and so that the silicon mould can be thin enough to simple peel it off your finished piece you make a rigid outer shell. For this you could use plaster bandages or even better, fiberglass and resin to make rigid panels around the silicone mould. Would probably work for this and be way cheaper. A bit more complex though.
quite nice actually, the shape and color makes it soft and cloudy why the material adds strength and roughness, in the end they balance each other very well
Beautiful coffee table that I love. A mounting of this superb oak top on the invisible hinge would have been very useful to take advantage of the space inside. When I bang my foot or knee violently into mine, which must weigh around twenty kilos, I complain for two minutes and that's it. With this concrete, I'm in for a fracture, but I'd still love to have a table like this.
Mike is the expert in concrete furniture, and GFRC is the way to go. Hoo! Talk about "Concrete Christmas." That is gorgeous. Even though it's indoors, you should seal the concrete
I remember my dad doing something similar when I was a kid about 28 years ago, he made a concrete fountain for our pond and used plastic roof sheeting as a form and filled it with concrete, came out okay!
Just wanted to say, I love your videos. You're clearly very knowledgable and always doing something interesting, but the sense of humour and willingness to show your mistakes you bring makes you a favourite. Thanks for doing what you do!
Hi mate, ive used lots of silicone in the past. Next time before your concrete pour, take the silicone out the mould and then slice the silicone in a zigzag pattern. Silicone is very forgiving and will go back together very easily. Meaning when the concrete is set you can simply peal the silicone away from the concrete. This also then gives you a mould you can reuse over and over again. You can use ratchet straps or tape around the outside to hold the silicone in place without a wood form! Hope that helps :)
Very cool project! Also love the new shirt designs, you should make a hoodie version. Your hoodie is one of the most comfortable hoodies I’ve ever owned!
I love the results. You had the vision and made it 1st try, that is skill. I'd like to see this redone, yes, make another, but really minimize the silicone some how. I'm thinking build up a layer on the mold (center part, not outer), then fill the rest with concrete so you just need a thin layer. Its all you, good luck! lol
A section of sonotube, of the appropriate diameter, might have worked pretty slick for the interior cylinder form (also larger sonotube may have simplified construction of the outer cylinder) although it would have required a different technique to attach the top. I also initially thought you were planning on applying the dowels on the interior of the exterior form and the concrete base would have concave cylindrical flutes, instead of convex flutes, which seemed aesthetically cool to me. However, your final product looks very attractive and the closest thing to perfection that I could imagine! Great job and lots of good information!!
I’ve had an idea of using silicone to make a concrete nightstand with a wood top. Thanks for the inspiration and also the info on the concrete company. They might come in handy. Also, if you ever remake this project or if someone else does. You could make the inside a little cleaner and have the top be removable and you have a nice storage space for throw blankets or an extra bottle of bourbon for when you are watching tv.
You can cut it into chunks and bag it. If you do another project that needs a lot of silicone you can fill the mold with the chunks from this project. Then you can pour around the filler chunks. It makes it so you don’t need to use as much new silicone.
Kinda wild to make something that wastes quite so much non-renewable material. Would be interesting to see the same build but using clapboard technique or alginate or something.
That's a fricken awesome coffee table!!! I've watched all your videos. You are truly a teacher who inspires his students to bud cool and unique pieces. I had a thought about a twist to the coffee table.....cut out the center and add an inset to put rocks and fake or real plants into. Maybe some Cactus or small bushes no taller than approx 6" high....just a thought :) Thank you for all you put into your videos. Bourbon Cheers! Chris
You could use something mixed in the silicone to reduce the amount needed, what you used depends on thickness of the mold, ping pong balls, packing widgets etc.
I love the coffee table! The holes do make it look more like concrete than a painted faux surface. I think you could sell your silicone form locally for the cost of the silicone. There are definitely people who would buy it and make the box for it themselves. Your labor would be lost, but it would still be lost if you tossed the form in the can and at least you would recoup some of your $$.
The overall cost and time doesn't equate to an unreal looking coffee table. Wow tools most DIY's can't afford to buy. Ok you have it built if and only if I was going to craft this table I would have raised the oak top a bit and install a sub woofer in the round center making it a duo purpose coffee table sound system. That would be a nice touch.
11:25 17 gallons. That's $1545 in silicone alone, according to the link provided. Forget about the additional costs of everything else. That's not even close to being affordable for most, and you cut up the mold after a single use. Not many people are going to replicate this idea, it's simply too expensive...
Careful buying products from these youtubers.. they don't care about the products, only the paychecks they provide. Remember, they all pushed fake knives and deeds that were meaningless..
@@FJB2020 in this case it seems like products he's developed and uses for himself, not sponsor/ads like those products you mentioned. But I do 100% agree I never pay any attention to any sponsorships on any video and I don't think any creators really care beyond that paycheck when it comes to doing those ad spots.
I love it! You know you are going to have to move it every time your wife want to vacuum... I was concerned about how much that base was going to scrape up your flooring. I see you brilliant wife has layered her area rugs.
Very nice. Other than the math, it really doesn't LOOK like a project only a pro with expensive tools can complete. Thanks for the inspiration for my patio.
One suggestion for the silicone mould, could you have used on the ground over the steps to roll the table instead of lifting it, and then when you get to the small cut section, place the large section to continue rolling? Just an idea
Instead of throwing the silicone mold out, cut it into little cubes. You can reuse them during your next silicone pour (of any size). Just fill up the cavity of your best pour with the cubes, and then pour the silicone over that. You will use much less silicone mixture that way.
Instead of throwing the mold out he could've broken the wooden bracing off before releasing the concrete base then made new bracing using fibreglass with a split in the middle so it can be removed and put back together easily.
@@jameslucas3161 With a bit of though he could have built a frame to hold the mold and then built a custom frame for the inside and pour another silicone mold for the inside. Then a custom X with 4 pins in them for the dowels to hold the top in place. Some wire mesh set in the middle of the form should be more than enough to keep if from breaking. A concrete vibrate tool to get the bubbles out and you have a mold that can be broken down and used again.
The time and effort put in to this is enough to build a couple dozen tables of a number of colors and table tops and sell them for around 500 to 1500 dollars depending on the wood type and design top.
Came here to say the same thing. tyvm!
For people looking to do similar, use ALGINATE instead. It's a throw away molding agent. Instead of wasting $1.5k on silicone like this guy did only to throw the mold away, alginate would have cost a quarter of this, and you can throw it away after, it's just a seaweed mix.
I was in the middle of writing an email asking if I could drive myself to Oregon to pick up that mold you were gonna throw out, when I saw you cut it up I sighed and discarded the draft lol. Great work, it looks awesome!
That mold would make a great outdoor planter as well. Very cool.
OMG I love that idea.
Loving the look of the table! That's alot of work but totally worth the effort!! Just FYI, you can take that used silicone, cut it up and use it in other projects. You can add it as "filler" when you have another large pour and it will save you a ton on new silicone! Anyway, loving your saltbox table and have a great weekend!
Whew, when he said he was going to throw it all away it made my heart (or more accurately, my wallet, lol) cry out in pain. Had to make sure someone made this suggestion.
@@roguered706 Yeah, that would be aLOT of money going in the trash!! I may or may not have had a "shout at the screen" moment when he said it was getting pitched!! LOL
Could you use sand for the mould like you do when making an outdoor pizza oven?
@@barneybarney9124 I've never tried that myself, but seems like it would be almost impossible with the fluting. I don't think the sand would maintain the ridges.
Why don’t people use similar “aggregate” in their initial molds? Does it have to be actual cured silicone to work as filler, or could you use something like styrofoam?
It’s awesome that you got your son involved, we have to teach the next gen! Using a reciprocating saw without a blade to remove the air bubbles is my go to as well. Great innovative build! 👍
Nice project. The best part is being your son helping with the project. You also have a beautiful dog.
Nice? Thats one overly expensive silicon mold! If the bro was Gaudi, okay, but he's not.
@@jobbe-wijnenstop whining
Your patience is a virtue and the end product shows your handiwork. Beautiful!!
Always appreciate your no fear approach to trying new things. It turned out great.
Nice! That mold would make an awesome fire pit also I think
Jason, what a beautiful table. have you considered putting a coat of silicone between the concrete base and your carpet so the lime in the concrete doesn’t leach into your carpet
I enjoyed watching this video, and thank you for taking the time to make it. Your patient way of explaining how and why adds immensely to the content.
If you do decide to scrap the silicone mold, don’t just throw it away - clean off residual mold release, cut it into small pieces and store it. Next time you make a big silicone pour (preferably same brand and type but mixing can work), you add those pieces as bulk filler, adding uncured silicone in between, thereby making substantial savings on fresh silicone. It does not negatively impact the new pour and the fresh silicone will fill any cavities as usual. You can reuse it the same way several times. is standard practice among many artists (in e.g. ceramic slip casting). Great project, thanks for sharing!
So satisfying to watch that last dowel go into place
Love this table! It really suits the space well and looks amazing. I would consider making the top removeable and reuse the dowels to clad out the inside, then it could be used as a hidden bar
Dude! This is great! Way to think outside the ramekin!
Turned out looking pretty nice. Good choice trimming down the top
I saw your IG post on the table saw kickback.... thought that you would cover it in this video. I appreciate that you have talked about shop safety in the past and was a little surprised that you did not cover it in this video. All that aside, great project. I really like how it turned out. Thanks for sharing!
The first time you experience kickback really makes you understand table saw safety due to how scary it is. My first time was about a year after I got my saw and a big chonky piece of wood spun when it mounted the blade because I forgot to reinstall the riving knife after removing a dado stack. You better believe I never forgot to reinstall it ever again.
Simple elegance looks very nice! You are talented beyond measure.
Very interesting project. Not sure if you see these comments or not, but I definitely recommend some kind of sealer on the concrete for when the first spill inevitably happens.
I was going to say that...
Yes, concrete absorbs everything :) Speaking from experience.
@@brianreddeman951 Maybe Jason is planning to invite some less favoured relatives around.....
It's not concrete
Turned out beautifully.
Check out a concrete supply store next time for form liner. They have a bunch of different designs. Rip it to size, line your ply wood form and pour. Or look at concrete stamps.
INGENIOUS!! Flawless project Jason. Bravo!!
For doing curved pieces, get some bendy board, it’s plywood with the grain all running in the same orientation and this allows it to bend.You can get it with the grain running the full 8ft or 4ft direction.👍🏝️🇨🇦
15:42 this was impressive
Really nice the project that gets harder the more you look at it
What an extraordinary and beautiful piece of furniture! Outstanding job!
Awesome project, Jason! The concrete+oak combo sure works!
Beautiful table, looks awesome 😎
you can also cut up the silicone into small pieces and use it as filler material the next time you build any silicone molds
save your scrap silicone and cut it up into chunks, it can act as filler and reduce the amount of silicone you need for later pours.
So cool. Love it. If you haven't thrown the silicon pieces out, perhaps stick a section under the coffee table so you have it if you ever move or if you want/need to replace the rug, so you'd have a way to safely stand it up. Monday morning quarterbacking over here...
That's pretty cool! I was thinking maybe affixing a couple round slick steel furniture glides on the bottom, they are pretty low profile and you could scoot it around easier if you wanted. I love it when the foreman shows up. He's getting so big! Next project, making furniture for the treehouse. It needs something up there for sitting, eating snacks and playing video games.
Loving the content lately Jason you are killing it with the interesting projects!
There is a technique where you paint on the silicone, first liquid silicone then when you get a nice detailed first couple of layers you thicken the silicone so that you can put on thicker layers. Then, to save on silicone and so that the silicon mould can be thin enough to simple peel it off your finished piece you make a rigid outer shell. For this you could use plaster bandages or even better, fiberglass and resin to make rigid panels around the silicone mould. Would probably work for this and be way cheaper. A bit more complex though.
It actually looks amazing.
quite nice actually, the shape and color makes it soft and cloudy why the material adds strength and roughness, in the end they balance each other very well
was waiting for some drawer slides under the top for some hidden storage in the concrete base!
Beautiful coffee table that I love. A mounting of this superb oak top on the invisible hinge would have been very useful to take advantage of the space inside.
When I bang my foot or knee violently into mine, which must weigh around twenty kilos, I complain for two minutes and that's it. With this concrete, I'm in for a fracture, but I'd still love to have a table like this.
Mike is the expert in concrete furniture, and GFRC is the way to go.
Hoo! Talk about "Concrete Christmas." That is gorgeous.
Even though it's indoors, you should seal the concrete
I remember my dad doing something similar when I was a kid about 28 years ago, he made a concrete fountain for our pond and used plastic roof sheeting as a form and filled it with concrete, came out okay!
Just wanted to say, I love your videos. You're clearly very knowledgable and always doing something interesting, but the sense of humour and willingness to show your mistakes you bring makes you a favourite. Thanks for doing what you do!
you've outdone yourself again! Awesome work!
Hi mate, ive used lots of silicone in the past. Next time before your concrete pour, take the silicone out the mould and then slice the silicone in a zigzag pattern. Silicone is very forgiving and will go back together very easily. Meaning when the concrete is set you can simply peal the silicone away from the concrete. This also then gives you a mould you can reuse over and over again. You can use ratchet straps or tape around the outside to hold the silicone in place without a wood form! Hope that helps :)
I missed you last week.
Great job paid off in the end 🔥
It looks really fantastic in that living room. Good work, human.
OMG! Looks amazing!!
Very cool project! Also love the new shirt designs, you should make a hoodie version. Your hoodie is one of the most comfortable hoodies I’ve ever owned!
Very cool-looking, Jason.
I wonder if you could cut the rest of the mould a bit to use again but for some matching side tables for your table.
Turned out awesome!!
That's a super cool table! I'd 200% get one for my livingroom
I’m located in between Newport and Corvallis and just realized you’re just up the road!
Awesome build, absolutely love it!
I love the results. You had the vision and made it 1st try, that is skill. I'd like to see this redone, yes, make another, but really minimize the silicone some how. I'm thinking build up a layer on the mold (center part, not outer), then fill the rest with concrete so you just need a thin layer. Its all you, good luck! lol
A section of sonotube, of the appropriate diameter, might have worked pretty slick for the interior cylinder form (also larger sonotube may have simplified construction of the outer cylinder) although it would have required a different technique to attach the top. I also initially thought you were planning on applying the dowels on the interior of the exterior form and the concrete base would have concave cylindrical flutes, instead of convex flutes, which seemed aesthetically cool to me. However, your final product looks very attractive and the closest thing to perfection that I could imagine! Great job and lots of good information!!
Thanks Jason, love your show!
looks amazing its like gypsum candle holder
That is a beautiful coffee table! Wish I had one...
Nice painting! Coffee table too.
$2000 mold for the base plus labor “ I’m not made of money “
That was my first thought. That's a lot of silicone, I bet its expensive... I counted 14 bottles (x2) for the pour, the link says they are $106 each.
He could of searched how to make silicone molds
To be fair, it is tax deductible.
Beautiful job, man! Now you also have 75 oak hammer handles :)
Absolutely love this, I think is the top was a few millimeters (1/8 inch) above the base it would get a nice shadow line and look even better
Love your work. Love the new stuff you try.
Very cool, I'm glad your son has inherited your dance moves!
I’ve had an idea of using silicone to make a concrete nightstand with a wood top. Thanks for the inspiration and also the info on the concrete company. They might come in handy. Also, if you ever remake this project or if someone else does. You could make the inside a little cleaner and have the top be removable and you have a nice storage space for throw blankets or an extra bottle of bourbon for when you are watching tv.
Very cool! Love the textures, juxtaposition of industrial and earthy. Ha! It sounded good right? Great job
You can cut it into chunks and bag it. If you do another project that needs a lot of silicone you can fill the mold with the chunks from this project. Then you can pour around the filler chunks. It makes it so you don’t need to use as much new silicone.
I would've liked to see the inner cavity open up for storage but this was a cool idea and end result
Adding perlite to the concrete will make it lighter. I make big planters that I have to move around and perlite really helps reduce the weight.
My entire driveway and polebarn were done in fiber reinforced concrete. WAY cheaper than rebar and holds up great!
Beautiful piece!
Well done! I think that is a great-looking coffee table.
Nice piece! And now🤣 I finally know where all the worn out rugs that we throw away in Europe end up!
Great outcome, love it. I would love to know how much this actually cost you to make?
Kinda wild to make something that wastes quite so much non-renewable material. Would be interesting to see the same build but using clapboard technique or alginate or something.
Eh man that's how I felt too watching the entire thing lol
Great result
That's a fricken awesome coffee table!!!
I've watched all your videos. You are truly a teacher who inspires his students to bud cool and unique pieces. I had a thought about a twist to the coffee table.....cut out the center and add an inset to put rocks and fake or real plants into. Maybe some Cactus or small bushes no taller than approx 6" high....just a thought :)
Thank you for all you put into your videos.
Bourbon Cheers!
Chris
Looks good. Thanks for sharing.
Have you thought about sealing the concrete? If you spill something on it like red wine, she’s gonna stain.
The blue silicone would make an excellent rc car rock crawling addition. It flexibility would be awesome to change up the course.
You could use something mixed in the silicone to reduce the amount needed, what you used depends on thickness of the mold, ping pong balls, packing widgets etc.
I love the coffee table! The holes do make it look more like concrete than a painted faux surface.
I think you could sell your silicone form locally for the cost of the silicone. There are definitely people who would buy it and make the box for it themselves. Your labor would be lost, but it would still be lost if you tossed the form in the can and at least you would recoup some of your $$.
The overall cost and time doesn't equate to an unreal looking coffee table. Wow tools most DIY's can't afford to buy. Ok you have it built if and only if I was going to craft this table I would have raised the oak top a bit and install a sub woofer in the round center making it a duo purpose coffee table sound system. That would be a nice touch.
Craig you’re a wild man for wearing those crispy brand new Nicks? Whites? boots while pouring concrete 😮
Have you ever, and would you ever do anything with Meranti Wood? Dig the videos ✌🏼
11:25
17 gallons.
That's $1545 in silicone alone, according to the link provided.
Forget about the additional costs of everything else.
That's not even close to being affordable for most, and you cut up the mold after a single use.
Not many people are going to replicate this idea, it's simply too expensive...
Sold me! I bought beard oil for my glorious stache and a tee shirt. Long time viewer, back to the og boat. Thanks for entertainment and inspiration
Careful buying products from these youtubers.. they don't care about the products, only the paychecks they provide. Remember, they all pushed fake knives and deeds that were meaningless..
@@FJB2020 I can’t tell if you are joking or not. If not, I’ll take my chances on some beard wax and a t shirt and probably survive
@@FJB2020 in this case it seems like products he's developed and uses for himself, not sponsor/ads like those products you mentioned. But I do 100% agree I never pay any attention to any sponsorships on any video and I don't think any creators really care beyond that paycheck when it comes to doing those ad spots.
Little suggestion if you're going to move it in the future.
The silicone form/pad.
Tuck it inside the concrete "barrel" if you need to move it again.
I love it! You know you are going to have to move it every time your wife want to vacuum...
I was concerned about how much that base was going to scrape up your flooring. I see you brilliant wife has layered her area rugs.
That is a cool project.
I laughed so hard when you said “hot glue” 😂
Very nice. Other than the math, it really doesn't LOOK like a project only a pro with expensive tools can complete. Thanks for the inspiration for my patio.
I'd argue the math was the easiest part of this build. Come on
@@YourFavouriteComment - Yea, maybe... but he made it LOOK easy enough I am willing to try it... the math on the other hand... Have a great day!
The Foreman has gotta get that technique patented! Rivals the hip-thrust haha
That's beautiful.
Nicely done
I am very grateful that you exist man :) need to read a bit more about the shaper origin as it still looks like dark magic to me
Outstanding!!
One suggestion for the silicone mould, could you have used on the ground over the steps to roll the table instead of lifting it, and then when you get to the small cut section, place the large section to continue rolling? Just an idea